Reduce data transfer during roaming

Hello
Does anyone have an idea what the settings my be to reduce data roaming on a E72
The device uses up to 1GB a month and no extreme use of applications is made, result is that the device gets hot and uses a lot of battery
thanks for the reactions
Solved!
Go to Solution.

@Mancini2308
Is Psiloc World Traveler enabled and how often are you checking for Email?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • How can i improve speed of my application and reduce data transfer time ?

    Hello,
    My web application is adobe flex application which is build in flash builder 4.0 and use flex 4.0 SDK.
    I am using asp.net web service and cairngorm architecture in my project.
    Front : asp.net c# web project
    Middle : asp.net c# web service
    back : MS Sql server 2005
    When i run my applicaiton then i show that data transfer time between USA server to Indian client is so huge.
    Please suggest me all solutions approach so i am increase the speed of my application and reduce data transfer time.
    And please let me know how all approaches is reduce my data transfer speed.
    Thanks,
    Mohit.

    Hello,
    Thank you for your response,
    If i am using remote object insted of web services, can this will increase my application speed i
    It is big change so please give me guidance.
    My application have different type of request, some are very small request and transfer little amout of data from server to client, some request are send very huge amount of data from server to client .
    I am using JSON from data transfer in my current web service.
    Please provide some guidance on this.
    Thanks,
    Mohit

  • HttpURLConnection : reduce data transfer

    Hi everybody,
    I am using the code below b4 parsing the HTML page.
         try
              URL u=new URL("http://someWebpage.com");
                    HttpURLConnection con=u.openConnection();
                    BufferedReader Buf = new BufferedReader(new InputStreamReader(con.getInputStream));
         }catch(Exception ex)
                    ex.printStackTrace();
            }What happens if I call          Buf.skip(10000); to skip 10000 bytes.
    Does it reduce any data transfer?

    No since it's not specified in the http protocol.I am really confused about ' data on stream' . What
    does it mean?
    The webserver writes data on the stream, but since my
    program will not be reading it, (using skip ()
    method) is the data still downloaded?Yes it is.
    /Kaj

  • Time Capsule only runs with 1,1Mbit up/down during data transfer, internet speed is ok, TC is used to extend an existing network

    Hello Everyone,
    I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
    I've read that:
    The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
    Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
    Thank you for any help in advance and have a nice day,
    Olli

    You have double hop wireless with this setup..
    You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
    Then you can setup the TC wireless to reinforce the fritzy..
    Same wireless name as SSID.
    Same security settings... really should be WPA2 AES or in TC personal.
    Same password..
    Just different wireless channel.
    Then you can use 5ghz on the TC if you are up close and personal.

  • What is the best way to shut down an iMac that has frozen during a data transfer? The disk I was writing to will not eject. Stopping "copy items to" doesn't work either_ it is frozen as well. Is there a way to force eject the disk so I can shut down?

    Some more information on the above: OS: 7.2
    1. None of the shutdown commands would work so I held the power button down and received a prompt that asked if I wished to force eject the drive, I selected
    the force eject and then shut down.
    2. Just recently I installed an eSATA _ Thunderbolt_ port multiplier compliant PCIe card (Seritek Q6G) into a thunderbolt external chassis (OWC Helios) (seritek Q6G).
    This freeze data transfer also happened when I connected a Firmtek 5PM external tower to the iMac via thunderbolt cable.
    The driver for the seritek Q6G was installed in the iMac previous to connection of any of the devices.
    Both external towers mount ok on the iMac but have frozen during data transfer.
    The initial freeze was with the Firmtek 5PM which is (JBOD)_ I thought that might have had something to do with the freeze_ it being JBOD_ so next I tried the Mercury Elite AL Pro Q2- which is formated in RAID 5. But then froze too.
    Anybody have any experience with this?
    Maybe I need another driver?
    Or maybe some update to my OS?
    Any suggestions welcomed.
    Thank you

    Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
    In the end I ended up having to power down the iMac.
    Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
    I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
    PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
    hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • [Solved]Computer slow down and freeze during data transfer syncing

    Hello,
    Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
    As an example, here is a bench of files i transfered during a syncing with Grsync
    It took about 12h to sync 64Gb.
    I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
    I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
    Does anyone know how to fix this?
    Thanks in advance
    Last edited by Neldar (2015-03-04 15:54:29)

    It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

  • HT4796 Frozen mac during data transfer

    My data transfer seems to have froze in the middle of it and I can't figure out how to cancel it on the new mac and start over. This is the first thing I have done on the new computer so I can't log-out or anything. Thanks!

    You shouldn't use Migration Assistant to set up a new Mac. You should use Setup Assistant, which launched automatically the first time you started up. Did that happen?

  • Message 'can only work in client 001 during data transfer

    Hello Experts,
    Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
    Message in CFM2 comes up as
    Function/Q/SAPAPO/CIF_LOC_INBOUND
    Text:        You can only work in client 001
    And not sure why because I have not made any changes to settings.
    Can someone please suggest what might be going wrong and what needs to be done?
    Thanks
    Bhaskar

    Hi Bhaskar,
    I have not worked on EWM, and don't know if CIF connectivity is used differently.
    But let me try to propose a general way forward based on your error message.
    It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
    Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
    Check out the following:
    1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
    Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
    2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
    PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
    Let me know the results of your checks, and if this helps you in finding out the root cause.
    PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
    Thanks - Pawan

  • Data Transfer methods

    Hi all,
    Can anyone please explain me what are synchronous and asychronous data transfer methods?
    Where are the settings to be done in R/3 to get data to BI ?
    Thanks in advance

