Redownload installed packages

hi,
I'd like to know how to redownload (without install) all my installed packages, I've found this:
http://bbs.archlinux.org/viewtopic.php?id=18728
and tried the script:
for package in `pacman -Q | awk '{ print $1 }'`; do yes | pacman -Sw $package; done
but it doesn't download anything in my pacman cache...
the thread is old (2006) and I'm sure there have been a lot of modifications in pacman, so can someone help me correcting that script?
thanks for your help
_Marco_

kjon wrote:
You made my "poetry" worth crap.
Those were completely different approaches... The very long one, and the arch one...
You can start by writing a long approach that works, and then try to find a more elegant one, no problem with that.
But generally speaking, it's very easy to write a script longer than necessary, because writing short ones require both knowledge
of all the neat tools like grep,sed,cut,tr,find, etc and experience of combining them all together.
To be honest, this need of reinstalling or re-downloading all installed packages comes up regularly, so you can find that my solution
was already suggested before in this forum, but that there were also several more verbose solutions similar to yours.

Similar Messages

  • Redownload and reinstall all installed packages

    I need to redownload and reinstall all installed packages, because I made some tests with prelink and something goes wrong. I found an article in wiki that covers download of installed packages, but howto reinstall them all?
    The problem is that some apps are acting weird. I also have problem with compiling of AUR packages, because I get this error message:
    checking how to recognise dependent libraries... pass_all
    checking how to run the C preprocessor... /lib/cpp
    configure: error: C preprocessor "/lib/cpp" fails sanity check
    See `config.log' for more details.
    make: *** No targets specified and no makefile found. Stop.
    The gcc package is installed. Any sugestions?
    Last edited by macros78 (2007-09-09 12:19:21)

    I think this should do it...
    pacman -Q | grep -v pacman | cut -d' ' -f1 > packages.txt
    pacman -Sy `cat packages.txt` --noconfirm

  • Need to redownload all installed packages [SOLVED]

    I found the redownloading all installed packages wiki page, but when I attempt either of the suggested commands on the page, pacman chokes on the first package that I installed out of the AUR.  Can someone recommend how I can simply download all of my currently installed packages to my local db?
    Thanks!
    # pacman -Sdw --noconfirm `pacman -Q | awk '{ print $1 }'`
    # wget $(pacman -Sdp `pacman -Q | awk '{ print $1 }'`)
    Last edited by graysky (2009-08-18 19:26:57)

    I actually think it does... when I use your shell command after all my packages are populated, I get a line that reads, "checking package integrity..." then a fresh shell.
    VERIFIED: it does indeed.  I removed /var/cache/pacman/pkg/zvbi-0.2.33-1-x86_64.pkg.tar.gz then touched an empty file of the same name.  After re-running your command, pacman detected the problem, removed the offending package and re-downloaded when I ran it a second time.  Smart
    checking package integrity...
    :: File zvbi-0.2.33-1-x86_64.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n]
    error: failed to commit transaction (invalid or corrupted package)
    zvbi-0.2.33-1-x86_64.pkg.tar.gz is invalid or corrupted
    Errors occurred, no packages were upgraded.
    Last edited by graysky (2009-08-18 21:14:48)

  • Can't download itunes. keep getting message. message"this instillation package could not be opened. verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid windows installed package".

    Ever time I try to download itune on my new packard bell I get the message "this instillation package could not be opened. verify that the package existsmand that you can access it or contact the application vendor to verify that this is a valid windows installed package" PLEEEEASE someone help me as I've lost all of my music!

    tried downloading the quicktime installer, I get the same message with it too

  • I have FF 3.6.25 and can't install the yoville zynga gamebar i get an error msg that its not a valid install package - 207. can someone help me with this so that it will work?

    i'm running ff 3.6.25 and can't install the yoville zynga gamebar the message i get is as follows:
    Firefox could not install the file at http://zynga.ourtoolbar.com/xpi because: Not a valid install package -207
    i installed it on my mom's pc after installing ff to it and it worked fine.

    Hi,
    You may have to update Firefox. Please also check the Firefox version on mom's PC: '''Help''' ('''Alt''' + '''H''') > '''About Firefox'''.
    https://www.mozilla.org/en-US/firefox/new/
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]

  • Adobe Air Install Package Signed by Revoke Certificate?

