Reduced Radio and 4G Data Reception Post-Update

Hi!  I've been having quite the adventure with my phone lately.  Before the update, I used to receive 4G with all four bars filled at work at my desk.
After the update, I've rarely been able to get 4G reception at my desk... Usually it is 3G, sometimes it is 1X, and sometimes there is no data connection at all (usually, of course, it blinks out while I'm trying to do something on my phone)... it is as if the update screwed with something in the phone to make 4G signal weaker.
At home, it is harder to tell because I live closer to the edge of 4G reception, but I noticed last night that the bars do toggle a bit more (the 4G reception itself is fine though).
I work in downtown Louisville, KY so I should receive good service as I had before... I'm near a window, and my building isn't particularly big nor is it near a lot of especially tall buildings.
Any help would be appreciated!  Thanks!

I have the same problem. I use my TBolt as a hotspot for my laptop at work. Before the MR2 update, I almost always had a good, consistent 4G connection about 80 to 90% of the time and it would occasionally drop to 3G for a short period, then pick up 4G again. Since the update, the situation has reversed and I'm in 3G about 80 to 90% of the time and can't keep a 4G connection.
I can also tell you that the solution I use to fix it is one that Verizon tells us not to use. Before the update, I always used LTE onOFF to choose my connection and always used CDMA + LTE/EvDo auto which gave me a good 4G signal. Since the update, Verizon has added their own switch and is telling us to uninstall any third party apps such as LTE onOFF. Unfortunately, Verizon's switch doesn't work as well, so now I have reinstalled LTE onOFF and I now set it to LTE mode and it seems to force it into 4G. That seems to keep me in 4G most of the time again, but when it does drop out, it goes to 1x instead of 3g.
I know it's not the location because I had a good 4G signal in the same location before the update. When I'm in LTE mode with LTE onOFF, the Verizon switch still shows LTE/CDMA because it doesn't have a choice of LTE only, only CDMA only.
Maybe I'm not suppose to be using a third party app and maybe it's not suppose to work, but it seems to keep me in 4G a lot more consistently than Verizon's built in switch.

Similar Messages

  • Are there any programmatic means of reducing paging and increasing efficiency of insert/updates?

    We have a multi-terabyte database which daily receives tens of thousands of records to insert or update. Most online advice on reducing memory paging covers server memory options and dynamic memory management techniques.
    Are there any tested programmatic or database design techniques that could also be explored to increase efficiency?
    Thanks,
    Tom

    > How long is it taking now to process this workload?
    About four hours. The record data is inserted/updated across multiple related tables.
    Across about how many tables?
    Four hours seems a bit long for 100k rows to merge, say half updates and half new inserts (and whatever you do about deletes, maybe treat them as slowly changing dimensions), but my first move would be to just treat it as an optimization question and use
    the profiler to get a list of the longest running and most expensive queries, and see if they can be individually improved.
    Just basic stuff - do you handle the rows one at a time and commit for each one, or are the processes done relationally and with one commit per batch?
    Josh

  • How to reduce reading and recording data time/ Visual C++, PCI 6024E and PCI-MIO-16E?

    Right now I am working on a data communication programme. The time of reading digital signal and recording data is more than I expected, which is about 100 microsecond. I need to reduce the time. The software I am using is Visual C++ 6.0. I use two DAQ boards, which are PCI-6024E and PCI-MIO-16E. I have set the priority of Visual C++ to be realtime by task manager. The operating systme is Windows XP.
    I am wondering how to set the interrupt of reading or writing data to be the highest and stop any other kind of interrupt.
    Thanks in advance!

