Reduce reflection in the display ?

Is there any way to reduce the reflection/glare in my glossy widescreen display ? My monitor is more like a mirror than a display. I really miss the older MAC displays inside the aluminum case.
thanks.

Use a known good Wall Charger. Maybe you are very lucky and really your iPhone is completely charged but not showing you. Try Reset, hold at same time both Home and Power buttons for about 15 seconds until iPhone shuts off by itself and then restarts. If that does not work then use a known good Wall Charger.

Similar Messages

How to change the display light intensity on Satellite A?

I can't seem to find a way of varying the light intensity of the screen. I know this is sacrilegious, but its seemed a whole lot easier to read word doc's and pdf's from the old TFT screens. No functions that I can find in the display settings.
Am I missing something obvious?

Hi,
The light intensity can normally be varied using the Fn+6 and Fn+7 keys to reduce and increase the display brightness respectively.
regards,

HT1199 Im traveling abroad and while I have refused the IOS7 upgrade my iPad is now lock. The display only reflecting iTunes and the USB cable images. Now I can not access my photos and or my email. Anyway I can reset without connecting to my computer

Im traveling abroad and while I have refused the IOS7 upgrade my iPad is now lock. The display only reflecting iTunes and the USB cable images. Now I can not access my photos and or my email. Anyway I can reset without connecting to my computer?

penny175 wrote:
Anyway I can reset without connecting to my computer?
No. Not without access to a computer running iTunes. You do want to use your own computer so that you can restore from your backup and sync your own content back from iTunes.

Time Machine Backup turns on the display

After using the Sleep Display script in Tiger from Dockables, it was a pretty welcome relief to see that you could put your display to sleep with a hot corner = D.
However, I can't get the display to stay sleeping consistently. Whenever Time Machine starts backing up, the display wakes up, which is pretty irritating. I've tried editing the preferences file to change the backup interval, but that isn't really eliminating the problem so much as reducing the frequency of it. The only thing that works is unmounting the external drive and then putting my display to sleep, which is troublesome to say the least.
Are there any workarounds or fixes? My computer goes to sleep just fine, (the drive included), so Time Machine only interferes with Display Sleeping = (.

hmm...any ideas? I think it may have to do with the energy saver pref. to sleep hard drives when not in use. Because periodically, while the computer is sleeping, the drive wakes up and starts making noise, and then the display wakes up :S. Would it have any effect on display sleeping? (eg. Pulling a USB drive out while the computer is sleeping will wake it up and display the unsafe drive removal warning, even without a mouse click or keypress...could it be a similar effect?)
Anyways...I'm also not so sure whether it's an issue with my external hard drive either. It's a 500 GB WD My Book

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

For the people that wants to change the display

i have been bothered with the booklet display since the very firsy day I bought it... there is some kind of noise very noticeable when looking at white backgrounds (do you have this or is it only mine?), at first I thought it was only humidity behind the glass, but i discovered that the display is just like that...kind of cheap.
i was very annoyed by the idea of having a dirty display so I opened the display to try to clean it, to my surprise, the display is like that, with noise! well, so im thinking on changing the display to some crispy clear one but i dont know how to begin with, i just know the size of the display and that's it. maybe someone here can tell me what to look at when buying a new one? will i need new drivers?, what about conections and stuff?
thanks a lot!!!
ps. if you want to try it yourself and open the display you can try it...you just need a prying tool and pass it all around the plastic sheet, in the space between the rubber band and the sheet, you have to pry it deep, since there is like 5mm think of sticky pads all around. it is very sticky, you will hear the glue unstick as soon as you slide the tool around...once you have pryied out one half, then the other half of the sheet will go easily.
you can also pop out the top lid from here, there are some hooks that can just push out and the glossy top lid will open.
you can put everything back without issues, the glue will still hold the sheet.

I am feeling exactly the same way as dcastrog does!
I guess there could be one POSSIBILITY:
Dcastrog and I bought the defective product. So does the guy in this review:
http://www.theinquirer.net/inquirer/review/1565952/nokia-booklet-3g
Read this paragraph :"The quality of the 10.1-inch high-resolution 1280x720 display on the Booklet isn't very sharp, compared with other netbooks. It comes across as a throwback to those early screens that were used in the first Asus Eee PC netbooks from 2007. It's very blurry, which is really highlighted on a white background, such as in Word or a web browser..."
Anyway, if this is not the case, "the "haze" is an anti-glare coating, designed to minimise the reflections visible on the front of the glass" is far from making any sense. We all know what a "ok" anti-glare lcd should look like, but not this way.
Guys who also have a booklet please tell us your feelings about the lcd~
p.s. I'm from a non-english speaking country so excuse me for my poor english expression :-)

Why does the display name in older messages change if I update my address book for that E-mail address?

