Reds in my images turn orange only in Lightroom, PS CS3, and Bridge

Hello everyone, I have yet another issue that has to do with my earlier post 2 days ago...
For some reason, all of my images that contain the color red turn orange when they are opened in Lightroom 1.4, Photoshop CS3 10.1, or Bridge 2xxx.
But my images with red look red on my desktop, it's just when I open them in the three products listed above- they turn orange.
Any image that I have shot also loses its red color in the Finder view of my MacPro OSX 10.5.8.
The images are red on the camera display after I shoot them, but when they get into my Adobe products or the Finder view of my MacPro, the reds turn orange.
I shoot with Canon DSLR's and I am a professional photographer.
I'm not sure what to do, I have work that needs to go to clients, but I don't think these orange reds are going to go over well.
Anyone have any ideas on what is going on?
Any help or ideas would be greatly appreciated.
Thanks everyone

I just did a monitor calibration with my i1display2 from gretagmacbeth.
How do I find that out, where, what to do?
Reds on websites, icons, and things look fine on my Apple Cinema HD 30" screen, it's just camera files that reds turn into orange
Help...

Similar Messages

My reds are turning orange only in Lightroom

My reds are coming out orange in Lightroom, following a Lightroom update about a month again. I have now upgraded to Lightroom 5 and still have the same problem. The monitor is ok.

This sounds like a camera profile issue or a default-settings-off issue.
What camera model?
What camera profile do you have set in Camera Calibration down at the bottom of the righthand panel in Develop?
What OS version?
How do you calibrate your monitor: Spyder, i1Display, ColorMunki, etc?
Can you show us what you mean with a screenshot attached to a forum message using the web interface to the forums?

HT1476 my iphone wont turn on only when its pluged in and turns of and on while charging

it wont charge

chui32 wrote:
my iphone wont turn on only when its pluged in and turns of and on while charging
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT4528 phone wont turn on only apple icon flashing

phone will npt turn on.while charging when you attempt to turn on only the apple icon appears and flashes

You need to use recovery mode to restore:
http://support.apple.com/kb/HT1808

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

It's "aspect ratio", not aspect "ration".
It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length) of that rectangle is.
It's explained in the Help files. I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
Example in next post

Exported Images turn RED

My Equipment:
Nikon D300s
            Color space: Adobe 1998
            Picture Control Setting: Neutral
            NEF files
Mac Computer
            PPC and Intel based processors (problem does not change with computer)
Monitor NEC PA241W wide gamut monitor, calibrated with Spectraview
WD External Hardrive stores all my files
Software
            Lightroom 2 and 3
            Capture One
            Photoshop CS 4
Canon iPF6300
            Up to date print drivers
            Canson paper with icc profiles for printer
Problem: Images Export with Heavy Red Tone
All images appear correct in all software applications. Upon export to the printer, the images appear with heavy red toning in printer preview window. This also happens exporting to file. Image correct appearance in file, then lab produces a heavy red print.
This is the original image from Lightroom 3, zero edit, camera calibration Camera D2X Mode 2 for better Nikon RAW processing.
As far as I can tell, I have calibrated every portion of my system. I have selected the most current printer drivers and icc profiles. However, no matter what I do, this is what I get...
Exporting for print: Canon Printer Preview window opens. This is what the image will look like upon printing.
Shockingly RED!!
This same result happens out of any software program – LR, CS4, Capture One
Any thoughts or input would be greatly appreciated. Very frustrated at seeing red.
Celest

Ok a few more discoveries....I found last night a possible solution.
In continuing research, I found a link on Canon Digital Photography site regarding printing red images. It seems that Canon has traditionally had this problem on new printers. As my iPF 6300 is the new version from the iPF 6100, I thought I would try the correction suggested and so far it seems to work a treat.
The solution: Uncheck the print preview button!
After selecting print from LR, the Print window automatically opens. Select the Main window. At the bottom there is a check box for Print Preview. Deselect this!
This still not giving me a perfect match to my LR image, however it is very agreeable.
In regards to the lab printing. My best results have been in giving the lab sRGB files.   I have only had one lab error with red printing and I gave Profoto RGB space.
Kelly, I'm wondering about your import as DNG...why not NEF? When I import my files as a NEF I can choose a better RAW converter in LR. This is under the Develop Module at the very bottom, Camera Calibration. LR automatically sets the file under Adobe Standard which does not render the same image as the JPEG on the back of my camera. The skin tones are more harsh and have a redder tone. LR has created additional calibration selections for better RAW processing. For skin tones I would recommend using one of the Nikon options...These are listed as Camera D2X Mode 1/2/3. I like the mode 1 or 2 the best as I do portrait work.
Any further thoughts on this Print Preview check selection are greatly appreciated!
Thanks

I have a second generation shuffle and even though (after charging ) the green battery light is on - soon after it turns orange and then red. Is there a problem with the battery and is it fixable?

