Reducing the red render lines?

Every time I move my still image on the timeline it wants to re-render the whole lot.
This is making my workflow very slow.
I apply a few filters and keyframes to it and I think thats why FC wants to completely re-render every time.
Is there a way of getting around the need to re-render the whole time (eg: some kind of low-quality playback or something?)
I know OPTION+P will take you frame by frame without the need to render but it knocks the sound off which is unhelpful for me.
Seems like everything still/video clip that has a filter needs to be re-rendered if it moves a feather anywhere. :s
Help!

No setting within FCP will allow it to take advantage of more than 4GB of RAM. FCP is still a 32bit application and that's the limit (2.5GB for the program and 1.5GB for OSX and frameworks).
If you are looking to optimize FCP, use the extra ram to run Adobe Acrobat and spend some time reading the manual. It is well written and offers a good overview of the system and how to set it up.
Good luck.
x

Similar Messages

Does stabilization work even for the parts with the red squiggly line?

Basically my entire hand held movie shows the red squiggly line after I analyze for stabilization. I drag the clip into my project and the red squiggly line remains. When I double click on the clip in the project, the stabilization box is checked, but there's no place for me to adjust it. Is this image stabilized at all, or am I doing something wrong? I compared it against the unstabilized clip and it basically looks the same. Thanks!

The red squiggly line means that the clip is too shaky for stabilization to help, even with a zoom of 150%. Therefore, the options for controlling the stabilization are greyed out.

How can I reduce the number of lines in live paint?

I'm trying to use adobe illustrator to color the background of a photograph green while keeping the person in the picture the same color.
I used live trace to get a vector image and then attemped to use live pain to finish the job, but I end up with thousands of blue lines and gaps that are too small to color in. Is there anyway i can reduce the number of gaps so that i can actually paint the background?
I've already tried the gap options and adjusting the settings to small medium or large did nothing.
If this isn't possible, is there any other feature in adobe illustrator that would allow me to achieve my goal?
I have a photograph with a person in the middle; i want the person to remain the same and the background to be changed to green.
Thanks for your time.

Would be easiest to fix this when tracing.
You could try the magic wand tool to select them (but you'll have to expand the live paint object)

How do I reduce the space between lines in a JTextComponent?

I've searched pretty thoroughly in this forum and can't find an answer.
My editor displays text fine, but I'm not happy with the space between lines. Is there any way I can reduce the overall height of each line just to close the gap a little?

Okay, I've got it worked out. I reckon it will work for my purposes although I have yet to test it in my app.
The trick is to use a negative value for the StyleConstants.setSpaceAbove(spacing2, -5.0f);The code below shows a comparison between a text pane with default spacing values and a text pane with that -5 space above value.
import java.awt.*;
import javax.swing.*;
import javax.swing.text.*;
public class TestTextPane extends JFrame
public TestTextPane()
super("Text Pane Test: LineSpacing");
JPanel panel = new JPanel();
setContentPane( panel );
JTextPane textPane = new JTextPane();
textPane.setFont( new Font("monospaced", Font.PLAIN, 12) );
textPane.setText( "abcdefghijklmnop\none\ntwo" );
SimpleAttributeSet spacing = new SimpleAttributeSet();
StyleConstants.setLineSpacing(spacing, 0.0f);
StyleConstants.setFirstLineIndent(spacing, 0.0f);
StyleConstants.setSpaceAbove(spacing, 0.0f);
StyleConstants.setSpaceBelow(spacing, 0.0f);
StyleConstants.setUnderline(spacing, false);
StyleConstants.setItalic(spacing, false);
StyleConstants.setBold(spacing, false);
//this line sets the attributes for the text specified by the first two arguments.
textPane.getStyledDocument().setParagraphAttributes(0, textPane.getDocument().getLength(), spacing, true);
JScrollPane scrollPane = new JScrollPane( textPane );
scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
//set up the comparison
JTextPane textPane2 = new JTextPane();
textPane2.setFont( new Font("monospaced", Font.PLAIN, 12) );
textPane2.setText( "abcdefghijklmnop\none\ntwo" );
SimpleAttributeSet spacing2 = new SimpleAttributeSet();
StyleConstants.setLineSpacing(spacing2, 0.0f);
StyleConstants.setFirstLineIndent(spacing2, 0.0f);
StyleConstants.setSpaceAbove(spacing2, -5.0f);
StyleConstants.setSpaceBelow(spacing2, 0.0f);
StyleConstants.setUnderline(spacing2, false);
StyleConstants.setItalic(spacing2, false);
StyleConstants.setBold(spacing2, false);
//this line sets the attributes for the text specified by the first two arguments.
textPane2.getStyledDocument().setParagraphAttributes(0, textPane2.getDocument().getLength(), spacing2, true);
JScrollPane scrollPane2 = new JScrollPane( textPane2 );
scrollPane2.setPreferredSize( new Dimension( 200, 200 ) );
panel.setLayout(new FlowLayout());
panel.add( scrollPane );
panel.add( scrollPane2);
public static void main(String[] args)
TestTextPane frame = new TestTextPane();
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.pack();
frame.setVisible(true);
}

