Reduced confirmation quantity not correct in ME22N/ME23N

Hi Guys,
We are working with confirmations for our purchase orders.
The problem is this:
After GR (+ corrections like 102 movements), the reduced quantity for the confirmation is correctly updated in the EKES-table.
Also, the stock & requirements list shows it correctly. Everything looks fine there.
However, when i look at that confirmation in ME22N or ME23N (confirmation tab), the reduced quanity visible is entirely different than visible in EKES and MD04 (and not correct).
Any ideas?
Thanks,
Paul

This problem has been solved by implementing OSS Note 1343257

Similar Messages

  • Total confirmation quantity not equal to planned confirmation quantity

    HI
    In co11. if i entered more than operation quantity
    its showing warning message
    Total confirmation quantity not equal to planned confirmation quantity
    Message no. RU117
    how can i change into error msg???
    thanks in advance

    Dear,
    Go to OPJB then select
    00000000     RU  117 Total confirmation quantity not equal to planned confirmation quantity  E- Error.
    It will work for you.
    Regards,
    R.Brahmankar

  • Confirmed Quantity not displayed in SO

    Hi All,
    Recently we went live on ECC 6.0 and now we are using APO for availability.
    We have an issue: A sales order contains 5 line items. The first line item is confirmed for Feb mid. the other items are not confirmed while creating the SO. User later some time ran the availability and was able to deliver the rest 4 line items. Delivery process was totally completed.
    But the issue lies in SO the above said 4 line items are not showing any confirmation, all of them are showing 'ZERO' qty in confirmation column.  But at the same time all the line items status shows 'Fully Delivered'. Even i checked the VBEP table it shows ZERO confirmed quantity.
    As the delivery was completed, when i ran availability in SO system not even showing us the availability screen.
    I checked all the settings related to availability, and in quality system we can able do the process normally.
    Now my question is what could be the reason, why the system is not displaying the confirmed quantity in its column.
    immediate response will be appreciated and help us in fixing this issue.
    Thanks in advance
    Venkat Cheedalla.

    Hi Venkat
    If i am not wrong when the sales order was created out of 5 line items only 1 line item might have got confirmed with quantity and other with Zero quantity. But the other 4 line items might be having Zero stock at its plant and when you have done Rescheduling then at the time of delivery the stock got confirmed also and the sales order got closed .That is the reason it is not showing quantity in delivery quantity feild  in sales order. but the delivery status might be complete.
    Kindly check the VBUP table If it is showing the entire document flow then it is working , but if VBUP is also not getting updated means then you should take help of ABAP'er
    Regards
    Srinath

  • The confirmed quantity not posting in COOISPI

    Hi Gurus,
    Currently, there is an issue in COOISPI wherein the process order has been confirmed and delivered however, confirmed quantity in the report is 0 but the delivered quantity is correct. The finished goods are auto-GR. The transaction code used is COR6.
    Need help on this!
    Thanks,
    Mae

    Hi Tao,
    The control keys are:
    The control keys used in the recipe are PI01, PI03 and NATP
    Thanks,
    Mae

  • PO Partial confirmation Quantity not updated for non-catalog items in SRM

    Hi Experts,
    Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
    Steps to Reproduce:
    1) Create a purchase order.
    2) Confirm some part of the quauntity and reject the balance part in Ariba.
    3) Open the link in SRM and click Copy push button.
    4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
    Expected Result:
    PO should update the changes done in Ariba.
    Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as  in the Catalog items partially confirmed POR is copied onto PO.
    kindly give your valuable inputs to poceed furthur.
    Regards,
    Chandu

    Hi,
    I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
    BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
    Regards,
    Masa

  • Is there a BAdI to correctly calculate Confirmed Quantity in TLB Shipment?

    Hi,
    We added a new TLB parameter on top of currently existing weight, volume and floorpsots. Now, everything is working fine with the new parameter except for the "Confirmed Quantity (Dest.Loc.)" in the TLB shipment is not showing the total for all the relevant shipment items. The total is actually reflecting the "Confirmed Quantity (Dest.Loc.)" of the first line item in the order.
    Is there a BAdI to correctly calculate the Confirmed Quantity in the shipment level?
    I would really appreciate any help on this. Thank you in advance.
    Arnel

    Hi Arnel,
    Please check the below BADis whether suits your requirements which are TLB based
    /SCA/TLB_EXT     Transport Load Builder Extension
    /SCA/TLB_PRFL_EXT     TLB Profile Extension
    /SAPAPO/SDP_TLBORDER     Manipulation of Deployment Orders Before TLB
    Please confirm
    Regards
    R. Senthil Mareeswaran.

