Redundent mail server setup (backup mail server)
i have been reading all the post of setting up a mackup postfix server. i have looked at the configuration files and have a second machine ready to be implemented but have some questions on how exactly the backup works. my current setup is:
- xserve1 with 10.4.3 OD master running mail, web, dns, ichat, ftp, host name is mail.mydomain.com
- xserve2 with 10.4.3 (i will make this replica) running web and backup dns
- G4 466MHz with 10.4.3 Server running mail and web, host name is mail2.mydomain.com (this is to bemy postfix backup server)
all 3 are behind a firewall with NAT. they have local LAN IPs with NAT to 3 separate WAN IPs and open ports for the needed services.
my first question is: do i need to run dns as well on mail2.mydomain.com?
while i understand that mail stays in the queue on the postfix backup, does that mean that while mail.mydomain.com (primary mail server) is down users will not be getting any mail? can the users actually login to the mail2.mydomain.com and if yes how do they authorize?
should i keep mail2.mydomain.com as a standalone or make it part of the directory?
any info is appreciated.
thanks
martin
xserve G5 Mac OS X (10.4.3)
don't mail servers hold mail for days anyway and keep
retrying and when our mail comes back up will get all
the mail?
Yes, they typically do (unless some braindead administrator has configured his server to try only for a few hours or so).
i assume there is no difference if my
backup mail server runs on 10.3.9 then?
None whatsoever.
- is there a practical way to set up a mail that
clinets can login to and check mail while the primary
server is down?
Practical? No.
can the backup server forward as well
while it holds to the queue?
Why would you want that? Where should it forward to if the primary is down? As soon as the primary is up, the secondary will forward to i.
the last time i had some
coruption and problems with reconstruct (which you
helped me with), we were down for 24 hours. i am
trying to avoid this. i have an image and i run
mailbfr to backup i assume i can use that in case of
harware failure or massive os corruption that may
take hours to fix.
If push comes to shove this may help. Although images are never too brilliant for mail services recovery.
my problem is that if this happens
during the week, during daytime we cannot really
afford to be down at that time.
This is really your call. Only you can decide how much money you want/need to throw at resilience. But if you decide you cannot afford more than an hour of downtime, you will need far more than an onsite secondary mx
Alex
Similar Messages
-
Simple question; Mac Server Setup for Mail, iCal and Address Book Services.
Hi Guys;
I'm new to the Mac Server world and need a few questions answered.
I have purchased a new Mac mini Server for hosting File, Web, Mail, iCal and Address Book Services.
I’m comfortable setting up File and Web Services however I’m a bit uneasy setting up Mail, iCal and Address Book services to be access locally and remotely(via the internet).
My current setup is;
Internet connection (Dynamic IP) -> Router -> Mac mini Server.
I have purchased a domain name (Thornton-net.com) from DynDns.com + a custom DNS service as I can setup my router to update my domain’s IP address automatically.
I can access File and Web Services remotely (thortnon-net.com) perfectly without any issues via the Port Forwarding feature of the Router.
If I setup Mail, iCal and Address Book Services -> will Mail, iCal and Address Book clients be able to access these services hosted by the server via Thornton-net.com?
Message was edited by: Allan.ThorntonWelcome to the forums.
For mail services (and specifically for your outbound mail to be accepted by other mail servers) your mail server needs to have a static IP address and matching forward and reverse and MX records, or a tunnel to a static IP (with matching DNS), or you need another mail server where you have an authorized relay. Without that, your mail will be considered a spam engine, and dropped.
Additionally, your particular tier of service with your ISP (with a static IP) will generally allow server-oriented access and server-oriented network traffic, where a residential or other tier of service (with a dynamic IP addresses) can be firewalled.
The ISP controls the "high ground" of the network connections here, so you pretty much get to play by their rules and requirements. If they don't offer static IP, then (presuming their T&Cs permit it) you get to tunnel (via IPv6, for instance) to a tunnel broker, and receive your network traffic via that (and with matching DNS) point of presence. That could well be a tunnel for your mail at whichever your DNS provider is here, because you'll have issues with your dynamic address. (You get to sort out if they offer that.)
Far and away the easiest approach (if you want to host this stuff yourself) is to work with the ISP. They're inherently involved in your network, and they and they alone have full control over your reverse DNS configuration. -
Backup server setup info with Server Assistant
Hi,
I'm trying to backup my OS X Server (10.9.4) setup information using Server Assistant. On the 'Welcome' page in the Assistant, I selected "Save setup information in a file or directory record." The other choices are "Install software on a remote server" or "Setup a remote server." When I click Continue, the Assistant acts more like it's doing an initial installation as opposed to a backup of settings that are already in use. It asks for the OS X Sever serial number, and even for the administrator name, shortname, password, and to verify the password, just as though i'm setting up the server for the first time. I'm afraid to continue past the Administrator Account page since it seems like it might copy over my current setup.
OS X Server Help is useless here. It only states that you can backup the server settings, not how to do it.
Anybody ever do this before? Should I just proceed?
thanks
b
X Serve Mac OS X (10.4.9)Hi
You can use Server Assistant but it can only save a configuration file to another server running directory services. You can save property lists for individual configured services by drag dropping the propery list to the desktop (small icon above the Settings Save button. Transfer them to a memory stick or something suitable. Server Admin can be configured later on with these property lists. Export Users and Groups, bear in mind passwords are not transferred across. You can transfer passwords using the appropriate command line tools, but this is not trivial. Most people find it easier to define a password policy for all users once they have been re-imported.
For many reasons I would not advise you to save the Open Directory property list.
If you are planning to change the server name and/or IP address then don’t start the services after drag dropping the transferred property lists, issue changeip first – consult the man page for proper usage. Restart the server twice and then start your services one by one starting with AFP, Windows and DHCP, test these with a test user in the local directory node. When you are ready move on to DNS, test this thoroughly before moving on to any DNS dependent services such as LDAP, Mail, Web, SUS etc.
Hope this helps -
Hi Team,
Earlier i had SQL Server 2008 R2 on my Machine. For one work around i unistall SQL Server 2008 R2 and Trying to install SQL Server 2008 but i am not able to install with below error:
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
Method not found: 'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()'..
ThanksHi Lydia,
i have followed the above step and i am able to proceed further but while installation i am getting the below error consistently.