    The primary limitation you will encounter when trying to do high speed
    digital I/O using your E-Series hardware is that the digital lines are
    all software timed.  This means that for each and every digital
    read it is necessary for your software to issue a command to your
    hardware, read a single point, then receive the response from the
    board.  This prevents you from performing digital operations at
    very high speed.  In general, I would say that 100 microseconds is
    a very good response using software-timed digital I/O on a Windows
    computer.
    It is difficult to make a good recommendation without more detail about
    what you are trying to do.  You may need to consider switching to
    a Real-Time operating system, or upgrading your DAQ hardware to a board
    that will allow you to time your digital acquisitions on the board
    itself.  These devices, such as the m-Series DAQ or the PCI-653x
    series, would allow you to use hardware triggers for your digital
    acquisitions, change detection, and buffered data acquisitions to
    reduce the software overhead involved in a rapid acquisition.

  • Calling a new browser window with WD Abap and passing data via POST

    Hi there,
    does anybody know whether passing data via POST method is possible when opening a new browser window from within a Web Dynpro Component? In my case I use method IF_WD_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW for opening a new browser window. Now I want to pass a big amount of data which is only possible via POST method. How can I achieve that or is it not considered inside the Web Dynpro Framework?
    Kind regards,
    Albert

    Hi Priya,
    can you please explain a little bit more what you mean? I didn't get it..
    Kind regards,
    Albert

  • CRM BP Migration - telephone and Fax data not posted

    Hello Experts,
    I am having an issue while posting a Contact using IDoc in CRM 7.0, the contact is created, all data is ok, email is posted, but fax and telephone information is not posted.
    Have anyone faced this issue and now how to solve this?
    Thanks!

    Hi Nhlanhla,
      You can achieve this by IDOCS or XIF Function Modules.
       Preferred is develop a program using CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_REL_SAVE for better performance. Here you will find Z fields create through EEWB also.
      For IDOCs
    Message Type         CRMXIF_PARTNER_SAVE_M
    Basic Type           CRMXIF_PARTNER_SAVE_M03
    Message Type         CRMXIF_PARTNER_REL_SAVE_M
    Basic Type           CRMXIF_PARTNER_REL_SAVE_M02
    Regards,
    Bhanu

  • Urgent: contacts and calender , data lost after update

    i updated my iphone to ios4 last night , it took alot of time doing the backup of it i went to sleep and in the morning i found it without any data on it , the screen showed a message that the phone was activated . nothing more!!
    i conect it to itunes and it asked if its new phone or restore it , i pushed new . then nothing..
    any sugestions please help

    Do a reset on the phone, what happens after that?
    Can you sync? Can you restore from backup?

  • Get start and end date for posting period (YYYYMMM format)

    In revenue recognition I'd like to have the start date and the end date of the posting period, which is in format YYYYMMM. It's field VBREVR-BDJPOPER.
    Any idea?
    I had no luck so far to find a relevant FM.
    Thanks in advance,
    Peter

    Hi,
    Use this FM To convert the date into DD.MMM.YYYY format
    <b>CONVERSION_EXIT_SDATE_OUTPUT</b>.
    Use the followiong FM To convert the date into <b>user specified</b> format
    <b>SLS_MISC_CONVERT_TO_DATE</b>     
    Rewaed if helpful.
    Regards,
    Sandhya

  • Initializing and overlaying dates(second posting)

    I am attempting to initialize a formattedTextField with the current date. I then want the user to be able to enter a date before the current date. The format I am using is MM/dd/yy. I want my user to be able to enter the date and not have to worry about the "/"s. If I don't initialize the field with the current date but with "00/00/00". The field behaves as required. I can use the following code
    MaskFormatter formatter = new MaskFormatter("##/##/##");
                formatter.setPlaceholderCharacter('0');
                FromDate = new JFormattedTextField(formatter);
                FromDate.setValue("00/00/00");When I attempt to add the date as initialization I use the following code:
    MaskFormatter formatter = new MaskFormatter("##/##/##");
                formatter.setPlaceholderCharacter('0');
                FromDate = new JFormattedTextField(formatter);
                 DateFormat df = DateFormat.getDateInstance(DateFormat.SHORT);
                FromDate.setText(df.format(new Date()).toString());The date appears correctly. The field does not behave as before. It inserts characters instead of overlaying and doesn't seem to respect the mask.
    What is a good way of initializing the date and overlaying the initialization while respecting the "/"s.

