Redundancy from ibm os/390 tcpip to dual routers

I have 2 routers that have single escon connections to the same mainframe tcpip stack (os/390 2.9). What is the best way to provide failover from mainframe should one router fail. this involves mainly ibm tcpip configuration and would prefer to do without routing on mainframe and have to pass routing updates between mainframe and routers. Has anybody set up this scenario?

Have you looked at using VIPA .
http://www.cisco.com/univercd/cc/td/doc/product/software/ioss390/ios390cg/cgfault.htm

Similar Messages

IBM ThinkPad 390 2626 HDD volume limit

What is maximum HDD capacity for IBM ThinkPad 390 2626? Can I use 30 GB Toshiba MK3021GAS HDD with my 390?

Welcome to the forum!
Yes, you can use a 30GB drive, as long as it's PATA/IDE and laptop size.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Translation library for Oracle 8.1.6 on IBM oS/390

Has anyoune an idea about the translation library for accessing through ODBC an Oracle 8.1.6 installed on IBM OS/390?
The same driver works fine on Oracle 8.1.7 on Sun Solaris, but when I access the OS/390 Oracle I find "strange" character, certainly due to the EBCDIC-ASCII translation.
What have I to give as "translation library" and "translation option" in the driver configuration?
TIA
Sergio Barbieri

Hi Gitesh,
I face exactly the same problems as you face....
no whatsoever difference...and i am completely stuck as i dont
know what to do...
i have heard from some people (on the oracle discussion groups)
that they have successfully installed oracle8.1.6
how i dont know... but very much eager if any of you all could
help me out.
if you do find a way out and solve the problem ...do plz. let me
know....
akshay.

Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2G

Dear ALL<
We have a requirement for Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2g. Can you guys please share your experiences with similar activities done in the past ? We do not have environment at present to try out with Oracle Migration workbench.
http://www.oracle.com/technetwork/topics/index-095746.html
You experiece sharing will really help ...!!
Regards,
VKMP
Edited by: 909016 on Jan 31, 2013 5:52 AM

Hi VKMP,
As well as reading the documentation thoroughly the following note available in My Oracle Support may be useful -
Problem To Migrate Table With Table Type P From DB/AS400 With OMWB (Doc ID 466271.1)
as OMWB does not support migrating physical files.
Regards,
Mike

I am switching from IBM to Apple

I am switching form IBM to Apple. How do I get my Photoshop and Lightroom to work?

Paul Dandini wrote:
I am switching from IBM to Apple…
Hehehe… It had been many moons since I'd seen or heard anyone refer to the PC world as "IBM".
Nice to see some folks still remember…

Oracle Apps 11i(11.5.10.2) migration from IBM AIX 5.3 to 6.1 (64-bit)

Hi,
Is there any additional steps required after migrating Oracle Apps 11i(11.5.10.2) from IBM AIX 5.3 to 6.1?
Regards,
Kiran

Is there any additional steps required after migrating Oracle Apps 11i(11.5.10.2) from IBM AIX 5.3 to 6.1? Are you cloning or upgrading the OS?
If you want to upgrade the OS, then you need to make sure you install all OS pre-req software and packages aftet the upgrade and relink executable files.
How to relink an Applications Installation of Release 11i and Release 12 [ID 356878.1]
Recommendations To Install Oracle Applications 11i [ID 294932.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
If you want to clone, then make sure you have all OS pre-req. software and packages installed and use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Thanks,
Hussein

Conversion from IBM BookMaster to Pages

I would like to convert several large documents from IBM BookMaster (Script VS) to Pages '09. Currently, source is in z/VM ASCII and marked-up with GML.
I wrote some utilities to do the general tag-removal work and the samples look fine when imported to Pages. There are two functions which I am unable to replicate and was wondering whether anyone could suggest a technique to achieve the results in Pages.
Firstly, self-incrementing variables; an element which displays a number and increments in value with each occurrence.
Secondly, internal page-number reference links; ... see section +name from link+ on page +linked value+ for details...
Any help with these items and general U/E with the conversion process would be greatly appreciated.
Message was edited by: Mason Love