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
Locating the SQL Server Browser service component failed with Windows Installer return code '2'. The component ID: '{2E86FD41-C179-456E-8E6A-5157ED427228}'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
&Retry
Cancel
2:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Retrieving full path to the SQL Server Browser service executable using Windows Installer
API for the SQL Server Browser component with ID '{2E86FD41-C179-456E-8E6A-5157ED427228}'..
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
OK
After ignoring these step..installation getting complete but ..at the end i am not able to connect to server.
Could you please help me on this.
Thanks,
Sumit -
Manipulating a Server Setup saved by Server Assistant
I have saved server settings to my Open Directory (LDAP) using Server Assistant and want to change or delete these settings. My LDAP master is Mac OS X Server 10.3.9 if that helps. How do I do this? Thanks, Rob
I found that using the Inspector tab in WorkGroup Manager is where you can delete and manage saved server setup files.
-
Exchange server setup on Mail stopped working recently
Hello,
I have an Exchange mail account, that's setup using a POP account type. This was working up till just two days ago. Now, every time I try to access my Exchange email account on Mail I get this error:
"The attempt to read data from the server "xxxx.xxxx.com" failed."
I've tried deleting the account and recreating it...I get the same error. A few notes:
1. When I recreate the account, the setup process seems to be able to connect to the server (trying incorrect login credentials results in an error, correct credentials do not return an error). As soon as the account is created, I get the above error.
2. I have this Exchange account setup in Entourage and on my iPhone and it works in both of these places.
Any help or suggestions would be greatly appreciated.Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup -
Mail account setup via mail gets blocked by server
My friend used the same host as me. I copied all my settings (imap with in and outgoing pasword). But somehow he is shut out of the server as it records bruteforce attacks from his mac. We reset the account many times. Pasword is correct. The provider accepted him back from the blacklist. But when we reconnect we are shut out again. Yet on my mac it works fine. Any tips?
Hi there,
I also use BT & haven't had any problems although I tend to save my documents to the Desktop & then send them either by dragging them to the Mail Icon or by creating a new e-mail & then attaching the document. Have you tried sending via these methods? Also, are you able to send e-mails without attachments without any problems?
Ben -
Mail/Alert setup at PROD server
Hi,
My current OBIEE runs on HP-UX, I wanted to set-up mail/alert facilities on OBIEE, like we use iBots/Deliver for single user application.
What all things I need to take care to set-up email/alart facilities at PROD?
Any help is well appreciated.
Regards
JanHi, Thanks for your mail,
How do I load the BI env variables? Where do I get those? I am very new to PROD installation part.
I have the Production OBIEE installation CD which I have got from Oracle, At present we are not using Delivers at all. Is Oracle Deliver free licensed software which comes along with OBIEE CD from Oracle?It will be great if you could let me know step wise what need to be taken care to have facilities for email/alert.
Regards
Jan -
Mail + account setup properly, mail fetching starts but emails don't appear
I'm using Apple's "Mail" program for the first time (after having used Eudora for 20 years).
I successfully:
- Imported all my Eudora mailboxes + contents
- Set up my email account settings
- Connected to the Internet and sent myself a test email
HOWEVER, when I "Check Mail," and watch the "Activity" window, it seems to show my computer successfully connecting to the email server and all my pending emails being "fetched," *but when the fetching is complete, they have not appeared in my Inbox!* I don't get an error message or anything like that -- everything seems to be working exactly as it is supposed to be. The only problem is that the emails simply don't get downloaded to my computer, even though the Activity monitor seems to show them doing so.
I finally was able to open the "Mail" program's "Account info" window (it's not easy to find!), and it reveals that the same 15 pending emails are still awaiting me on my ISP's mail server, even after repeated fetchings of them. While watching both the "Account info" window and "Activity" window, I once again click "Get All New Mail," watch the 15 emails seemingly getting fetched, but when it's all over (3 seconds) -- they're still on the server and still not on my hard drive.
I don't know how to fix this glitch because the program doesn't seem to think anything's going wrong!
Obviously I must have mistakenly clicked some setting that prevents the emails from being downloaded to my computer, but I've scanned the Preferences pane and every single menu option dozens of times, and can't find what I've done wrong.
Any suggestions? i came so close to making the migration without any major problems, and on the very last step something went awry. Very frustrating!As to "Rules":
I'd already investigated that many times. The only "Rule" was a disabled unchecked rule about "Get Apple News," a subscription to the Apple RSS feed. However, at your suggestion, I also just now deleted it, and then refetched the mail afterward, with the the exact same unchanged result -- still nothing arrives. (Tried several times.)
As for the "Junk" mail setting:
The only two boxes checked were "Enable Junk Mail filtering," and "When junk mail arrives, mark it as junk mail, but leave it in my Inbox." So, even if the incoming mail had been marked as junk, I still should have seen it in my Inbox. Also, Junk's "Advanced" box is greyed out and unavailable to click. All that is moot, however, because I just now unchecked "Enable Junk Mail filtering," so the entire Junk preference pane is now greyed out and disabled; and even after that, when I check for new mail, I get the exact same problem as before, unchanged.
As to "POP" vs. "IMAP":
My account is supposed to be a "POP" account, and it is indeed shown as being a "POP" account in the Accounts preference pane.
But here's a new observation I just made:
When checking mail, in the left-hand sidebar on my "Inbox" window, at the bottom is a section called "MAIL ACTIVITY." When I check for new mail, in this activity box it says "Incoming messages, 1 of 24" then "Incoming messages 2 of 24" all the way up to "Incoming messages 24 of 24," with a blue progress bar filling up below it -- +exactly as you would expect if the mail was successfully being fetched+ (it's up to 24 messages on the server now). Yet after all that, after all 24 are shown as being fetched -- *there is still NOTHING new in my !nbox*! (Or in any other mailbox.) And in the previously mentioned "Account Info" window, afterwards all the emails are still shown as awaiting me unfetched on the server.
So mysterious and frustrating! Every setting and activity seems to be exactly as it should be, with the sole problem that nothing ever actually shows up! The answer is probably so simple, I can't see it. -
SQL Server Setup Failure 0x84B10001 (SQL 2012 SP2 and SQL 2014 Standard)
I'm having a problem with SQL Server Setup. I had SQL Server 2012 R2 SP1 installed, and the SP2 installer would fail.
I decided to just get SQL Server 2014. The setup (and system configuration checker) for that fails with the same error.
SQL Server Setup failure
SQL Server Setup has encountered the following error:
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
Error code 0x84B10001
I found this and other posts about similar problems that point at MSDE being the cause.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bc9f4949-1b45-427c-aa2b-d2222488a13e/problems-installing-sql-server-2012error-code-0x84b10001?forum=sqlexpress
I definitely had MSDE installed, but I went through the steps to manually remove it and rebooted with no luck.
