Redrawing a logo for LOW resolution

Greeting, can someone send me some tutorials about how can I redraw or how should I think if I'm making a logo design for low resoltuion use, or for small dimensions. ex: for spoons, small badges, etc

trialboj,
There will rarely be any reason to redraw for low resolution, unless you wish to make sure that the individual artwork objects/parts are confined to whole pixels in connexion with web/other screen use, in which case you may work with a pixel grid and with Align to Pixel Grid ticked, but that may not be very nice to look at.
For small scale use, you can still use vector artwork, especially for print tasks where you may use PDF or AI, or you can set the pixel x pixel size in connexion with Save for Web (and Devices) or the resolution in connexion with Export to raster formats; in connexion with the latter, you may also just leave it at a higher resolution than strictly necessary.
But if possible, it is always best to keep the artwork as vector and let the outputting device make the best of it (literally).

Similar Messages

Configure Xorg for lower resolution...

Hi folks,
I need some help trying lower resolutions on my laptop.
I's a Lenovo T61 with nVidia Quadro FX 570M graphics card (rev a1)
Installed the "nvidia" driver and used the nvidia-config to set the xorg.conf settings.
Max resolution is: 1680x1050 wich is working and is default..., I want to try out 1440x900 and 1280x800 (all three are 16:10)
This is my current config:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection
Tried to add these lines under Section "Screen" but no change in the outcome...=(
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
Any hints?

I mean static, not fuzzy if I set resolution to 1080p.

How do I uncheck the "open in low resolution" box for Acrobat Pro 10.1.10 in a MBP with retina display?

I have the "open in low resolution" box checked by default and I can not uncheck it because it is shaded out. I already tried the "uninstall Acrobat, delete the 'com.adobe.PDFAdminSettings.plist' file, and reinstall" solution, but it did not work. I am using Adobe CS6, acrobat pro 10.1.10, macbook pro w/ retina display, and OS X 10.9.4.

I don't think Acrobat 10 is capable of that. Only the very latest Acrobat 11 update has some concessions for Retina displays.

Low resolution albumart when connected to 'made for Ipod' ICE-systems.

I've recently installed a new stereo in my car. It is 'made for Ipod', and should therefore work great with my new Ipod Touch (3G) 32GB. And it does, in all ways but one. The albumart, shown on the stereo, looks really poor (with low resolution).
I've spent some time looking for info in this matter on the net. Apparently the same problem occurs with many different brands of ICE-systems (In Car Entertainment). According to posts on other forums this problem came with a recent firmware upgrade (v3.0?), and possibly has something to do with coverflow. Older versions of Ipods apparently shows crisp albumarts on these stereos (can't confirm this, my Ipod is too new).
Since it seems it could be a software related problem, can one expect a fix in future firmware upgrades? Or is this something I/we have to live with (due to limitaitons in the hardware)?

I'm having a similar problem. I can pair my ipod nano with my BT speakers first time and work perfect, but the next time I try to play music through the speakers I MUST do a manual connection beacuse the nano not auto connects with ANY paried devices. I mean, the BT speakers appears as paried, but not connected
I am extremely frustrated too.
Any idea?
Tested with diferent devices with same behaviur.

How do I save a picture in a lower resolution for the website

How do I save a picture in a lower resolution for the website

Check the App Store for apps that allow you to change the pixel dimensions of the photo. I use PhotoForge2 and it does a wonderful job of that by allowing you to move a slider to change the dimensions of the photo. Unfortunately Google purchased the company that made photoforge and it is no longer in the App Store. Thee are undoubtedly some other apps that will do what you want.

Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome.

Exporting low resolution of RAW timeline for review

Hi
I really like working with RED RAW files in Premiere CC. Successfully completed a 60 minute video, exported multiple versions and delivered.
It has worked out quite well despite a few crash glitches here and there. Worked through those with the help of this valuble Adobe community.
I'd like to know how to export out a rough, low-resolution review file of my un-rendered RED RAW timeline for client's review? There isn't much point spending 5 hours rendering and exporting a high resolution file, only to reduce it down to an iPod quality so the client can easily download for review and suggest modifications.
Is it even possible to output without rendering, and if yes, how?
Any feedback shall be much appreciated.
Thank you

Hello,
"I'd like to know how to export out a rough, low-resolution review file of my un-rendered RED RAW timeline for client's review?"
Open up the export dialog by hitting Ctrl+M while your timeline is open. A good place to start for low file sizes is choosing the H.264 option. Afterward, you can scroll through the presets until you find options for small devices such as iPod.
Don't select 'Use Maximum Render Quality' as that will certainly not be necessary in your case and may just add time to the export.
"Is it even possible to output without rendering, and if yes, how?"
If there is a red bar in your timeline, you can choose to render the indicated items prior to exporting. If you do render them, you can check the box 'Use Previews' during the export dialog, and that will save the respective time from the export.
But either way, your computer will need to process those items at some point before outputting a file.

Low resolution Illustrator file needs to be changed to high resolution?

