Reduce set-up time

Hi All !
My Voip network use : Cisco As53xx , 54xx , R72xx , PGW2200 .
When i dial , after finish press the called digit --> tut --> tut --> tut (soo long) ---> ring back tone.
How can i reduce set up time .
what parameters on Gateway , PGW2200 can effect this time ?
pls help me
Thanks
Taipeitel Coo

Hello
Its depend from what actually happen in the network.
I try to explain.
In reality we have some phase with call setup.
1. h225 tcp establishment.
2. Alternative route lookup if primary fail and so on.
3. Signaling.
What actualy happen is unclear.
If 1. you can try decrease h225 setup time on the
gateway.
if 2. this is trade-off between setup time and guaranteed service.
if 3. its again depend which node introduce delay and why.

Similar Messages

Trying to install Premiere Elements 10 on Windows 7 but keep getting error message 'A reduced set of content has been installed' - help!

We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
Thank you!
Adobe Premiere Elements 10.0
Windows
2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)

cathyj
Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
http://www.adobe.com/special/premiereel/downloads/
We will be watching for your progress.
ATR

HT5731 How do I change my iTunes settings to lower the resolution of movies I download to reduce the download time?

How do I change my iTunes settings to lower the resolution of movies I download to reduce the download time?

If you're buying HD movies, you can change the setting in the Store preferences in iTunes to prefer 720p. Or you can just buy SD versions.
Regards.

Reduce the execution time for the below query

Hi,
Please help me to reduce the execution time on the following query .. if any tuning is possible.
I have a table A with the columns :
ID , ORG_LINEAGE , INCLUDE_IND ( -- the org lineage is a string of ID's. If ID 5 reports to 4 and 4 to 1 .. the lineage for 5 will be stored as the string -1-4-5)
Below is the query ..
select ID
from A a
where INCLUDE_IND = '1' and
exists (
select 1
from A b
where b.ID = '5'
and b.ORG_LINEAGE like '%-'||a.ID||'-%'
order by ORG_LINEAGE;
The only constraint on the table A is the primary key on the ID column.
Following will be the execution plan :
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=406 Card=379 Bytes=2
653)
1 0 SORT (ORDER BY) (Cost=27 Card=379 Bytes=2653)
2 1 FILTER
3 2 TABLE ACCESS (FULL) OF 'A' (Cost=24 Card
=379 Bytes=2653)
4 2 TABLE ACCESS (BY INDEX ROWID) OF 'A' (Co
st=1 Card=1 Bytes=6)
5 4 INDEX (RANGE SCAN) OF 'ORG_LINEAGE'
(NON-UNIQUE)

I order it by the org_lineage to get the first person. So it is a result problem? The order by doesn't give you the first person, it gives you a sorted result set (of which there may be zero, one, or thousands).
If you only want one row from that, then you're spending a lot of time tuning the wrong query.
How do you know which ORG_LINEAGE row you want?
Maybe it would help if you posted some sample data.

How can I reduce the recording time of the webcam?

How can I reduce the recording time of the webcam?
thanks
Alex

Keep in mind that Logic also has a limit of 8550 quarter notes. So changing the time signature to 4/8 can get longer recording times. So make sure you change this setting along with the song end. See page 93 in the reference manual.
MBP 1.83 & MDD 1G DP Mac OS X (10.4.7) Logic Pro 7.2.2, Motu 828MkII+828, Firebox LC&XT, Tranzport, Unitor8+(3x)AMT-8's

TO REDUCE THE EXECUTION TIME OF REPORT

HI,
     CAN ANYONE TELL ME THAT, HOW CAN I REDUCE THE EXECUTION TIME OF THE REPORT. IS THERE ANY IDEA TO IMPROVE THE PERFORMANCE OF THE REPORT.