/* Don Reynolds */(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xsd' loaded
into datastore path '/Datastore/ProductSettings/SqlBrowserStopService/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObject.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObjectDefault.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObjectDefault.xml' validated with schema 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObject.xsd' loaded into datastore path '/Datastore/ProductSettings/Sku/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObject.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObjectDefault.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObjectDefault.xml' validated with schema 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObject.xsd' loaded into datastore path '/Datastore/ProductSettings/Sku/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/Repl/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xsd' loaded into datastore
path '/Datastore/ProductSettings/SqlRSSHP/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xsd' loaded into
datastore path '/Datastore/ProductSettings/SqlRSSHP/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/SqlRS/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/SqlRS/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xsd' loaded into datastore
path '/Datastore/ProductSettings/SqlRS/DBPrivate'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementTools/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementTools/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementToolsAdvanced/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementToolsAdvanced/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateSettings.xsd' loaded
into datastore path '/Datastore/ProductSettings/DReplayController/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateSettings.xsd' loaded into
datastore path '/Datastore/ProductSettings/DReplayClient/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterDisk/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterDisk/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterGroup/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterGroup/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterIPAddresses/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterIPAddresses/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/FailOverClusterName/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/FailoverClusterName/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterNode/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterNode/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xsd' loaded into datastore path '/Datastore/ProductSettings/SQLServerSCP/Private'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodesStatusPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodesStatusPublicConfig.xml' loaded into datastore path '/Datastore/ProductSettings/ClusterNodesStatus/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettingsDefaults.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettingsDefaults.xml' validated with schema 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettings.xsd' loaded into datastore path '/Datastore/ProductSettings/ASSIP/Public'
(01) 2014-07-02 10:52:57 Slp: Completed Action: LoadPackageDatastoreObjects, returned True
(01) 2014-07-02 10:52:57 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:57 Slp: Running Action: InitializeInputSettingStore
(01) 2014-07-02 10:52:57 Slp: Completed Action: InitializeInputSettingStore, returned True
(01) 2014-07-02 10:52:57 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:57 Slp: Running Action: InitializeRoleService
(01) 2014-07-02 10:52:57 Slp: Loading role: SPI_AS_NewFarm
(01) 2014-07-02 10:52:58 Slp: Loading role: SPI_AS_ExistingFarm
(01) 2014-07-02 10:52:58 Slp: Loading role: AllFeatures_WithDefaults
(01) 2014-07-02 10:52:58 Slp: Completed Action: InitializeRoleService, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessChainerCommandLineArguments
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: WORKFLOW
(01) 2014-07-02 10:52:58 Slp: Value specified: RUNRULES
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: TIMESTAMP
(01) 2014-07-02 10:52:58 Slp: Value specified: 20140702_105236
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: LOGMARKER
(01) 2014-07-02 10:52:58 Slp: Value specified:
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: MEDIASOURCE
(01) 2014-07-02 10:52:58 Slp: Value specified: R:\
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: INSTALLMEDIAPATH
(01) 2014-07-02 10:52:58 Slp: Value specified: R:\x64\setup\
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: ENU
(01) 2014-07-02 10:52:58 Slp: Value specified: True
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: MEDIALAYOUT
(01) 2014-07-02 10:52:58 Slp: Value specified: Full
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: ACTION
(01) 2014-07-02 10:52:58 Slp: Value specified: RUNRULES
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: RULES
(01) 2014-07-02 10:52:58 Slp: Value specified: SCCCheckRules
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessChainerCommandLineArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessMediaChainerConfigFileArguments
(01) 2014-07-02 10:52:58 Slp: Procssing media configuration file R:\x64\setup\..\DefaultSetup.ini.
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: PID
(01) 2014-07-02 10:52:58 Slp: New setting source: ConfigFile; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessMediaChainerConfigFileArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessChainerConfigFileArguments
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessChainerConfigFileArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessSlipstreamParameters
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessSlipstreamParameters, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Skipping Action: SetRoleAndUIModeForExpressMedia
(01) 2014-07-02 10:52:58 Slp: Action is being skipped due to the following restrictions:
(01) 2014-07-02 10:52:58 Slp: Condition "IsMediaExpress" did not pass as it returned false and true was expected.
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: InitializeRetryHandler
(01) 2014-07-02 10:52:58 Slp: Completed Action: InitializeRetryHandler, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ExecuteBootstrapProcessInputSettings
(01) 2014-07-02 10:52:58 Slp: Workflow to execute: 'BOOTSTRAPPROCESSINPUTSETTINGS'
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: StartSqmSession
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\120
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to get registry value CustomerFeedback
(01) 2014-07-02 10:52:58 Slp: SQM Service: Sqm does not have active session.
(01) 2014-07-02 10:52:58 Slp: SQM is opted-out by command line parameter /SQMREPORTING or registry key setting, SQM session is closed
(01) 2014-07-02 10:52:58 Slp: Completed Action: StartSqmSession, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ValidateChainerSetting
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Compute new PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Read lcid 1033 from CultureInfo
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: Completed Action: ValidateChainerSetting, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessFeatureCommandLineArguments
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessFeatureCommandLineArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessMediaFeatureConfigFileArguments
(01) 2014-07-02 10:52:59 Slp: Procssing media configuration file R:\x64\setup\..\DefaultSetup.ini.