    Data Transfer
    Definition
    Synchronous Data Transfer
    Data is transferred directly (simultaneously, synchronously) from program to program via CPI-C communication.
    Both communications partners must be available at the same time. Because the central SAP system in a typical SAP installation does not run round the clock, but the linked systems are frequently in operation 24 hours a day, asynchronous data transfer is necessary.
    Synchronous data transfer has the following disadvantages:
    Transfer is not possible is the partner system or the line is not available.
    A data backlog in the reciever system causes a data backlog in the sender system. Processing in the application is delayed.
    If a connection is broken, it may be necessary to perform a recovery in both systems.
    Asynchronous Data Transfer
    With asynchronous, or buffered, data transfer, data is temporarily stored in a sequential queue.
    Asynchronous transfer has the following advantages:
    Wait times in the sender system are avoided.
    A recovery is automatically performed in the sender system.
    Transfer need not be performed during online time. This avoids placing unnecessary load on the system and thus helps to reduce costs.
    The Queue Application Programming Interface (Q-API) is an SAP interface for asynchronous data transfer.
    Data is buffered sequentially and processed immediately or later by an asynchronously running process.
    One possible processing method is to send data to an external partner system via CPI-C. Data units that belong together can be stored in accordance with transaction and sent to a communications partner.
    Data is buffered in queues before it is transferred to the target system.
    In an R/3 System, the queues are stored in a relational database. All R/3 database systems are supported.

  • Hi Data transfer methods for ABAP Dataflow

    HI
       Good Day !!!!
                        Can any one Explain about What are Data tansfer mothods in ABAP Dataflow Explain Each one  which is the best one can you explain with example .
    Regards
    Chandu

    Data Transfer
    Definition
    Synchronous Data Transfer
    Data is transferred directly (simultaneously, synchronously) from program to program via CPI-C communication.
    Both communications partners must be available at the same time. Because the central SAP system in a typical SAP installation does not run round the clock, but the linked systems are frequently in operation 24 hours a day, asynchronous data transfer is necessary.
    Synchronous data transfer has the following disadvantages:
    Transfer is not possible is the partner system or the line is not available.
    A data backlog in the reciever system causes a data backlog in the sender system. Processing in the application is delayed.
    If a connection is broken, it may be necessary to perform a recovery in both systems.
    Asynchronous Data Transfer
    With asynchronous, or buffered, data transfer, data is temporarily stored in a sequential queue.
    Asynchronous transfer has the following advantages:
    Wait times in the sender system are avoided.
    A recovery is automatically performed in the sender system.
    Transfer need not be performed during online time. This avoids placing unnecessary load on the system and thus helps to reduce costs.
    The Queue Application Programming Interface (Q-API) is an SAP interface for asynchronous data transfer.
    Data is buffered sequentially and processed immediately or later by an asynchronously running process.
    One possible processing method is to send data to an external partner system via CPI-C. Data units that belong together can be stored in accordance with transaction and sent to a communications partner.
    Data is buffered in queues before it is transferred to the target system.
    In an R/3 System, the queues are stored in a relational database. All R/3 database systems are supported.

  • Question: New Hard Drive and Data Transfer Kit Device

    Yep, I go another HDD this time for my lil Compaq Persario 700 series notebook OS Win XP. I bought a DriveWire Univeral Adapter & Data Transfer Kit. I want to know if there would be any issue transferring my iTunes Library to my new HDD? I do have some music apart of my iTunes Library that's DRM protected. Should still deactivate my account during the transfer . . . that is, if it's possible. Thank you for any assistance your can give me. Itunes 10 by the way.

    From what you posted, you should be able to set the itunes media folder location to the exHD and then run the ituens consolidate library command.
    That will put your itunes library content onto the exHD.
    Here's Apple's article on that
    http://support.apple.com/kb/ht1364
    Pay attention to this note from it
    +Note: If you move your library to an external drive, you'll need to power up and connect the drive before starting iTunes. If you don't, iTunes will prompt you to either locate the library or to create a new library (which will result in an empty library). No matter what, it's always a good idea to have a backup of the media you have in iTunes.+
    That means you MUST have the exHD connected BEFORe starting itunes. WHat it doesn't mention is, it always needs to have the same drive letter. WIndows can change USB port drive letter without telling you it's doing it. Best practice, is to assign a permanent drive letter such as m: for Media. You can assign drive letters using windows disk manager.
    There's no need to deactivate any account during this procedure - why do you think you should?

  • Possible network issues preventing successful application data transfer?