Does acrobat have a function to reduce the size of lines?

using acrobat 5.0, i have some b/w line art and i would like to reduce the thickness of all the lines (i am familiar with increasing line size through the use of the 'stroke' function) but i have been unable to find a way to highlight all lines and then use a function to reduce the width of all lines. is there such a function built in? thank you. dan

No.

How to reduce the length of lines in Smartform windows

Hi,
In smartform Mainwindow or any window, how to draw the vertical lines and horizontal lines and how to reduce the lengths...very urgent please explain.
Thanks and Regards,
surya

Hi Surya,
You should use templates for this purpose.
and if you are in table then you can not use templates. Here you should go for the line type.
and in either case there will be pattern tab in the right side bottom.
if double click on the teplate it will get display.
click on the select pattern and select the required format and give the line width
ex 15 TW
I think this will help you

To reduce the no of lines

is there a way to reduce the below pasted code to few lines. i am checking the string for "and " and "or". there may be possibilities of getting these in different forms like " and ","and "," and" etc.
if(operatorTypeused.toLowerCase().indexOf("and")>=0 || operatorTypeused.toLowerCase().indexOf("or")>=0){
                             if(texttosearch.toLowerCase().indexOf(" and ")>= 0 || texttosearch.toLowerCase().indexOf("and ")>= 0 || texttosearch.toLowerCase().indexOf(" and")>= 0
                                       || texttosearch.toLowerCase().indexOf(" or ")>= 0 || texttosearch.toLowerCase().indexOf("or ")>= 0 || texttosearch.toLowerCase().indexOf(" or")>= 0){
                                   actualtexttosearch = texttosearch.toLowerCase().replaceAll(" and "," ");
                                   actualtexttosearch = actualtexttosearch.replaceAll(" and","");
                                   actualtexttosearch = actualtexttosearch.replaceAll("and ","");
                                   actualtexttosearch = actualtexttosearch.toLowerCase().replaceAll(" or "," ");
                                   actualtexttosearch = actualtexttosearch.replaceAll(" or","");
                                   actualtexttosearch = actualtexttosearch.replaceAll("or ","");
                                      fieldValue = actualtexttosearch;
                              }

I thought we were trying to match the code in the
original post. In it, 'and/or' are only replaced
with the empty string if they have a leading or
trailing space and they are replaced with a single
space if there is both a leading space and atrailing
space.I thought that there was a bug in the original code,
and it looks like it (read the other replies)Reading the OP's responses has made me confused. I now cannot see what he is asking for!

How to remove the red vertical line on your mac

pls help ..,,, how to remove red horizontal line in your macbook pro??

Take your MBP to an Apple store or an AASP for a definitive diagnoses. I suspect you may have a GPU problem.
Ciao.

Query result: reducing the query's line returned

I have the query output below:
SELECT null NRO_NEW, 123 NRO_OLD, 384603 OID_OLD, null OID_NEW FROM DUAL UNION ALL
SELECT null , 0143355014948714, 384611, null FROM DUAL UNION ALL
SELECT null , 0143356000159014, 385305, null FROM DUAL UNION ALL
SELECT 0143356000159014, null, null, 385305 FROM DUAL UNION ALL
SELECT 666 , null, null, 384603 FROM DUAL UNION ALL
SELECT 0143355014948714, null, null, 384611 FROM DUAL;
NRO_NEW         NRO_OLD         OID_OLD OID_NEW
                123             384603
                143355014948714 384611
                143356000159014 385305
143356000159014                         385305
            666                         384603
143355014948714                         384611But I need to reach the result below( to put in the same line the NRO_NEW and NRO_OLD belong of the same OID_OLD and OID_NEW ):
NRO_NEW         NRO_OLD         OID_OLD OID_NEW
            666             123 384603 384603
143355014948714 143355014948714 384611 384611
143356000159014 143356000159014 385305 385305Can anyone help me?
Edited by: user5914526 on Sep 15, 2011 1:30 PM