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessMediaFeatureConfigFileArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessFeatureConfigFileArguments
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessFeatureConfigFileArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ValidateSettingsAgainstScenario
(01) 2014-07-02 10:52:59 Slp: Scenario: RunRules
(01) 2014-07-02 10:52:59 Slp: Completed Action: ValidateSettingsAgainstScenario, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: FinalCalculateSettings
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: Completed Action: FinalCalculateSettings, returned True
(01) 2014-07-02 10:52:59 Slp: Completed Action: ExecuteBootstrapProcessInputSettings, returned True
(01) 2014-07-02 10:52:59 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-07-02 10:52:59 Slp: Running discovery on local machine
(01) 2014-07-02 10:53:03 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-07-02 10:53:03 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747. ---> Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException:
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747. ---> System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.Throw(Exception e)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ThrowInvalidChar(Int32 pos, Char invChar)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, BufferBuilder internalSubsetBuilder, Int32& charCount, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRef(Boolean expand, BufferBuilder internalSubsetBuilder, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.HandleEntityReference(Boolean isInAttributeValue, EntityExpandType expandType, Int32& charRefEndPos)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributes()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElement()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElementContent()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlDocument.Load(XmlReader reader)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: --- End of inner exception stack trace ---
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(XmlDocument doc, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: --- End of inner exception stack trace ---
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
(01) 2014-07-02 10:53:03 Slp: Received request to add the following file to Watson reporting: c:\temp\tmpFEEB.tmp
(01) 2014-07-02 10:53:03 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-07-02 10:53:03 Slp: Inner exceptions are being indented
(01) 2014-07-02 10:53:03 Slp:
(01) 2014-07-02 10:53:03 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException
(01) 2014-07-02 10:53:03 Slp: Message:
(01) 2014-07-02 10:53:03 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: HResult : 0x84b10001
(01) 2014-07-02 10:53:03 Slp: FacilityCode : 1201 (4b1)
(01) 2014-07-02 10:53:03 Slp: ErrorCode : 1 (0001)
(01) 2014-07-02 10:53:03 Slp: Stack:
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(XmlDocument doc, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: Inner exception type: System.Xml.XmlException
(01) 2014-07-02 10:53:03 Slp: Message:
(01) 2014-07-02 10:53:03 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: HResult : 0x80131940
(01) 2014-07-02 10:53:03 Slp: Stack:
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.Throw(Exception e)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ThrowInvalidChar(Int32 pos, Char invChar)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, BufferBuilder internalSubsetBuilder, Int32&
charCount, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRef(Boolean expand, BufferBuilder internalSubsetBuilder, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.HandleEntityReference(Boolean isInAttributeValue, EntityExpandType expandType, Int32& charRefEndPos)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributes()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElement()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElementContent()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlDocument.Load(XmlReader reader)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix,
String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:08 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-07-02 10:53:08 Slp: Parameter 0 : SQL Server
2014@RTM@
(01) 2014-07-02 10:53:08 Slp: Parameter 1 : Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument
(01) 2014-07-02 10:53:08 Slp: Parameter 2 : System.Xml.XmlTextReaderImpl.Throw
(01) 2014-07-02 10:53:08 Slp: Parameter 3 :
Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException@1201@1
(01) 2014-07-02 10:53:08 Slp: Parameter 4 :
System.Xml.XmlException@-2146232000
(01) 2014-07-02 10:53:08 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-07-02 10:53:08 Slp:
Final Parameter Values
(01) 2014-07-02 10:53:08 Slp: Parameter 0 : SQL Server
2014@RTM@
(01) 2014-07-02 10:53:08 Slp: Parameter 1 : 0xDBE3EAAC
(01) 2014-07-02 10:53:08 Slp: Parameter 2 : 0x066FCAFD
(01) 2014-07-02 10:53:08 Slp: Parameter 3 :
0xDF039760@1201@1
(01) 2014-07-02 10:53:08 Slp: Parameter 4 : 0x5539C151
(01) 2014-07-02 10:53:08 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-07-02 10:53:10 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:10 Slp: Watson bucket for exception based failure has been created
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\120
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-07-02 10:53:10 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\120\EnableErrorReporting=.
(01) 2014-07-02 10:53:10 Slp: WER: Application level consent value '' was mapped to consent status 'WerConsentNotAsked'
(01) 2014-07-02 10:53:12 Slp: WER: Result of the submission:: 'WerReportCancelled'
(01) 2014-07-02 10:53:12 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-07-02 10:53:12 Slp:
(01) 2014-07-02 10:53:12 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:53:12 Slp:
(01) 2014-07-02 10:53:12 Slp: Error result: -2068774911
(01) 2014-07-02 10:53:12 Slp: Result facility code: 1201
(01) 2014-07-02 10:53:12 Slp: Result error code: 1
(01) 2014-07-02 10:53:12 Slp: SQM Service: Sqm does not have active session.
/* Don Reynolds */ -
I recently reinstalled Mac OS X on my MacBook Pro (to get rid of some of the software I had downloaded/installed during my first run with a Mac), and I had backed up my Keychain, Mail and preferences, and iCalendar database to a CD--or so I thought. It seems that none of the files were correct during the burn, but that's okay; I'm not out much. I was still able to import my mail after I finished setting up my accounts.
Now everytime I run Mail, it asks me to setup my accounts again. It's like the settings just doesn't stick.For your information, you don't need to reinstall OS X to remove downloaded software; not only is it time consuming, it's completely unnecessary. By and large, to remove a piece of software you've downloaded and installed, you locate the program, click on it once to select it, then press Command-Shift-Delete to move it to the Trash, then empty the Trash. Some installer packages also have uninstall features built in to find all the files they may have scattered on your hard drive during installation.
You may have a corrupted Preferences file. Go to Username/Library/Preferences and find the file com.apple.mail.plist, and drag it to your Desktop. Then try launching Mail and setup your Mail account(s) again; quit Mail and relaunch to see if it asks you to setup accounts again. If not, then your problem would be solved and you can delete the old preferences file on your Desktop.
Mulder -
Hi.
I am in trouble setting up a basic mail server. I just spent the last 10 or so hours, in one more try to set it, and yet no results.
Please, give some help as i am becoming sort of desperated with it
This time, i followed this guide since the beginning.
What I've done:
- Created a user vmail, with home directory set on /var/mail/vmail/
- Had a LAMP server already working.
- Created two databases: postfix_db and roundcube_db, owned by postfix_user and roundcube_user respectively.
