Redundant Binary Upload Error

I was uploading my app to Apple then the connection timed out and it didn't finish the upload. I tried reuploading several times, but keep getting this error. How can I get past this? If I need to generate a new build, how far back in the process must I go so the build gets assigned a new build version? Do I need new certificates?

Thank Neil! I pressed a red circle with a minus button next to the build to delete it and it disappears. But when I try to upload again via the Application Loader, it says there is a "Redundant Binary Upload." And when I click the plus button in iTunes Connect, the build is still there in the pop-up as pictured above.
I think Apple keeps the build indefinitely and they force you to generate a new build. Is this possible?
If I do need to create a new build (just so it's assigned a new build number), how far back in the process do I need to go? In other words, at what point in creating the app is the build number assigned. Is it part of the certificates or profiles? Do I need to create new certificates and profiles? Or just recreate the app in App Builder?
If I do need to recreate the app in App Builder, I'd need to reset the Single user App number again as I tried to create a new build and it wouldn't accept the number since I already used it.
Is there a way to manually change the Build number so it doesn't conflict with what's already been partially uploaded?
If all else fails, can I download the trial version of InDesign CC and export the app from there since there is no limit on the number of apps you can export?
Thanks again Neil for all your help in the forums! If you're ever down in Miami, Florida, beer's on me!

Similar Messages

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".
I need to change the build number, but not the version number. So I can upload a new build for same version to ITC. What step should I do in FB4.7?

Hi mobisa,
Can you try the solution in this post? ios - ERROR ITMS-9000: "Redundant Binary Upload. There already exists a binary upload with build version '1.0' for train…
Thanks,
Preran

Probleme beim upload der neuen App Version: "Redundant Binary Upload "

Ich habe versucht die neue Version meiner App hochzuladen und ich bekomme immer wieder folgende Fehlermeldung.
Redundant Binary Upload - There already exists a binary upload with build version '32.0.3.51.99524' for train '1.0.50'
Ich verstehe allerdings nicht warum und wie ich dieses Problem beheben kann.

Thank Neil! I pressed a red circle with a minus button next to the build to delete it and it disappears. But when I try to upload again via the Application Loader, it says there is a "Redundant Binary Upload." And when I click the plus button in iTunes Connect, the build is still there in the pop-up as pictured above.
I think Apple keeps the build indefinitely and they force you to generate a new build. Is this possible?
If I do need to create a new build (just so it's assigned a new build number), how far back in the process do I need to go? In other words, at what point in creating the app is the build number assigned. Is it part of the certificates or profiles? Do I need to create new certificates and profiles? Or just recreate the app in App Builder?
If I do need to recreate the app in App Builder, I'd need to reset the Single user App number again as I tried to create a new build and it wouldn't accept the number since I already used it.
Is there a way to manually change the Build number so it doesn't conflict with what's already been partially uploaded?
If all else fails, can I download the trial version of InDesign CC and export the app from there since there is no limit on the number of apps you can export?
Thanks again Neil for all your help in the forums! If you're ever down in Miami, Florida, beer's on me!

ITunes Connect Binary Upload Error

I recently got into the iPhone Developer Program. I tried uploading the binary for my app several times, but I got a message saying: "The binary you uploaded was invalid. It did not contain a .app bundle." A lot of research said that I'm supposed to upload the app folder > build > distribution-iphoneos.zip file, but I don't have a distribution-iphoneos folder to compress. Any help?

Go to the Dev Center and use the link, top right to enter the Portal.
Once there, use the link top right to download the Program Portal User Guide.
Search that pdf for: distribution
Take that document seriously and don't skip around, etc.
You'll have a distribution-iphoneos folder if you built properly in the correct (default) location.
*But you don't compress the folder, you compress the binary...*
(3.2.2 Xcode actually has a 'build and archive' menu choice, but that is for beta work at this time...)

SRW248G4P - (!)Loader Binary checksum error - ERR Runtime Loading Fail - System Halt.

We have this 48 port switch in our engineering department, and it basically stopped passing network traffic.
When connecting to the Console port and power cycling the switch, this is what I see:
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
(!)Loader Binary checksum error
<ERR> Runtime Loading Fail - System Halt.
This error obviously doesn't look "normal".
When pressing CTRL-U, I get the following screen:
File Name                         S/Up Type Size       Create Time
$logfile_1                          0    3         64 1193046:28:15
Factory_Default_Config.cfg          0    5        354 24:01:02
SRW224G4P_SRW248G4P_boot.bix        1    1    1377600 00:01:03
certificate                         0    8      18040 24:00:56
startup-config                      1    5       5651 25:00:38
startup1.cfg                        0    5       5537 24:01:14
Free Space : 5636096
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
I've tried to update the "SRW224G4P_SRW248G4P_image_v1310.bix" file using Xmodem download, but since I really wasn't sure how to use this boot loader tool, I haven't been successful at doing that, nor do I even know if that's the solution for the problem that I'm having.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 7289
Bytes Received = 394480
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1310.bix
Updating file system.
File system update fail.
I'm guessing that I'll need to contact Cisco tech support, although at least through their web site, they make that nearly impossible to accomplish.
Does anyone have any suggestions on what may have happened to our switch and what I should do to recover? Of course we're about to start a time-critical round of product testing, and without this switch, I'm dead in the water. And it's not like we have a spare 48-port PoE switch lying around.