I have recently installed Thunderbird 24.5.0 after upgrading a WinXP machine to Win7. I have discovered a strange problem with older mail that was imported from Outlook Express 6.
The pastor of my church uses a generic E-mail address <[email protected]>. This address belongs to the position, not to an individual. We recently had a new pastor come to the church, and I updated my entry for this E-mail address to reflect the new person's name. This is fine for new mail sent since the new person arrived, but Thunderbird has also applied the new name to older mail from the previous pastor. This is very confusing, since the current pastor could not have sent mail from that address prior to her start date.
How can I get Thunderbird to stop changing the Display Name in archival messages that were sent by the previous pastor prior to September 01, 2013? I have not encountered this situation before using Netscape 4.x Mail, Outlook Express 6, and Windows Mail (Vista version).

Of course it does. It looks for a match between the sender's email address and a Contact in your address book. You've edited the Display Name for this account so it gets applied to any message with that email address if that's how your Address Book is configured.
In the Contact card for this address, you can tell it whether or not to use the "real" email address within the message, or the Display Name from your Address Book. Telling it to use the name found in the message ''might'' resolve this, but it depends on how the sender has formatted it. If he includes his name then Thunderbird should be able to resolve it, and you just add both configurations to your Address Book as two separate Contacts, rather than modifying the existing entry.
However, in this situation you're using the same email address for two distinct people, so Thunderbird may not be able to know who sent the old messages. If both have sent using "rector@stpeterscobourg.org" without any personalization then Thunderbird won't be able to differentiate between them.
I have to say that I haven't recently tried using different display names with the same email address, so I don't know for sure if TB can use the display name constructively. If there's nothing in the old messages to tell you which sender wrote them, then TB can't do anything about it.

Changes are not reflecting in the page

Hi All,
I have an issue in custom page. In my custom page, if i click approve button for a particular batch, then it will navigate to previous page which contains 10 batches per page in the table structure.
Once i clicked the Approve button it will update the status in the table. It is getting updated in the table but it is not reflecting on the Batches page while navigating to previous page.
Kindly share your suggestions.
Thanks and Regards,
Myvizhi

Hi Myvizhi ,
Since you wish to display a specific row in the table region , then while navigating from update page to search page send primary key and set it as
where clause , so that you can view only updated specific row .
You need to handle this in process Request of your controller class in search page . Let me know if its not clear .
--Keerthi

File Upload data not reflected in the Layout

Hi,
Using the following how to document, I have written the file upload functionality.
The upload functionality works and the data is saved in the cube. We have a layout to display the uploaded data.
Issue:- The data is not reflected in the layout soon after fileupload, even after saving the data in the cube.
If i close existing webinterface and re-execute it. I see the uploaded data.
Once the data is saved in the cube, we would like to see this data in our layouts.
How do we achieve this ?
Appreciate your help.
Regards,
Vinay.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdf

Hi,
When you click on Submit button the file data goes in the buffer and when you click on Save the data gets posted into cube and then the function module release the buffer.
Comment the FM call API_SEMBPS_REFRESH in Save button and refresh the layout, check if you can see the new data in the layout.
Please grant the points if this answer helps you.
Regards,
Deepti

The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, Sara

It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

Understanding the display

Your SmartBand Talk features an E Ink® display that uses electronic ink technology to reproduce the appearance of ordinary ink on paper. In an E Ink® display, no backlight is used. Instead, ambient light from the environment is reflected from the surface of the display, making it more comfortable to read. The image on your E Ink® screen is retained even when power to the screen is turned off. Also note that when the content displayed on the screen changes, there is a brief transition time. This is normal E Ink® display behavior. Some content from the previous screen may still be present in the background of the new screen, this is known as "ghosting". During a special transition sequence, the screen will change from white to black and back to white, on the screen every now and then the "ghosting" will be removed.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

great...
hmm I have a feeling I need to take a few steps back and restructrue my code a little bit.
This whole addChild and display list stuff is quite different than coding for as2.
thank you as always.
sk

Reduced size PDFs are displaying strange colors when viewed on Mac in Chrome browser

I've been routinely creating PDF files with screenshots for documentation, and then using File --> Save As --> Reduced Size PDF... before I put them online. In the past few days when I do this, there's a problem with the files:
when viewed on a Mac (OS X 10.9.4) using the Safari and Firefox browsers, everything's fine. But when viewed on the same Mac using Chrome, the screenshots are pink. If I open the same reduced size file on any other browser or in Preview, it's fine. The original sized PDF is fine, even when opened with Chrome. I'm using Acrobat Pro v 10.1.10.
I've tried rebooting, dumping PRAM, etc all with no effect. I've also taken source PDF files that I had previously 'reduced file size' -- that display fine -- and re-did the procedure. The new smaller files are pink. I suspect it may be a bug that crept into a recent update? All suggestions gratefully accepted.
thanks,
Fran

Make sure that you actually using Adobe Acrobat/Adobe Reader in Google Chrome. Google Chrome has a built in PDF Viewer that is now the default unless you specifically configure and enable Acrobat/Reader to be the default PDF viewer.