- Since it is for personal use and i don't use "old/odd clients like Outlook" i skipped smtps. And made the following files:
My postfix main.cf(every commented line removed):
queue_directory = /var/spool/postfix
command_directory = /usr/bin
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
mail_owner = postfix
mydomain = mydomainname.tld
unknown_local_recipient_reject_code = 550
alias_maps = hash:/etc/postfix/aliases
alias_database = $alias_maps
debug_peer_level = 2
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
sendmail_path = /usr/bin/sendmail
newaliases_path = /usr/bin/newaliases
mailq_path = /usr/bin/mailq
setgid_group = postdrop
html_directory = no
manpage_directory = /usr/share/man
sample_directory = /etc/postfix/sample
readme_directory = /usr/share/doc/postfix
inet_protocols = ipv4
relay_domains = *
virtual_alias_maps = proxy:mysql:/etc/postfix/virtual_alias_maps.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_mailbox_base = /var/mail/vmail
virtual_mailbox_limit = 512000000
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
local_transport = virtual
local_recipient_maps = $virtual_mailbox_maps
transport_maps = hash:/etc/postfix/transport
smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_sasl_local_domain = $mydomain
broken_sasl_auth_clients = yes
smtpd_tls_loglevel = 1
Postfix master.cf
smtp inet n - n - - smtpd
submission inet n - n - - smtpd
-o smtpd_tls_security_level=encrypt
-o smtpd_sasl_auth_enable=yes
pickup unix n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr unix n - n 300 1 qmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
relay unix - - n - - smtp
showq unix n - n - - showq
error unix - - n - - error
retry unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
scache unix - - n - 1 scache
/etc/postfix/virtual_alias_maps.cf (sample password)
user = postfix_user
password = m/<~VN4XQ!G=jE[A/-
hosts = localhost
dbname = postfix_db
query = SELECT goto FROM alias WHERE address='%s' AND active = true
/etc/postfix/virtual_domains_maps.cf
user = postfix_user
password = m/<~VN4XQ!G=jE[A/-
hosts = localhost
dbname = postfix_db
query = SELECT domain FROM domain WHERE domain='%s' AND backupmx = false AND active = true
/etc/postfix/virtual_mailbox_limits.cf
user = postfix_user
password = m/<~VN4XQ!G=jE[A/-
hosts = localhost
dbname = postfix_db
query = SELECT quota FROM mailbox WHERE username='%s'
/etc/postfix/virtual_mailbox_maps.cf
user = postfix_user
password = m/<~VN4XQ!G=jE[A/-
hosts = localhost
dbname = postfix_db
query = SELECT maildir FROM mailbox WHERE username='%s' AND active = true
- Created the SSL key with no problem, and put it in place.
Edited dovecot.conf:
protocols = imap pop3
auth_mechanisms = plain
passdb {
driver = sql
args = /etc/dovecot/dovecot-sql.conf
userdb sql {
driver = sql
args = /etc/dovecot/dovecot-sql.conf
service auth {
unix_listener auth-client {
group = postfix
mode = 0660
user = postfix
user = root
mail_home = /var/mail/vmail/%d/%u
mail_location = maildir:~
ssl_cert = </etc/ssl/private/server.crt
ssl_key = </etc/ssl/private/server.key
dict {
#quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
#expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
!include conf.d/*.conf
!include_try local.conf
/etc/dovecot/dovecot-sql.conf
driver = mysql
connect = host=localhost dbname=postfix_db user=postfix_user password=m/<~VN4XQ!G=jE[A/-
default_pass_scheme = MD5-CRYPT
user_query = SELECT '/var/mail/vmail/%d/%u' as home, 'maildir:/var/mail/vmail/%d/%u' as mail, 5000 AS uid, 5000 AS gid, concat('dirsize:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1'
password_query = SELECT username as user, password, '/var/mail/vmail/%d/%u' as userdb_home, 'maildir:/var/mail/vmail/%d/%u' as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1'
- Installed postfixadmin and roundcube and made their apache alias.
- Made directories writable for them.
/etc/webapps/postfixadmin/config.inc.php (note that there is no "?>" to end the script, it came just like that, and since it had no error there ill assume its normal)
<?php
$CONF['configured'] = true;
$CONF['setup_password'] = '562bc24a874b0c2a7340e3da04b3fdf6:d60282f5cbc19340c73cafbb6526379be696a7c7';
$CONF['postfix_admin_url'] = '[url]http://mydomain.com/postfixadmin[/url]';
$CONF['postfix_admin_path'] = dirname(__FILE__);
$CONF['default_language'] = 'en';
$CONF['database_prefix'] = '';
$CONF['database_tables'] = array (
'admin' => 'admin',
'alias' => 'alias',
'alias_domain' => 'alias_domain',
'config' => 'config',
'domain' => 'domain',
'domain_admins' => 'domain_admins',
'fetchmail' => 'fetchmail',
'log' => 'log',
'mailbox' => 'mailbox',
'vacation' => 'vacation',
'vacation_notification' => 'vacation_notification',
'quota' => 'quota',
'quota2' => 'quota2',
$CONF['admin_email'] = '[email protected]';
$CONF['smtp_server'] = 'localhost';
$CONF['smtp_port'] = '25';
$CONF['encrypt'] = 'md5crypt';
$CONF['authlib_default_flavor'] = 'md5raw';
$CONF['dovecotpw'] = "/usr/sbin/dovecotpw";
$CONF['min_password_length'] = 5;
$CONF['generate_password'] = 'NO';
$CONF['show_password'] = 'NO';
$CONF['page_size'] = '10';
$CONF['default_aliases'] = array (
'abuse' => '[email protected]',
'hostmaster' => '[email protected]',
'postmaster' => '[email protected]',
'webmaster' => '[email protected]'
$CONF['domain_path'] = 'NO';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['maildir_name_hook'] = 'NO';
$CONF['aliases'] = '10';
$CONF['mailboxes'] = '10';
$CONF['maxquota'] = '10';
$CONF['quota'] = 'NO';
$CONF['quota_multiplier'] = '1024000';
$CONF['transport'] = 'NO';
$CONF['transport_options'] = array (
'virtual', // for virtual accounts
'local', // for system accounts
'relay' // for backup mx
$CONF['transport_default'] = 'virtual';
$CONF['vacation'] = 'NO';
$CONF['vacation_domain'] = 'autoreply.change-this-to-your.domain.tld';
$CONF['vacation_control'] ='YES';
$CONF['vacation_control_admin'] = 'YES';
$CONF['alias_control'] = 'NO';
$CONF['alias_control_admin'] = 'NO';
$CONF['special_alias_control'] = 'NO';
$CONF['alias_goto_limit'] = '0';
$CONF['alias_domain'] = 'YES';
$CONF['backup'] = 'YES';
$CONF['sendmail'] = 'YES';
$CONF['logging'] = 'YES';
$CONF['fetchmail'] = 'YES';
$CONF['fetchmail_extra_options'] = 'NO';
$CONF['show_header_text'] = 'NO';
$CONF['header_text'] = ':: Postfix Admin ::';
$CONF['user_footer_link'] = "[url]http://mydomain.com[/url]";
$CONF['show_footer_text'] = 'YES';
$CONF['footer_text'] = 'Return to mydomain.com';
$CONF['footer_link'] = '[url]http://mydomain.com[/url]';
$CONF['welcome_text'] = <<<EOM
Welcome to your new account.