    My security settings may be a little more strick than most. I just download the adobe air install package today. I think the revoked signature is preventing the installation. Can anyone confirm the signature? Thanks.

    No problems with the signature on a new Windows 7 x64 / IE10 install with default settings .

  • No longer able to install packages

    HI,
    My remote desktop (3.5.1) crashed about a week ago. After the crash I have been unable to "Install packages" to any client from this laptop.  There have been no changes in our network, or the client machines, or my login/password.
    Under ARD preferences I've even set it to Full access for non-admins, just in-case.  The client machines do allow installs in their remote desktop settings.  I do have another machine with ARD 3.5.1 and CAN successfully install from that machine to the same clients. 
    I am able to copy, and run unix commands-  only Install seems to be affected.  Any ideas what might be causing this?

    Try this link:  https://discussions.apple.com/thread/3213196?tstart=0
    Which hopefully takes you to a post by Scooter Magrooter that basically says
    1. Open Remote Desktop Preferences/Task Server
    2.  Select to use a remote task server.
    3. Put in an IP - scooter says any IP, I am much more successful with the IP of the computer I am on.
    4. Probably will be asked for username and password.
    5. Mine jumps back to "use this computer" automatically.  If not, select that and close out.
    Now try it.
    I have to do this regularly.  Annoying, but liveable.
    Hope this does it for you.
    Chicster

  • The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

    The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

    There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks.  You might want to do a search on that topic and see if anyone has a solution.  There have been various versions of the problem but a lot related to errors in the download package or failure to download.

  • How to install packages from local folder

    Hi all,
    I have downloaded all arch linux packages from the following URLs:
    ftp://mirrors.kernel.org/archlinux/core/os/i686/
    ftp://mirrors.kernel.org/archlinux/extra/os/i686/
    ftp://mirrors.kernel.org/archlinux/community/os/i686/
    and then have saved them to an external hard disk. Then I have attached that external hard disk to my system and packages are available in following folders:
    /mnt/external_hd/Arch_Linux/Core-OS/
    /mnt/external_hd/Arch_Linux/Extra-OS-1/
    /mnt/external_hd/Arch_Linux/Extra-OS-2/
    /mnt/external_hd/Arch_Linux/Community-OS-1/
    /mnt/external_hd/Arch_Linux/Community-OS-2/
    /mnt/external_hd/Arch_Linux/Community-OS-3/
    Now I want to install some or all packages from these folder with the help of pacman command. I am seeing that package corresponding to wvdial command is available in the /mnt/external_hd/Arch_Linux/Extra-OS-1/ folder. But how to use pacman command so that I can install wvdial package from that folder?
    In addition to this if I want to install ALL Extra Packages available in the folders /mnt/external_hd/Arch_Linux/Extra-OS-1/ and /mnt/external_hd/Arch_Linux/Extra-OS-2/ then how to execute the pacman command?
    Please send me step by step instructions so that I shall be able to install some or all downloaded packages.
    I shall remain thankful for this forever.
    Best Regards ...
    Pankaj Kumar

    Hi fukawi2,
    Thanks for reply and searching for my username on google. It is true that I am a freelance s/w developer but I am not installing Arch Linux for any client. I am installing it due to some other reasons. In fact I started working on Red Hat and then on Fedora when I was a student of bachelor degree course in computer applications. Then later I searched open suse and started using it. I am using open suse from its 10.1 version. However the recent version of this distribution has become much resource consuming. So I am in the need of a light weight linux distribution. And I encountered Arch Linux. Then I purchased its installation disk from an online shop and installed it on my system. But only text mode is working at this moment. Since I want to use X window and so I started to follow the syntax of pacman command. But it is connecting to internet. Since my internet connection is slow (average speed of 10kbps) and so I requested the same online shop to download all packages from Arch Linux repository and send them to me. Therefore now I am having all those packages in my local external hard disk drive in the folder mentioned in my first post. Now I want to install packages from these folder. And so in order to get help I have come to this forum.
    I have also followed the steps given on the pages https://wiki.archlinux.org/index.php/Pa … l_commands and https://wiki.archlinux.org/index.php/Pa … repository. But when I am trying to install a particular package using the following command:
    pacman -U wvdial
    then it is asking for a dependency. I know that  the dependent package in my local folder but why it is not being automatically taken by pacman command? Can you please explain it.
    That is why I am asking help only for customization and usages of pacman in order to install packages from local folder. But each member in this forum is only referring to long written manuals and not giving me exact solution which I think will involve four/five steps.
    Best Regards ...
    Pankaj Kumar

