Reducing PDF size with textfields, checkboxes...

Hello All,
I have a pdf which i've embedded a few hundred textfields and checkboxes on.
The native size of the pdf was ~120KB, after the addition of the input fields it's 1MB.
I'm searched and performed the suggestions in the pdf optimizer section, to reduce images, remove embedded fonts, etc.
But it appears there is no way to reduce the size when there are embedded input fields.
Any suggestions would be appreciated.
Thank you,
M

Post your question in the forum for Adobe Acrobat.

Similar Messages

I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro. The application keeps timing out and at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes. T

I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro. The application keeps timing out and at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes. The document is 275 pages. Is there something I can do to stop this?

Hi Ricci,
Since when are you facing this issue? Did you tried system restore to a date before this problem occured.
Does acrobat stop working when you open this specific pdf file or with any pdf file that you open?
Regards,
Rahul

Reducing .pdf size with InDesign

Good morning everyone!
I have downloaded the trial version of InDesign to see if its the right tool to a very specific problem we are having in our engineering office and I have never used InDesign before.
I need to dramatically reduce the overall file size of multi-page PDFs for underlaying in AutoCAD while retaining the detail from the original. The PDF files we recevied from our client are rather large and underlaying them "as is" brings AutoCAD to a crawl. I have been able to shrink the files appropriately in Illustrator but I would have to do it one page at a time to be able to reduce the file size which does not solve our time problem (I have one project in the pipeline that is going to require 200 pages). JPEG's kind of work which I can do in batches in Illustrator, but AutoCAD does not have automation for underlaying JPEGs. Keeping the PDF in vector fomat is the ideal solution if we can get the file size down.
So far I have opened illustrator and tried to run the script for adding a multi-page PDF and what I bring in retains absolutely no detail from the PDF.
So two questions:
1) Can/How do I bring in a PDF drawing so it retains the vector detail, and
2) Can I use Illustrator to shrink down the file size of a multi-page PDF (Adobe pro doesn't bring it down far enough)
I know this is nowhere near the purpose of InDesign, but its our last avenue to solve our underlay issue in a way where everyone might win.
Thank you!

You have to check where is highest amount of space used in the pdf? Are these images or structures you need or you don't need? Is it a profile? Use the audit function in the Acrobat Pro Optimizer dialog.
When you know which part of the content of the pdf could be dismissed you can set up a properly pdf export setting or use a different export functionality to create pdfs like the export of interactive pdfs which will output smller pdfs.

I want to reduce pdf size up to 5mb for mailing perpose, anybody have any option to reduce it since I have used optimiser & reduce file size option but its not helpfull.

I want to reduce pdf size up to 5mb for mailing perpose, anybody have any option to reduce it since I have used optimizer & reduce file size option but its not helpful.

The optimizer can reduce space, but some things can't get smaller. Text for example. Play with the settings, examine the results of Audit Space Usage.
Or give up. Even 5 MB is too large for a bulk mailing, by far. Instead put it on your web site and mail a link - done!

Reducing PDF-size: automatic reduction of datapoints that are used to draw lines in a 2d-axis system within report

Creating fancy pdf-files for costumers and other purposes is great. However, if the experimental data include many datapoints (>200000) a line-2d-graph ends up in a very big pdf-file. Especially when many pages need to be used.
Explanation:
When I use lines to show experimental data in 2d-plots the size of my PDF-file is directly influenced by the number of datapoints used. The more datapoints are used to draw lines within the graph, the bigger the exported PDF-files of the report are.
It would be great to limit the number of points used to draw a line as it can be done with markers without using the curve transformation option. - Hence, e.g. plotting a line with the help of 200 datapoints is usually as good as showing the same line based on 200000 datapoints but the pdf-size is significantly reduced. You can imagine that when this would be done via the transformation option a long lasting script would be needed for each line to reduce the number of datapoints shown. Hence, the plotting within the report and the actualisation of data would need very long.

