[Redwood] Abap_run error : Please choose a valid variant name

Hello all,
We have a problem with running ABAP programs using some variants : we have 30 variants but the program can only run with 25 variants, with the other 5 left the program displays this error :
Please choose a valid variant name
We then decided to run RSI_IMPORT_ABAP_PROGRAMS and RSI_IMPORT_VARIANTS but the script still fails and shows the "Please choose a valid variant name" error message.
We have checked if these 5 variants exist in the target system, and it does. What other check can we do to find why the jobs failed ?
Thanks a lot.
Regards

Hello Gerben,
I tried to run RSI_IMPORT_ABAP_PROGRAMS and RSI_IMPORT_VARIANTS again, and the variants exist in the target client.
Actually, I realized that I didn't chose the right client.
The program runs correctly now with all the variants.
Thanks a lot for your help (and sorry for the inconvenience).
Regards.

Similar Messages

Unable to generate csr, Please use a valid file name

I've been attempting to generate a new certificate signing request on our Exchange 2013 server. In the past we've never had a problem but we seem to be stuck today. When we try to output the new csr to one of our network shares we see the following
error.
"Please use a valid file name when you run the New-ExchangeCertificate cmdlet on server server1 with the -RequestFile parameter. The file should not exist in target folder. Parameter name: RequestFile"
We've use this share location before without problems, the Exchange Trusted Subsystem has write intermissions on this location as described online but we still receive the error. I've tried creating new locations but haven't had any success.
Any suggestions?
Thanks

Hi,
We can access the Exchange Certificate Management UI through the EAC in Exchange 2013 by selecting
Servers and then Certificates to create a new certificate to have a try.
Alternatively, we can try the following command:
$Data = New-ExchangeCertificate -GenerateRequest -SubjectName "c=US, o=contoso inc, cn=server.contoso.com" -DomainName mail.contoso.com, contoso.com, autodiscover.contoso.com -PrivateKeyExportable $true
Set-Content -path "C:\Certificates\MyCertRequest.req" -Value $Data
Regards,
Winnie Liang
TechNet Community Support

SOA Suite 11.1.1.6.0 Error - Please specify a valid JRE JDK location

I am very new to Oracle installations and I cannot get past the " Please specify a valid JRE/JDK location :" message when installing the SOA Suite.
I verified that all my prerequisites are in place.
No matter what path I enter, it ignores it and repeats the message. I made sure to install JRE in a directory path with no spaces. I have tried installing jre-7u9-windows-i586 and also jre-7u9-windows-x64. I also tried pointing the location to the jdk160_29/jre/bin directory created by the SOA installation (again, no spaces in my path). Nothing seems to work.
I am following the Quick Start Guide version 1.2 from August 2011 http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps4-459545.pdf. I also looked at various postings and blogs.
I am running this on a single Windows 7 Home Version SP1, 64-bit machine.
Here is the full message:
Starting Oracle Universal Installer...
Checking if CPU speed is above 300 MHz . Actual 3292 MHz Passed
Checking swap space: must be greater than 512 MB . Actual 2048 MB Passed
Checking monitor: must be configured to display at least 256 colors Higher than
256 . Actual 4294967296 Passed
Preparing to launch Oracle Universal Installer from C:\Users\Robij\AppData\Loca
l\Temp\OraInstall2012-11-20_09-46-59AM. Please wait ...
Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should e
xist : \middleware\soasuite\jdk160_29\jre\bin
Please specify a valid JRE/JDK location :
As I said, I'm new to this, so sorry for the newbie question. Can anyone help me? Thanks.

try this at commande ligne
cd c:\the folder wish contient the setup.exe for soa suite
setup *–jreLoc* c:\the jdk path directorie example(c:\oracle\midl…\jdk_18...hope that's help you
Good luck

Error: Please enter a valid combination of personnel area and subarea

A few days back the exact same procedure worked...
but today onwards getting error message.

Hi Praneeth/Sriram,
Thanks for your reply,PA &PSA combination is fine ,assignment also fine.but getting error.
Values
PA: A001
PSA:CX02
Regards,
Chandra.