maybe this will help.
SQL> With t1 as
2 (SELECT null NRO_NEW, 123 NRO_OLD, 384603 OID_OLD, null OID_NEW FROM DUAL UNION ALL
3   SELECT null , 0143355014948714, 384611, null FROM DUAL UNION ALL
4   SELECT null , 0143356000159014, 385305, null FROM DUAL UNION ALL
5   SELECT 0143356000159014, null, null, 385305 FROM DUAL UNION ALL
6   SELECT 666 , null, null, 384603 FROM DUAL UNION ALL
7   SELECT 0143355014948714, null, null, 384611 FROM DUAL),
8    t2 as
9 (SELECT null NRO_NEW, 123 NRO_OLD, 384603 OID_OLD, null OID_NEW FROM DUAL UNION ALL
10   SELECT null , 0143355014948714, 384611, null FROM DUAL UNION ALL
11   SELECT null , 0143356000159014, 385305, null FROM DUAL UNION ALL
12   SELECT 0143356000159014, null, null, 385305 FROM DUAL UNION ALL
13   SELECT 666 , null, null, 384603 FROM DUAL UNION ALL
14   SELECT 0143355014948714, null, null, 384611 FROM DUAL)
15 select t2.nro_new,
16         t1.nro_old,
17         t1.oid_old,
18         t2.oid_new
19    from t1, t2
20   where t1.oid_old = t2.oid_new
21 order by t2.nro_new;
   NRO_NEW         NRO_OLD         OID_OLD    OID_NEW
            666             123     384603     384603
143355014948714 143355014948714     384611     384611
143356000159014 143356000159014     385305     385305
SQL>

Skimming not working, the red line will not follow my mouse anymore, why?

When I try to skim my video to choose what I want to use in my project, it won't skim anymore. The red skim line will not move with my cursor. Did I somehow turn it off? How can I get it to work again? Thanks

Hi Dani, After speaking with a sales representative I have been advised that there are no available ports at my address. I was mostly sure this would be the situation, and this only adds to the frustration of our family. Just because we live in an area considered 'rural' we are treated with terrible access to any kind of fixed line internet connection at all. Is there any way for our family to recieve any kind of compensation for the fact that we cannot be supplied with the same quality and quantity of internet that most other people within a 50km radius of our house, can get? I do not understand why we have to deal with the comparatively tiny data amounts of the mobile broadband modems, and cannot even get a matched data quantity, seeing as we pay much more than the regular household to achieve not even a quarter of the data provided by one of the smallest residential ADSL bundles. I understand that these modems are intended for mobile use and this is why they are priced up, but the modems never leave our address which I'm sure some Telstra employee with access to IP tracking programs can clarify, they are soley for our home internet, and our family is grealty inconvinienced by the lack of ports to our area. Is there any way that we can request a port increase for our exchange, or any similar avenue to even slightly shorten the time our family has to wait for internet so that they can keep up with colleagues and peers in terms of schooling and work? As our location is not on NBN's 3 year plan, which gives us at least 3 more years until we can access high data-limit broadband services, and by then who knows how much more technologically integrated our society will become. Any information as to who we can talk with to try and achieve any kind of comparitvely capable internet services would be greatly appreciated, as would any information about the status of increasing port availability.

Anyone else having plroblems with a red outter line flashing on their screen ramdomly since the latest upadate??

Since Verizon ran an update on my stellar couple days ago,My phone has been a little weird. Now it vibrates every time I get a message or anything for that matter. But the red flashing line around the screen is driving me crazy. Not sure what it is or if there is now something wrong with my phone. Anyone out there having this problem??

Check the development options in the phone settings. The red outline sounds like one of the options for developers was turned on.

Red rendering line in timeline turns green after rendering but then reappears.

I''m a new user of Premiere Elements 10 and relatively new to video editing. My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3. The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it. The project is saved regularly after rendering and everything works normally. No changes are made to any clips and as I stated the render line is green when the project is saved and closed. Any ideas what I might be doing wrong. Thanks in advance.