    Hello all.
    We are having a few issues with a specific set up here at work involving Oracle 11, and Oracle 9 databases and I was hoping someone with a fair idea of how Oracle configurations work when it comes to network connectivity and data transfer would mind sharing their opinion on the matter.
    First off, a bit of background. I'm a network security engineer by trade and my experience when it comes to the application side of things, specifically databases is inherently weak; so I apologise if my terminology or logic is slightly off here.
    Basically what I'm trying to determine is where a fault lies between our users using a terminal server and a remote Oracle SQL database that should service their requests.
    The problem lies wherein the user will utilise the 'sqlplus' application invoked from a Windows command prompt window, and expect to be able login and query a database. I believe we have two versions available to use, version 9 which is not actually in production but able to be used for testing and version 11 which is active in production.
    When accessing Oracle 11 servers will hang where we expect to see a successful connection followed by a healthy looking "SQL>" prompt data transfer appears to stall as follows:
    C:\>sqlplus username/[email protected]
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:12:17 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    *hangs here*If we try on the Oracle 9 setup things look fine initially:
    C:\>sqlplus username/[email protected]
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 22 18:19:20 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.6.0 - ProductionHowever once connected to the Oracle 9 box; if we run a query similar to:
    sqlplus username/[email protected]
    select * from <database> where rownum < 10;This will again hang.
    That said however, if we try and run a query similar to:
    sqlplus username/[email protected]
    select * from <database> where rownum < 5;This will return 4 rows of usable data, without issue.
    Our systems engineer provided me with a SQLNET trace from the server side and believes he's identified where it occurs:
    [21-SEP-2010 16:06:42:989] nsdo: entry
    [21-SEP-2010 16:06:42:989] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
    [21-SEP-2010 16:06:42:989] nsdo: rank=64, nsctxrnk=0
    [21-SEP-2010 16:06:42:990] nsdo: nsctx: state=8, flg=0x420c, mvd=0
    [21-SEP-2010 16:06:42:990] nsdo: gtn=156, gtc=156, ptn=10, ptc=2011
    [21-SEP-2010 16:06:42:990] nsdo: switching to application buffer
    [21-SEP-2010 16:06:42:990] nsrdr: entry
    [21-SEP-2010 16:06:42:990] nsrdr: recving a packet
    [21-SEP-2010 16:06:42:990] nsprecv: entry
    [21-SEP-2010 16:06:42:990] nsprecv: reading from transport...
    [21-SEP-2010 16:06:42:990] nttrd: entry
    #    HANG OCCURS HERE
    [21-SEP-2010 16:10:13:347] ntt2err: entry
    [21-SEP-2010 16:10:13:347] ntt2err: soc 25 error - operation=5, ntresnt[0]=517, ntresnt[1]=131, ntresnt[2]=0
    [21-SEP-2010 16:10:13:347] ntt2err: exit
    [21-SEP-2010 16:10:13:347] nttrd: exit
    [21-SEP-2010 16:10:13:347] nsprecv: transport read error
    [21-SEP-2010 16:10:13:347] nsprecv: error exit
    [21-SEP-2010 16:10:13:347] nserror: entry
    [21-SEP-2010 16:10:13:347] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=131, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [21-SEP-2010 16:10:13:348] nsrdr: error exit
    [21-SEP-2010 16:10:13:348] nsdo: nsctxrnk=0
    [21-SEP-2010 16:10:13:348] nsdo: error exit
    [21-SEP-2010 16:10:13:348] nioqrc:  wanted 1 got 0, type 0
    [21-SEP-2010 16:10:13:348] nioqper:  error from nioqrc
    [21-SEP-2010 16:10:13:348] nioqper:    nr err code: 0
    [21-SEP-2010 16:10:13:348] nioqper:    ns main err code: 12547
    [21-SEP-2010 16:10:13:348] nioqper:    ns (2)  err code: 12560
    [21-SEP-2010 16:10:13:348] nioqper:    nt main err code: 517
    [21-SEP-2010 16:10:13:348] nioqper:    nt (2)  err code: 131
    [21-SEP-2010 16:10:13:349] nioqper:    nt OS   err code: 0
    [21-SEP-2010 16:10:13:349] nioqer: entry
    [21-SEP-2010 16:10:13:349] nioqer:  incoming err = 12151
    [21-SEP-2010 16:10:13:349] nioqce: entry
    [21-SEP-2010 16:10:13:349] nioqce: exit
    [21-SEP-2010 16:10:13:349] nioqer:  returning err = 3113
    [21-SEP-2010 16:10:13:349] nioqer: exit
    [21-SEP-2010 16:10:13:349] nioqrc: exit
    [21-SEP-2010 16:10:13:349] nioqds: entry
    [21-SEP-2010 16:10:13:349] nioqds:  disconnecting...
    [21-SEP-2010 16:10:13:349] nsdo: entry
    [21-SEP-2010 16:10:13:349] nsdo: cid=0, opcode=67, *bl=0, *what=1, uflgs=0x2, cflgs=0x3
    [21-SEP-2010 16:10:13:350] nsdo: rank=64, nsctxrnk=0
    [21-SEP-2010 16:10:13:350] nsdo: nsctx: state=1, flg=0x420c, mvd=0
    [21-SEP-2010 16:10:13:350] nsdo: nsctxrnk=0
    [21-SEP-2010 16:10:13:350] nsdo: error exitFrom the client log side, it looks like this:
    [21-SEP-2010 16:06:42:886] nsdo: entry
    [21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
    [21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
    [21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
    [21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
    [21-SEP-2010 16:06:42:886] nsdofls: entry
    [21-SEP-2010 16:06:42:886] nsdofls: DATA flags: 0x0
    [21-SEP-2010 16:06:42:886] nsdofls: sending NSPTDA packet
    [21-SEP-2010 16:06:42:886] nspsend: entry
    [21-SEP-2010 16:06:42:886] nspsend: plen=17, type=6
    [21-SEP-2010 16:06:42:886] nttwr: entry
    [21-SEP-2010 16:06:42:886] nttwr: socket 1724 had bytes written=17
    [21-SEP-2010 16:06:42:886] nttwr: exit
    [21-SEP-2010 16:06:42:886] nspsend: packet dump
    [21-SEP-2010 16:06:42:886] nspsend: 00 11 00 00 06 00 00 00  |........|
    [21-SEP-2010 16:06:42:886] nspsend: 00 00 03 05 1C 01 01 01  |........|
    [21-SEP-2010 16:06:42:886] nspsend: 0F                       |.       |
    [21-SEP-2010 16:06:42:886] nspsend: 17 bytes to transport
    [21-SEP-2010 16:06:42:886] nspsend: normal exit
    [21-SEP-2010 16:06:42:886] nsdofls: exit (0)
    [21-SEP-2010 16:06:42:886] nsdo: nsctxrnk=0
    [21-SEP-2010 16:06:42:886] nsdo: normal exit
    [21-SEP-2010 16:06:42:886] nsdo: entry
    [21-SEP-2010 16:06:42:886] nsdo: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x3
    [21-SEP-2010 16:06:42:886] nsdo: rank=64, nsctxrnk=0
    [21-SEP-2010 16:06:42:886] nsdo: nsctx: state=8, flg=0x400d, mvd=0
    [21-SEP-2010 16:06:42:886] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
    [21-SEP-2010 16:06:42:886] nsdo: switching to application buffer
    [21-SEP-2010 16:06:42:886] nsrdr: entry
    [21-SEP-2010 16:06:42:886] nsrdr: recving a packet
    [21-SEP-2010 16:06:42:886] nsprecv: entry
    [21-SEP-2010 16:06:42:886] nsprecv: reading from transport...
    [21-SEP-2010 16:06:42:886] nttrd: entry
    #    HANG OCCURS HERE
    #    Need to <CTRL C> twice to kill
    #I've tried searching the net for similar occurrences of some of the interesting looking trace data but there appears to be limited information available, none of which is terribly helpful.
    What I'm really after is either someone who has had this issue before, or someone who can better interpret the error output from the trace files and perhaps give me an idea of what's causing it to occur. Specifically whether that error text above relates to a failed connection on the underlying network connectivity side of things or whether it may be something on a higher level within the application layers. We have done packet dumps on firewalls to check the traffic as it traverses the firewall but there are no anomalies that I can see which may be contributing to the issue at hand.
    I have organised for some testing to occur within the next 24 hours as there is a Cisco ASA Firewall that sits in the network path that is performing inspection on packets travelling through it. The inspection for SQLNET specifically is disabled, but we intend to enable this once more for testing to see whether it makes a difference. I'm not entirely confident it will however, and until we do get a chance to test any constructive input or alternate ideas will be greatly appreciated. I'm trying to cover as many bases as possible here.
    Cheers,
    Josh.