Hi Santosh,
Good check out the following documentation
<b>Performance tuning</b>
For all entries
Nested selects
Select using JOINS
Use the selection criteria
Use the aggregated functions
Select with view
Select with index support
Select Into table
Select with selection list
Key access to multiple lines
Copying internal tables
Modifying a set of lines
Deleting a sequence of lines
Linear search vs. binary
Comparison of internal tables
Modify selected components
Appending two internal tables
Deleting a set of lines
Tools available in SAP to pin-point a performance problem
<b>Optimizing the load of the database</b>
For all entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Some steps that might make FOR ALL ENTRIES more efficient:
Removing duplicates from the the driver table
Sorting the driver table
If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:
FOR ALL ENTRIES IN i_tab
WHERE mykey >= i_tab-low and
        mykey <= i_tab-high.
Nested selects
The plus:
Small amount of data
Mixing processing and reading of data
Easy to code - and understand
The minus:
Large amount of data
when mixed processing isnt needed
Performance killer no. 1
Select using JOINS
The plus
Very large amount of data
Similar to Nested selects - when the accesses are planned by the programmer
In some cases the fastest
Not so memory critical
The minus
Very difficult to program/understand
Mixing processing and reading of data not possible
Use the selection criteria
SELECT * FROM SBOOK.
CHECK: SBOOK-CARRID = 'LH' AND
                  SBOOK-CONNID = '0400'.
ENDSELECT.
SELECT * FROM SBOOK
WHERE CARRID = 'LH' AND
        CONNID = '0400'.
ENDSELECT.
Use the aggregated functions
C4A = '000'.
SELECT * FROM T100
WHERE SPRSL = 'D' AND
        ARBGB = '00'.
CHECK: T100-MSGNR > C4A.
C4A = T100-MSGNR.
ENDSELECT.
SELECT MAX( MSGNR ) FROM T100 INTO C4A
WHERE SPRSL = 'D' AND
       ARBGB = '00'.
Select with view
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T
    WHERE   DOMNAME    = DD01L-DOMNAME
        AND AS4LOCAL   = 'A'
        AND AS4VERS    = DD01L-AS4VERS
        AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
SELECT * FROM DD01V
WHERE DOMNAME LIKE 'CHAR%'
       AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
Select with index support
SELECT * FROM T100
WHERE     ARBGB = '00'
       AND MSGNR = '999'.
ENDSELECT.
SELECT * FROM T002.
SELECT * FROM T100
    WHERE     SPRSL = T002-SPRAS
          AND ARBGB = '00'
          AND MSGNR = '999'.
ENDSELECT.
ENDSELECT.
Select Into table
REFRESH X006.
SELECT * FROM T006 INTO X006.
APPEND X006.
ENDSELECT
SELECT * FROM T006 INTO TABLE X006.
Select with selection list
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
ENDSELECT
SELECT DOMNAME FROM DD01L
INTO DD01L-DOMNAME
WHERE DOMNAME LIKE 'CHAR%'
       AND AS4LOCAL = 'A'.
ENDSELECT
Key access to multiple lines
LOOP AT TAB.
CHECK TAB-K = KVAL.
ENDLOOP.
LOOP AT TAB WHERE K = KVAL.
ENDLOOP.
Copying internal tables
REFRESH TAB_DEST.
LOOP AT TAB_SRC INTO TAB_DEST.
APPEND TAB_DEST.
ENDLOOP.
TAB_DEST[] = TAB_SRC[].
Modifying a set of lines
LOOP AT TAB.
IF TAB-FLAG IS INITIAL.
    TAB-FLAG = 'X'.
ENDIF.
MODIFY TAB.
ENDLOOP.
TAB-FLAG = 'X'.
MODIFY TAB TRANSPORTING FLAG
           WHERE FLAG IS INITIAL.
Deleting a sequence of lines
DO 101 TIMES.
DELETE TAB_DEST INDEX 450.
ENDDO.
DELETE TAB_DEST FROM 450 TO 550.
Linear search vs. binary
READ TABLE TAB WITH KEY K = 'X'.
READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.
Comparison of internal tables
DESCRIBE TABLE: TAB1 LINES L1,
                TAB2 LINES L2.
IF L1 <> L2.
TAB_DIFFERENT = 'X'.
ELSE.
TAB_DIFFERENT = SPACE.
LOOP AT TAB1.
    READ TABLE TAB2 INDEX SY-TABIX.
    IF TAB1 <> TAB2.
      TAB_DIFFERENT = 'X'. EXIT.
    ENDIF.
ENDLOOP.
ENDIF.
IF TAB_DIFFERENT = SPACE.
ENDIF.
IF TAB1[] = TAB2[].
ENDIF.
Modify selected components
LOOP AT TAB.
TAB-DATE = SY-DATUM.
MODIFY TAB.
ENDLOOP.
WA-DATE = SY-DATUM.
LOOP AT TAB.
MODIFY TAB FROM WA TRANSPORTING DATE.
ENDLOOP.
Appending two internal tables
LOOP AT TAB_SRC.
APPEND TAB_SRC TO TAB_DEST.
ENDLOOP
APPEND LINES OF TAB_SRC TO TAB_DEST.
Deleting a set of lines
LOOP AT TAB_DEST WHERE K = KVAL.
DELETE TAB_DEST.
ENDLOOP
DELETE TAB_DEST WHERE K = KVAL.
Tools available in SAP to pin-point a performance problem
The runtime analysis (SE30)
SQL Trace (ST05)
Tips and Tricks tool
The performance database
Optimizing the load of the database
Using table buffering
Using buffered tables improves the performance considerably. Note that in some cases a stament can not be used with a buffered table, so when using these staments the buffer will be bypassed. These staments are:
Select DISTINCT
ORDER BY / GROUP BY / HAVING clause
Any WHERE clasuse that contains a subquery or IS NULL expression
JOIN s
A SELECT... FOR UPDATE
If you wnat to explicitly bypass the bufer, use the BYPASS BUFFER addition to the SELECR clause.
Use the ABAP SORT Clause Instead of ORDER BY
The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The datbase server will usually be the bottleneck, so sometimes it is better to move thje sort from the datsbase server to the application server.
If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT stament to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the datbase server sort it.
Avoid ther SELECT DISTINCT Statement
As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplciate rows.
Good Luck and thanks
AK

