Reduce Form size for display on Mobile device

Hi all ,
I am currently working on messaging application in mobile device.My project is 90% completed. When I imported my application into 6680 series mobile device.It works fine.Actually i have loginscreen Form before opening the messaging window.In that loginscreen form i have used Username textbox,password textbox,login button,and some other components like remeber id ,autologin etc.But while displaying,only username textbox and password textbox itself displayed on the current display.remaining are all seen by scrolling down.Actually i want all my components to be displayed on the current display without scrolling.So can anyone tell me your idea for my issue as soon as possible.If it is posssible to reduce the form size means please tell the way to reduce it.
Very urgent!!!!!
Thanks / Sourab.

There are two ways...
Either go for a device with a screen size large enough to fit entire form in the visible screen...
Or, ask the device vender to reduce the form size for u in their implementation.
Any one with a better answer ??????
Regds,
SD
Message was edited by:
find_suvro@SDN

Similar Messages

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios?

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios? I have all the apps in Creative Cloud by the way.

If you already purchased it with the same Apple ID, then you will not be re-charged.

Need driver for display (ATI Mobility Radeon 7000 IGP)

Necessary driver for display ATI MOBILITY RADEON 7000 IGP under operating system Win 98, ME

Hi
Like Joao said try to find necessary drivers on Toshiba download site. All drivers are designed for each notebook model and if you use a driver downloaded from graphic card producer site there is no guarantee that it will work properly.
Good luck!

My ipad3 can't reduce photo size for email.

My ipad3 can't reduce photo size for email.

Here's two apps you can use or get Apple's iPhoto for the new iPad.
Simple Resize http://itunes.apple.com/us/app/simple-resize/id327776379?mt=8
Photogene http://itunes.apple.com/us/app/photogene-for-ipad/id363448251?mt=8
 Cheers, Tom

[svn] 3672: Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case .

Revision: 3672
Author: [email protected]
Date: 2008-10-15 16:54:51 -0700 (Wed, 15 Oct 2008)
Log Message:
Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case.
Reviewer: Gordon
QE: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/TextGraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/NameUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/ObjectUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/OrderedObject.as

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Sharepoint Workflow - change URL Path for inside and mobile device email access

I have a workflow that work perfect when accessing from a desktop. An email is sent with a link to the item,
[%Workflow Context:Current Item URL%]. The real address is http://sql/layouts/.......
When the user tries to click on the link in the email from a mobile device, it doesn't work.
If I change the mobile device to http://50.xx.xxx.xxx/layouts... it works fine! (50.xx.xxx.xxx is the port open on our firewall to access SharePoint)
How can I add a separate link in my workflow email so that users can access the SharePoint task list item from a mobile device?
I was thinking of having a link for the inside, http://sql... and a link for the mobile device, http://50.xxx.xxx.xxx/...
Thank you!

List item URLs are basically a URL to the list item using the item Id. In this case 159 is the item id. The URL represents a downloadable resource like a file in a document library. However in a document library you would get the name of the file plus
it's extension. For example Contract.pdf. The .000 represents the file extension for the list item URL. If you typed in your URL in the browser to servername/list name/159_.000 you would be prompted to save the file (list item). You can save it to your local
file system and it will be a file called 159_.000. However the file will be empty since a list item does not contain any binary content. You will have to some how modify the workflow to replace the servername/list name/159._000 to use servername/lists/list
name/dispform.aspx?id=159. This URL will display the view form for the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

PDF files don't display on mobile devices after a GWIA upgra

Hi everybody,
After the upgraded to version 2014, the GWIA was very problematic that the Novell Engineer decided to delete the GWIA object and recreate it. The problem was that I forgot and he forgot to take screen shoots of the GWIA configuration pages before deleting the object. Now all the emails forwarded by using the rule set as "Forward as an attachment to:" action come in as MIME format attachments files just like they did before the upgrade but now the attached pdf, doc. etc files got remove/destroy before they get on the iPhones and other mobile devices. In addition, the emails dont display the original sender email address on the From: field. The same emails open fine in the workstations. I got the impression that the Novell Engineer who deleted/recreated my GWIA object does not even want to deal with this issue. I opened a service ticket with Novell tech support; I was put in the GW queue for close to 3 hours and nobody seemed to be interested in taking my case. The system keeps transferring my case to the CSR queue. Any ideas how to fix this issue?
Thank you.

Hi,
Firstly, please give us your SR number - thank you
Secondly, are your mobile devices accessing e-mail via WebAccess, GroupWise Mobility Server, or POP3/IMAP? Also, when you say the original sender's e-mail address does not display in the "From" field, may I ask what, if any, address is displayed there?
Looking forward to hearing back from you.
Cheers,

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Reduce file size for web use

Hello,
I created a website some months ago and I realize now the images are far too large and it takes a second for them to load. So I opened them in photoshop and changed the PPI to around 50, but the file size didn't shrink. I tried 10, and still nothing. I tried Save For Web and the file size got larger. Any ideas on how to keep the image quality (for web) but reduce the file size for easy page loading? Thank you.

