Reduced images when viewing a forum with safari

Hello all,
I was trying to view an image that had been posted on a forum that I am subscribed to, using safari on my iPhone. I know that the image is 800x600 because I saw it full size with my office computer BUT when I try to view the same image on the same forum it only shows a tiny little image that fill a tenth of the screen even if I zoom in.
Is there something that prevents safari on iPhone to display the image in full size? Maybe a setting that needs to be turn on/off?
Thank you

Thanks but it did not open in a new window. It's directly inside the forum posts.
I would have noticed if it was a new window.
Funny thing is that I see the image in full size when the page first loads up then it shrinks to a pityful size which, BTW, is not a clickable thumbnail.

Similar Messages

Can't view PDF links with Safari

When I'm online with Safari, and click on a PDF link, Safari tries to view it using QuickTime, and all I get is the first page. (I have the latest version of Adobe Reader.) If I use Safari to view a PDF file that is already on my hard drive, once again QuickTime is used, but this time it plays as a movie and flips through all the pages when I hit PLAY. Somebody help.

Hi,
Try changing your QuickTime preferences:
System Preferences -> QuickTime -> Advanced -> (MIME Settings...) -> Images - Still image files -> PDF Image -> Uncheck this option
That's the path for 10.4.x and it's been a while since I used Panther, but hopefully the route is still roughly the same.
Hope that helps.

When viewing my webmail with firefox there is nothing in the inbox, but all other folders are fine

problem is when viewing my webmail with Firefox there is nothing in the inbox, but all other folders are fine.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have recently designed a website and images do not show up with Safari 5.1 on my mac

I am running 10.6.8 and when my web page loads none of the images load or only a couple and it seems like it completely forgets about them because they will align to the left. it is fine on other versions of Safari, Firefox and ie but only with this update. When i hit the refresh button it will then show my images. Is it not reading my css or something like that?
Any help with greatly appreciated.
Thanks
Nibby

Quit Safari.
Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari. See if that helps...
And make sure: Display images when the page opens is selected in Safari / Preferences - Appearance.

View PDF files with Safari

After I updated to Adobe Acrobat Reader, Build: 10.1.3.23
the following changes occured in Safari: the Preview toolbar at the bottom-center of the page has been replaced by a similar looking Acrobat Reader toolbar.
Nastily in Acrobat Reader preferences / Internet / Display PDF in browser using: Applications/Adobe Reader.app is greyed out! I can't untick it.
Responsible might be this installed Plug-in (in Safari)?: Adobe Acrobat NPAPI Plug-in, Version 10.1.3
Adobe Acrobat NPAPI Plug-in, Version 10.1.3
Adobe® Acrobat® Plug-in for Web Browsers, Version 10.1.3 — from file “AdobePDFViewerNPAPI.plugin”.
application/pdf
Acrobat Portable Document Format
pdf
application/vnd.adobe.pdf
Acrobat Portable Document Format (Interim)
pdf
application/vnd.adobe.pdfxml
Acrobat XML Portable Document Format
pdfxml
application/vnd.adobe.x-mars
Acrobat XML Portable Document Format (Interim)
mars
application/vnd.adobe.xdp+xml
XML Data Package
xdp
application/vnd.adobe.xfd+xml
FormFlow99 Data File
xfd
application/vnd.adobe.xfdf
Acrobat Forms Data Format in XML
xfdf
application/vnd.fdf
Acrobat Forms Data Format
fdf
How can I uninstall Safari Plug-Ins?
How can I get back to viewing PDFs in Safari with Preview? (In Finder pdf documents are still set to be opened with Preview.)
Thank you.

Here's my problem, running 10.7.3 and Safari.
I installed the 10.1.3 and have been running in 64 mode. If when viewing a PDF I choose File>Save As... I get a dialog saying "Export as... and upon trying to do so I get an error message that it can't export.
If, however, I choose the little floppy icon in the popup at the bottom I get a "Save a copy as..." and everything works as expected.
If I delete the Adobe plugins as specified in earlier posts, I get the Preview view of PDFs in Safari and Save As works normally.
I tend to like Adobe's viewer because it defaults to a bigger view, otherwise it's apples/oranges, er adobes.
Rob

No Sound when viewing Flash content in Safari for Windows

Hopefully someone can help.
Just recently, I've been unable to get sound when viewing Flash content on the web.
I currently use Safari for Windows, when I use Internet Explorer on the same computer I can get sound. Just no sound when using Safari for Windows????
Please help, I like Safari for Windows much better than I.E. but I'm forced to use IE when I want to watch something with sound.
Thank you

Are you using Safari 3.1.2?
Try reinstalling the Flash plugin at: http://www.apple.com/safari/download/plugins.html

Logon to this forum with Safari

If I try to use Safari to logon to this forum I get a blank username as if I was a new user.
This issue has been there before, but an update to Safari solved that problem (and other cookie issues). But when !0.6 came the issue came back.
Is I the only one with that problem ?