EOM;
$CONF['emailcheck_resolve_domain']='YES';
$CONF['show_status']='NO';
$CONF['show_status_key']='NO';
$CONF['show_status_text']=' ';
$CONF['show_undeliverable']='NO';
$CONF['show_undeliverable_color']='tomato';
$CONF['show_undeliverable_exceptions']=array("unixmail.domain.ext","exchangeserver.domain.ext","gmail.com");
$CONF['show_popimap']='NO';
$CONF['show_popimap_color']='darkgrey';
$CONF['show_custom_domains']=array("subdomain.domain.ext","domain2.ext");
$CONF['show_custom_colors']=array("lightgreen","lightblue");
$CONF['recipient_delimiter'] = "";
$CONF['create_mailbox_subdirs_prefix']='INBOX.';
$CONF['used_quotas'] = 'NO';
$CONF['new_quota_table'] = 'NO';
$CONF['theme_logo'] = 'images/logo-default.png';
$CONF['theme_css'] = 'css/default.css';
$CONF['xmlrpc_enabled'] = false;
if (file_exists(dirname(__FILE__) . '/config.local.php')) {
include(dirname(__FILE__) . '/config.local.php');
$CONF['domain_path'] = 'YES';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['database_type'] = 'mysqli';
$CONF['database_host'] = 'localhost';
$CONF['database_user'] = 'postfix_user';
$CONF['database_password'] = 'm/<~VN4XQ!G=jE[A/-';
$CONF['database_name'] = 'postfix_db';
- I went to domain/postfixAdmin/setup.php and domain/roundcube/installer/ and everything was ok.
db.inc.php (roundcube):
<?php
$rcmail_config = array();
$rcmail_config['db_dsnw'] = 'mysql://roundcube_user:%3D%29CYbd9bK%210Z7%29AsWU@localhost/roundcube_db';
$rcmail_config['db_dsnr'] = '';
$rcmail_config['db_persistent'] = FALSE;
$rcmail_config['db_table_users'] = 'users';
$rcmail_config['db_table_identities'] = 'identities';
$rcmail_config['db_table_contacts'] = 'contacts';
$rcmail_config['db_table_contactgroups'] = 'contactgroups';
$rcmail_config['db_table_contactgroupmembers'] = 'contactgroupmembers';
$rcmail_config['db_table_session'] = 'session';
$rcmail_config['db_table_cache'] = 'cache';
$rcmail_config['db_table_cache_index'] = 'cache_index';
$rcmail_config['db_table_cache_thread'] = 'cache_thread';
$rcmail_config['db_table_cache_messages'] = 'cache_messages';
$rcmail_config['db_table_dictionary'] = 'dictionary';
$rcmail_config['db_table_searches'] = 'searches';
$rcmail_config['db_table_system'] = 'system';
$rcmail_config['db_sequence_users'] = 'user_ids';
$rcmail_config['db_sequence_identities'] = 'identity_ids';
$rcmail_config['db_sequence_contacts'] = 'contact_ids';
$rcmail_config['db_sequence_contactgroups'] = 'contactgroups_ids';
$rcmail_config['db_sequence_searches'] = 'search_ids';
main.inc.php(roundcube):
<?php
$rcmail_config = array();
$rcmail_config['debug_level'] = 5;
$rcmail_config['log_driver'] = 'file';
$rcmail_config['log_date_format'] = 'd-M-Y H:i:s O';
$rcmail_config['syslog_id'] = 'roundcube';
$rcmail_config['syslog_facility'] = LOG_USER;
$rcmail_config['smtp_log'] = true;
$rcmail_config['log_logins'] = false;
$rcmail_config['log_session'] = false;
$rcmail_config['sql_debug'] = false;
$rcmail_config['imap_debug'] = false;
$rcmail_config['ldap_debug'] = false;
$rcmail_config['smtp_debug'] = false;
$rcmail_config['default_host'] = 'tls://localhost/';
$rcmail_config['default_port'] = 993;
$rcmail_config['imap_auth_type'] = null;
$rcmail_config['imap_delimiter'] = null;
$rcmail_config['imap_ns_personal'] = null;
$rcmail_config['imap_ns_other'] = null;
$rcmail_config['imap_ns_shared'] = null;
$rcmail_config['imap_force_caps'] = false;
$rcmail_config['imap_force_lsub'] = false;
$rcmail_config['imap_force_ns'] = false;
$rcmail_config['imap_timeout'] = 0;
$rcmail_config['imap_auth_cid'] = null;
$rcmail_config['imap_auth_pw'] = null;
$rcmail_config['imap_cache'] = null;
$rcmail_config['messages_cache'] = false;
$rcmail_config['smtp_server'] = 'tls://localhost/';
$rcmail_config['smtp_port'] = 587;
$rcmail_config['smtp_user'] = '';
$rcmail_config['smtp_pass'] = '';
$rcmail_config['smtp_auth_type'] = '';
$rcmail_config['smtp_auth_cid'] = null;
$rcmail_config['smtp_auth_pw'] = null;
$rcmail_config['smtp_helo_host'] = '';
$rcmail_config['smtp_timeout'] = 0;
$rcmail_config['enable_installer'] = false;
$rcmail_config['dont_override'] = array();
$rcmail_config['support_url'] = '';
$rcmail_config['skin_logo'] = 'sorrybutnocookie';
$rcmail_config['auto_create_user'] = true;
$rcmail_config['user_aliases'] = false;
$rcmail_config['log_dir'] = 'logs/';
$rcmail_config['temp_dir'] = 'temp/';
$rcmail_config['message_cache_lifetime'] = '10d';
$rcmail_config['force_https'] = false;
$rcmail_config['use_https'] = false;
$rcmail_config['login_autocomplete'] = 0;
$rcmail_config['login_lc'] = 2;
$rcmail_config['skin_include_php'] = false;
$rcmail_config['display_version'] = false;
$rcmail_config['session_lifetime'] = 10;
$rcmail_config['session_domain'] = '';
$rcmail_config['session_name'] = null;
$rcmail_config['session_auth_name'] = null;
$rcmail_config['session_path'] = null;
$rcmail_config['session_storage'] = 'db';
$rcmail_config['memcache_hosts'] = null;
$rcmail_config['ip_check'] = true;
$rcmail_config['referer_check'] = false;
$rcmail_config['x_frame_options'] = 'sameorigin';
$rcmail_config['des_key'] = '0JaV%FnEivx9e+JdH2g*?n3n';
$rcmail_config['username_domain'] = '';
$rcmail_config['mail_domain'] = '';