Don't worry over the ppi value. That's arbitrary.
You can reduce the pixel count, by resampling. That will make an image smaller in a hurry. To do this, Image - Image Size, check the [ ] Resample Image checkbox, and change the pixel counts. I always set my Photoshop prefs so that I see the Image Size in pixels by default. If yours isn't reading in pixels by default, change the units so that it is.
However, you may need to have your images be a certain size, in pixels, and so resampling isn't an option. In that case, when you do File - Save As - JPEG (or use Save for Web & Devices), adjust the Quality value to get the image to the size you need.
Hope this helps!
-Noel

Functional Location measuring point UOM not displayed on mobile device

Dear Experts,
I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
The Measuring Points are associated to a FLOC. A work Order with this FLOC has been transmitted to mobile device.
Thanks for your help.
Didier.
Reading Points definition in SAP:
Reading Points on iPhone:
Tags edited by: Michael Appleby

Hi Bill,
Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
WPF client display:
Transmit error:
Agentry log:
readDataObjectMeasuringPoint::begin
BAPI::begin
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
readDataObjectMeasuringPoint::SkipReading=False
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
42499d6d
create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
setImportParameters::COMMIT_WAIT=X
setImportParameters::MOBILE_USER=MJONES
setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
setImportParameters::MIDDLEWARE_CALL=X
setParameters::begin
setParameters::POINT=26
setParameters::IDATE=20140701
setParameters::ITIME=172024
setParameters::MDTXT=
setParameters::READR=MJONES
setParameters::RECDV=0
setParameters::RECDU=***
setParameters::RECDVI=X
setParameters::CODGR=
setParameters::VLCOD=
setParameters::CODCT=
setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
User::rethrowException::begin
User::rethrowException::Exception caught: Unit *** is not created in language EN

Map image url not being displayed on mobile devices

Hey guys
Am having problems displaying the image of the map using mapviewer on a mobile simulator or even a mobile device itself. If i type in the url for the map image in the web browser it works fine, but it i type the url in a mobile simulator such as nokia mobile simulator or even an actual mobile device it does not show up and comes up with an error. why is that? i've enabled images to be shown and set up the proxy and everything properly. the rest of the GUI works fine, just the map image won't show up!! please help...
Avinash

Avinash,
This is really a question for the wireless and voice forum: http://forums.oracle.com/forums/forum.jspa?forumID=49
-Justin

Linking between pages is not working for me on mobile devices. Can someone help?

I can get the page linking to work on my desktop machine, but when I preview on mobile devices through Edge Inspect the page does not work. It tells me the page can't be found. Can someone help? - Thanks Robin

Try downloading Reflow Preview 8 that was released yesterday and see if that fixes it. If not can you post the name of the page you are trying to link too and I'll see if I can reproduce it.
Thanks for you help and thanks for using Reflow,
Chris

How do I reduce MB size for jpg photos?

How do I reduce the MB size for a group of photos I took. I want to save these reduced photos and send them to a client.

IF you want to reduce just the file size and not necessarily the dimensional size...
Create an action to "Save for Web", and run a batch using that action.
I'll show it on a Mac but it's the same for Windows.
1. Open one photo.
2. In the Actions panel click the menu selector and choose "New Action.
3. Name the action and click "Record".
4. Press Alt+Ctrl+Shift+S to Save for Web (Alt+Cmd+Shift+S on Mac).
5. Select a save destination and then close the file, selecting "Do Not Save" when you do so.
6. Press the Stop button.
7. Click File>Automate>Batch.
8. Choose the parameters for the batch and click "OK"
It'll reduce the file size of the photos you chose.

WebtoGo for laptop and mobile device - urgent

Hi,
I need to develop a web to Go application for both laptop and mobile device. The code which i generate for laptop should work on mobile device too.
ie the single application should work for both mobile and laptop devices.
Now coming to lightweight framework and small footprints what technologies should i use in J2EE.
If i use struts is that going to be mess in mobile device. Some one guide me here about choosing the technologies.
Thanks

our java app that we have just ported from PDA to laptop uses AWT components as these work on the PDA. need to go for what will work on the windows mobile device, abnd this may restrict you to older and less functional components.
NOTE platform is defined within the application on the server side (the name of the database on the client), and therefore you will need two applications in terms of oracle lite publications, so define the database name external to the code in some kind of a properties/config file

Best slide size for displaying on ipad?

What size of slide should I be creating on my MacBook for displaying on the iPad?

From the Apple website, the iPad screen is 1024-by-768-pixel resolution at 132 pixels per inch (ppi), so I would guess the default size of 1024 x 768 would be the best. However I don't have an iPad and have never used one, so you may want to ask in the community dedicated to iWork for iOS.

Reduce Form size for display on Mobile device

Similar Messages

Maybe you are looking for