HI,
Try Safari maintenance...
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Safari add-ons can cause performance issues or other situations
Also, if you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Quit Safari then relaunch.
In that same Get Info window make sure "Open in Rosetta" is NOT checked.
Carolyn

Difference when viewing PDF render with /workspace-server/ and /DocumentManager/

Hi all,
There are 2 scenarios when viewing file in attachment:
1) When user is processing the form, they view the attachment in attachment tab. The url's format is: https://mydomain/workspace-server/documents/-6195445997301787088-16.pdf
2) My client's requirement is to view files in attachment tab even after the process is complete.
What i have done is to write a custom java component, retrieve attachment of the last task and return to user.
The url has format: https://mydomain/DocumentManager/docm1266831910962/53650adc3948bd502cf8c81d4885feec?type=Y XBwbGljYXRpb24vb2N0ZXQtc3RyZWFt
(I also found that the file is generated under GDS folder)
In both of the cases, navigateToURL() function is used to view the pdf in new window.
My trouble starts from here. In several client's machine, case 2 always ask them to save the form instead of viewing in the browser, while case 1 always can be viewable.
Below is the image of case 2 when i click in the link:
The strange thing is in local environment, both cases are working ...
Is there any idea why it happen?
My client is using windows xp, IE 6 and adobe reader 9. Some of them are using windows vista, IE 7 and adobe reader 9.
In local environment, we have tested successfully with
1)
Window XP
IE6/IE7/FireFox/Google Chrome
Adobe reader 9
2)
Window vista
IE7
Adobe reader 9
Regards,
Anh

You are confusing me
But first, the setContentTypeFromBasename() is an ES2 addition to the Document class. Didn't realize this was a pre-ES2 case. Sorry about that.
Next, you say you are removing the ?type=ASDFASDFASDF from the url on the client. This must be there so the DocumentManager servlet can set the proper content-type in the http response. I looked at the code and if it isn't there, no content type is set so it will be browser and os dependent on what it will do,although i would expect most to prompt.
And however your custom component and the short lived process work, that document output variable needs to have the proper content-type set in it (the Document has a setContentType() method in 8.2 but you will have to do the mapping from file extension to mime-type yourself in 8.2). If it does and you don't remove the type parm from the url, then things will work. But if that type parm isn't there or the content-type isn't set in the document output var, the browser will not know which application/plugin to launch and will prompt.
Jon

Highly pixelated image when viewing at 100%

Dear Forum:
I'm using Aperture 3.0.1 on a MacBook Pro 2.53 GHz Intel Core 2 Duo; 4GB 1067 MHz DDR3. Using Mac OS 10.6.2.
I'm making a photobook, extra large size. I placed an image in a photo box that covers the entire page (in other words, the photo has no borders) When I look at it in 100% view. The image is startlingly pixellated as if it's a low res image (The image is not a super-cropped image of the original) Will the book print out that way or is it okay for the image to look low res when making the book?
Thanks,
Steve

Dear Thomas,
I don't see the yellow triangle on the image which is good. But the image is nevertheless low res when viewed at 100%. If I move the image in one or two directions, the image clears up and becomes sharp as it should be. But, when I come back to image after working on another page, and do 100%, the image is once again low res. I'm wondering if this is just a preview issue or if it will actually affect the PDF file that will eventually by generated for printing.
Thanks,
Steve

No scrolling when viewing man pages with Gnome terminal?

Hi all,
I have just installed Oracle Solaris 11 on x86. For a long time I've used Solaris 9 on SPARC. I like the new OS, but I'm having a problem viewing man pages with Gnome terminal. When I view a long man page, e.g., "man newfs", I don't get a functional scroll bar on the right hand side of the window. And although the space bar works to advance the page, when I reach the end, it doesn't return to the command prompt. It just beeps, prints "END", and I can only exit by closing the window. Can anyone tell me how to fix this? Suggestions would be much appreciated.
Many thanks,
Chris Tidy

It does sound like you're using "less" instead of more. When you see the "(END)" prompt you can simply type "q" and it will exit back to the command line prompt making it unnecessary to close the window. See the "less" manual page for more detail on the less command. Under Solaris 9 the paging was done with the "more" command. If you set the PAGER environment variiable to "more" the man page will use more and revert to the behavior you'd be used to with Solaris 9. Less erases the text you've already read when you type that final "q" which is a behavior I don't like. I didn't bother to determine if there is a way to fix that with less, I just went back to more. The choice between "more" and "less" is a personal preference.