Cannot edit any roles in CUP5.2 due to "Enter a valid Role Name" error

We are running CUP 5.2.
I am having a problem with our Roles after they were uploaded into CUP; I cannot make any changes to the Role Details because CUP returns an error stating that our Role Names are invalid.
First I uploaded the roles (I continued to receive errors when trying to use the template, so I did them by uploading with the "Selected Roles" option).
Once they were uploaded, from the menu, I select: Roles --> Search Role and then I choose a role from the resulting list. When the next screen appears (the "Role Details" screen), I added all of the respective details (Business Process, Sub-Process, Detailed Description, Role Approver, Functional Area, etc.). When I pressed the SAVE button, I received the following error:
Please correct the following errors:
Please enter a valid "Role Name". Only Alpha-numeric, Space or Underscore characters are allowed
So I realize what the problem is - the "Role Name" field is automatically populated with our security role name as it exists in our SAP system ... and because our security roles all begin with Z:, it does not follow the CUP naming convention.
I'd like to just update the "Role Name" field but when you are in the "Role Details" screen, the "Role Name" field cannot be edited.
I saw the "Export" button and used that, in an attempt to edit the file to replace each occurence of Z: with Z_, and then upload it again.
So I updated the file accordingly, and then did an upload, selecting the "Overwrite Existing Roles" box.
It returned a successful message:
Import Status: 133 successfully imported out of 133 records found
Yet, when I go back to the list of roles, the roles still exist as Z: instead of Z_ so I still cannot edit any of the roles to add the required details ... has anyone had a similar issue and know how to work around this?
Thanks!

Hello Alpesh,
Thank you for replying!
I had already tried to export the roles and replaced the Z: with Z_ before creating this message, but the upload attempts failed due to the explanation above. But this time, I followed your (good) advice to delete the original Z: roles first, before uploading the corrected file.
Sadly, even after I deleted the original Z: roles prior to uploading the corrected file, I am still having no luck ... when I uploaded the file, again it (falsely) reports that the import was successful:
Import Status: 133 successfully imported out of 133 records found
After seeing that message, I quickly checked the roles, and none of the roles had uploaded. So now I have ZERO roles.
Any further ideas? I am thinking it may be something very small that is being overlooked ... perhaps certain buttons must be selected/not selected on the import screen? Or could it be an issue with the file itself?
When I do the import, I only select the button for "From File ..." and retrieve the file from my desktop via the Browse button. I do not select any other button, nor do I make a selection from the System or Role Source boxes. I have just selected that one button only ... I've tried it with and without checking the "Overwrite Existing Roles" box, but neither one works.
The part that bugs me the most is that I receive what I perceive to be an inaccurate/bogus "successful" status each time I attempt the upload of the file. At least if I had an error message, I might have something to work with to troubleshoot this.

Please choose plants from one country only per PO (Here IN)

Hi,
I have created a PO for a plant with IN country.
I have deleted that line. Now i am adding a new line with another plant. This plant refers to US country.
System is not allowing to save and it is giving error message as below
Error:Please choose plants from one country only per PO (Here IN)
Message no. ME552
Can any one pls expalin why do i get this error even if i have deleted the first line. From where the country is getting refered and its throwing error inspite of deleting the first line.
Pls help
Thank you in advance.
Regards,
Radha

Hi Jurgen,
Thank you for your response.
Both the plants are created for the same company code.
One plant is with IN country and the other with US country.
And the company code is created with IN country and currency INR(T001)
Will this cause the error. Can you pls expalin.
Regards,
Radha

Please provide a valid Blackberry Smartphone PIN????