    So some further testing doesn't show anything interesting. But that said here's a look at a TCP Dump for the Oracle 11 session that hangs:
    SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
    tcpdump: WARNING: bond0: no IPv4 address assigned
    tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
    21:55:43.781596 IP (tos 0x0, ttl 126, id 24439, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.62008 > 172.x.x.x.1521: S, cksum 0x4d0a (correct), 2416392635:2416392635(0) win 64512 <mss 1380,nop,nop,sackOK>
    21:55:43.782454 IP (tos 0x0, ttl  59, id 50281, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: S, cksum 0xc0ae (correct), 3123579836:3123579836(0) ack 2416392636 win 49680 <mss 1460,nop,nop,sackOK>
    21:55:43.783311 IP (tos 0x0, ttl 126, id 24440, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0xb382 (correct), 1:1(0) ack 1 win 64512
    21:55:43.787142 IP (tos 0x0, ttl 126, id 24441, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 1:245(244) ack 1 win 64512
    21:55:43.788504 IP (tos 0x0, ttl  59, id 50282, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xed72 (correct), 1:1(0) ack 245 win 49436
    21:55:43.859023 IP (tos 0x0, ttl  59, id 50283, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.62008: P, cksum 0xe166 (correct), 1:9(8) ack 245 win 49680
    21:55:43.860392 IP (tos 0x0, ttl 126, id 24445, offset 0, flags [DF], proto: TCP (6), length: 284) 125.x.x.x.62008 > 172.x.x.x.1521: P 245:489(244) ack 9 win 64504
    21:55:43.861773 IP (tos 0x0, ttl  59, id 50284, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xeb82 (correct), 9:9(0) ack 489 win 49680
    21:55:43.861908 IP (tos 0x0, ttl  59, id 50285, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.62008: P 9:41(32) ack 489 win 49680
    21:55:43.865341 IP (tos 0x0, ttl 126, id 24446, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.62008 > 172.x.x.x.1521: P 489:645(156) ack 41 win 64472
    21:55:43.867017 IP (tos 0x0, ttl  59, id 50286, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.62008: P 41:168(127) ack 645 win 49680
    21:55:43.874836 IP (tos 0x0, ttl 126, id 24447, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.62008 > 172.x.x.x.1521: P 645:682(37) ack 168 win 64345
    21:55:43.876405 IP (tos 0x0, ttl  59, id 50287, offset 0, flags [DF], proto: TCP (6), length: 226) 172.x.x.x.1521 > 125.x.x.x.62008: P 168:354(186) ack 682 win 49680
    21:55:43.995921 IP (tos 0x0, ttl 126, id 24451, offset 0, flags [DF], proto: TCP (6), length: 1420) 125.x.x.x.62008 > 172.x.x.x.1521: . 682:2062(1380) ack 354 win 64159
    21:55:43.995978 IP (tos 0x0, ttl 126, id 24452, offset 0, flags [DF], proto: TCP (6), length: 671) 125.x.x.x.62008 > 172.x.x.x.1521: P 2062:2693(631) ack 354 win 64159
    21:55:43.999910 IP (tos 0x0, ttl  59, id 50288, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xe18d (correct), 354:354(0) ack 2693 win 49680
    21:55:44.015402 IP (tos 0x0, ttl 126, id 24455, offset 0, flags [DF], proto: TCP (6), length: 326) 125.x.x.x.62008 > 172.x.x.x.1521: P 2693:2979(286) ack 354 win 64159
    21:55:44.020491 IP (tos 0x0, ttl  59, id 50289, offset 0, flags [DF], proto: TCP (6), length: 1420) 172.x.x.x.1521 > 125.x.x.x.62008: . 354:1734(1380) ack 2979 win 49680
    21:55:44.020789 IP (tos 0x0, ttl  59, id 50290, offset 0, flags [DF], proto: TCP (6), length: 671) 172.x.x.x.1521 > 125.x.x.x.62008: P 1734:2365(631) ack 2979 win 49680
    21:55:44.021015 IP (tos 0x0, ttl  59, id 50291, offset 0, flags [DF], proto: TCP (6), length: 355) 172.x.x.x.1521 > 125.x.x.x.62008: P 2365:2680(315) ack 2979 win 49680
    21:55:44.022489 IP (tos 0x0, ttl 126, id 24457, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: ., cksum 0x9ea4 (correct), 2979:2979(0) ack 2365 win 64512
    21:55:44.148236 IP (tos 0x0, ttl 126, id 24461, offset 0, flags [DF], proto: TCP (6), length: 215) 125.x.x.x.62008 > 172.x.x.x.1521: P 2979:3154(175) ack 2680 win 64197
    21:55:44.152125 IP (tos 0x0, ttl  59, id 50292, offset 0, flags [DF], proto: TCP (6), length: 187) 172.x.x.x.1521 > 125.x.x.x.62008: P 2680:2827(147) ack 3154 win 49680
    21:55:44.174040 IP (tos 0x0, ttl 126, id 24462, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
    21:55:44.732635 IP (tos 0x0, ttl 126, id 24482, offset 0, flags [DF], proto: TCP (6), length: 1054) 125.x.x.x.62008 > 172.x.x.x.1521: P 3154:4168(1014) ack 2827 win 64050
    21:55:44.735346 IP (tos 0x0, ttl  59, id 50294, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.62008: ., cksum 0xcefc (correct), 3632:3632(0) ack 4168 win 49680
