Reduce number of rings before Voicemail

I would like to reduce the number of rings before my voicemail comes on on my Blackberry Z10. It is forwarded from my desk phone and that means that customers are waiting an excessive amount of time before my voicemail kicks in on my BB. I called my carrier (Rogers) and they said they were unable to do this. I'm not sure if their tech support was correct in this, as I've seen on other forums that this is the process by which you change the length of the ring tones.
Is there a way to reduce the number of rings before voicemail on my Blackberry Z10 in my settings?
Thanks

*61 *NNN NNN NNNN *11 *X#
Where X is ranges from 5 to 30 seconds before a call get forwarded to the voice mailbox
And NNN NNN NNNN is the VoiceMail number provided by the Carrier
You can locate the Carrier Voicemail Number in 
Phone Settings/Call Forwarding/Forward If Buzy

Similar Messages

  • An extra charge for changing the number of rings before voicemail picks up??

    After trying all the tips I could find about changing the number of rings it takes before the voice mail picks up (the 58#, trying access setup on the vm, changing it online, etc…), I finally called the customer support line.  I was put on hold for a few minutes (not a problem) only to have the customer service person return to say that he cannot change it because I would have to pay for the "upgraded" voice mail that is not included in my plan (the plan I just signed up for last month). I find it absolutely absurd that moving the number of rings for vm from 4 to 6 justifies an added cost.   If anyone knows the magic on how to do this for a line that is in the Dallas Ft Worth area, I would be very appreciative.  As for the extra charge to adjust your own voice mail, you can draw your own conclusion on how fair that is...
    And I don't buy that it is not as simple as it appears... if you can program the thing to pickup on three rings then you should be able to adjust the forwarding  and vm to pick up on 6.  i have never had this problem with any other carrier.

    I called tech support, not customer service, and had my rings moved back a few so my answering machine would pick up first.  Voicemail is for back up in case I don't answer call waiting.
    It was free.

  • Increasing Number of Rings Before Voicemail Pickup

    I can't figure out how to let it ring longer before going to voicemail on my 3G iPhone. Any thoughts? Thanks.

    You would need to call ATT and request that they adjust the number of rings.

  • Number of rings before voicemail

    My phone only rings four times before voicemail kicks in. How do I change this to give me more te to answer?

    This is a setting on the carrier end, not the phone. The easiest way is to call your carrier and ask them to make the change. There are codes you can dial on your phone to change the setting yourself, but they differ by carrier and with no location in your profile, we don't know which carrier you have. But call them. It's not a number of rings, actually, but a time - the max is usually 30-40 seconds.

  • Chaning number of rings before voicemail kicks in

    I need more time to get to my phone. The number of rings should be user settable.

    It is. You're not actually setting the number of rings, but the length of time before voicemail picks up. You can do this in one of two ways:
    1. Call AT&T and ask them to increase it.
    or
    2. Follow the instructions in the following post:
    http://forums.cingular.com/cng/board/message?board.id=palm&message.id=4087
    (I realize this is from the Cingular Palm support forum, but it doesn't matter. The process is the same for any GSM phone.)

  • 6310i reduce number of rings before voice mail cut...

    Can anyone help as to how I reduce the number of times the phone rings before voice mail cuts in?

    When you set the Call Divert, there should be an option for delay, with preset options up to a maximum of 30 seconds I think.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • How do you change the number of rings before voicemail is activated on an iPhone 5?

    Thank You

    I don't believe it is possible to change the time between dialing and when it switches to voicemail.

  • Setting time (number of rings)  before voicemail picks up.

    Voice mail is intercepting calls sometimes after only three rings.  I want to set to 30 seconds.  How do I do that?

    It is already set by the system at 30 seconds and unless something has changed recently, it can't be changed.  Using a different ringtone sometimes helps.

  • Setting Number of Rings before Voicemail

    It seems one cannot.
    James

    Found it.....this is not my great stuff, but from another user. I did try it and it works great!
    You can do 1 of two things..
    1-Call At&t to make your ringer longer
    2-Or you can try it yourself... (Found on another forum)
    The following codes should allow you to control the delay from 5 to 30 seconds on any GSM phone:
    this was not working so I removed it.....let me find a better one that works.
    Message was edited by: tikigiant

  • Changing the number of rings to voicemail?

    Is there any way to change the number of rings before voicemail picks up?  Have looked through everything and can't find anything.  I would like to lengthen the number of rings so I don't miss as many calls.