I created a logo for a client in Illustrator that they were going to use on large format banners. The file contained one Photoshop image that I imported into my Illustrator file and changed into a vector object. I also outlined all type. The only other items on the logo were colors done in CMYK. The client now says the overall image was done in 'low resolution' and needs to be in 'high resolution' but I'm confused about what part of the design she would be referring to (as, as far as I know) there are no pixels that would pertain to resolution - (unless the CMYK color builds translate into a problem?).
As she is a new designer for a client (my friend) I'd like to get some feedback before I just ask her what she's talking about and embarrasing her (or me).
Any thoughts? Thanks.

I'll note... after reviewing my file, the only other thing I noticed was under Document Setup, the Transparency preset was at 'Medium' instead of 'High' resolution, but here again, I thought this was a non-factor because as far as I know there is no 'transparency' (no jpegs, effects, etc.)... just the vector items that I noted.

Low Resolution on iPhone 5c

I've owned an iphone 4s, 5, and now a 5c. How can I tell what the resolution is on my photos? When I upload photos to a developer website such as Walmart, I always get the same message...my photos are LOW RESOLUTION. Please help...how do I fix that???

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

Printing picture in low resolution

I want to print Logo in Label Printer. But it is printing in low resolution.
The dimensions of the Picture are 1,5 cm x 1,5 cm.
When I insert the picture (dimensions 317 pixels x 292 pixels) in CR , I change Xscaling and Yscaling.
When I printing CR, the picture is printing in resolution 62 pixels x 57 pixels.
I want to print Logo in high resolution.
Help me, please.

My version is Crystal Reports for Visual Studio 2003 .NET service pack 1
Thank you very much, but in this version not exists this Check.¿?
I have installed Crystal Reports 2008 (Trial versión), have open proyect VS and have printing picture in high resolution.
I have installed Hotfix CR and all updates Visual Studio 2003 .NET
I do not believe that it is necessary to change the version to solve this problem.
Regards,
David
Edited by: Navarro, David on Feb 11, 2010 11:51 AM

High resolution PDF still generates low resolution drop shadows?

I have created a series of print ads in InDesign CS5.5 to be run in magazines, and at the bottom of the page is the company's logo, with a drop shadow applied to it within InDesign. Nothing strange there. Upon exporting the PDF, I use the Press Quality settings which by default are made to create 300 dpi PDFs. The only changes I make in the settings is adding bleed and crop marks, I don't change anything that could affect the resolution or transparency settings. But still, the magazine's print-technician always replies that the shadows in my document have a low resolution.
Up until now I have told him to not worry and run it anyway, and the results have been fine - I haven't noticed any problems with the quality of the print in the magazine. But it really annoys me that I keep getting these error messages - I want to create perfect PDFs! Why on earth are my shadows ending up as low resolution images?
The only thing I can imagine might be a sign of an issue is under the Advanced-tab in my Export-settings. The Transparency Flattener section (which I, to be honest, am not quite sure what it is) is set to medium resolution, and is greyed out - meaning I can't change it to high resolution. Could this be what is causing it? And if so, how do I fix it?

I don't spend a lot of time with Acrobat's preflight, but it looks like it assumes what the flattener preset will be at output even though it could be anything.
The default Press Quality preset exports live transparency with the flattener grayed out as Medium and it looks like Acrobat preflight considers that even though nothing has been flattened yet. So, here I've made a 3" sqaure box and exported it with Press Quality and prefilght tells me it's roughly 200ppi (which by the way is plenty for a dropshadow):
If I change the preset to High (set the Compatibility to 1.3, which lets you set the flattener to High, then reset compatibility to 1.4):
Then Acrobat's preflight tells me the shadow will have more resolution:

After OS X update moving 1:1 images results in low resolution and a long delay to snap into high res

After the OS X 10.8.5 update on my current generation 27' iMac moving 1:1 images results in very low resolution for those areas I am moving to with as long as a two second delay before the image snaps back into full resolution. Not only that but when it snaps back into full resolution you see a shift in alignment and a snapping into place with the nearby area that was already in full resolution. This is awful and is occuring with Lightroom 5 and 5.2. Has anyone experienced this?
My iMacs specs are the current generation 27" iMac, i7 3.4 Ghz, 32GB RAM, and the NVIDIA GeForce GTX 680MX 2GB running OS X 10.8.5.
I did not have this issue with OS X 10.8.3.

I have noticed something similar on my Win7x64 system, but am not able to reliably reproduce it. It seems, for me at least, to be a combination of +Clarity and Lens Profile Correction which will always trigger an observable screen redraw when moving from segment to segment in 1:1 view mode. The variable is the delay.....most often it's a fleeting effect, but occasionally there's a more obvious delay in redrawing the image display. I suspect the more obvious delay is, in addition to the +Clarity and Lens Correction, some internal resource utilisation over a longer Lightroom session....certainly every time I've encountered it a Lightroom restart has cleared it up.
Don't know it that helps, or gives you any pointers to reducing the impact. Because of another "issue" with Lens Corrections (when it's applied, Spot Removal work gets slower), I tend to apply it last of all when editing pictures....so that also helps avoid this 1:1 screen redraw problem.

