Reducing your implementation time with Configuration Express Wizard

Dear B1 community,
recently a new tool has been published on the SDN which may help you to reduce the implementation time of SAP Business One 2005 A SP01.
It is provided as a non-supported version and you can download it here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0033074f-9958-2a10-9cb0-ad9f75622b40.
The package contains: The Configuration Express Wizard, a presentation explaining how to use the tool, and two webex sessions for more details.
Try it - we are curious on your feedback.
Regards,
Markus

Hi guys
I've tried all links given here, but none of them are working properly. I've tried saving and opening, but either way I got a corrupted file.
Is there any other way I can download it?
I actually have CEW, but I think it is the old version, so I'm getting the following message:
Wrong digital signature for add-on installer
I supposed that the new version would fix this, according to this post:
Reducing your implementation time with Configuration Express Wizard
Can anyone help? I really needed this to do a presentation on thursday!
Thanks!!

Similar Messages

Solution Packager vs Configuration Express Wizard

Can anyone explain the difference between these two tools, and point me in the right direction to find them?
Thanks

It doesn't appear to be true, no.
The Configuration Express Wizard was / is a tool downloadable from the SDN, where the Solution Packager is provided by SAP with the installer packages.
This would indicate they are different tools.
I am trying to work out what the practical applications of these might be

Configuration Express Wizard CEW

Hi All,
Anybody using Configuration Express Wizard with SAP Business One 2007 A/B ?
From where we can download it ?
Does it work with all version and all latest patch levels?
Best Regards,
Samir Gandhi

hi samir,
Trial version is available for free download in SDN itself.
Check this link in SAP B1 Downloads
https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/0033074f-9958-2a10-9cb0-ad9f75622b40
But i' don't know whether this tool can be used for 2007 version.
also check this link
https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000102632008E
Edited by: Jeyakanthan A on Jun 19, 2009 5:23 PM

Configuration Express Wizard for sbo

Hi Dear;
i have SBOA PL39
when i try to install the Configuration Express Wizard for sbo add-on i have the following error message:
Wrong digital signature for add-on installer.
could you help me please?
thank you Dear;

HOW TO INSTALLED THE CONFIGURATION EXPRESS IN MY SYTEM .I JUST FINISHED MY B1 FUNCHIONAL .PLEASE HELP ME THIS QUSTION .
could you help me please?
thank you,
Regards,
Jeral

How Can I reduce Query Execution time with use of filter

Dear Experts,
In a query execution is faster when there is no product filter and these products can be a list contaning mare than 300 items.
I am using In operator for that filter.

Maybe if you posted the quer[y][ies] we could get a better idea.

Best configuration to extend wifi with Time Capsule & Airport Express

In my house I have a Fritzbox wifi router on the ground floor as my primary internet access. I have an ethernet cable going to the 3rd floor study where the Fritzbox signal is relatively weak. I purchased a Time Capsule as a backup device, but also wanted to extend the Fritzbox wifi network by plugging the ethernet cable in to the TC. I was not successful in extending the network, so I had to create a new network. When moving from downstairs to upstairs, my iphone keeps the connection to the (now weak) wifi network and I have to manually change to the (stronger) TC wifi network.
Additionally, I used to be able to successfully extend the downstairs wifi using my Airport Express (and also managed to have my speakers plugged into this for wireless usage), but do not want to additionally complicate my set-up.
So, what is the best way to connect the following equipment, ideally with the same network name, to ensure I always use the strongrst signal automatically:
Third floor:          iMac,    Macbook,   Time Capsule, Airport Express
          Ethernet cable from ground floor to 3rd floor
Ground floor:     Fritzbox wifi connected to internet

You must configure the Bridge Mode setting as the very last step before you Update the settings, otherwise the setting will change automatically.
In other words, you can change the setting to Bridge Mode, but if you make any other changes before you click Update, the Bridge Mode setting will not take effect.
Or, if you see any error messages about DHCP conflicts or Double NAT....the AirPort is not in Bridge Mode...even though you might think it is. Check the settings again.
will I still be able to set up an additional 5GHz network in parallel?
Yes

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

How to extend wireless with airport express and time capsule

So, I have a time capsule & because of the thick walls in my apartment, I can barely use my ipad and iphone at night in my bedroom! (my macbookPRO stays at 3 bars however!)
I bought an airport express thinking I could plug it closer to or inside my bedroom to boost the signal - but it doesn't seem to work that way - any tips on how to set this up?
TWO ADDITIONAL Qs:
Does connecting directly to my time capsule (which i'm assuming i'd need another ethernet cable) help with the boost? (then negates the other great uses for the airport express it seems)
Isn't there a way to do the boost with the express wirelessly? I'd really love to get wireless speakers, use airplay AND be able to use my devices just two rooms away .... HELP!
thanks so much (when did apple phone support start to be closed on Sundays?)
cheers.