Since a while DIAdem optimizes the size of exported PDF-files in a related way as it is suggested here. In principle the PDF-file is exported in a very high resolution, so you can display it in a reader with a very high zoom value (e. g. 6000 %) to look into details of your data. If you have a huge dataset, this could lead in fact to a bigger file size, if data points could be displayed because the high PDF-resolution. But in general, DIAdem only saves information in a PDF-file which is really necessary - but with a high resolution.

Reduce file size with action wizard

(German version below)
Hey,
I got two questions for action wizard in Acrobat XI Pro.
I try to reduze file size of many PDFs using acion wizard. My tests worked fine but now I got some problems I try to explain now:
1. I add a directory with many subdirectorys to my process list. Adobe now adds not only PDFs to my list, it also adds JPGs, DOCs etc. That means I have to delete every single file I not want to convert to PDF cause I only want to reduce file size of excisting PDFs. Is there any possibility to only add PDFs in my processing list?
2. If a PDF is opend by any other user I get a information about it. This info I need to acknowledge every time it pops up cause my process interrups. Is there any possibility to ignore this info?
I´m happy for any help i can get here. Thx.
Regards
(Sorry for bad english, it´s not my favorite language )
Hallo Leute,
ich benötige Hilfe beim Benutzen des Aktionsassistenten im Acrobat XI Pro.
Ich versuche bei sehr vielen PDFs die Dateigröße zu verringern. Dazu habe ich mir eine Stapelverarbeitung per Aktionsassistent erstellt die bei meiner Testumgebung auch super funktioniert. Leider habe ich noch einige Probleme für die ich Hilfe benötige:
1. Wenn ich einen Ordner mit sehr vielen Unterordnern und verschiedenen Inhalten einfüge möchte ich eigentlich nur die PDFs verarbeiten. Leider fügt Acrobat auch alle JPGs DOCs etc. hinzu. Ich muss also alle unerwünschten Dokumente herausfiltern, da auch keine sortierung vorhanden ist. Bei mehreren Tausend Dokumenten nicht leistbar. Gibt es hier eine Möglichkeit nur PDFs in die Stapelverabeitung aufzunehmen?
2. Sollte die Verarbeitung mal laufen kommt es hin und wieder vor das die PDFs durch einen Benutzer geöffnet sind. Ich bekommen hier eine Meldung von Acrobat die ich erst bestätigen muss bevor es weiter geht. Da das Programm eigentlich über mehrer Tage/Wochen im Hintergrund laufen soll passt mir das gar nicht wenn ich alle Stunde überprüfen muss ob die Stapelverabeitung noch läuft.
Ich hoffe es gibt jemanden der mir helfen kann. Ich bin über jede hilfreiche Antwort glücklich.
Gruß

For starters, let's refer to your original post: "this is indeed a serious problem and step back in functionality..." This statement is a quite ridiculous assertion, unnecessarily dramatic, wholly inaccurate, and unhelpful. Your statement "is this a joke" and "I know Acrobat tends to choke...etc..." is just pure gibberish and polemical. It is quite easy to feed any application enough data to cause a performance failure, but one would really need to question one's motive and prudent use of one's time at this point - unless you are tasked with stress and load testing the software to determine minimum working requirements.
'Batch Processing' is, since Acrobat 9.x, dead and gone, Acrobat 11's approach is to aggregate many hitherto unavailable tools and commands and allow the user to create custom workflows. More interactivity has been built into the process, which may or may not be desirable in each case depending on the workflow context and requirements. But we have obviously moved away from the concept of processing a large number of files and towards a more targeted and effective processing of smaller sets of files. The default Actions we deliver with Acrobat 11 reflect this intention.
The feature "Batch Processing", which was an Acrobat feature from A5 (I believe) up to A9, previously had been hidden in Menu/Advanced/Document Processing/Batch Processing has been wholly replaced by a completely overhauled framework called Actions, now part of the Tools panel, and will be immediately accessible when Tools is called in the UI.
Thus the obscured Batch Processing may have been a tool considered and used by an extremely small set of users to do exactly that, i.e., batch process a large number of files, but had been fairly inflexible, generally speaking, and buggy. We were very well aware that if we were to overhaul the feature, add a considerably larger number of available tools and commands in Acrobat, provide wide possibilities for customization built towards specific workflows, and bring it to the forefront, we were going to sacrifice some of the aspects of batch processing a large number of files. Not calling it "Batch Processing" anymore - because it isn't - may be an indication of this intention.
Personally I have used and tested Batch Processing periodically during various Acrobat projects, but I don't remember encountering the "Reduce File Size" command - which is a subset of Save and file optimization - to use within a batch sequence. I may be wrong, and your screen shots would be welcome here. In fact go ahead and construct a batch sequence that (1) uses 'Reduce File Size and (2) applies file type filters to it, and post it either here or to me privately. I would be happy to be wrong. But regardless, we are grateful for positive input that points out defects, allows us to improve the functionality of the product, providing the intended changes are reasonable, and that the communication of said issues remain respectful of this process and of the individuals we depend upon to implement these changes. The tone of your response comes very close to rendering a proper consideration of this issue irrelevant.

