Reduce image on the screen

my desktop and app images are magnified and I can
t get them back to a reduced size.

If everything is zoomed, hold the CNTL key down as you scroll. One direction zooms and the other unzooms.

Similar Messages

HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

Cconnect it to your computer with the latest version of iTunes installed.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

Images in the screen corrupted by some strange lines ...

Hi,
I have many troubles concerning the display on my MacBookPro. Often, the image on the screen is corrupted by black lines and some strange colour patterns. When I use Tiger on the same machine everything is fine. I agree that with the version 10.5.2 the situation is a bit better tan with the 10.5.1, but anyway, this is not acceptable from Apple. When I disable the Quartz Extreme (via a tool in the developer folder), everything is OK. Hey Apple, how to solve this?
Best regards, Edo

I think I solved the problem, but this is not good for Apple.
I checked the hardware specification via the "Abour this Mac" ... and I discovered that my graphic card doesn't support the Quartz Extreme!!!! So, why my Leopard configuration is set to support this feature? I have found this link that for the moment, solved my problem
http://www.macosxhints.com/article.php?story=20040724190553112
I hope that Apple will fix this in the version 10.5.32323
Regards

Satellite Pro M10: image on the screen is very dark

I have a Satellite Pro M10 Notebook that has a black screen, i.e. the back light doesn't work. There is an image on the screen but it is very dark. When connecting an external monitor I get a normal image on that monitor.
From information gathered from other posts here I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but that didn't solve the problem. If I bring the laptop to a service center what will it approx. cost to have it repaired? The thing is 2-3 years old, so if it is very expensive I might better get a new laptop.
I'm sure I will be able to change to inverter board myself, but how will I be able to determine that the inverter is the problem? How to obtain a new inverter? Does anyone of you know the right product number?
My Pro M10 itself has product number PS630E-G205Z-DU.

Hi
I agree with Tobi. You description sounds like a faulty FL-inverter.
This part is placed behind the LCD screen under the lid cover.
As mentioned this part isnt very expensive and you could order it from the Toshiba service partner in your country. But please note that if you have no replacements experiences so you should ask the technicians for the help.

Adding more then one image on the screen

hi all,
    i want to add different different images on the screen.
    this is new task to me ... and as i am new in ABAP
    i am finding it a bit difficult to start with this problem
    so please provide me the complete information from very start to end.
thanks in advance.

hi ravindra,
i had gone through the program and in it ,they are passing the static value in the respective internal table like this
query_table-name = '_OBJECT_ID'.
query_table-value = 'ENJOYSAP_LOGO'.
and i want to know what is OBJECT_ID and where to create it where this image ENJOYSAP_LOGO is stored. plz tell me every thing about the two fields.
regards,

Make image fill the screen

I want to make the image fill the screen like http://www.digitalstormonline.com/bolt-ii.asp, i want it to fill the screen even when zooming in and out

Hi,
did you check this
Add an image to the background of the page or browser | Adobe Muse CC tutorials
Check the below link, under heading "Working with elements set to 100% width"
Adobe Muse Help | Using Fill and Browser Fill options
Do let me know if you have any question.

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

IPhone 5, backlight works but there is no image on the screen. How do I fix the problem or get a replacement?

I have an iPhone 5 32GB that is less than a year old, I smashed the screen not long ago and had it replaced and now the backlight works but there is no image on the screen. Its fully working apart from the screen, can I get a replacement? Or how else would anyone suggest to fix the problem?

Make an appointment at the genius bar of your local Apple store or contact AppleCare. Some Apple Stores in the US can replace the display in an iPhone 5 for $149. If it requires more than that, a replacement phone will cost you $229.

I received a notice to my ipad to update ios7 the latest version. i clicked on update now and the ipad is frozen with an itunes logo and a ipad connector image on the screen. anyone help me with this

I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?

Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
If you can't update or restore your iOS device - Apple Support

Frozen iPod classic with lock and battery images on the screen

When I unlocked my iPod classic while listening to music, everything stopped, and i got an image on the screen of the time when this happened (6:30), a lock image below it on the left, and a black horizontal battery on the right. The iPod won't work now, whether locked/unlocked or whether connected/unconnected to my PC/iTunes. What, if anything is the fix?

Have you tried just a hard reset yet? To do this, first make sure the hold switch is toggled to the off position, then press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

How do I get the "all floating" option in the "layout" to work? Something happened that it stopped working. I like to have several images on the screen at the same time.

I like to work with several images at the same time on the photoshop elements 12 "expert" screen and used to be able to have the "all floating" option in the "layout", thereby altering each image differently on the screen. I'm an artist and view multiple images while painting. But now that option doesn't work for some reason. Help!

Editor preferences>general, turn Allow Floating documents, but then you may need to go to window>images>float all in windows to make it work for currently open files.

A transition using an image (slide an image across the screen)

Hi everyone,
Hopefully a good question I am about to ask. I have 2 clips, and wish to use an image as the transition between those 2 clips. I've seen this sometimes
on TV, where you'll see a clip playing, then a graphic is used - like a side swipe for example, coming in from the left, a graphic slides in from the left, passes
through the middle of the screen, and exits on the right, as it exits, the 2nd clip is now playing.
Does anyone know how to accomplish this ? I thought perhaps there would be a canned video transition available, but none of them allow me to
add an image to any of those effects ( for example in "slide" category under "Slide" in the video transition effect panel.
Thanks for your time !
Dave.

When you unpin it, you can go past the beginning and the end of the clip in the Effect Controls Panel.
As for getting them to run at the same speed, consider this...
You have to wait to start the wipe until the graphic is in the frame and you have to end the wipe before the graphic leaves the frame.
So, figure out the exact middle, and work both forwards and backwards from there. To find the middle of the wipe should be easy, it is generally right at the cut. And finding the middle of the graphic should be easy because it usuaaly starts there. So force a keyframe at that point by clicking on the diamond.
As I write this I realize you need to know where the center of the graphic is so that you can start the wipe when exactly half of the graphic is on screen and end it when exactly half is off screen. So start with the middle, then go to the beginning of the wipe and make sure that the graphic is half on and half off on the left. Then go to the end of the wipe and make sure the graphic is at that halfway point on the right.
The math shoulf force this to work.

How to fit image to the screen of an Android device?

Required to load the image from the gallery (CameraRoll) and fit to the screen entirely.
Tried a lot of ways - completely unable to fit. Always cut off the edge of the image.

You won't be able to write LabVIEW code that runs on the phone to return the data. What you would need to do is look to see if there is an Android App that can publish the data of the phone's internal sensors over TCP/UDP/bluetooth(?) and you can then write your LabVIEW VI to read that data using an appropriate method (e.g. TCP).
I don't know of such an App - maybe you would have to write one which will be non-trivial. I tried a quick search of "sensor data tcp" and "sensor data" and there are some data loggers etc. for the phone sensors so maybe one of those will point you in the right direction.
There is a little bit of information here http://stackoverflow.com/questions/18107148/real-time-wireless-sensor-data-transfer-wifi-or-bluetoot... and here http://onlinepresent.org/proceedings/vol4_2012/50.pdf
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Correcting the Green screen tint appearing while loading images to the screen?

.... the Infamous Green tint that invades the screen, is still there on a whole lot of images - not all, a problem which occurs while images are loading to the screen for viewing. And it's on both the iMac whee it started, and the Macbook.
It was a problem that resulted from an Aperture update last year I think. Any clues?
Thanks,
Raphael

Today, after a year of trying to get rid of thei problem, an Aperture "Craetive" at the Apple store found a way to correct it after contemplating it for about 15 seconds.
Here is the remedy:
To get rid of it, select image(s), go to Photo in the menu bar, hold down Option key, click on Generate Preview in the drop down menu. Wait for it to finish processing - a few seconds. Done.

Reduce image on the screen

Similar Messages

Maybe you are looking for