$rcmail_config['password_charset'] = 'ISO-8859-1';
$rcmail_config['sendmail_delay'] = 0;
$rcmail_config['max_recipients'] = 0;
$rcmail_config['max_group_members'] = 0;
$rcmail_config['useragent'] = 'Roundcube Webmail/'.RCMAIL_VERSION;
$rcmail_config['product_name'] = 'Test';
$rcmail_config['include_host_config'] = false;
$rcmail_config['generic_message_footer'] = '';
$rcmail_config['generic_message_footer_html'] = '';
$rcmail_config['http_received_header'] = false;
$rcmail_config['http_received_header_encrypt'] = false;
$rcmail_config['mail_header_delimiter'] = NULL;
$rcmail_config['line_length'] = 72;
$rcmail_config['send_format_flowed'] = true;
$rcmail_config['mdn_use_from'] = false;
$rcmail_config['identities_level'] = 0;
$rcmail_config['client_mimetypes'] = null;
$rcmail_config['mime_magic'] = null;
$rcmail_config['mime_types'] = null;
$rcmail_config['im_identify_path'] = null;
$rcmail_config['im_convert_path'] = null;
$rcmail_config['image_thumbnail_size'] = 240;
$rcmail_config['contact_photo_size'] = 160;
$rcmail_config['email_dns_check'] = false;
$rcmail_config['no_save_sent_messages'] = false;
$rcmail_config['plugins'] = array();
$rcmail_config['message_sort_col'] = '';
$rcmail_config['message_sort_order'] = 'DESC';
$rcmail_config['list_cols'] = array('subject', 'status', 'fromto', 'date', 'size', 'flag', 'attachment');
$rcmail_config['language'] = null;
$rcmail_config['date_format'] = 'Y-m-d';
$rcmail_config['date_formats'] = array('Y-m-d', 'Y/m/d', 'Y.m.d', 'd-m-Y', 'd/m/Y', 'd.m.Y', 'j.n.Y');
$rcmail_config['time_format'] = 'H:i';
$rcmail_config['time_formats'] = array('G:i', 'H:i', 'g:i a', 'h:i A');
$rcmail_config['date_short'] = 'D H:i';
$rcmail_config['date_long'] = 'Y-m-d H:i';
$rcmail_config['drafts_mbox'] = 'Drafts';
$rcmail_config['junk_mbox'] = 'Junk';
$rcmail_config['sent_mbox'] = 'Sent';
$rcmail_config['trash_mbox'] = 'Trash';
$rcmail_config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash');
$rcmail_config['create_default_folders'] = false;
$rcmail_config['protect_default_folders'] = true;
$rcmail_config['quota_zero_as_unlimited'] = false;
$rcmail_config['enable_spellcheck'] = false;
$rcmail_config['spellcheck_dictionary'] = false;
$rcmail_config['spellcheck_engine'] = 'googie';
$rcmail_config['spellcheck_uri'] = '';
$rcmail_config['spellcheck_languages'] = NULL;
$rcmail_config['spellcheck_ignore_caps'] = false;
$rcmail_config['spellcheck_ignore_nums'] = false;
$rcmail_config['spellcheck_ignore_syms'] = false;
$rcmail_config['recipients_separator'] = ',';
$rcmail_config['max_pagesize'] = 200;
$rcmail_config['min_refresh_interval'] = 60;
$rcmail_config['upload_progress'] = false;
$rcmail_config['undo_timeout'] = 0;
$rcmail_config['address_book_type'] = 'sql';
$rcmail_config['ldap_public'] = array();
$rcmail_config['autocomplete_addressbooks'] = array('sql');
$rcmail_config['autocomplete_min_length'] = 1;
$rcmail_config['autocomplete_threads'] = 0;
$rcmail_config['autocomplete_max'] = 15;
$rcmail_config['address_template'] = '{street}<br/>{locality} {zipcode}<br/>{country} {region}';
$rcmail_config['addressbook_search_mode'] = 0;
$rcmail_config['default_charset'] = 'ISO-8859-1';
$rcmail_config['skin'] = 'larry';
$rcmail_config['mail_pagesize'] = 50;
$rcmail_config['addressbook_pagesize'] = 50;
$rcmail_config['addressbook_sort_col'] = 'surname';
$rcmail_config['addressbook_name_listing'] = 0;
$rcmail_config['timezone'] = 'auto';
$rcmail_config['prefer_html'] = true;
$rcmail_config['show_images'] = 0;
$rcmail_config['message_extwin'] = false;
$rcmail_config['compose_extwin'] = false;
$rcmail_config['htmleditor'] = 0;
$rcmail_config['prettydate'] = true;
$rcmail_config['draft_autosave'] = 300;
$rcmail_config['preview_pane'] = false;
$rcmail_config['preview_pane_mark_read'] = 0;
$rcmail_config['logout_purge'] = false;
$rcmail_config['logout_expunge'] = false;
$rcmail_config['inline_images'] = true;
$rcmail_config['mime_param_folding'] = 0;
$rcmail_config['skip_deleted'] = false;
$rcmail_config['read_when_deleted'] = true;
$rcmail_config['flag_for_deletion'] = false;
$rcmail_config['refresh_interval'] = 60;
$rcmail_config['check_all_folders'] = false;
$rcmail_config['display_next'] = true;
$rcmail_config['autoexpand_threads'] = 0;
$rcmail_config['reply_mode'] = 0;
$rcmail_config['strip_existing_sig'] = true;
$rcmail_config['show_sig'] = 1;
$rcmail_config['force_7bit'] = false;
$rcmail_config['search_mods'] = null;
$rcmail_config['addressbook_search_mods'] = null;
$rcmail_config['delete_always'] = false;
$rcmail_config['delete_junk'] = false;
$rcmail_config['mdn_requests'] = 0;
$rcmail_config['mdn_default'] = 0;
$rcmail_config['dsn_default'] = 0;
$rcmail_config['reply_same_folder'] = false;
$rcmail_config['forward_attachment'] = false;
$rcmail_config['default_addressbook'] = null;
$rcmail_config['spellcheck_before_send'] = false;
$rcmail_config['autocomplete_single'] = false;
$rcmail_config['default_font'] = 'Verdana';
- From what i can see, postfixadmin used and populated its database, but not roundcube.
- I can open postfixadmin and log in with no apparent errors (not that i know what to do with it instead of roundcube, but at least works...)