Reducing Initial Startup time in Flex 1.5

How can we reduce initial startup time of a flex application
? Suppose we have a large application , and we want to reduce
application startup time. Is it possible that we are able to devide
application into multiple SWF files and (Initially ) only those SWF
files are downloaded on client which are initialy required ? How
can we acheive this i.e architecting application in such a way that
intialy some SWF ( only required on client side ) are downloaded on
client and remaing are downloaded only when they are actually
required by client ?
any help would be appreciated !!!!!!!!!!
thanks

Thanx for your reply !
yes i want to create similar look.I have two questions
regarding this
1) I have little idea that we can acheive such look by using
creationPolicy = "queued" , my question is ..........suppose we are
using a tabNavigator with 4 tabs and in each tab we have set
creationPolicy="queued" . we are using mxml custom components of
each size 20 Kbs. First time either only first view will be loaded
on the client side(size 20 K) or all 4 views(size 80 K) will be
loaded. It is really important becuase I want to reduce initial
startup time.
2) How we can use such component which show size of contents
downloaded ( as used at
http://www.merhl.com/
). any sample code ?
thanks once again !

PE7 is "not full" and is a reduced set

ok so i bought this program quite some time ago and i still have it on my computer. and when i opened it it says that
"A reduced set of content (Instant Movie Themes, Title and Menu Templates, etc) has been installed. To install the full content set please insert your
program DVD and run Install Content.exe If you do not have a program DVD please visit
http://www.adobe.com/support/downloads/product.jsp?product=101platform=windows
to download the content installer"
the thing is i don't have the DVD and when I went to the link:
http://www.adobe.com/support/downloads/product.jsp?product=101platform=windows
it is broken. please help. thanks.

Is it possible the reason you don't have a DVD is because the software was bought as an electronic download?
If so, the following link may help.
http://kb2.adobe.com/cps/406/kb406662.html
Basically what they say is that the executable content file is likely already on your computer. Look for a file called PRE7_Cont_WWEFGJ.exe on your computer, and if it is there, double click it to install the full content.
And if that file is not there, the full content for PRE7 is available at this link:
http://www.adobe.com/support/downloads/product.jsp?product=101&platform=Windows

How to set snooze time

Hi ,
Please let us know how to set snooze time to 5 mintues in Iphone5. At present it is having snooze interval of 10 minutues.
We are able to see Snooze off / on but i need to reduce snooze time from 10 minutes to 5 minutes.
Appreciate your valuable inputs.
Thanks

It says in the User guide about the snooze:
"Don't want to get up just yet? When an alarm sounds, you can snooze the alarm. This pauses the alarm for a predefined length of time.
When the alarm sounds, select snooze."
My question is how can I do the predefining? It is now 10 minutes and I would like to make it shorter.
Another question was, if I can define the alarm volume separately from the other sounds of the phone? How can I set the phone mute for sleeping time, and still use the alarm to wake upp?

Want to reduce Log switch time interval !!!

Friends ,
I know that the standard LOG SWITCH TIme interval is 20/30 minutes , i.e., every time it is better switch redolog 1 to redolog 2 (or redolog2 to redolog3) within 20/30 minutes.
But in my production server , Logfile switches within every 60 minutes every time in the peak hour . Now my question , How I can make a situation where my logfile should switch to another logfile between 20/30 minutes .
Here my database configuration is :
Oracle database 10g (10.2.0.1.0 version) in AIX 5.3 server
AND
SQL> show parameter fast_start_mttr_target
NAME TYPE VALUE
fast_start_mttr_target integer 600
My every redolog file size is = 50 MB
In this situation , give me advice plz how I can reduce my logswitch time interval ?

You could either
a. Recreate your RedoLog files with a smaller size --- which action I would not recommend
OR
b. Set the instance parameter ARCHIVE_LAG_TARGET to 1800
ARCHIVE_LAG_TARGET specifies (in seconds) the duration at which a log switch would be forced, if it hasn't been done so by the online redo log file being full.
You should be able to use ALTER SYSTEM to change this value.
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to reduced instance recovery time

Hello Friends how are you all. I hope you all will be fine. friends I want to reduced the instance recovery time but i don't know which views or parameters which could helpful for me. Please tell me the way how can i reduced the instance recovery time.
Thanks & Best Wishes

Hi,
Reduced instance recovery time
check ur DB size, is it connected many users.
my advice is do not set the reduced instance recovery time, it may be decreased run-time peformance.
the following procedure
-) Frequent checkpoints
-) reduce instance recovery time
-) set FAST_START_MTTR_TARGET parameter
-) size the Online redo log files
-) Implent manual checkpoints
-) reduce log_buffer size
-) Decrease run-time performance

How do i set my time capsule up to function as an external hard drive

How do i set my time capsule up to function as an external hard drive? Is this even possible? I had a friend tell me it woudl be a good set up to get a time capsule with my Macbook Air to use as a gigantic external hard drive but then was unbale to wlak me through the setup after I bought the equipment. Any suggestions?