  • Quantity not posted to object error in while activity confirmation

         Hello All,
    i am getting below error while activity confirmation , please help me on this below.
    Note : Activity and cost center and KP26 no changes are made compare to preview year and current year , for the fiscal year 2014 i didn't get any error , only for the fiscal year 2015 i getting  below error.

    Dear Hari,
    If the activity type of the confirmation has set the flags as
    mentioned (indicator MANIST in table COKL is set) the system will simply
    NOT post any quantity on the sender cost center/activity type during
    the confirmation.
    So all quantities which are currently missing (as these were not
    updated by the confirmation) must be posted with transaction KB51N.
    If you implement the coding corrections of #760437 you have the
    possibility to change the message BK263 from "I" to "A" in transaction -
    which is however not recommended.
    So the advised procedure is:
    -post all mising quantities with transaction KB51N first
    -then run the report ZRKMANIST_RESET to remove the flag MANIST (which is
    the reason why the confirmations did not post quantities on the
    sender cost centers)
    After this procedure, the quantities will again be updated when you
    post confirmations.
    Best regards,
    Jason

  • Unrestricted quantity not reducing in MMBE

    When we are reserving materials through maintenance order (IW31),
    we can see the reserved quantity through MMBE.
    but the unrestricted quantity remains the same and does not reduce.
    This is not correct. If we are reserving a material in the maintenance
    order, then its unrestricted quantity should reduce and the reserved
    quantity should increase.
    This is not happening in our current scenario.
    For e.g
    if there is a material A and it has unrestricted quantity as 2.
    If i reserve 1 quantity through maintenance order.
    Then its unrestricted quantity should reduce to 1 and reserved quantity should increase to 1.
    but when we view the MMBE transaction, it shows quantity 2 in unrestricted and 1 in reserved.
    Shouldn't the unrestricted quantity reduce to 1??
    Please advise.

    Hi,
    I have done further investigation and found something further wrong with this.
    E.g, Material A has unrestricted stock as 5.
    I createa a reservation for 1 through maintenance order.
    So, effectively, unrestricted stock = 4 and reserved  stock = 1 (total = 5)
    But SAP (MMBE) is showing unrestricted stock = 5 an reserved stock = 1 (That means I have quantity 6 in total !!!!!!!!!! which is wrong)
    Now, I do an unplanned goods withdrawal agains cost center for quantity 5. SAP lets me do it. Ideally, it should give me altleast a warning that quantity 1 is reserved.
    Now when i do my planned goods issue for the maintenance order, it gives error 'deficit stock'.
    This is wrong business process!! If i have reserved quantity 1, how can somebody else issue it??
    Please advise,
    Many thanks.

  • Consignment pick up - quantity not confirmed

    Dear All,
    Iam creating consignment pick up KA order and material is at customer place, but in order its not confirming, i checked MB58 , stocks at customer place, but in order its showing its not confirmed quantity in schedule lines.
    Could you all give me some inputs where iam going wrong.
    Thanks in advance
    Regards
    Ramki

    Hi,
    Please check OSS note 1299473 - Consignment pick-up not marked as returns would help you.
    Following is the details of the note;
    Symptom
    You use the order type KA "consignment pick-up". Although this order type specifies  returns, it is not marked as returns.
    The item category KAN "consignment pick-up" used for the order type KA is marked as a returns item category.
    This may result in mixed business transactions that may not be processed correctly by the system in all cases.
    Reason and Prerequisites
    This is caused by an error in Customizing.
    Solution
    In Customizing for the order type KA, change the sales document category to returns (TVAK-VBTYP = 'H') to prevent mixed business transactions.
    After that, check your business processes with order type KA.
    Hope this helps resolve the issue.
    Regards

  • How to control not to confirm quantity in sales order schedule line

    Hi,
    We have a problem with confirmed quantity in sales order schedule line.
    When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
    I need in some cases that system not to confirm quantity in schedule line at item level.
    I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
    Could you help me? How can I avoid the system to confirm quantity in a sales order item?
    Thanks in advance....

    Hi Lakshmipathi,
    I'm sorry. The rejection was a bad example.
    I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
    Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
    I've tried with rutine in OVB8. But It didn`t work
    I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
    Thanks

  • Confirmed quantity or reservation - What is correct concept

    Dear Gurus,
    I am facing the trouble between the concepts of confirmed quantity and reservation quantity. As I know material's quantities in SO will be confirmed after run ATP and TOR if stock quantity is enough, and see in  stock requirement list this quantity is in confirmed. But I am not sure that confirmed quantity is different with reservation quantity for SO or not. If not how can I reserve this quantity for SO not by MB1C. I afraid that, other staff will create SO and delivery it before my SO can be delivered. Please explain for me in this case.
    Thank for your support!