I have a second generation shuffle and even though (after charging) the green battery light is on it soon turns orange and red. Is there a problem with the battery and if so is it fixable?

If it's a 2nd gen shuffle, it is probably about six years old at this point. The cause is likely to be a worn out battery that is no longer able to hold its charge for very long.
It is technically fixable. This web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle
But it is very small, so you need to be good at doing such things. The cost to have a repair shop do the work is likely to be uneconomical, compared to the cost of a brand new 4th gen shuffle ($50), which has more features (and possibly double the storage) plus a one-year warranty.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Entire image turns black when using the type tool in Photoshop CC

When I create a text layer, the whole image turns black. If I enter the text blindly, I will see the expected results when I finish and click on another tool. If I try to edit the text layer, everything turns black again. I am not using the type mask tool. I can select and move the layer and I can blend the layer; I just can't see what I am typing.
Using Windows 8

I had the same problem and the update of the video card driver did not help - only after changing the settings in photoshop under "Preferences >> Performance >> Advanced settings >> Basic" the problem was solved

Image contains camera White Balance setting; LR 5.5 only shows "As Shot", "Auto", and "Custom"

I have a new, Panasonic DMC-GX7. I shot a bunch of photos as JPGs. When viewing their Exif data using Exiftool, I can clearly see the camera's White Balance setting, as well as the Color Temp Kelvin, WB Red Level, WB Green Level, and WB Blue Level. However, Lightroom 5.5 only shows "As Shot", "Auto", and "Custom" when I click White Balance under Quick Develop on the Library tab or WB under Basic on the Develop tab. Exiftool shows the Exif Version as 0230 and the Panasonic Exif Version as 0405. Is LR looking for the white balance information in some other field? Do I need to configure it somehow for my camera? I am new to LR (but not to image processing), so could use some help figuring this out.

The whole question is not so simple as converting to DNG. Yes DNG is openly documented, yes the file can be read, but that does not mean it can be correctly interpreted by other software in the future and the best you can then do is starting the PP of your images from scratch. Imagine a DNG with LR adjustments that in some years you open the file in another software, possibly non-Adobe. Even if the file can be read it will not look the same, as the Adobe specific developing instructions could not be strictly followed. Even if all software manufactures agreed on a common set of adjustments, let's say everybody had a Highlights slider and a Clarity slider and so on, which is unlikely, the results would still be different as the underlying algorithms would be different.
Disclaimer: I only shoot raw and firmly believe it is the best option, but one must be conscious it has some shortcomings related to the future of our images.

I have an hp a6130n desktop that will shut off without warning. power button turns orange

I have an hp a6130n desktop that shuts off without warning. The fan goes ballistic and the power button turns orange and the only way I can get it back on is to shut off the power strip it is plugged into. Any ideas?

jigsaw1
Your system was released back in May of 2007 so I suspect you've had it for a while. I know that the CPUs have self preservation modes that will react if the processor gets overtaxed. Try cleaning out the system with some of that air in a can stuff. Blow out the heatsink and processor fins and make sure there's not a lot of dust around the vents and inside. Make sure it's got plnty of air flow into the box. When the fan goes crazy it's the system trying to react what it feels is an excessively warm temp inside. It can also happen when you've got a lot of different programs running that strains the system. The information on the webpage for your system (See here) reflects a base memory of 3GBs If you want, another GB of memory might help the system if it's a 32Bit OS or as much as 8 if it's a 64 bit system. I hope this helps address your issue. Regards
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

'''''thedanbot''''':
I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

Images turning black+white

images turning black+white when dragging one image onto another this has only just started happening?

Thanks but this seems to cured itself dont know how of why.Thanks anyway.Allan

Motion crashes after all tumbnails turn orange!! very wierd

I have been having all the thumbnails in my Motion 3 turn orange. Then in about 10 sec or so it crashes. I am working a 3D project. I have re-installed and it did not help.
any sugestions?

i spoke with Apple tech support. They have had calls about this same problem. They think it is the software, not the ATI 1900 card. I can recreate this problem using any outside media. Only happens when working in 3D mode. They think the VRAM on the graphics card is filling up and not emptying. I have sent Apple support projects, crash logs, screen captures, etc. I have been corresponding with them on this and will post a solution when I get it.
Crash Detials: working in 3D-using multiple video clips- give Motion about 10-30 min-thumbnails and currently selected video clip turn solid orange-prgram crashes within about a minute after that.

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to be

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?

Anything is possible.

Reds in my images turn orange only in Lightroom, PS CS3, and Bridge

Similar Messages

Maybe you are looking for