    21:56:17.076742 IP (tos 0x0, ttl 126, id 25631, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.62008 > 172.x.x.x.1521: R, cksum 0x942e (correct), 4168:4168(0) ack 2827 win 0
    *SQL session hangs here*The 'RESET' occurs when I kill the client using CTRL+C after a long period of inactivity, not during the session itself.
    And then.. Here's a successful login and query of 7 rows on the Oracle 9 database from a network perspective:
    SNORT01:~ # tcpdump -nni bond0 -vvv vlan and host 125.x.x.x and host 172.x.x.x -c 10000
    tcpdump: WARNING: bond0: no IPv4 address assigned
    tcpdump: listening on bond0, link-type EN10MB (Ethernet), capture size 68 bytes
    21:53:27.598450 IP (tos 0x0, ttl 126, id 19396, offset 0, flags [DF], proto: TCP (6), length: 48) 125.x.x.x.61937 > 172.x.x.x.1521: S, cksum 0xc9b4 (correct), 2519356327:2519356327(0) win 64512 <mss 1380,nop,nop,sackOK>
    21:53:27.612189 IP (tos 0x0, ttl  53, id 46015, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: S, cksum 0x1cdb (correct), 1010936359:1010936359(0) ack 2519356328 win 49680 <mss 1460,nop,nop,sackOK>
    21:53:27.612905 IP (tos 0x0, ttl 126, id 19398, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0x0faf (correct), 1:1(0) ack 1 win 64512
    21:53:27.616233 IP (tos 0x0, ttl 126, id 19399, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 1:282(281) ack 1 win 64512
    21:53:27.629987 IP (tos 0x0, ttl  53, id 46016, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4886 (correct), 1:1(0) ack 282 win 49680
    21:53:27.692135 IP (tos 0x0, ttl  53, id 46017, offset 0, flags [DF], proto: TCP (6), length: 48) 172.x.x.x.1521 > 125.x.x.x.61937: P, cksum 0x3d6e (correct), 1:9(8) ack 282 win 49680
    21:53:27.693603 IP (tos 0x0, ttl 126, id 19402, offset 0, flags [DF], proto: TCP (6), length: 321) 125.x.x.x.61937 > 172.x.x.x.1521: P 282:563(281) ack 9 win 64504
    21:53:27.707460 IP (tos 0x0, ttl  53, id 46018, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x4765 (correct), 9:9(0) ack 563 win 49680
    21:53:27.707883 IP (tos 0x0, ttl  53, id 46019, offset 0, flags [DF], proto: TCP (6), length: 72) 172.x.x.x.1521 > 125.x.x.x.61937: P 9:41(32) ack 563 win 49680
    21:53:27.711950 IP (tos 0x0, ttl 126, id 19403, offset 0, flags [DF], proto: TCP (6), length: 196) 125.x.x.x.61937 > 172.x.x.x.1521: P 563:719(156) ack 41 win 64472
    21:53:27.725971 IP (tos 0x0, ttl  53, id 46020, offset 0, flags [DF], proto: TCP (6), length: 167) 172.x.x.x.1521 > 125.x.x.x.61937: P 41:168(127) ack 719 win 49680
    21:53:27.734468 IP (tos 0x0, ttl 126, id 19405, offset 0, flags [DF], proto: TCP (6), length: 77) 125.x.x.x.61937 > 172.x.x.x.1521: P 719:756(37) ack 168 win 64345
    21:53:27.748270 IP (tos 0x0, ttl  53, id 46021, offset 0, flags [DF], proto: TCP (6), length: 199) 172.x.x.x.1521 > 125.x.x.x.61937: P 168:327(159) ack 756 win 49680
    21:53:27.878720 IP (tos 0x0, ttl 126, id 19409, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
    21:53:28.994991 IP (tos 0x0, ttl 126, id 19443, offset 0, flags [DF], proto: TCP (6), length: 1110) 125.x.x.x.61937 > 172.x.x.x.1521: P 756:1826(1070) ack 327 win 64186
    21:53:29.010680 IP (tos 0x0, ttl  53, id 46023, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3d83 (correct), 1276:1276(0) ack 1826 win 49680
    21:53:32.561849 IP (tos 0x0, ttl  53, id 46024, offset 0, flags [DF], proto: TCP (6), length: 989) 172.x.x.x.1521 > 125.x.x.x.61937: P 327:1276(949) ack 1826 win 49680
    21:53:32.710661 IP (tos 0x0, ttl 126, id 19550, offset 0, flags [DF], proto: TCP (6), length: 223) 125.x.x.x.61937 > 172.x.x.x.1521: P 1826:2009(183) ack 1276 win 63237
    21:53:32.724384 IP (tos 0x0, ttl  53, id 46025, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x3ccc (correct), 1276:1276(0) ack 2009 win 49680
    21:53:32.732636 IP (tos 0x0, ttl  53, id 46026, offset 0, flags [DF], proto: TCP (6), length: 133) 172.x.x.x.1521 > 125.x.x.x.61937: P 1276:1369(93) ack 2009 win 49680
    21:53:32.739922 IP (tos 0x0, ttl 126, id 19553, offset 0, flags [DF], proto: TCP (6), length: 947) 125.x.x.x.61937 > 172.x.x.x.1521: P 2009:2916(907) ack 1369 win 63144
    21:53:32.763266 IP (tos 0x0, ttl  53, id 46027, offset 0, flags [DF], proto: TCP (6), length: 329) 172.x.x.x.1521 > 125.x.x.x.61937: P 1369:1658(289) ack 2916 win 49680
    21:53:32.770925 IP (tos 0x0, ttl 126, id 19555, offset 0, flags [DF], proto: TCP (6), length: 78) 125.x.x.x.61937 > 172.x.x.x.1521: P 2916:2954(38) ack 1658 win 64512
    21:53:32.784774 IP (tos 0x0, ttl  53, id 46028, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 1658:1836(178) ack 2954 win 49680