    I am attempting to initialize a formattedTextField with the current date. I then want the user to be able to enter a date before the current date. The format I am using is MM/dd/yy. I want my user to be able to enter the date and not have to worry about the "/"s. If I don't initialize the field with the current date but with "00/00/00". The field behaves as required. I can use the following code
    MaskFormatter formatter = new MaskFormatter("##/##/##");
                formatter.setPlaceholderCharacter('0');
                FromDate = new JFormattedTextField(formatter);
                FromDate.setValue("00/00/00");When I attempt to add the date as initialization I use the following code:
    MaskFormatter formatter = new MaskFormatter("##/##/##");
                formatter.setPlaceholderCharacter('0');
                FromDate = new JFormattedTextField(formatter);
                 DateFormat df = DateFormat.getDateInstance(DateFormat.SHORT);
                FromDate.setText(df.format(new Date()).toString());The date appears correctly. The field does not behave as before. It inserts characters instead of overlaying and doesn't seem to respect the mask.
    What is a good way of initializing the date and overlaying the initialization while respecting the "/"s.

  • Hear AND see data reception stop when iPhone 4 is touched

    As it turns out, it doesn't just lose a bar or two - you can not browse the internet at ALL when phone is held in left hand. This is my second phone. Read the description on the youtube vid too.
    http://www.youtube.com/watch?v=Wzn8QhrYIvI

    At this point, the product description goes like this, "Browses the internet and makes phone calls as long as you don't touch it AT ALL right HERE."... I'm sure this isn't what Apple is going for and I cant see them NOT making this right.
    Combined with the specific problem of touching the phone - my iP4s (both of them) have less than stellar reception in my local. They both routinely sit at 1 bar and drop calls.
    Basically, this is a combo problem of the phone itself and something being difference in certain areas or about certain cell towers. Hopefully they come out with a fix soon. I can see the class action attorneys wetting their lips over this one - because there will be plenty of people to jump on THAT bandwagon.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • SP02 showing update was terminated and not showing Spool no and other data

    Hi Friends,
    Can anyone guide me in the below problem
    After going to change mode of transaction when i go to message and i have done repeat output and further data and communication methods.
    After that i have saved document.
    After that when i enter into transaction SP02 it is showing that update was terminated.it is not showing the Spool number and the other data in the screen.
    it is showing a message that List contain no data.
    plz help me how to proceed and what r required for this problem.
    and plz say me how can we get the unit test reports for the developments

    Hi
    I've checked in the program before calling BAPI_TRNASACTION_COMMIT if it returns any erros after BAPI_INCOMINGINVOICE_CREATE.  It will check any missing data.  The error happends only if I tried to post a blanket order with multiple items.  With single item, it's working fine.    The data are correct.  I'm wondering what causes this error.

  • Updating start date and end date at header level for a contract

    As per the requirement I have to create a contract and assign the start date and end date to the contract.
    I am using BAPI_CONTRACT_CREATEFROMDATA for creating a contract. I am assigning value for start date and end date for header data of contract in fields
    -CT_VALID_F and CT_VALID_T of CONTRACT_HEADER_IN import parameter and also setting the corresponding indicator in CONTRACT_HEADER_INX parameter.
    The BAPI executes successfully and does not return any error but when I check the start date and end date for contract in va43 the values are not assigned.
    I also want to update the start date and end date for contract in other case for which I am using BAPI_CUSTOMERCONTRACT_CHANGE and passing date values to the same fields as those create but it give me an error while executing. The error is as follows:
    Field 'GUEEN' cannot be changed, VBAKKOM 2000000162 ready for input.
    Can anyone suggest what can be done for update the date values?
    Thanks in advance.
    Komal

    So are we... The BAPI BAPI_CONTRACT_CREATE has the following importing parameters:
    HEADER     TYPE     BAPIMEOUTHEADER
    HEADERX     TYPE     BAPIMEOUTHEADERX
    VENDOR_ADDRESS     TYPE     BAPIMEOUTADDRVENDOR
    TESTRUN     TYPE     BAPIFLAG-BAPIFLAG
    TECHNICAL_DATA     TYPE     BAPIMEOUTTECH
    Change the HEADER and HEADERX parameters as I have indicated in my first post.
    Regards,
    John.