I would like to convert several large documents from IBM BookMaster (Script VS) to Pages '09. Currently, source is in z/VM ASCII and marked-up with GML.
I wouldn't know how to convert from IBM AFP Advanced Function Presentation as page description language to PCL, PS, PDF or XPS. With regard to converting from IBM GML (which I take it stands for Graphics Markup Language, as an SGML implementation), your best bet may be to map your markup from IBM GML to ISO OOXML. Adobe XMP Extensible Markup Platform should be in the initial stages of an international standard. In reality, relatively lossless repurposing revolves around three dimensions of unification: unification of the character information (ISO-IEC 10646), unification of the colour information (ISO 15076) and unification of the content information (structure information). It's a bit of a jungle, though .
/hh

Attachments of files from IBM Lotus

When an email is received in the CRM system with attachments of files from IBM Lotus (version 8), the attachments cannot be opened in the CRM system (version 7.0).
In inbox mail there is a icon of the attached file.
If to open link u201Ctransfer to crmu201D the letter of the attached file isn't present.

Hi,
Please help to try steps in note 1247072 if it has not been implemented yet.
Hongyan

Migrate database from IBM DB2 to ORACLE

Hi oracle professionals,
Currently database resides in IBM DB2...
We need to migrate Database to oracle ...
Thanks in advance
Pawan

Hi,
Kindly refer
Oracle SQL*Developer - which is free to use and download -
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Oracle Database Migration Technology -
http://www.oracle.com/technetwork/database/migration/index-084442.html
Migrating from IBM DB2 LUW to Oracle -
http://www.oracle.com/technetwork/database/migration/db2-084087.html
IBM DB2/400 V4R3 & V4R5 can be migrated using the original Migration Workbench v10.1.0.4 available from here -
http://www.oracle.com/technetwork/topics/index-095746.html
Also article
Migrating From IBM DB2 UDB to Oracle (Doc ID 1148493.1)
Thanks,
Krishna

Reg: Upload an image from IBM File Net into SAP ZTABLE .

HI,
I have a requiremnt to Upload an image from IBM File into SAP ZTABLE .
or
can anyone give me an idea on
How to Upload an image from any image software into SAP ZTABLE .
Thnaks,
Arjun
Edited by: Arjun on Jan 22, 2010 2:24 PM

hI,
I've found the solution!!
My code was wrong, the correct way is:
DATA: image type XSTRING,
            imagelength type i.
DATA: it_img TYPE w3mimetabtype.
CALL FUNCTION 'SSFC_BASE64_DECODE'
   EXPORTING
     b64data = output-CONVERT_FROM_URL_RESULT
   IMPORTING
     bindata = image
   EXCEPTIONS
     OTHERS = 8.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
   EXPORTING
     buffer                = image
     "APPEND_TO_TABLE       = ' '
   IMPORTING
     OUTPUT_LENGTH         = imagelength
   tables
     binary_tab            = it_img.

Migrating from IBM-Hyperion solution to Hyperion solution

Hi, in our production system there is IBM-Hyperion solution, but we need to migrate to Hyperion only solution, because IBM has decided that will no more support IBM-Hyperion solution. But looking to web page <a target=_blank class=ftalternatingbarlinklarge href="http://dev.hyperion.com/products/">http://dev.hyperion.com/products/</a> I am little of confused there are two lines of products: "Hyperion System 9 Products" and "Other Available Products". What should be appropriate migration path? Should we migrate to "other available products" list or to "Hyperion System 9"? What is the main difference between theres two? My production system: - Intel server (2 CPU using hyperthreating technology - so Windows see 4 CPUs) - Windows 2003 - Analytic server (Essbase) 7.1.0 (this is equal to IBM DB2 OLAP Server 8.2) - Analyzer server 7.0.19.01830 (this is equal to IBM DB2 OLAP Analyzer server 8.1) - DB2 for Windows v8.2 (database server) - Java JRE 1.3.1_09 on clients computers Thanks, Grofaty