    21:53:32.787455 IP (tos 0x0, ttl 126, id 19556, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
    21:53:33.478760 IP (tos 0x0, ttl 126, id 19578, offset 0, flags [DF], proto: TCP (6), length: 149) 125.x.x.x.61937 > 172.x.x.x.1521: P 2954:3063(109) ack 1836 win 64334
    21:53:33.492256 IP (tos 0x0, ttl  53, id 46030, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34ce (correct), 2268:2268(0) ack 3063 win 49680
    21:53:36.820908 IP (tos 0x0, ttl  53, id 46031, offset 0, flags [DF], proto: TCP (6), length: 472) 172.x.x.x.1521 > 125.x.x.x.61937: P 1836:2268(432) ack 3063 win 49680
    21:53:36.824225 IP (tos 0x0, ttl 126, id 19733, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 3063:3080(17) ack 2268 win 63902
    21:53:36.837345 IP (tos 0x0, ttl  53, id 46032, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x34bd (correct), 2268:2268(0) ack 3080 win 49680
    21:53:36.838015 IP (tos 0x0, ttl  53, id 46033, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 2268:2338(70) ack 3080 win 49680
    21:53:36.839520 IP (tos 0x0, ttl 126, id 19734, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3080:3119(39) ack 2338 win 63832
    21:53:36.853507 IP (tos 0x0, ttl  53, id 46034, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2338:2516(178) ack 3119 win 49680
    21:53:36.855886 IP (tos 0x0, ttl 126, id 19735, offset 0, flags [DF], proto: TCP (6), length: 160) 125.x.x.x.61937 > 172.x.x.x.1521: P 3119:3239(120) ack 2516 win 63654
    21:53:36.870292 IP (tos 0x0, ttl  53, id 46035, offset 0, flags [DF], proto: TCP (6), length: 99) 172.x.x.x.1521 > 125.x.x.x.61937: P 2516:2575(59) ack 3239 win 49680
    21:53:36.879557 IP (tos 0x0, ttl 126, id 19738, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3239:3278(39) ack 2575 win 63595
    21:53:36.893506 IP (tos 0x0, ttl  53, id 46036, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 2575:2753(178) ack 3278 win 49680
    21:53:36.895884 IP (tos 0x0, ttl 126, id 19739, offset 0, flags [DF], proto: TCP (6), length: 292) 125.x.x.x.61937 > 172.x.x.x.1521: P 3278:3530(252) ack 2753 win 63417
    21:53:36.911464 IP (tos 0x0, ttl  53, id 46037, offset 0, flags [DF], proto: TCP (6), length: 305) 172.x.x.x.1521 > 125.x.x.x.61937: P 2753:3018(265) ack 3530 win 49680
    21:53:36.913580 IP (tos 0x0, ttl 126, id 19740, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3530:3569(39) ack 3018 win 63152
    21:53:36.927515 IP (tos 0x0, ttl  53, id 46038, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3018:3196(178) ack 3569 win 49680
    21:53:36.938328 IP (tos 0x0, ttl 126, id 19742, offset 0, flags [DF], proto: TCP (6), length: 315) 125.x.x.x.61937 > 172.x.x.x.1521: P 3569:3844(275) ack 3196 win 64512
    21:53:36.953008 IP (tos 0x0, ttl  53, id 46039, offset 0, flags [DF], proto: TCP (6), length: 183) 172.x.x.x.1521 > 125.x.x.x.61937: P 3196:3339(143) ack 3844 win 49680
    21:53:36.961020 IP (tos 0x0, ttl 126, id 19743, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 3844:3883(39) ack 3339 win 64369
    21:53:36.974890 IP (tos 0x0, ttl  53, id 46040, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3339:3517(178) ack 3883 win 49680
    21:53:36.977183 IP (tos 0x0, ttl 126, id 19744, offset 0, flags [DF], proto: TCP (6), length: 208) 125.x.x.x.61937 > 172.x.x.x.1521: P 3883:4051(168) ack 3517 win 64191
    21:53:36.991461 IP (tos 0x0, ttl  53, id 46041, offset 0, flags [DF], proto: TCP (6), length: 110) 172.x.x.x.1521 > 125.x.x.x.61937: P 3517:3587(70) ack 4051 win 49680
    21:53:36.993439 IP (tos 0x0, ttl 126, id 19747, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4051:4090(39) ack 3587 win 64121
    21:53:37.007199 IP (tos 0x0, ttl  53, id 46042, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3587:3765(178) ack 4090 win 49680
    21:53:37.011239 IP (tos 0x0, ttl 126, id 19748, offset 0, flags [DF], proto: TCP (6), length: 183) 125.x.x.x.61937 > 172.x.x.x.1521: P 4090:4233(143) ack 3765 win 63943
    21:53:37.025767 IP (tos 0x0, ttl  53, id 46043, offset 0, flags [DF], proto: TCP (6), length: 210) 172.x.x.x.1521 > 125.x.x.x.61937: P 3765:3935(170) ack 4233 win 49680
    21:53:37.027455 IP (tos 0x0, ttl 126, id 19750, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4233:4272(39) ack 3935 win 63773
    21:53:37.041382 IP (tos 0x0, ttl  53, id 46044, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 3935:4113(178) ack 4272 win 49680
    21:53:37.044708 IP (tos 0x0, ttl 126, id 19751, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4272:4307(35) ack 4113 win 63595
