Reduce margins for text only in Pages

I need to reduce the 1-inch default left and right margins in iWorks '06 to half an inch (.5 in) in the blank template, using only text. I ploughed through the user manual but can't find anything on how to solve that problem. I did see a template with half-inch margins but can't get it to work for me.
Can anyone help me with this?
Thanks.
ghkkoehler

click on Inspector icon, click on first icon in its menu bar and that highlights the document margins. Change to what you want in the relevant boxes and off you go. To make the change active for each box you must click in the next box or hit enter.
deirdre18

Similar Messages

How to reduce opacity for form only not for controls in c#?

I want to reduce opacity for form only. Not for controls. I reduced opacity for form, but the panel opacity also reduced. I don't want to reduce panel opacity. How to do this? Give me solution in c#.

I want to reduce opacity for form only. Not for controls. I reduced opacity for form, but the panel opacity also reduced. I don't want to reduce panel opacity. How to do this? Give me solution in c#.
How do you imagine this will work? You reduce the opacity of the container but not the contents. The user is left with no way of clearing the junk off the screen. Opacity is for Forms and Forms only for a reason.
You could use multiple forms, one without controlbox/icon/text/border whatever contained inside the other, but I expect that's not your goal. What is your goal?
You can also make use of Transparency using simple background color schemes, which works even in RTL layouts.
What is your goal again, apart from taking over the screen without the ability to close the window?
Would you like to know more?

HELP! Need help generating TEXT-ONLY portal page...

Text Only Portal Question:
PLATFORM:
=================================================================
Sun Solaris (5.2 if memory serves) for db and mid-tier, running
8.1.7 DB and 3.0.9 (1.0.2.2) portal.
THE NEED:
=================================================================
I need to display text only portal pages. Some of the more
detailed concerns at this point are below. Also, I've had an open
tar on Metalink for about two weeks, and after research from
their end has resulted in no help.
THE ISSUES (so far):
=================================================================
IMAGES:
If an anchor [A HREF=...] tag uses an image as it's "text", I
need to strip out the ALT= text to show inside the anchor. If no
ALT text is available, then I would like to show the image name
as a default.
For example:
<img src=home.gif
alt=Home>
should display as:
Home
FORMS:
How do I get the resulting page from a form (which include the
login inputs and submit button, search box, advanced search page,
etc.) to be displayed by the text only page?
For example:
When a form is called, the <FORM> elements are as follows:
METHOD=GET or POST
ACTION=url (relative or absolute) to the script.
In this case, the action value is:
ACTION=/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30.
This calls the advanced search API.
I would expect that to redirect the browser back to some
text-only version, the ACTION= element would have to be changed
to be something like:
ACTION=[pathscraper]?/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30
REDIRECTION:
What happens when portal pages redirect internally? How do you
get back to the text-only page?
For example:
The login link on the standard Oracle Portal home page flips
from url to url to get to the actual login page. Our
implementation of Oracle portal goes from
[DOMAIN]/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
to [domain]/pls/portal30_sso/portal30_sso.login_page.
Since this is standard Oracle redirection, how can it be
intercepted so the portal30_sso.login_page can be presented as
text only?
TRIED SO FAR:
=================================================================
I've written a socket/text scraper in Perl, running it from a web
server. The problems mentioned above are really causing problems,
plus the whole cookie thing. Since Oracle Portal tries to push a
cookie to the client, when the client is another UNIX server,
the cookie thing doesn't work.
POSSIBLE OTHER SOLUTIONS:
=================================================================
Something...anything. I've tried to think of some method to
create some sort of PL/SQL procedure to catch the content then
strip out the HTML calls.
An Applet to do the same thing, but on the client side, but
since time is an issue, coding a complete Java applet isn't
really an option.
THE CONCLUSION:
=================================================================
HELP! I need some help. This is for a client that is government
funded, and to meet Section 508 (part of the Americans with
Disabilities Act that states web sites and applications must be
made accessible. A text-only page is one of the requirements for
an accessible page.
Thanks,
Ryan Stefani
ps: feel free to contact me via [email protected] or
[email protected]

Use Find/Change and the GREP tab.
Search for .+ and set the Find formatting to find the charcteristics you want.
What will you do with this text once found? You'll need something to "change" to, either new text or Change Formatting options...