Hello,
I got the same issue. After downloading and uploading the firmware, I got the following result and all LED on the switch are glowing. Could you please help on this issue? Where can I find the right firmware. I also have Image loader 1.0.1.
Xmodem Receiving Start ::
XMODEM, Successful.
Blocks Received = 6b59
Bytes Received = 35ac80
Errors:
        Checksum   = 0
        Complement = 0
        Duplicates = 0
Image downloaded to buffer.
        [R]untime
        [D]iagnostic
        M[u]ltipe Image
        [L]oader (Warning: Are you sure what you are doing?)
        [Q]uit
Update Image File:r
Runtime Image Filename : SRW224G4P_SRW248G4P_image_v1020.bix
Updating file system.
File system update fail.
File Name                         S/Up Type Size       Create Time
All I got now after restarting the switch is:
File Name                         S/Up Type Size       Create Time
Factory_Default_Config.cfg          1    5        354 24:01:02
certificate                         0    8      18040 24:00:56
Free Space : 7602176
[X]modem Download [D]elete File [S]et Startup File
[Q]uit
Select>
Thnx in advance.

Upload Error message: HTTPS protocol is not supported

Hi,
   Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
   Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
     How to resolve this?
Thanks
Sumathi

Hi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev

Image / file upload error cannot upload image even after setting write permissions

Hi there everyone
I am having this problem when I try to upload a file (image file) to my server
I have a dynamic for working fine , all the other fields insert the information ok then I try to add an image upload behaviour to a file field
When I try to upload the file I get this error
Error:
An error occurred while inserting the records.
File upload error: File upload error. Error creating folder..
File upload error. Internal error.
Developer Details:
tNG_multipleInsert error.
An error occurred while inserting the records. (MINS_ERROR)
File upload error: PHP_UPLOAD_FOLDER_ERROR
File Upload Error. No write permissions in "../../productimages/" folder.
(FILE_UPLOAD_ERROR)
So I login to my server and change the write permissions to 777 and then try again and get the same message
I have closed DW and tried again and still get the same message......
I think I have followed all the steps correctly..... I have done the same type of forms many time and tested them locally on WAMP testing server and all work ok......
So..... Anyone got any ideas
Any help would be great
Have a nice day

On 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ?

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

ITunes Producer ePub Upload Error ERROR ITMS-9000

This is the iTunes Producer ePub Upload Error:
ERROR ITMS-9000: "Unable to unzip input: null" at Book (MZItmspBookPackage)
How do I fix this?

Hi. Me too, I have the same problem. Did you solve it?
The epub is validate with epubcheck, it is also possible to read it with iPad, watching regularly the videos, but apple store doesn't approve it.
Is there anybody who can help?
Thanks

Upload Error: Missing Application Descriptor File

Hi,
I keep getting an error when trying to upload my AIR 2.5 app, specifically, "missing application descriptor file". I've double checked the proper XML format for 2.5, as well as checking its location by changing AIR extension to ZIP, etc. The application.xml file is in the proper format and location.
Any clues as to why this upload error is occurring?
Thanks.

Hello,
When uploading an application, the validation looks for the file "META-INF/AIR/application.xml". Is this where your application descriptor resides?
If your problem persists, we can help troubleshoot if you provide us with your AIR application.
Thanks,
Christine

"The Agent of this Target is Unreachable" & EMD Upload Error

Hi There,
I've been working on this problem for three days now and I'm stuck! Ok so here's the issues:
I am monitoring two SQL Server via Enterprise Manager (Oracle Grid). Both worked for months, however, once the server that the SQL Servers were installed on was reboot they both were showing up "The Agent of this Target is Unreachable" in the Grid console. However, after I started and stopped the agent on the development SQL Server server it showed up in the GRID. However, the pre-production does still not show up after I start and stopped the agent on the pre-production server. When I tried to upload the agent on the pre-production server it gives the following error:
EMD Upload Error: Upload was successful but the collection is disabled - disk full
I deleted the access_log files and I don't see a space problem. I secured the agent. I resysnced the agent ....
FYI the Grid is on a unix machine and the SQL servers are on a windows server.
Please help!
J

I am monitoring two SQL Server via Enterprise Manager as in Microsoft's SQL Server?