    21:53:37.058388 IP (tos 0x0, ttl  53, id 46045, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4113:4129(16) ack 4307 win 49680
    21:53:37.060398 IP (tos 0x0, ttl 126, id 19752, offset 0, flags [DF], proto: TCP (6), length: 75) 125.x.x.x.61937 > 172.x.x.x.1521: P 4307:4342(35) ack 4129 win 63579
    21:53:37.073926 IP (tos 0x0, ttl  53, id 46046, offset 0, flags [DF], proto: TCP (6), length: 56) 172.x.x.x.1521 > 125.x.x.x.61937: P 4129:4145(16) ack 4342 win 49680
    21:53:37.088056 IP (tos 0x0, ttl 126, id 19753, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xf23e (correct), 4342:4342(0) ack 4145 win 63563
    21:53:56.309909 IP (tos 0x0, ttl 126, id 20509, offset 0, flags [DF], proto: TCP (6), length: 176) 125.x.x.x.61937 > 172.x.x.x.1521: P 4342:4478(136) ack 4145 win 63563
    21:53:56.325783 IP (tos 0x0, ttl  53, id 46047, offset 0, flags [DF], proto: TCP (6), length: 398) 172.x.x.x.1521 > 125.x.x.x.61937: P 4145:4503(358) ack 4478 win 49680
    21:53:56.329152 IP (tos 0x0, ttl 126, id 20511, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
    21:53:56.557234 IP (tos 0x0, ttl 126, id 20519, offset 0, flags [DF], proto: TCP (6), length: 57) 125.x.x.x.61937 > 172.x.x.x.1521: P 4478:4495(17) ack 4503 win 63205
    21:53:56.570496 IP (tos 0x0, ttl  53, id 46049, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24ea (correct), 4904:4904(0) ack 4495 win 49680
    21:53:58.561449 IP (tos 0x0, ttl  53, id 46051, offset 0, flags [DF], proto: TCP (6), length: 441) 172.x.x.x.1521 > 125.x.x.x.61937: P 4503:4904(401) ack 4495 win 49680
    21:53:58.602228 IP (tos 0x0, ttl 126, id 20579, offset 0, flags [DF], proto: TCP (6), length: 79) 125.x.x.x.61937 > 172.x.x.x.1521: P 4495:4534(39) ack 4904 win 64512
    21:53:58.615281 IP (tos 0x0, ttl  53, id 46052, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x24c3 (correct), 4904:4904(0) ack 4534 win 49680
    21:53:58.616571 IP (tos 0x0, ttl  53, id 46053, offset 0, flags [DF], proto: TCP (6), length: 218) 172.x.x.x.1521 > 125.x.x.x.61937: P 4904:5082(178) ack 4534 win 49680
    21:53:58.745531 IP (tos 0x0, ttl 126, id 20584, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xead2 (correct), 4534:4534(0) ack 5082 win 64334
    21:54:01.476582 IP (tos 0x0, ttl 126, id 20707, offset 0, flags [DF], proto: TCP (6), length: 53) 125.x.x.x.61937 > 172.x.x.x.1521: P 4534:4547(13) ack 5082 win 64334
    21:54:01.492998 IP (tos 0x0, ttl  53, id 46054, offset 0, flags [DF], proto: TCP (6), length: 53) 172.x.x.x.1521 > 125.x.x.x.61937: P 5082:5095(13) ack 4547 win 49680
    21:54:01.499924 IP (tos 0x0, ttl 126, id 20709, offset 0, flags [DF], proto: TCP (6), length: 50) 125.x.x.x.61937 > 172.x.x.x.1521: P, cksum 0xe469 (correct), 4547:4557(10) ack 5095 win 64321
    21:54:01.500558 IP (tos 0x0, ttl 126, id 20710, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: F, cksum 0xeaba (correct), 4557:4557(0) ack 5095 win 64321
    21:54:01.513561 IP (tos 0x0, ttl  53, id 46055, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: F, cksum 0x23ec (correct), 5095:5095(0) ack 4557 win 49680
    21:54:01.513628 IP (tos 0x0, ttl  53, id 46056, offset 0, flags [DF], proto: TCP (6), length: 40) 172.x.x.x.1521 > 125.x.x.x.61937: ., cksum 0x23eb (correct), 5096:5096(0) ack 4558 win 49680
    21:54:01.514175 IP (tos 0x0, ttl 126, id 20713, offset 0, flags [DF], proto: TCP (6), length: 40) 125.x.x.x.61937 > 172.x.x.x.1521: ., cksum 0xeab9 (correct), 4558:4558(0) ack 5096 win 64321The above is obviously fine, but it's really quite strange. I can get the Oracle 9 queries to hang if I select over 7 rows (8 being the point at which it dies).
    So I can run
    Sqlplus user/[email protected]
    Select * from <blah> where rownum < 7;Over and over again, as many times as I like without issue.
    But!.. As soon as I run
    Sqlplus user/[email protected]
    Select * from <blah> where rownum < 8;The session will hang, and from a network perspective there are no packets being transferred in either direction. It looks exactly like the Oracle 11 session in that the session is still ESTABLISHED from a client perspective but no data is flowing in either direction..
    Does anyone have any idea why '8' is the magic number that would be causing it to hang? I'm really stuggling to see from a network perspective how this may be occuring, as above the TCPDump looks clean.
    Unfortunately I don't have access do a dump on the client/server itself however, just on the network path. I guess that may be where we need to be looking next.
    Thanks for the ideas so far all, much appreciated.
    Josh.