REDUCE FILE SIZE with Acrobat Pro

Hi everyone!
I created a epk for a rock band with Illustrator then I created one pdf that contains the all three pages with Acrobat Pro (I downloaded the trial because it was just for this occasion) This epk is a pdf file with 3 pages, some pictures and hyperlinks.
I need to send the epk to the band and they want a reduced size one. The original is 8.3 M but obviously it's too big to be sent via email.
I have been trying with the option SAVE AS - REDUCED SIZE PDF but it doesn't work! Still the same size.
I am new to acrobat so maybe I am missing something.
HELP!
Thanks

Hi michelab,
You can also try choosing Save As > Optimized PDF. There are various settings in that dialog box that you can manipulate to bring down the file size. Here's the Help topic on that dialog box, with information about the various settings:http://helpx.adobe.com/acrobat/using/optimizing-pdfs-acrobat-pro.html
Please let us know how it goes.
Best,
Sara

Reducing file sizes with symbols when it's already too late

Is it possible to turn something into a symbol when you have already placed it multiple times on the artboard? I have created very complex artwork that my client is very happy with, but I haven't shown her the file sizes! Ultimately this has to be uploaded to a webpage so it can be downloaded and printed by many people. I think I should have used symbols rather than cutting and pasting bits of art but now it's done and I don't want to redo it if it can be avoided.
Other ways of reducing file sizes would also be helpful.
Thanks for any help!

And what does "downloaded from a website" mean? As PDF? If so, it doesn't matter. You would simply flatten and optimize the PDF. Symbols are AI specific and don't carry over to foreign formats, so it would be wasted effort trying to replace anything. if you still must, try this: http://www.illustrationetc.com/AI_Javascripts/ReplaceScripts.htm
Mylenium

Reduce pdf size for Livescribe files

Does anyone have Livescribe for Mac? I am trying to reduce the pdf size of these files once I convert, and having no luck with ColorSync filters.
Any help would be appreciated!

When you have those scanned documents in the computer, and choose
Print> Save as PDF> what size file(s) are generated at the page level?
This may reduce files size from that of the original scan, since it would be
using a print alternative to 'save as pdf' instead of printing the file. Since
the system's Preview application as well as Adobe Reader can open the
print> save as pdf> files; you can check to see if this makes smaller pdf.
You could also set the defaults so screen-shot captures are .jpg and then
check their per-page file size to compare the difference. Perhaps one of
these methods could result in a way to send a smaller file of the content.
The .jpegs could be combined in a folder to be sent as a .zip attachment.
I've used OnyX to change the default screen capture to jpg from png; so
all screen shots (command shift 4, or 3) will make jpegs automatically.
There used to be some good freeware tools to change .PDFs, but the
ones I'd tried some years ago are either extinct or cost real money...
Good luck & happy computing!

Reducing PDF size (to put online)

Can anyone advise how to make the smallest possible PDF file size, to be added to a website?
I have a 40 page document, originally produced in Quark, then exported as a postscript file, then converted to PDF using Distiller. I have used the PDF optimiser in Acrobat 7.0.9, along with the 'Reduce File Size' option, but have only been able to compress the PDF down to 9.5MB. I'm sure I have seen other multi-page PDFs online at much smaller sizes - how do they do it??
The PDF has to remain compatible with Acrobat 5, could this be the issue? Any ideas gratefully received!
(I am using a 1.8ghz G5, with 1.5GB Ram, incase that helps!)