  • Report on the dates and the times that software updates went out to partucular machines

    Hello all,
    I need to know if there is a way to report on the dates and times that certain software updates installed on certain machines. I see a report that could be it but it does not show any results. The report that I am talking about is under Software update - Distribution status. When I try to run any of those reports I get no matching records could be found so I guess I have 2 questions.

    Yes, I know this is an old post, I’m just trying to clean them up.
    There is no report that will show you when a SU was installed on a PC. At best you can use the last change date but they is no reliable for several reasons. As for your second question, I’m not sure what report or category you are looking
    at. You will need to provide more details.
    http://www.enhansoft.com/

  • App Store shows 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    App Store shows that I have 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    I have the same issue with one App in the App Store. The app is installed and current. But the App Store says I have an update. I tried restarting. No help.

  • How to update link and import data of relocated incx file into inca file?

    Subject : <br />how to update link and import data of relocated incx file into inca file.?<br />The incx file was originally part of the inca file and it has been relocated.<br />-------------------<br /><br />Hello All,<br /><br />I am working on InDesignCS2 and InCopyCS2.<br />From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing).<br />Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon.<br />So I tried to recreate and update the links.<br />Below is my code for that<br /><br />//code start*****************************<br />//creating kDataLinkHelperBoss<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br /><br />/**<br />The newFileToBeLinkedPath is the path of the incx file which is relocated.<br />And it was previously part of the inca file.<br />eg. earlier it was c:\\test.incx now it is d:\\test.incx<br />*/<br />IDFile newIDFileToBeLinked(newFileToBeLinkedPath);<br /><br />//create the datelink<br />IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked);<br /><br />NameInfo name;<br />PMString type;<br />uint32 fileType;<br /><br />dlk->GetNameInfo(&name,&type,&fileType);<br /><br />//relink the story     <br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br /><br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA);<br /><br />relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); <br /><br />ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); <br /><br />//Update the link now                         <br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); <br />//code end*********************<br /><br />I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.)<br />I tried using <br />Utils<IInCopyWorkflow>()->ImportStory()<br /> ,But its import the incx file in xml format.<br /><br />What is the solution of this then?<br />Kindly help me as I am terribly stuck since last few days.<br /><br />Thanks and Regards,<br />Yopangjo

    >
    I can say that anybody with
    no experience could easily do an export/import in
    MSSQLServer 2000.
    Anybody with no experience should not mess up my Oracle Databases !

Maybe you are looking for

  • Looking for a replacement calendar

    Does anyone know if there is a replacement calendar app where I can open up the appontment box on tapping the time I want to make the appontment? (ie like the Blackberry method) I want to bypass the default process of tapping the +, then fill in the

  • Safari on iPad Air 2 flashes random pages from history

    iPad Air 2 64GB WiFi running 8.1.3 When I open Safari, a random page from my history (usually from days or weeks ago) flashes on the screen for 1/2 second and then shows the current webpage. I've cleared History and Website Data in Settings>Safari. S

  • Need Help With File Matching Records

    I need help with my file matching program. Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and th

  • Project Release

    Hi all, My client requirement is, Person A should create project and can change but he should not have authority to release it. once the project A is created, person B must have a look at it, if everything is fine, he must release it not person A. pl

  • Edit view not representitive of filmstrip view

    I am trying to edit backgrounds. I can see a background in the filmstrip view but not on the stage in edit view.. Whats up? I have included a screen shot.