  • I uninstalled itunes, and tried to redownload/install it, now I can't even get it installed, it says " The feature you are trying to use is on a network resource that is unavailable" What do I do to get itunes back

    I Removed itunes from my pc, and tried to redownload/install it, now i can't even get it installed, it says " The feature you are trying to use is on a network resource that is unavailable" What do i do to get itunes back on my pc?

    This kind of problem can often be fixed with the  microsoft Installer cleanup utility.
    Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
    Google  msicuu2.exe download
    mydigitallife in the above search has a copy of version 3
    Check for malware before installing it.
    After installing, To run the program  – All Programs>>Windows Install
    If you get  permission denied error, Try Run as Administrator – an option if you right click on the program.
    When you run the cleanup utility, look for any instance that you find of iTunes and remove it.
    It is possible that you will have to remove other apple programs if removing iTunes doesn't allow you to install iTunes. Post back with any furtyher error messages if there is a problem.

  • Where is the install package stored from the app store for Lion?

    This is an all new way of deploying OS updates from Apple. From what I can see, this presents some issues:
    1. Where is the install package that I bought from the app store, and how can I save that offline?
    2. If there's a problem with my device in the future, I have no media of Lion to restart from- so what's the procedure to restore from a TM backup? Go back to 10.6, and then to the 10.7 update?
    3. What if I want to boot from disc or a drive? I don't have a copy of the install to make a bootable image.
    Thanks for the help

    OK, once you install Lion the Installation Package gets deleted. However once you have installed Lion, do following:
    - Open the AppStore Application
    - With pressed Option (on German Keyboard ALT) Key klick on the "Purchased" Tab!
    - You will now see that the prviously greyed out "Install" key for Lion becomes active
    - Download the install package
    - Do not start installation
    - In order to create a bootable DVD or USB drive containing the installer follow instructions posted on
    http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml
    This is how you can create installation media.
    For maintenance options (means your Lion installation has some problems but your drive is still OK)
    you can boot from the hidden recovery partitions that was created when you installed Lion.
    To do so, press the Option (ALT) Key while booting. You will have now the option to boot from
    Lion or recovery partition.
    Hope this helps!