Difference in the display/rendering between two 7.4 portal systems

Hi everyone,
At this moment we are faced with a difference in the display/rendering between two 7.4 portal systems (see red area’s in screenshots). Both systems are green field installations.
At our LAB system with EP-BASIS 1000.7.40.7.0.20140421205300 and EP-RUNTIME 1000.7.40.7.0.20140414131600 the portal is rendered as follows:
Our development system DEV is based on EP-BASIS 1000.7.40.8.7.20141217073700 and EP-RUNTIME 1000.7.40.8.13.20150106224500. The portal is displayed as follows:
Both portal systems use the standard SAP Gold Reflection theme.
The expectation was that the DEV portal would have the same view as the LAB portal. Unfortunately, it appears that the DEV portal falls back to the older standard SAP Tradeshow theme when displaying (for example) the Portal Content Studio or the UWL. Different stylesheets (CSS) are loaded. There is no unified rendering and in our opinion this is not correct.
SCN provides much information about the various rendering problems that exists in the use of Internet Explorer in combination with the SAP Portal. However, it is unclear to us where to start with the analysis of this problem.
Answers / suggestions to the following questions will be highly appreciated:
Is it correct that the portal by default should make use of UR when the SAP Gold Reflection theme is used?
Is the difference of rendering caused by the difference in the versions of the EP BASIS / EP RUNTIME? (DEV portal has higher SP/patch level than LAB);
How to investigate this issue further and finally solve it?
Thanks in advance!
Kind regards, Allan

Hi Allan
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok firstly in relation to this particular query, you can find additional information in the following documentation SAP Note:1852400 - UI theme designer (main note) .
Regarding the GOLD Reflection theme from a general perspective this is supported only alongside the UFP framework.
SAP Gold Reflection supports only Unified Rendering Lightspeed
In relation to your two other queries. Could you kindly clarify which particular version of IE you are presently running and also if compability mode is presently enabled/disabled?
Reference Documentation Look & Feel, Framework Pages and Portal Navigation
http://scn.sap.com/docs/DOC-23058
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer
Follow - Troy Cronin

Prestage Package status not reflecting on the console

Hello,
I have extracted some prestage packages successfully on the new DP but for some reasons, it doesn’t reflect the status on the primary server. After troubleshooting, I found
this article which describes my issue similarly.
http://eskonr.com/tag/sccm-2012/page/2/
Where it says, “Will reject this STA for DP”, that similarly matches with my concern.
I have followed the article regarding the script for compare the version difference but what I am not sure is, I believe it ultimately says to redistribute the content to
the DP once more ?
Let me know if I am wrong or if there is any other way as this is happening for many prestage packages.
Not sure how it started all of a sudden when it working since a day before.

Hello,
I have created a new prestage package and it extracted successfully as per the below message in Distmgr.log but for some reasons the status doesnt reflect on the console.
Please help as this is really urgent
Processing status update for package AAA SMS_DISTRIBUTION_MANAGER
11/12/2014 9:25:21 AM 11344 (0x2C50)
Successfully updated the package server status for ["Display=\\<DP server>\"]MSWNET:["SMS_SITE=SiteID"]\\<DP server>\ for package AAA, Status 3
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=<primaryserver>SITE=<SiteID> PID=19600 TID=11344 GMTDATE=Wed Nov 12 03:55:21.886 2014 ISTR0="AAA" ISTR1="["Display=\\<DP
server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400
AVAL0="AAA" AID1=404 AVAL1="["Display=\\<DP server>\"]MSWNET:["SMS_SITE=<SiteID>"]\\<DP server>\"
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)
Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\BKP96Y8Q.STA
SMS_DISTRIBUTION_MANAGER 11/12/2014 9:25:21 AM
11344 (0x2C50)

Masking the displayed destination in Call Redirect situation

We have a Helpdesk script in UCCX that redirects the caller to a specific internal DN during on-call hours (after hours), instead of routing to the CSQ. Helpdesk technicians change a call forward all setting on that redirect DN to reflect whatever external mobile phone number is on call during a particular week.
The problem is that we do not want to disclose the redirect destination (neither the internal DN nor the currently assigned call forward all external mobile number). Currently, once the redirect is successful and the system calls the on-call mobile number, the original internal caller to the Helpdesk will see that final destination number displayed on the phone placing the call.
How can I manipulate the display of the called number for that call redirect?
Thanks a lot for any pointers,
Matthias

Thank you very much, that did the trick! :-)
I'm quite the newbie in UCCX so I wasn't sure if I just couldn't find it there due to my lack of experience... I tried the translation pattern in CUCM instead and that worked without a hitch. I now have UCCX redirect to the pattern configured in CUCM, which translates to my internal on-call destination. What's nice is that I can separately control called name and number restrictions... I restrict the number only but can still display the name label of the internal extension.
Matthias

Reduce reflection in the display ?

Similar Messages

Maybe you are looking for