    The way you change it is specific to your provider. Here are the instructions to change it on AT&T.
    On your phone, dial *#61# and click Send.
    Some information should be displayed: number that the calls are being forwarded to and the delay before the forwarding engages.
    Write down the number (including +1)
    Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum
    Dial *#61# to verify that the new settings are active.
    Not sure about the other providers. If I find the instructions, I'll post them.
    Message Edited by taftwatson on 11-13-2008 06:45 PM

  • Only 3 rings before voicemail.

    How do I extend the number of rings before voicemail kicks in - my 8520 only rings 3 times - not enough to find it and answer it.  Missing loads of potentially important calls.

    As a norm, most all carriers have a default 15 seconds of ringtime until the voicemail picks up.
    If you do need additional ring time before voicemail: 
    The simplest method is to call your carrier and request a longer ring time, up to 30 seconds.
    If you have a GSM based phone, some have had success by dialing this number from your phone: **61*XXXXXXXXXXX**30#
    Replace XXXXXXXXXXX with the number of your carrier voicemail center (find it by looking at your Phone Dialer > Options > VoiceMail > Access Number. Put your access number in place of the Xs above.
    For example, the T-Mobile voice mail access number is 18056377243, and thus the string to dial would be **61*18056377243**30#
    Replace the 30 at the end of the string with your desired seconds. For most carriers, 30 seconds is the longest allowed
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

  • Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    If the codes Tanzim mentioned don't work, just call your carrier and ask them to extend your time until voicemail picks up, to 30 seconds. They do this routinely.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • With a Sprint iPhone, how can I shorten the number of rings before going to voicmail?

    Using a Sprint iPhone, how can I shorten the number of rings before going to voicemail?

    23 rings? Really. My friends iPhone rings 4 times then goes to voice mail.
    I know on Verizon, AT&T and T-Mobile the number of rings is set through the carrier. Have you called Sprint?
    Here is the manual, which is also bookmarked in Safari on your iPhone and can be added for free to your iBooks app through the iBookstore: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • 3315 - Number of rings before diversion to voicema...

    Is there any way of setting the number of rings before diversion to voicemail?
    Currently my 3315 rings about 6 times and then diverts. This is too quick for me and I want to make it (say) 12 rings.
    I cannot find anything on this function in the owner's guide.
    Thanks!

    I also received this belated but nicely detailed response from Nokia Support, so I'm posting it here for posterity:
    In response to your enquiry, the extension of a ring time is a network related feature. Hence, network features are not listed in the phone's user guide.
    You may contact your network provider to request for the ringing time to be extended to the maximum time (normally its 30 seconds).
    If this has been done, you can check if the time delay has been set to the maximum time from the phone.
    1) Menu>scroll to Call Divert and press select
    2) Scroll to Divert if not answered and press Select
    3) select Activate and press OK
    4) select Voice mailbox number and press OK
    At this point, if the call feature has been activated, you will be able to see step (5) as per below. Otherwise, contact your network provider to request them to activate the call divert service and repeat the steps.
    5) Active:Voice Calls, press Details
    6) scroll to Delay and press OK
    7) You will be able to see the time in which the phone will ring before diverting the call to your voice mailbox.

Maybe you are looking for

  • Is it possible to pass TABLE as the output parameter in stored procedure

    Hey Experts,   Is it possible to pass TABLE as the output parameter in stored procedure. eg create procedure spGetData @tableName as TABLE(intValue INT NOT NUL) as 

  • How to Create DTP Filter Variable?

    Hi experts! I noticed that in filter screen of Data Transfer Process it's possible to choose as filter besides a routine a variable too. But how and where I have to define this variable? Thanks a lot. Angelo

  • Building a Disbled vs. Enabled Save Button

    Hello. I have built a Save button which starts off in a disabled state, then gets enabled as soon as the user changes anything in the form. As it turns out, There's a problem with using 'onchange' since it is not recognized by the DOM until the chang

  • JSTL Question

    Hi Guys, I have an ArrayList of HashMaps that i wish to iterate over using <c:forEach> tag. How can i do that? thanks for any help -navjot

  • How do you view your ipod when you are using the remote?

    Every once in a while me and my freinds will be hanging out, and im sure youve all experienced the "oh let me show you this song!!". since we are far away and the ipod is plugged into the computer, the remote is the best option, but how can i get the