  • Hard Drive Data Transfer rate setting

    I am looking at upgrading my MacBook hard drive, but the drive I wanted to get is SATA-300, and I want to set the data transfer speed to 150 MB/sec to reduce the power draw of the drive without changing performance much. I know in Windows you can do this in to BIOS settings. Does anyone know how I would do this in Leopard? I assume it would be Terminal commands.

    As far as I know, they were just talking about Laptop drives only. It was a great article with lots of detail.
    I am trying to find the article I read on setting BIOS, but pages that carry the info on Laptop power consumption that I was reading were...
    http://www.tomshardware.com/2008/02/18/wdand_toshiba_join_theclub/page2.html
    http://www.tomshardware.com/2008/01/24/hdd_galore/page4.html
    http://www.tomshardware.co.uk/Notebook-harddrive,review-2376-3.html

  • Significant slowness in data transfer from source DB to target DB

    Hi DB Wizards,
         My customer is noticing significant slowness in Data copy from the Source DB to the Target DB. The copy process itself is using PL/SQL code along with cursors. The process is to copy across about 7M records from the source DB to the target DB as part of a complicated Data Migration process (this will be a onetime Go-Live process). I have also attached the AWR reports generated during the Data Migration process. Are there any recommendations to help improve the performance of the Data transfer process.
    Thanks in advance,
    Nitin

    multiple COMMIT will take longer to complete the task than a single COMMIT at the end!Lets check how much longer it is:
    create table T1 as
    select OWNER,TABLE_NAME,COLUMN_NAME,DATA_TYPE,DATA_TYPE_MOD,DATA_TYPE_OWNER,DATA_LENGTH,DATA_PRECISION,DATA_SCALE,NULLABLE,COLUMN_ID,DEFAULT_LENGTH,NUM_DISTINCT,LOW_VALUE,HIGH_VALUE,DENSITY,NUM_NULLS,NUM_BUCKETS,LAST_ANALYZED,SAMPLE_SIZE,CHARACTER_SET_NAME,CHAR_COL_DECL_LENGTH,GLOBAL_STATS,USER_STATS,AVG_COL_LEN,CHAR_LENGTH,CHAR_USED,V80_FMT_IMAGE,DATA_UPGRADED,HISTOGRAM
    from DBA_TAB_COLUMNS;
    insert /*+APPEND*/ into T1 select *from T1;
    commit;
    -- repeat untill it is >7Mln rows
    select count(*) from T1;
    9233824
    create table T2 as select * from T1;
    set autotrace on timing on;
    truncate table t2;
    declare r number:=0;
    begin
    for t in (select * from t1) loop
    insert into t2 values ( t.OWNER,t.TABLE_NAME,t.COLUMN_NAME,t.DATA_TYPE,t.DATA_TYPE_MOD,t.DATA_TYPE_OWNER,t.DATA_LENGTH,t.DATA_PRECISION,t.DATA_SCALE,t.NULLABLE,t.COLUMN_ID,t.DEFAULT_LENGTH,t.NUM_DISTINCT,t.LOW_VALUE,t.HIGH_VALUE,t.DENSITY,t.NUM_NULLS,t.NUM_BUCKETS,t.LAST_ANALYZED,t.SAMPLE_SIZE,t.CHARACTER_SET_NAME,t.CHAR_COL_DECL_LENGTH,t.GLOBAL_STATS,t.USER_STATS,t.AVG_COL_LEN,t.CHAR_LENGTH,t.CHAR_USED,t.V80_FMT_IMAGE,t.DATA_UPGRADED,t.HISTOGRAM
    r:=r+1;
    if mod(r,10000)=0 then commit; end if;
    end loop;
    commit;
    end;
    --call that couple of times with and without  "if mod(r,10000)=0 then commit; end if;" commented.
    Results:
    One commit
    anonymous block completed
    Elapsed: 00:11:07.683
    Statistics
    18474603 recursive calls
    0 spare statistic 4
    0 ges messages sent
    0 db block gets direct
    0 calls to kcmgrs
    0 PX remote messages recv'd
    0 buffer is pinned count
    1737 buffer is not pinned count
    2 workarea executions - optimal
    0 workarea executions - onepass
    10000 rows commit
    anonymous block completed
    Elapsed: 00:10:54.789
    Statistics
    18475806 recursive calls
    0 spare statistic 4
    0 ges messages sent
    0 db block gets direct
    0 calls to kcmgrs
    0 PX remote messages recv'd
    0 buffer is pinned count
    1033 buffer is not pinned count
    2 workarea executions - optimal
    0 workarea executions - onepass
    one commit
    anonymous block completed
    Elapsed: 00:10:39.139
    Statistics
    18474228 recursive calls
    0 spare statistic 4
    0 ges messages sent
    0 db block gets direct
    0 calls to kcmgrs
    0 PX remote messages recv'd
    0 buffer is pinned count
    1123 buffer is not pinned count
    2 workarea executions - optimal
    0 workarea executions - onepass
    10000 rows commit
    anonymous block completed
    Elapsed: 00:11:46.259
    Statistics
    18475707 recursive calls
    0 spare statistic 4
    0 ges messages sent
    0 db block gets direct
    0 calls to kcmgrs
    0 PX remote messages recv'd
    0 buffer is pinned count
    1000 buffer is not pinned count
    2 workarea executions - optimal
    0 workarea executions - onepass
    What we've got?
    Single commit at the end, avg elapsed: 10:53.4s     
    Commit every 10000 rows (923 times), avg elapsed: 11:20.5s
    Difference:     00:27.1s     3.98%
    Multiple commits is just 4% slower. But it is safer regarding Undo consumed.

Maybe you are looking for

  • How to Navigate to a New window

    Hello am new to obiee can anyone please tell me how to navigate to a new window if i click on a report column. There is no Dill in place option set to it.

  • Opening downloaded .doc files

    I cannot set the default for downloaded .doc files to MS Word. Help

  • How do I accept faxes?

    I have just purchased a max mini 2.66GHz : Dual 500GB. My old mac mini was my primary fax machine. I used an Apple USB modem. The same modem does not work on the new system. It may be that Apple has dropped support for their usb modem. How do I accep

  • How can i do that

    How to merge them in one query?? select a.oi_id,to_char(oi_date,'dd-mm-yy HH24:MI:SS'),oi,a.subject from oi a where co_id=21; select count(reply_id) from oi_reply where oi_id=?; select to_char(reply_date,'dd-mm-yy HH24:MI:SS') from oi_reply where rec

  • Change printing format from landscape to protraite

    user is trying to print billing Document How to change printing format from landscape to protraite from SAP level Thanks in advacne.