  • [SOLVED] cannot install package query

    I want to install yaourt, but I can't seem to install package query. I acquired the tarball from here and followed all the steps here
    [maarten@maarten ~]$ cd ~/src
    [maarten@maarten src]$ tar -zxvf package-query.tar.gz
    package-query/
    package-query/PKGBUILD
    [maarten@maarten src]$ cd ~/src/package-query
    [maarten@maarten package-query]$ makepkg -s
    ==> Making package: package-query 1.0.1-1 (Sun Jul 8 11:09:03 CEST 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Downloading package-query-1.0.1.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 361k 100 361k 0 0 205k 0 0:00:01 0:00:01 --:--:-- 226k
    ==> Validating source files with md5sums...
    package-query-1.0.1.tar.gz ... Passed
    ==> Extracting Sources...
    -> Extracting package-query-1.0.1.tar.gz with bsdtar
    ==> Starting build()...
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking for gcc... gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking how to print strings... printf
    checking for a sed that does not truncate output... /bin/sed
    checking for grep that handles long lines and -e... /usr/bin/grep
    checking for egrep... /usr/bin/grep -E
    checking for fgrep... /usr/bin/grep -F
    checking for ld used by gcc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
    checking the name lister (/usr/bin/nm -B) interface... BSD nm
    checking whether ln -s works... yes
    checking the maximum length of command line arguments... 1572864
    checking whether the shell understands some XSI constructs... yes
    checking whether the shell understands "+="... yes
    checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
    checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
    checking for /usr/bin/ld option to reload object files... -r
    checking for objdump... objdump
    checking how to recognize dependent libraries... pass_all
    checking for dlltool... no
    checking how to associate runtime and link libraries... printf %s\n
    checking for ar... ar
    checking for archiver @FILE support... @
    checking for strip... strip
    checking for ranlib... ranlib
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for sysroot... no
    checking for mt... no
    checking if : is a manifest tool... no
    checking how to run the C preprocessor... gcc -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking for dlfcn.h... yes
    checking for objdir... .libs
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC -DPIC
    checking if gcc PIC flag -fPIC -DPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking if gcc supports -c -o file.o... (cached) yes
    checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... yes
    checking ctype.h usability... yes
    checking ctype.h presence... yes
    checking for ctype.h... yes
    checking getopt.h usability... yes
    checking getopt.h presence... yes
    checking for getopt.h... yes
    checking libintl.h usability... yes
    checking libintl.h presence... yes
    checking for libintl.h... yes
    checking limits.h usability... yes
    checking limits.h presence... yes
    checking for limits.h... yes
    checking locale.h usability... yes
    checking locale.h presence... yes
    checking for locale.h... yes
    checking sys/ioctl.h usability... yes
    checking sys/ioctl.h presence... yes
    checking for sys/ioctl.h... yes
    checking sys/utsname.h usability... yes
    checking sys/utsname.h presence... yes
    checking for sys/utsname.h... yes
    checking for alpm_version in -lalpm... yes
    checking for yajl_free in -lyajl... yes
    checking for gawk... (cached) gawk
    checking for curl-config... /usr/bin/curl-config
    checking for the version of libcurl... 7.26.0
    checking for libcurl >= version 7.19.4... yes
    checking whether libcurl is usable... yes
    checking for curl_free... yes
    checking whether NLS is requested... yes
    checking for msgfmt... /usr/bin/msgfmt
    checking for gmsgfmt... /usr/bin/msgfmt
    checking for xgettext... /usr/bin/xgettext
    checking for msgmerge... /usr/bin/msgmerge
    checking for ld used by GCC... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for shared library run path origin... done
    checking for CFPreferencesCopyAppValue... no
    checking for CFLocaleCopyCurrent... no
    checking for GNU gettext in libc... yes
    checking whether to use NLS... yes
    checking where the gettext function comes from... libc
    checking for git... git
    checking for .git/... no
    configure: creating ./config.status
    config.status: creating src/Makefile
    config.status: creating doc/Makefile
    config.status: creating Makefile
    config.status: creating config.h
    config.status: executing depfiles commands
    config.status: executing libtool commands
    config.status: executing po-directories commands
    package-query:
    Build information:
    source code location : .
    prefix : /usr
    sysconfdir : /etc
    conf file : /etc/pacman.conf
    localstatedir : /var
    database dir : /var/lib/pacman/
    compiler : gcc
    compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
    package-query version : 1.0.1
    using git version : no
    git ver :
    Variable information:
    root working directory : /
    aur base url : [url]http://aur.archlinux.org[/url]
    make all-recursive
    make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    Making all in src
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
    mv -f .deps/aur.Tpo .deps/aur.Po
    gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
    alpm-query.c: In function 'alpm_pkg_get_realsize':
    alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
    mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
    gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
    util.c: In function 'ltostr':
    util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
    util.c: In function 'itostr':
    util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
    util.c: In function 'concat_backup_list':
    util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
    util.c: In function 'string_fcat':
    util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
    mv -f .deps/util.Tpo .deps/util.Po
    gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
    mv -f .deps/color.Tpo .deps/color.Po
    gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
    mv -f .deps/package-query.Tpo .deps/package-query.Po
    /bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
    libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    Making all in doc
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[2]: Nothing to be done for `all'.
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    ==> Entering fakeroot environment...
    ==> Starting package()...
    Making install in src
    make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    test -z "/usr/bin" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/bin"
    /bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/maarten/src/package-query/pkg/usr/bin'
    libtool: install: /usr/bin/install -c package-query /home/maarten/src/package-query/pkg/usr/bin/package-query
    make[2]: Nothing to be done for `install-data-am'.
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
    Making install in doc
    make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[2]: Nothing to be done for `install-exec-am'.
    test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/share/man/man8"
    /usr/bin/install -c -m 644 package-query.8 '/home/maarten/src/package-query/pkg/usr/share/man/man8'
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
    make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    make[2]: Nothing to be done for `install-exec-am'.
    make[2]: Nothing to be done for `install-data-am'.
    make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package...
    -> Generating .PKGINFO file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: package-query 1.0.1-1 (Sun Jul 8 11:09:18 CEST 2012)
    [maarten@maarten package-query]$ dir
    PKGBUILD package-query-1.0.1.tar.gz src
    package-query-1.0.1-1-i686.pkg.tar.xz pkg
    [maarten@maarten package-query]$ sudo pacman -U package-query-1.0.1-1-i686.pkg.tar.xz
    Password:
    loading packages...
    error: 'package-query-1.0.1-1-i686.pkg.tar.xz': invalid or corrupted package (PGP signature)
    I already reran pacman-key --init and pacman-key --populate archlinux after removing the allready acquired signatures (/etc/pacman.d/gnupg). But it keeps returning the same error.
    Do I need to add another key manually to install packages manually from the AUR?
    Last edited by maartennnnnnn (2012-07-08 09:44:01)