    Hi,
    Let us take the scenario like:
    Total Unrestricted stock as on 08.11.11 = 100 pcs
    Sales Order number 6000001 QTY 10pcs with confirmed schedule line for delivery on 08.11.11
    When next sale order is being created, you can see the ATP qty as 90 only and not as 100. So if the sale order qty is 100 pcs,
    then system confirms only 90 pcs.
    Hence,
    If availability check is customized properly, then, the issue of SAP confirming schedule line without stock does not arise.
    Your fear that other staff creating a SO and delivering before your SO also does not arise. You can check the u201CATP quantity fieldu201D in the Sales tab of the overview screen for each item.
    Reservations will not show in MMBE.
    Please check and confirm
    Hope this helps.
    Regards,
    Sharan

  • Restrict Yield to be confirmed should not less then operation GR quantity.

    Dear Sap Gurus,
    I have an issue. I want to restrict Yield to confirm quantity should not be more or less then operation GR quantity.
    I am doing production order confirmation through Co11.
    How can i restrict it ? or please guide user exit for that.
    Regards
    rvyas

    Hi
    You can use implicit enhancement to restrict the confirmation in CO11N screen.
    Check with your ABAPer to use it.
    Regards
    Bala

  • Not able to confirm quantity in Schedule Line

    Hi all
    I created order for 1000 quantity, stock available was 1000, confirmed quantity 1000. Now when i deleted this order and trying to enter fresh order for 1000 units i am not able to confirm the quantity as it is showing confirmed against the deleted order. please guide me how to go about.
    regards
    Rajesh T

    Dear Rajesh
    Check in document flow VA02 by entering the deleted sale order number.
    If delivery is created and saved without doing PGI, then you wont be able to assign the stock to another order.  Delete the delivery document also and retry.
    Thanks
    G. Lakshmipathi

  • SRM Invoice and Confirmation fields not populated in Standard content DSO

    We are implementing an extended classic SRM Scenario in our company, along with SAP recommended standard solution for BI. While activating the PO DSO (0SRPO_D1) confirmation quantity (SR_CFQBU) and amount (SR_CFVOC) along with Invoice quantity (SR_IVQBU) and amount (SR_IVVOC) are not getting populated.  Is there a recommended solution to correct this scenario?

    This problem has been solved by implementing OSS Note 1343257

  • Material Confirmed quantity and Open quantity

    Hi All,
      I am working on a report where the user wants the material confirmed quantity and open quantity at the batch level. I know for open quantity VBBE-OMENG can work. Just need confirmation that this is the correct field. However for confirmed quantity I am not able to narrow it down to one field. I have the following fields as possibilities but not sure which is the right one.
    1) VBBE-VMENG
    2) VBEP-BMENG (This is the at the sales order level though. We need it at the batch level)
    Can you please let me know if i have the right approach here? The report has Material, plant, sloc and batch along with a bunch of other fields.
    Regards.
    Sid

    Hello,
    you should extract the quantities from all the deliveries selected for material and batch, and selecting only open deliveries.
    Use a selection like this:
        SELECT lips~MATNR lips~WERKS
               lips~CHARG lips~LFIMG
          INTO TABLE lt_lips
          from lips as lips
          INNER JOIN vbup as vbup
            on lips~VBELN = vbup~VBELN AND
               lips~POSNR = vbup~POSNR
         WHERE lips~MATNR = p_matnr
           AND lips~WERKS = P_WERKS
           AND lips~CHARG = P_CHARG
           AND ( vbup~WBSTA eq 'A' or
                 vbup~WBSTA eq 'B' ).
    Best regards,
    Andrea

Maybe you are looking for

  • EFFICIENT way of escalating an open task

    I need to escalate TASKS that are still open after 31 days. I figure i need 2 workflows to do this. As i see it right now: 1st WF. Waits for 31 days after the task has been created. On the 31st day it changes a read only field called "escalate" to YE

  • How to change workcenter in my routing while creating producton order?

    we have 4 workcenters in routing. PP guy configured the system in such a way that when production order is created, it will by default assign 1st workcenter in the routing as work center. I need to write prg to change the work center in the routing f

  • Wifi does not work correctly on iPad Mini w/ Retina display

    I've found that Wifi does not work properly on the iPad mini w/ Retina display. Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with

  • Removing non-alphanumeric characters

    Hello, New to Oracle (not so new to SQL) and this is my first post ... please be kind :-) Anyway, I have a variable length string that I would like to separate into separate rows/columns. the structure is as follows: |G^7130^R|C^7130^R|G^7131^R|C^713

  • Use of macro's in Integrated Planning

    Dear all, Considerations regarding planning in Excel or Web are taken into account. Customer likes to connect existing Excel-sheets to Planning Excel-sheet. Macro’s are available for this in BPS-Excel (transfer data to SEM-BPS1 sheet). Some questions