It depends on what you already have equipment wise..
Just bridge the TC..
I cannot walk you through it either if you use v6 airport utility.. due to my refusing to run Lion until it gets network issues sorted.
Download and run the real utility http://support.apple.com/kb/DL1482
Go to manual setup..
Internet tab
Connection sharing.. select off bridge mode in the drop down box.
You can then if you like turn off wireless under airport wireless.. The TC is now a plain network client with hard disk.
Personally I would keep the wireless on but sort the channels manually if you already have a wireless AP or router.

How do I set up Time Machine to work with an Iomega network hard drive?

I have just bought a new iMac having switched from Windows, and am very much a beginner when it comes to all things Apple. Previously I had used my NAS hard drive with my old windows pc. i successfully used it to transfer a lot of data from the old pc to the iMac but can't seem to get it recognised when I try to configure time machine. I have downloaded the latest version of Iomega Home storage manager which appears in the application folder in the dock, but when I click on The HSM icon it just disappears and nothing happens. I can access the drive through the Bonjour service and can see its contents in Finder. I have looked through the forums here but much of the info assumes a level of knowledge that i don't have. Is there an 'idiot's guide' anywhere to enable me to set up time machine to use the network hard drive?

You would probably benefit from a couple of things, first going through these 2 links
Time Machine FAQs & Time Machine Troubleshooting.
If you still have questions there is a TM forum, because TM is part of OS X you will find the forum in the Snow Leopard forum. Click Apple Support Communities and in the search field type Snow Leopard. Once you are in the correct forum you can narrow your search by clicking Refine this list.
Roger

Set up time not considered

Hello ,
I am using PP-PI.
The resource category is '001' machine and having std formulas 'sap001' for setup and sap002 for processing and other formula 'sap006'
The recipe has setup time and processing time .When i run MRP the planned orders are created but no set up time is considered in it.
I tested the formula in resource and it calculates set up time.
What settings i need to check ?
Also, for the planned order , in det.scheduling tab system shows 'capacty requirments'(in min).
But this does not match with production dates.
Example - prod dates- 10.06.09 ( 14:00:00) to 24.06.2009(24:00:00) = 10*1440(days avlb capacity) + 14:00 = 14410 mins.
But the capacity req shown is 15000 mins( opr qty *processing time).
What settings i need to chk ? kindly advise
Regards
ShankarR

Shankar,
Have you maiantained the scheduling parameters for planned order in OPU5?
If not then execute the same & under 'Detailed scheduling mark 'Scheduling' & 'Generate capacity requiremnt'.
Regarding the differnce in capacity requirement & scheduling, make sure you use similar formulas in scheduling as well as capacity tab page.
Hope this helps you.
SmanS

Having trouble setting up time machine.

I'm trying to set up time machine and I go to the program, click it on, and then I click "choose backup disk", but there is nothing there. Is there anything I am supposed to do beforehand to give Time Machine a backup disk to save in?
My next question isn't about time machine but it might be related. I have to reinstall windows on my mac. I had it before and somehow it caught a virus, so I had to erase and it went to ****....long story short, It broke, I fixed it. Now i have to repartition my drive though. I assume that I have to split it three ways, one for Mac, Windows, and Time Machine. My question is....I want to leave Mac with the most space of all 3, obviously....whats the minimum I can split it to to install Windows xp and get Time Machine working (unless I'm way off and time machine setup is a different way)?

So one can't back up to a partition on the main disk with Time Machine?
The iMac comes from the factory with a single partition. If you want TM to backup to a second partition on the iMac internal drive, you will need to Partition the drive using OSX disk that came with the iMac (this erases every thing on the hard drive) and reinstall the OS from the DVD.
But, I do not recommend that approach. Backups are generally needed if your hard disk crashes. If you are backing up to a partition on the internal disk, you will lose your backup if/when the drive crashes.
The only reason to use TM on a partition on the internal drive is if you are doing a LOT of version sensitive work (meaning you made need to look at yesterday's work on the same project). But most applications can be set to do incremental change backups of individual projects making TM a ppor choice anyway.
Buy an external drive for the TM backup.
(jk)

Reduce set-up time

Similar Messages

Maybe you are looking for