    I edited your post to change the \[quote\] tags to \[code\] tags - it makes for a much easier to read post
    https://wiki.archlinux.org/index.php/Fo … s_and_Code
    Two options are to change your SigLevel or sign your own key...

  • Acrobat 9 Professional simplified Chinese install package address

    We have been purchased Acrobat 9 Professional simplified Chinese licences for many years, but we lost the install file, Could you give us the install package address for it? PS: There are only language English/ French/ German / Japanese on the public page: http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • Error in installing packages during jumpstart

    The machine I am installing via jumpstart is on a terminal server and I am connected to ttya. I am seeing these errors in the log:
    ## Executing postinstall script.
    pkgadd: ERROR: freopen(/dev/tty, "a", stdout) failed, errno=6
    pkgadd: ERROR: postinstall script did not complete successfully
    and I am told the installation failed with an error code of 1 which, according to the pkgadd man page it a fatal error.
    When I do a pkginfo -l on the package it appears that the package is there. Is this something to worry about?
    If it means anything, this is the java 1.4.2_02 packages.
    Kent

    You might want to redirect stdout & stderr to /dev/null while installing packages via run-scripts (I'm assuming that 's the case).
    So, when you're doing the pkgadd, do it like this:
    echo y|pkgadd -a ${MD_PRODUCT}/admin -d `pwd` SUNWmdr > /dev/null 2>&1
    Here I'm trying to install a disksuite pkg as a post-install and it givees me the same error messages that you get if I don't redirect 2>&1 to /dev/null
    HTH     

  • Installing packages as system

    Hi everyone.
    I have a question regarding installing packages and procedures. Lets assume, I am installing a procedure called "db_procedure" and I want it to be created under schema "EMP". My create or replace statement looks like this:
    Create or replace procedure EMP.db_procedure as
    Now, lets assume that I log into database as system and run this procedure. This procedure will be created under "emp" schema not system as I have the schema name attached to the procedure name.
    My question is, is there any difference in running this procedure as system and running it as "EMP". My understanding is that as long as I add the schema name to the procedure name in the create or replace statement, there is no difference.
    Create or replace procedure EMP.db_procedure as
    I just wanted to understand what goes on behind the seems in oracle when you install this procedure as system. How is it different (if any) from installing it as "EMP".
    I believe there is none.
    Thanks

    user13118348 wrote:
    My question is, is there any difference in running this procedure as system and running it as "EMP". My understanding is that as long as I add the schema name to the procedure name in the create or replace statement, there is no difference.
    Create or replace procedure EMP.db_procedure as
    I just wanted to understand what goes on behind the seems in oracle when you install this procedure as system. How is it different (if any) from installing it as "EMP".
    I believe there is none.
    I would say you are right. Allthough it would not be my preferred choice of deploying a procedure in the EMP schema. I would just connect as EMP and run it inside that session.

Maybe you are looking for