Hello grofaty, please find my answers below your questions: "is there possible to migrate from IBM to Hyperion to both lines of products 7 and system 9?" - You have to check the hyperion website to exactly know which IBM version and therin the Hyperion version can be migrated to the official Hyperion version. They always told us that the IBM version is very similar to the Hyperion version but in one case Hyperion was not able to reproduce our Analyzer problem because they hadn't had the IBM code in their support laboratory. Therefore it makes sense to bind Hyperion over to make a proof of concept for the migration. (E.g. we had problems with rule-files' language setting on WAS, we migrated them via Tomcat on a notebook to WAS on our test system!). "Is there a migration process between 7 and system 9 in "Essabse server" and "Analyzer server"?" - If you like we can exchange our experience which is a collection of consulting know-how and our own experience. "Why does Hyperion sells two products lines (system 9 and 'other available products'? Are there huge differences? Can this products be easy of migrating from one to another?" -As far as I know/read there are differences in the license model because system 9 is rebundled in comparison with 7 and you buy more products than in 7 = ergo the price is higher! You can first buy named licenses for e.g Essbase 7 and then buy an upgrade to Essbase System 9 (e.g in system 9 Essbase is split into ASO and BSO products!!!) ...ask your sales rep. from Hyperion and compare with other companies about special agreements to have a better bargaining position. bye knightrich

Verizon is blocking emails coming from IBM

Hello,
I am a production support manager and recently have been notified by end users that they are not receiving emails coming from IBM to their verizon.net email accounts. Can someone help me with this as we now have possible 1000 users that have not recieved emails to start their new jobs.
Thanks,
{edited for privacy}
IBM
2xrecruitmail.kenexa.com and it has an IP of 66.77.22.217

Just a friendly reminder, this is a forum where users help other users. Please visit our Support page for a variety of ways to contact Verizon, including “Ask Verizon,” our virtual chat agent, and customer support phone numbers.

JCOP from IBM

Does anybody have any information or hands-on experience regarding JCOP cards from IBM. I've read the document provided by IBM that they are suppose to have "native-like" performance, etc. What differs those cards from normal Java Cards from Schlumberger, Oberthur or Gemplus. Are there any compability issues?
Best regards
Jonas

THere are a few vendors, like Gemplus that use the
JCOP mask. Ask your implementor if they use the JCOP
mask. Most of vendors don't like to reveal that
information.
Because JCOP is native, there aren't any compatibility
issues because you can't call native methods with Java
Card. Your applet is a W.O.R.A.. I can take the
samples from the Sun Java Card kit and load on various
cards with minor issue. Those issues are the tools
used to load are different but there aren't any
changes to the code. Thanks for the reply. The reason I asked is that I read some information regarding the card on IBM's website, and they are saying that the performance of an applet running on a JCOP card is much better than on a 'normal' Java Card. They describe the performance of the applet as 'native-like'. That's why I wondered if the JCOP card differ from other 'normal' Java Cards when it comes to compatibility issues, etc, but I guess that is not the case then.
What do you mean by 'you can't call native methods with Java Card'? Do you mean that time consuming functions such as cryptography, etc is not done native on the card?

Spatial support on IBM OS/390

Does Oracle Spatial work on IBM OS/390?
Which platforms does Oracle Spatial currently support?
Thanks!

Hi,
All platforms that support enterprise edition include Oracle Spatial.
I believe OS/390 is included in the list, but you might want to check with a qualified sales rep...
dan

Migration Schema from IBM db2 to Oracle Database

Hi friends,
I want to migrate one schema data from ibm db2 9.1 to oracle 11g.
I tried this in windows machine using ibm control center and its working fine.
Now i want to do the same in IBM machinne.(OPERATING SYSTEM- "Z-OS"). So there is no graphical utility. I heared that using "CLP" tool, I can able to export the schema.
I dont the command to export a schema. Please help me to export a schema from IBM DB2.
Thanks in Advance.

Hi friends,
I want to migrate one schema data from ibm db2 9.1 to oracle 11g.
I tried this in windows machine using ibm control center and its working fine.
Now i want to do the same in IBM machinne.(OPERATING SYSTEM- "Z-OS"). So there is no graphical utility. I heared that using "CLP" tool, I can able to export the schema.
I dont the command to export a schema. Please help me to export a schema from IBM DB2.
Thanks in Advance.

Redundancy from ibm os/390 tcpip to dual routers

Similar Messages

Maybe you are looking for