RINGTONE NOTIFICATIONS FOR TEXTS ONLY

I have a new DROID RAZR HD by Motorola in White and it is fantastic. I only want ringtone notifications for TEXTS ONLY. How do I stop ringtone notifications from email and Facebook which I can wait on, but TEXTS I want to answer asap.

In the individual applications chose a silent tone for email and Facebook notifications. Then in the text message application choose the tone of your choice.

I can no longer see my inbox for texting, only those messages I've sent. How do I get my inbox back?

I can no longer see my inbox for texting, only those messages I've sent. How do I get my inbox back?

Tap the Messages button at the top left.

4.0.1 will not load home pages instead loads last view pages even with it set for showing only home page.

I have set under tools, options, general tab for showing my home page but when I restart firefox it loads the last viewed sites instead of the home page.

bump
It seems to be a bad interaction between Tomcat and running as a Windows service.
No thoughts out there?
I guess I'll be forced to upgrade to Tomcat 4.1.27 or 4.1.28. - MOD

Can't input for text, only for numbers

A program I have written has inputs for text and numbers, the text one just comes up and then skips to the input of numbers.
double age, score
String name;
System.out.println ("Age: ");
age = console.nextDouble();
System.out.println("Name: ");
message = console.nextLine();
System.out.println ("Score: ");
score = console.nextDouble();
It justs runs like this
Age:
17
Name
Score:
23
Doesn't let me input anything for text.

I guess the nextDouble() doesn't consume the new line character.
Therefore, the call to nextLine() will read an empty line (corresponding to the empty string between the number read and the 'return key' you hit after entering your number.) You should add a call to nextLine() to consume it: double age, score
String name;
System.out.println ("Age: ");
age = console.nextDouble();
console.nextLine();
System.out.println("Name: ");
message = console.nextLine();
System.out.println ("Score: ");
score = console.nextDouble();

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

Create URL Document for text only string (Not XML)

I want to query a http page that return only a string of text. The response is not formatted with XML. Is it possible to read the value of “parameter1” containing “4321” from the Contact Center Express script?
Response (pure text):
parameter1=4321&parameter2=1234

Getting the response body of an HTTP GET request is as easy as:
Set my_string = URL[http://my-server.local/]
Now, if the response body is formatted as a query string: key1=value1&key2=value2, you will need to further process your results.
You can feel free to search the web for "java query string" to see if there's code out there you like, otherwise, here's one way to do it in UCCX.
/* This Set step makes the HTTP GET request to the web server and stores the response body in the String */
Set my_string = URL[http://my-server.local/]
/* This Do step takes any size query parameter and turns it into a HashMap */
/* E.g., From this: key1=value1&key2=value2; to this: map[key1] = value1, map[key2] = value2 */
Do {
    String[] pairs = my_string.split("&");
    int i = 0;
    int j = pairs.length;
    for (; i < j; i++) {
        my_map.put(pairs[i].split("=")[0], pairs[i].split("=")[1]);
}/* This If step checks the existance of a specific key, and if it exists, we get the value for use in our script */If (my_map.containsKey("key1"))     True          /* The specified key is in the map, set account_number to its value */          Set account_number = (String) my_map.get("key1");     False          /* The specified key is not in the map */
I hope that makes sense and helps you. Ask questions if you need more help. Good luck.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Different margin for odd and even pages

Hi there,
I am writing a book which will be printed in 2 sided paper. Therefor I will need different margin (left and right) for the odd and even pages.
How is it possible in Pages? I am using Pages 5.2 (1860).
Thank you.
Sebastian.

Indesign & Xpress are professional DTP applications. They can layout pages in any order you can imagine with custom margins. They are also complex to learn & expensive in comparison to Pages.
There is a trial of Indesign IIRC…
https://www.adobe.com/uk/products/indesign.html
Quark also has a trial too…
http://www.quark.com
I expect there may be cheaper 'layout' software that is capable of arranging facing pages correctly (possibly from a single pages PDF export from Pages), but I just avoid apps like Pages if I need a finer level of output control.