- Whenever i open roundcube it begins to output errors everywhere about db connection (I was only able after changing its .htaccess to Allow from all, is it a bad idea?)
DB Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_db.php (416): [1146] Table 'roundcube_db.session' doesn't exist (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'pq5ofv7ja0gh2sunsg38jmd3g1')
Warning: session_start(): Cannot send session cache limiter - headers already sent in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube.php on line 445
DB Error: [1146] Table 'roundcube_db.session' doesn't exist
DATABASE ERROR: CONNECTION FAILED!
Unable to connect to the database!
Please contact your server-administrator.
DB Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_db.php (416): [1146] Table 'roundcube_db.session' doesn't exist (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('pq5ofv7ja0gh2sunsg38jmd3g1', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJlbl9VUyI7dGFza3xzOjU6ImxvZ2luIjs=', 'xxx.xxx.xxx.xxx', '2014-02-08 07:34:46', '2014-02-08 07:34:46'))
Thats all i know. Whats wrong? (i already tried to set db logins with no pw at all, but still with the same problems)
How far am i to be able to send/receive one email? Please, tell me i am close...
Mail servers could be so much more linear to set up
Thanks for your help. Time to get some sleep!The roundcube db schema needs to setup manually. See /usr/share/webapps/roundcube/INSTALL
Also, from your /etc/webapps/postfixadmin/config.inc.php:
$CONF['domain_path'] = 'NO';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['maildir_name_hook'] = 'NO';
..which results in /var/mail/vmail/[email protected]
From your dovecot.conf
mail_home = /var/mail/vmail/%d/%u
...which results in /var/mail/vmail/domain.com/user
That doesn't fit together. -
Greetings,
I need some pro's cons, Ideas taunts and general whaddia thinks.
Setting up a new mail server. dpG5 xserve w/ 10,000 rpm drives
my thoughts are to take the user information off the machine to a second G5 xserve running as an ODM.
I thought about splitting IMAP/pop services to another box. keeping my primary SMTP Spam/AV away from cyrus, relaying inbound messages to the IMAP server.
so I would have
ODM.mydomain
SMTP1.mydomain
IMAP1.mydomain
-- Does anyone see any performance or configuration hick ups here?
now comes the ugly question.
How do I set up each smtp server. the imap server is still going to have to run smtp to deliver and recieve delivery of messages. but I need them to answer for mydomain, not host1.mydomain. I'm a little foggy on what comes first
--jThere are multiple ways of achieving this.
The simplest is for the servers to deliver via smtp to each other.
So (very very simplified):
Since you said you use OD, I assume all servers will refer to your OD master for user account details.
Server 1 (Filter)
Postfix & amavisd & ClamAV & spamassassin
main.cf and master.cf should be configured like you are used to now except that you only want to be able to send to the content filter and nowhere else.
In amavisd.conf uncomment and change IP (to IP of SMTP/IMAP server) of this line:
$forward_method = 'smtp:127.0.0.1:10025';
No relay settings needed, because you want mail to go the filter first and not to another SMTP server.
Server 2 (Mail Stores)
Postfix & Cyrus
main.cf and master.cf should be configured like you are used to now except that you do not want any kind of filtering anymore. Also set to accept only from Server 1 (since it should not accept incoming mail from the outside world directly)
Server 3 (Outgoing SMTP)
Postfix
main.cf and master.cf should be configured like you are used to now except that you do not need to accept incoming mail. Also no filtering needed (unless you want to scan outgoing mail)
Mail clients:
Point incoming to Server 2 and outgoing to Server 3
That's pretty much it. I know it's not a walkthrough , but then again this kind of setup is better fully understood rather than copied step-by-step.
Let me know if you need anything else.
Alex
P.S.
-Optionally you could use Server 3 as a secondary MX for backup reasons.
-For most Postfix settings see : http://www.postfix.org/postconf.5.html
-All of this can be further improved with firewall rules -
hi..what settings work on iphone 4 - lineone mail server setup.. have tried Tiscali recommendations, which aren't biong picked up..nightmare..!
Used Imap, Pop mail..!Thanks for the quick read and response. Do you feel the issue might lie with the fact that it is a Mac Mini? And possibly just not powerful enough to run Leopard Server? I have to say in our trials with MacPro it was like night and day as to how they performed. And if you could elaborate on this "Many VPNs don't play well with NAT so your VPN server should have a direct connection to the public network (preferably firewalled, of course, but not NATted)." Most every SoHo and for that matter uses simple NAT translation for security even our multi thousand dollar Cisco PIX and ASA's are basic NAT devices to start with. How would you put the VPN on public net while keeping the attack surface low for the rest of the services like file, web, mail and print?
Don't get me wrong I want this to work more than you can imagine. We are so tired of supporting MSFT technologies that cost thousands a year in antivirus, antispyware, antispam and other malware protection for the enterprise. We know that Leopard has great potential but for an integrator, getting this system up and functional is not an easy task. And the worst part of it is every time we have called for support the tech always lets out a sigh when they hear we have run standard setup because they are not allowed to walk us thru the server console to make repairs. And have been told by 3 techs so far that this is a new product and the support avenues are not there for standard since it just supposed to work out of the box. But when it doesn't then ohh well. Which is sorta sad...
DM -
Foe Windows 8.1 - Outlook mail: what is the server setup for iCloud mail?
Why ask under appletv security content?
http://support.apple.com/kb/ht4864
Maybe you are looking for
-
How do i add two programs to my current plan?
I wish to add Illustrator and Indesign to my current plan as i have started a graphic design course. Does anyone know how to do this without the added stress of jumping through hoops?
-
Video Streaming from a network camera!
Hi, Does anybody have an idea how to go about streaming video from a network camera using applets? I know its possible in JMF, but I was wondering if its possible without that because I guess it needs the user to install JMF. Or a way with JMF but to
-
Contribute CS4 Disc/ Download Link?
Greetings Contribute Forum Users! I have managed to lose my disc for Contribute CS4 and Tech Support suggested I post here to see if anyone happens to have a disc or the download link ferreted away? I have my own serial number, so no worries about u
-
I have a doozy of a problem on my hands. My company has introduced a password policy that every user must me now. Some of my criteria is that a password must contain at least one symbol and at least one number. In 10g I can use REGEXP_LIKE function,
-
Can we call a prepop adapter from object form ?
Hi, I have written a prepop adapter in object form which will take the valus of one attribute from object form field , in prepop adapter Im giving that field as the input parameter for one procedure and the output I should get in the process form.If