Thank you for that information. It kills about all of my theories.
Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
Wish that I had more to offer, but good luck,
Hunt

Aspect ratio and render line issue

When I overwrite the video from the source (top left) window to the timeline, it is changing the aspect ratio and a red 'render' line is appearing on the time line.
The video is now zoomed in and pixelated.
I have not had this issue while editing with my other files and the settings seem to be correct. Am I missing something super obvious?

The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5
Look for the NEW ITEM information on page 5

Orange Render Line???

What's the orange render line mean? I recently changed a couple of my settings for a new project and now when a clip needs rendering I see an orange line instead of the usual red one.
Bones

What's the orange render line mean?
It means you can SORT OF play back in real time.
You will see an approximation of the final product.
Option-P plays back the real deal but only as fast as your Mac can handle.
Al

Counting the number of lines for each procedure in a package

Hi,
I would like to write a query on USER_SOURCE that can display the number of code lines for each procedure/function in a package.
Is it possible to write such a query? Maybe by using analytical functions?
for example in the following example i would like to count the lines between "PROCEDURE proc1 IS" and "END proc1;" and between "PROCEDURE proc2 IS" and "END proc2;"
SQL> select text from user_source where name='PKG_TEST' and type='PACKAGE BODY';
TEXT
PACKAGE BODY PKG_TEST IS
PROCEDURE proc1 IS
BEGIN
    update t1 set EDITION_NAME = 'AAAAAAA';
    commit;
END proc1;
PROCEDURE proc2 IS
BEGIN
   update t1 set EDITION_NAME = 'AAAAAAA';
    commit;
END proc2;
END PKG_TEST;thanks for helping

onedbguru wrote:
Hopefully some idiot manager isn't trying to use this sort of thing to base their decisions on developer productivity. If so, they ARE idiots. Number of code lines NEVER, EVER, EVER!!! translates into an efficient application. If I were paid by the line, my code would look like:
select
1
from
dual
Based on the idiocy of this method of determining "performance" I would get paid $5.00 at $1.00/line. And trust me, I saw this back in the 80's and 90's and saw similar idiotic code and had to clean up the mess. Most of it wasn't efficient code to start with let alone the number of lines generated.Or the other extreme, when the PHB firmly believed that execution efficiency was gained by reducing the number of lines of code. So instead of nicely formatted, easy to read code:
      *GET NEXT ORDER NUMBER
            EXEC SQL
                 SELECT (MAX(ORDER_NUM) + 1)
                 INTO   :NEXT-NUM:IND-NULL
                 FROM   PART_ORDER
            END-EXEC.
            IF IND-NULL < 0
              MOVE 1 TO NEXT-NUM.
            EXEC SQL
                 INSERT
                 INTO    PART_ORDER
                        (ORDER_NUM,
                         ORIGIN_LOC,
                         ORDER_TYPE,
                         ORDER_STAT,
                         CREAT_TIME)
                 VALUES (:NEXT-NUM,
                         :LOC, 'R', 'O',
                         CURRENT TIMESTAMP)
               END-EXEC.
            MOVE NEXT-NUM TO MASK0.
            PERFORM HEADER-PROC THRU HEADER-EXIT.
        CREATE-ORDER-EXIT. EXIT.                                                     You got this:
       *GET NEXT ORDER NUMBER
        EXEC SQL SELECT (MAX(ORDER_NUM) + 1) INTO :NEXT-NUM:IND-NULL FROM
        PART_ORDER END-EXEC. IF IND-NULL < 0 MOVE 1 TO NEXT-NUM. EXEC SQL INSERT
        INTO PART_ORDER (ORDER_NUM, ORIGIN_LOC, ORDER_TYPE, ORDER_STAT,
        CREAT_TIME) VALUES (:NEXT-NUM, :LOC, 'R', 'O', CURRENT TIMESTAMP)
        END-EXEC. MOVE NEXT-NUM TO MASK0. PERFORM HEADER-PROC THRU HEADER-EXIT.
        CREATE-ORDER-EXIT. EXIT.                 Oh, wait! See the same thing all the time in this forum ... not because someone thinks fewer lines = faster code, but simply because people are sloppy.
INSERT INTO PART_ORDER(ORDER_NUM,ORIGIN_LOC,ORDER_TYPE,ORDER_STAT,CREAT_TIME) VALUES (:NEXT-NUM,:LOC, 'R', 'O',CURRENT TIMESTAMP) ;

Reducing the red render lines?

Similar Messages

Maybe you are looking for