Best Compression Option For Text Only?

I'll need to pre-render a text element to use in a project later on, and unfortunately, I've tried everything I can think of but I'm simply going to have to add compression to it to make it workable. Uncompressed it's to large and PP crashes when I try to bring it in as a png sequence (as it's over 6,000 frames long).
So, this is just simple scrolling text, lasting 4min and has a transparent background. Can anyone recommend the best compression for a video with just text? My goal is, if I DO have to compress this, to keep it the absolute highest quality possible as it will get recompressed atleast once after this.
I've played around with Quicktime and it seems to have a alpha channel option with some type of PNG compression agent. Not sure if that's the best way to go.
Thnx!

I wouldn't say it's a HDD storage issue as I have a 1.5TB drive. I'm just trying to keep the video file sizes down to avoid unnecessary bloat. The video in question (at 1080p for 4min) is 2GB. That's a little to steep from a storage stand point if I plan to do many of these types of videos.
However, I did some research and tried rendering the same video using QuickTime's "Animation" codec (which is also supposedly a lossless codec). The file size is now down to around 400MB and I have an alpha channel I can use for transparency.
What are your(s) thoughts on this particular codec or are there better options?

Syntax for text element in page windows.

Hi ,
I have written the syntax in page windows as follows:
<B>Customer/Supplier:</> ,, &KNA1-NAME1&
But I am not getting any data in the output screen.
Plz suggest me the correct syntax.
Regards,
Mridul.

SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 .
PARAMETERS: p_cheque   RADIOBUTTON GROUP rb1 DEFAULT 'X',              " Cheques
             p_credit   RADIOBUTTON GROUP rb1,                          " Credit card
             p_bacs     RADIOBUTTON GROUP rb1.                          " Bacs/Chaps
SELECTION-SCREEN END OF BLOCK blk1.
goto ->Text Element Selection Text
P_CHEQUE     Cheques
P_CREDIT                     Credit Card
P_BACS               Bacs / Chaps
you can able to assign text to radio button.
Rewards if useful...............
Minal

Can we put margin for text inside available Tile Templates ?

Hi all ,
We are developing a windows phone silverlight 8.1 application. Using WNS as push notification service. For tile notification using the template "TileWide310x150PeekImage02" for wide tile . Text attribute with id 2 is
appearing a little bit left as compared to text with id 1 .We need all texts inside tile should be on the same vertical line . Here is the Tile images for both square and wide tile . Also is there any way to change the square tile text to small size?
Please tell me how to resolve it
Thank you

Here is a complete list of the tile templates:
https://msdn.microsoft.com/en-us/library/windows/apps/hh761491.aspx?f=255&MSPPError=-2147217396
You could choose a different template to get larger text. In your case you would use TextID 2,3,4,5 and eliminate Text ID 1 to get the text to align left correctly. The TextID 1 is indented just a bit.
Bret Bentzinger (MSFT) @awehellyeah

IPhone International Settings for Texting Only

2 International travel questions. My son will be visiting Zambia. There is no Wifi. We want to communicate strictly via text. We'd like to turn off anything on his phone that might generate unwanted data charges EXCEPT for what he'll need to send and receive texts. What needs to be left on?

Cellular Data: On or Off?
- Enable 3G: On or Off?
- Data Roaming: On or Off?
- Location Services: I'm assuming Off.
All of those can be OFF for regular texting.
All you need to text is the Cellular radio to be on; that is Ariplane Mode turned off.
However if he texts using email through iMessage, or other Apps like Whatsapp, then those need Cellular Data to be on.
With that, you still need to contact the carrier to see what kind of charges are likely to be applied by texting abroad.

Best scanner settings for black and white text only

I need to scan a lot of older text documents, I have a DRG 1100 scanner. what are the best settings for text only black and white, thanks

"How about under "Default Settings"? Is there a option for B&W printing?"
No there isn't.

Reduce margins for text only in Pages

Similar Messages

Maybe you are looking for