Startup Screen at very low resolution

When ever I turn on my macbook pro (late 2011) the start up screen with the white background and the apple logo is at a very low resolution and has black bars on eithier side of the screen. Then when it switches from that to the login screen the transition between the two screens is very pixelated. Then when it gets to the login screen everything is perfectly fine. How do I fix this? Thanks.

Hello Reagan,
Welcome to the Apple Support Communities. The easiest way to solve the problem, is to reset the NVRAM, the following article will give information on what it is and how to go through that process.
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Regards,
-Norm G.

My address book and iPhone pics have become low resolution. Is there a way I can prevent this from happening when I start out with a higher resolution picture?

I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

[SOLVED]Terminal at Lower Resolution

Hello,
I am on Arch linux with Gnome (GDM) and I have a question-
1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
I also did
Tips and tricks
Fixing terminal resolution
Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
GNU nano 2.2.6 File: /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 75.0
VertRefresh 43.0 - 72.0
Option "PreferredMode" "1366x768"
ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
/var/log/Xorg.0.log -
[ 418.253]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 418.253] X Protocol Version 11, Revision 0
[ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
[ 418.253] Build Date: 14 March 2015 06:45:50PM
[ 418.253]
[ 418.253] Current version of pixman: 0.32.6
[ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
[ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
[ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.333] (==) ServerLayout "Layout0"
[ 418.333] (**) |-->Screen "Screen0" (0)
[ 418.333] (**) | |-->Monitor "Monitor0"
[ 418.333] (**) | |-->Device "Device0"
[ 418.333] (**) |-->Input Device "Keyboard0"
[ 418.333] (**) |-->Input Device "Mouse0"
[ 418.333] (==) Automatically adding devices
[ 418.333] (==) Automatically enabling devices
[ 418.333] (==) Automatically adding GPU devices
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 418.371] Entry deleted from font path.
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 418.371] (==) FontPath set to:
/usr/share/fonts/misc/
[ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 418.371] (WW) Disabling Keyboard0
[ 418.371] (WW) Disabling Mouse0
[ 418.384] (II) Loader magic: 0x815d80
[ 418.384] (II) Module ABI versions:
[ 418.384] X.Org ANSI C Emulation: 0.4
[ 418.384] X.Org Video Driver: 19.0
[ 418.384] X.Org XInput driver : 21.0
[ 418.384] X.Org Server Extension : 9.0
[ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 418.392] (II) LoadModule: "glx"
[ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
[ 419.025] compiled for 4.0.2, module version = 1.0.0
[ 419.025] Module class: X.Org Server Extension
[ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 419.035] (II) LoadModule: "nvidia"
[ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 419.099] compiled for 4.0.2, module version = 1.0.0
[ 419.099] Module class: X.Org Video Driver
[ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 419.106] (--) using VT number 2
[ 419.162] (II) Loading sub module "fb"
[ 419.162] (II) LoadModule: "fb"
[ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 419.182] (II) Module fb: vendor="X.Org Foundation"
[ 419.182] compiled for 1.17.1, module version = 1.0.0
[ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 419.182] (II) Loading sub module "wfb"
[ 419.182] (II) LoadModule: "wfb"
[ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 419.184] (II) Module wfb: vendor="X.Org Foundation"
[ 419.184] compiled for 1.17.1, module version = 1.0.0
[ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.184] (II) Loading sub module "ramdac"
[ 419.184] (II) LoadModule: "ramdac"
[ 419.184] (II) Module "ramdac" already built-in
[ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 419.195] (==) NVIDIA(0): RGB weight 888
[ 419.195] (==) NVIDIA(0): Default visual is TrueColor
[ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
[ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 420.274] (II) NVIDIA(0): Vision stereo.
[ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
[ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
[ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 420.297] (--) NVIDIA(0): CRT
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): DPY-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-0
[ 420.297] (--) NVIDIA(0): DPY-1
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
[ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
[ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
[ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
[ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
[ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
[ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
[ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
[ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
[ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
[ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
[ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
[ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
[ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
[ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
[ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
[ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
[ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
[ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
[ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): DPY-2
[ 420.297] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
[ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
[ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
[ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
[ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
[ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
[ 420.298] (II) NVIDIA(GPU-0):
[ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
[ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
[ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
[ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
[ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
[ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
[ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
[ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) N

karol wrote:
newguy wrote:These commands give no such file or directory
Did you install uvesafb?
Install v86d from AUR
This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
Prepare the system
Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
$ grep vga /proc/cmdline
$ grep -ir vga /etc/modprobe.d/
Should return no results. If you do have a vga= option somewhere, you will need to remove it.
It didn't
GRUB
Note: This might not work.
First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
Then regenerate grub.cfg via the standard script:
# grub-mkconfig -o /boot/grub/grub.cfg
Did this
Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
Last edited by newguy (2015-03-21 10:21:29)

Redrawing a logo for LOW resolution

Similar Messages

Maybe you are looking for