Upload Error when trying to send large files with Adobe Send

I am a paid subscriber of Adobe Send and should be able to send up to 2GB of files. I am not able to send even 1GB. I have compressed all files into a .zip folder.
I then tried splitting the files into 2 separate .zip folders at about 500MB each, and still got the upload error again after waiting for the entire file to upload. A lot of wasted time now.
It's not reasonable for me to send all of the files piecemeal to my client.
What is going on?
Thank You!
Dave

Here are some screenshots:

EMD upload error

Hello all,
I don't have an Enterprise Manager GRID CONTROL, but the Enterprise Manager which comes up with the Oracle Database 11g.
My problem is that when i sign in on Enterprise Manager page ( https://localhost:5500/em/console/logon/logon ), i don't see that green up arrow that status is UP (and also those charts), but status: Agent unreachable: http://imageshack.us/photo/my-images/846/21442127.jpg/
I tried to do what is specified in the Metalink(also here: http://blog.contractoracle.com/2009/05/emd-upload-error-upload-was-successful.html ), but the problem persists. And that metalink note (317242.1) applies to EM Grid Control. So i don't have a Grid Control.
I tried to stop dbconsole, then start it and then start upload agent ( emctl upload agent), but i got:
C:\Documents and Settings\Sorin>emctl upload agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
EMD upload error: Upload was successful but collections currently disabled - disk fullThe agent status is:
C:\Documents and Settings\Sorin>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent Version     : 10.2.0.4.2
OMS Version       : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
Agent Home        : D:\oracle\product\11.2.0\dbhome_1\localhost_orcl
Agent binaries    : D:\oracle\product\11.2.0\dbhome_1
Agent Process ID : 3648
Agent URL         : https://localhost:3938/emd/main
Repository URL    : https://localhost:5500/em/upload/
Started at        : 2011-08-19 22:38:02
Started by user   : SYSTEM
Last Reload       : 2011-08-19 22:38:02
Last successful upload                       : 2011-08-19 22:39:48
Total Megabytes of XML files uploaded so far :     0.04
Number of XML files pending upload           :        0
Size of XML files pending upload(MB)         :     0.00
Available disk space on upload filesystem    :     0.13%
Data channel upload directory                : D:/oracle/product/11.2.0/dbhome_1
/localhost_orcl/sysman/recv
Collection Status                            : Disabled by Upload Manager
Last successful heartbeat to OMS             : 2011-08-19 22:40:15
Agent is Running and ReadyHowever, i read here: http://tejinderk.blogspot.com/2011/06/emd-upload-error.html that:
"The agent collections will stop when the space on the disk is used beyond the default. Solution is to release the space on the disk."
Ok, how to release space on the disk? What exactly means this? I have enough space on my D partition, where the Oracle product is.
Please help, i want to see the EM page like this: http://oracleflash.com/22/Add-ASM-Instance-into-Enterprise-Manager.html
Thanks!

Hi,
According to your agent status output you only have 0.13% of disk free. You need to delete some files to clear the space.
Available disk space on upload filesystem : 0.13%
There is a file called emd.properties (on UNIX) that has the following section in it. You can modify UploadMaxDiskUsedPct to bypass the space restriction, but the default is 98% and in your case, you would have to change it to 100% to work, which is probably not a good idea.
# The maximum amount (%) of disk space that can be used on the EMD filesystem
# before the following is disabled:
# - Collection of data (upload manager)
# - Logging and tracing
# - Diagnosability traces
#@description=
#@valueType=Int
#@LOV=
#@default=98
UploadMaxDiskUsedPct=98
Milina

Agent Upload error: ERROR-400|ORA-01461: can bind a LONG value ...

Periodically receiving the following error on our Grid Control machine:
[oracle@lugc01 agent10g]$ ./bin/emctl upload agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD upload error: Failed to upload file B0000021.xml: HTTP error.
Response received: ERROR-400|ORA-01461: can bind a LONG value only for insert into a LONG column
This is the agent that is on the host that runs Grid Control. GC Seems to be running fine, but the agent has this problem quite regularly. This also seems to happen on other linux 10.2.0.4 agents as well.
To remedy it, I go in and remove the upload data in $AGENT_HOME/sysman/emd/upload and then restart the agent. I don't like doing this.
Any ideas?

Hi
The error display is very strong. The mean is that the agent try upload a file to the OMS and when the OMS Server go to insert the data in a SYSMAN Table , the value is of a LONG COLUMN and the table not have this type of column.
Please provide me:
- When the error appear , take the xml file and send me
- Run this comand in the agent:
emctl config agent listtargets
If i have the xml file, i can try to solve the problem
Regards
Roberto Hernandez
[email protected]

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

Post in the iMovie forum.

Redundant Binary Upload Error

Similar Messages

Maybe you are looking for