Like Andrea, I too have a series of largish (about 30 pages each) documents to make into pdfs for putting on a website. I'm getting big file sizes (about 8-10mb), even when I save them as a 'screen' quality pdf. My images are jpgs (none very large) but there are quite a lot of roll-overs (at least 100 per document). I've used InDesign CS to create the files and am currently using Acrobat CS Professional 6. I have optimised them in every way I can think off.
I have been thinking about upgrading to Creative Suite CS3. Does anyone have any idea if there are any features in the latest versions which will help me reduce my file sizes? It could well be the factor that decides it!

Reduce PDF size by flattening InDesign file??

i have a 68 page catalog design in InDesign. i export as PDF/X-1a:2001 for printing. it comes out as 96MB and the printers site wont accept it. so they are telling me to flatten the images and layers in the PDF. I thought that type of PDF already does flatten everything so im not sure what they are talking about. Another project i worked on the transparencys were not coming through right to the printer, they also asked me to flatten the transparencies. but that i did in photoshop before bringing it into InDesign. This catalog file im on now... there are a ton of images and it wont take forever to flatten every image and re-place in InDesign. is there a better option to reduce the PDF size but still keep high quality for print? Thank you.

There are several different, and contradictory, meanings of "flatten" so it's on order to ask exactly what kind of flattening they want and what tools to do it with.
One meaning of "flattening" is to flatten transparency, turning it into images or composite shapes.
Now
1. This sort of flattening almost always makes things bigger, not smaller - if there is transparency in the first place.
2. When you save as PDF/X1-a or PDF/X-3 it will always be flattened; that's the rules.
3. So the choice of PDF/X-1a forces flattening and often makes files much bigger.
Do the printer require PDF/X-1a?

Reducing pdf size - compressing images

I have a word document with a lot of images. the doc has 2.3 mega but the pdf gets around 8.5 mega; I've tried many settings in Adobe PDF but I cannot reduce the pdf size;
thank you

If you are using WORD 2003 or later, you can click on one of the images to get the format menu, select compress in the lower left corner, and compress the graphics in the WORD file. If you want to keep the original, do this on a copy (good idea anyway) and then create the PDF using the Adobe PDF printer. You may be getting the size due to features added by PDF Maker if you are using that.
Within Acrobat, your options are either FILE>Reduce File Size or the PDF Optimizer. You can also just print to a new PDF. A lot depends on how you created the PDF and you provided no info there. Also, what OS and version of Acrobat?

Reducing image size with Preview?

I notice that Preview's "adjust size" option can considerably reduce the size of some images i got from internet. For instance, with a 366 KB JPEG image, after clicking on adjust size, there would be a line at the bottom of the window that says: 101 KB (was 366 KB). And i know this new smaller sized image has the same quality as the original because when i compare both images at maximum zoom, i see no difference in the size, color or position of the pixels. So, does anyone know how this size reduction method can be applied simultaneously to many images or to an entire folder? Or do you know any software (preferably free) that does something similar without quality loss?
Thanks in advance

Then change the subsampling rate or turn it off in the PDF Optimizer. But realize that in doing so you trade the quality for a larger size.

How to reduce pdf file with out losing image quality

I have a few ai files that I converted to PDF files and I need to reduce the size of them without losing quality of image.....I selected document then selected reduce size. This gave me a smaller file but my images were low quality.

That's what it does (secretly) ...
Try the PDF optimiser under Advanced but remember to audit space use
first - this ensures you can attacking the areas which are fat as such ...
Jon

Text displacement in Reduced PDF Size in Adobe Acrobat X

why there's text displacement whenever I reduced file size in Adobe Acrobat X even going from File menu - Save as - Reduced PDF Size

Never seen a displacement. Would it be possible to post screen shots of before and after to point to what you mean.

Reducing PDF size with textfields, checkboxes...

Similar Messages

Maybe you are looking for