TS1367 Fix for when viewing a page in Safari, the computer flips back to the Finder page, sometimes quickly sometimes it gives me a little time to view before flipping back to the Finder page

I need a fix for when I'm viewing a page in Safari, the computer flips back to the Finder page, sometimes quickly, sometimes it gives me some time to view before flipping back

http://support.apple.com/kb/ht4137

Finder window always opens when I enter TM with Safari as active app

I want to recover some bookmarks I think I must have accidentally deleted in Safari, so I plug in the firewire drive I'm using with TM into my laptop and wait until the drive mounts on the desktop. I launch Safari and make sure it's the active application (it says "Safari" next to the apple in the menu bar at the top of the screen and I have a Safari window open). I make sure there are no other applications running and the finder has no open windows. I launch TM. A Finder window opens, and the default directory it opens to is my Desktop, unless I already have a finder window open to some other directory. This happens every time I launch TM so I can never actually use TM to recover my deleted bookmarks. So in other words I never have the option to restore anything in Safari. Interestingly, this problem does not occur when I launch TM with the Mail application as the active application. I thought I'd read that you can restore deleted Safari bookmarks with TM, but is it actually not designed to restore anything in the Safari app or is my TM simply malfunctioning? I have tried to get this to work numerous times, including after reboots and after running new TM backups.

el4 wrote:
I want to recover some bookmarks I think I must have accidentally deleted in Safari, so I plug in the firewire drive I'm using with TM into my laptop and wait until the drive mounts on the desktop. I launch Safari and make sure it's the active application (it says "Safari" next to the apple in the menu bar at the top of the screen and I have a Safari window open). I make sure there are no other applications running and the finder has no open windows. I launch TM. A Finder window opens, and the default directory it opens to is my Desktop, unless I already have a finder window open to some other directory.
Actually, this is normal behavior since Safari is not yet one the 'Time Machine Aware' applications. You are not going to easily be able to restore individual bookmarks. But you restore ALL of your bookmarks from any given backup. do the following:
First, quit Safari.
Go the the folder here...
/Users/<youruserfolder>/Library/Safari
Highlight the file labled bookmarks.plist.
While holding the "Option" key down, drag this file to the desktop. This will create a copy there in case you wish to return to this set of bookmarks later.
Now launch the Time Machine "time Travel" interface from the Dock.
Using the time scale on the right, navigate back to a date that contained the missing bookmarks.
Click "Restore" in the lower right.
Choose to replace your current set of bookmarks with this one.
Once completed, launch Safari and the restored bookmarks are available.
Later, you can drag the bookmarks file on the desktop back to the Safari folder to return to your previous set. Otherwise you can delete it.
Let us know if this resolve your issue.
Cheers!

How can i resize the icons when enclosing a file with safari

With safari as well as with firefox it happens form time to time to enclose a file in the html page. There is a way to enlarge the icon preview ?
thanks
PS
same is any dialog form to open a file.....must be a way to enlarge the icons i hope in the open file dialog from within photoshop rather than another application.
thanks

If the paths are open just click the intended end-point with the Pen Tool (P), add a point and delete it again.

What does Private mean at the bottom of my iPhone screen when viewing my windows in Safari?

Private appears at the bottom of my iPhone screen while viewing open windows in Safari. What does it mean?

Touching Private will switch ON/Off private browsing mode.
Private Browsing
Private Browsing in iOS protects private information and blocks some websites from tracking your behavior. Safari doesn't remember the pages you visit, your search history, or your AutoFill information.
Note: While Private Browsing is enabled, the Safari bars appear black or dark.

Problems with dark Artifacts on images when viewed on PC screens???

I have a very urgent problem concerning Adobe Photoshop CS3, my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results. I only use Photoshop CS3 to enhance digital products images.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery. Could this possibly be something with Photoshop?
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

Thanks for all your comments and so quickly.
To be clearer, I am not working in CMYK for image enhancing at all, but windows RGB in photoshop, which is darker than working CMYK or Monitor RGB. I just use the CMYK colour scale in the photoshop colour picker window to see what values are around the object.
its not 4 across all four but on average C4, M2, Y1, K0.
When saving in save for web the images look fine on my screen, pretty much the same as the photoshop tiff file.
Each image has adobe RGB 1998 embedded when saved as a tiff file.
The client looks on internet explorer 7 on their PC's and also within Photoshop.
Colour settings within photoshop are using MacUser magazine's recommended setting from 2006: RGB: Adobe RGB 1998, CMYK: Euroscale Coated V2, Grey: Generic Grey, SPOT: 20% dot gain. Engine: Apple CMM, Intent: Relative Colorimetric. Also Black point compensation and User Dither are checked.
Also the monitor calibration is set at 6500 at 2.2 gamma.
To be clearer about the dark shadowing and the artefacts. When using levels I click on a shadow point to remove all but a slight shadow. Then I sometimes need to use the faded eraser to clean up or lessen the shadow. The image looks fine on my screen, but in the levels window I drag the black pointer about a third of the was across the screen to simulate what the client is seeing on their screen. This is quite a long way to drag the slider. I can sometime see the edges of the image, or white holes where the eraser has been. The lines are areas around the object that have been rubbed out a bit.
I agree that colour values will show on a screen, but the effect of the shadow should be smooth and not clearly visible with an edge?
http://www.ideo-sync.co.uk/p110741.jpg
also p110741.tif
I have uploaded the layered tiff file and the web jpeg to my server, so you can hopefully see something odd?
If there is a problem with my cinema display at least its under warranty, and the new Spyder3 pro should help when it arrives in a few days time.
Hopefully I can pinpoint the exact cause to this and take steps to stop this ever happening again. I am very grateful for your advice and help.
Kind regards,
Jason.

Reduced images when viewing a forum with safari

Similar Messages

Maybe you are looking for