Suggest that you check your setup again to make sure that the settings are correct on both the Time Capsule and AirPort Express.
Open AirPort Utility, select the Time Capsule and click Manual Setup
Click the Wireless tab below the row of icons
Make sure that a check mark is entered next to "Allow this network to be extended".( If the box is not checked, the Time Capsule will not extend to the AirPort Express)
Click Update to save your settings and close AirPort Utility
Next, open AirPort Utility again, select the AirPort Express and click Manual Setup
Click the Wireless tab
Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark entered next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule network
Confirm Password
Update to save settings and close AirPort Utility
Locate the AirPort Express approximately half way between the Time Capsule and area that needs more wireless coverage. You may need to experiment on placement to find the best compomise.
Post back on your results.

Time Capsule as bridge, want to extend range with airport express

I have a Motorola Surfboard SBG6580 a time capsule (3rd gen) and an airport express (2nd gen). I currently have the time capsule connected to the surfboard router by ethernet and have it iset to bridge mode. i would like to use the airport express to extend the network because as i get to the back of my apartment the range of the wifi signal starts to degrade. however when i try to extend the network with the express i am unable to.
both apple routers are on latest firmware
would there be any alternative way to configure these 3 devices for best performance / range

@blaqink
Have you figured this out?
I am looking to accomplish the similar feat. I have the Motorola Surfboard SBG6580, Time Capsule (Gen2) and Airport Express. I would like to use the Motorola as the main wireless signal because it appears to be better. But I still use the TC for backups and time machine, then I use the AX to extend the signal.
So, how can I use these 3 in unison? TC connected via ethernet to Motorola and set in bridge mode? Then extend the AX signal? Any detail setup info you can provide will help..thanks!

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

Open the file in QuickTime Player. Then do Tools > Show Movie Inspector. What does it say for Format and FPS?
At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec. If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first. Your clips have to match the properties of the Easy Setup you are using.
If it's neither DV or AIC then you need to convert it to one of those codecs. (QuickTime/DV or QuickTime/AIC) Many people in this forum rely on MPEG Streamclip (it's free and works great).

I have installed hydra express plugin for Aperture many time with no success

I have installed hydra express plugin for Aperture many time with no success. When I select edit with plugin hydra, the make an HDR image with hydra appears. When I hit the process button a message states that hydra is not found. I have checked in my application support folder. There is no plugin folder for aperture or a hydra plugin.
Any help would be appreciated.

Plug-ins get installed in one of two locations.
~/Library/Application Support/Aperture/Plug-Ins/Edit
or
/Library/Application Support/Aperture/Plug-Ins/Edit
The second is for all users of the machine and is located in the root folder of your system drive (often "Macintosh HD").
The first is your private library (note the ~ symbol which a shortcut to your user folder) and means the plugin is just for you. ~/Library is hidden by default so finder wont see it. To see it in Finder, use the menu "Go->Go to folder" and type in ~/Library as the folder name. Then you can natigate to /Application Support/ etc....
That should help you determine if it's installed. Note, you may only find an alias in the plug-in folder and the programs may actually be stored elsewhere. Also, if the Plugin can be used for export as well as edit, it might be located in /Plug-Ins rather than /Plug-Ins/Edit
In terms of why it isn't working, I think I may have a clue to what's going on. Sometimes plugins use utilitly shell commands that get distributed with the plugin. These can get quarantined by Macs Gatekeep security because they are not signed by a 'valid' developer.
I've recently taken on the task of making the old Enfuse plugin compatible with the latest version of Aperture, and ran into this gatekeep quarantine issue. I got around it by de-quarantine the required commands and got the plugin working.
For distribution, I've put an AppleScript together which installs the plugin and takes care of the quarantine issue, but I am just (literally today) tesing that on a different machine to make sure it works the same as it does on mine.
If you can first confirm that hydra is installed in one of the above locations, I'll then talk you through how to check if there is a quarantine issue with it.
-Andy

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Reducing your implementation time with Configuration Express Wizard

Similar Messages

Maybe you are looking for