Ive been trying to get technical help for my facebook issue and when i go to put in all my info on the tech support page - i get an error:
Please provide a valid Blackberry Smartphone PIN
I know what my pin# is and it doesnt work!
Does anyone have any ideas what I can do?
Thanks,

"... your other thread."
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDeviceSoftware&message.id=5...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Enter the valid user name and password to login into the workspace

Dear Reader,
As we are working on System 9.2.0, the problem we are facing are as we log into Workspace we get a error "PLEASE ENTER THE VALID USERNAME AND PASSWORD TO LOGIN TO THE SYSTEM"; and the moment we access FR studio another error message pops up which says "COULD NOT CONNECT TO GSM SERVER HYPERION:1800" we have installed Hyperion BI/UI within the same folder and configured with same repository, Every service is successfully installed and configured, in the shared services we are able to see the BI+ node and we also have tried configuring the shared services and BI/UI , twice or thrice. Kindly suggest the solution for the same.

Hi Vikram,
Check whether your FR service is started and you database is up and running.
Regards,

Another SAPGUI Java (7.20) Variant Problem 'Choose a valid entry'.

Hi,
One of our client was running on OpenSuse Linux 11.2, and currently using the latest sapgui 7.10 and 7.20 (patch 5).
The problem was came out when we tried execute the report, we are unable to get the variant, as when we double click the variant, it will pop 'Choose a valid entry'.
See image below:
[Screenshot|http://i.imgur.com/BsLco.jpg]
Is there anyone encounter this ? and how to fix this ?
Current Java Version is 1.6.0 patch 25

Hello Meinolf,
that version has been tested on many OSes including the one you are using. I am actually running that version also on a MBP with 10.6.2. So you see me quite puzzled reading about your issues.
Would you mind to open a [support message|https://service.sap.com/message] on component BC-FES-JAV?
What we need in addition to your textual description above is:
A) for the first issue
1) Which theme you are using? In case it is "Signature Design", do you have the checkbox "Enable Signature Design window decoration" on? (Please refer to Preferences -> Theme)
2) Before doing the first connect, please go to the File->Trace menu. There enter a file name and turn on the main switch and press "Apply".
Then try to connect to a system. Go back to the trace window, press the "Component Tree" button. In the new window should be a hierarchy of objects. Select the item "GuiMainWindow" and press the button "Dump Component Tree".
Then press button "AWT Tree". In the new window, click the first item (SAPFrame) and press the button "Dump Tree".
B) for the second issue:
0) keep tracing enabled, do not delete the trace file from A)
1) select a connection and press the "Edit" button
2) make a screen-shot of the error message
3) Attach following files from your <home>/Library/Preferences/SAP folder:
- connections
- settings
In case your are referencing a configuration file, we also need this one and those which are eventually referenced by the configuration file
For A) and B) please attach the resulting trace-file to the support message.
Then we should have enough information to track down the two issues.
Thanks for your help and best regards
Rolf-Martin
P.S.: To the audience: Is there someone else having the issues Meinolf described?

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Error messege in Background Job(SM37) - Please enter a valid date

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,Because this datein the past

Order Import failing with error "The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory."

Hi All,
I am getting this error while importing an internal sales order.
“The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory.”
I have tried to set mentioned profile as ‘Yes’. But still getting same error.
Also, provided subinventory is present and active in given inventory organization.
Please share if anybody encountered this before and have a solution.

Hi 2878342
Please refer the following metalink note, it should resolve your problem.
Order Import Interface.Error Message Specified Subinventory Is Invalid To Use (Doc ID 406411.1)

I am trying to change my Apple ID. Try to do this I keep getting an error message saying 'This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.' The email address

I am trying to change my Apple ID. Try to do this I keep getting an error message saying ‘This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.’ The email address that I want to use did use to be my recovery email but I have changed it, so that address is no lonegr associated with my account. I do not understand why I cannot use it as my Apple ID now. Can anyone help?

Contact iTunes customer support for assistance.

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

Error Message during PO GR - Please enter a valid transaction Type

During the goods receipt movement 1010 of a Purchase Order, I am getting following error Message:
"Please enter a valid transaction Type"
I am not a Purchasing expert. Could please help?
Thanks and regards.

Hi,
Pl do below 2 things:
1 ) Go to Transaction code = OMBA , Click on Goods receipt Documen type button and check whether MIGO_GR is assigned to DOC Type = WE
2 ) Go to Transaction code = OMJJ , Tick Movement type and select 101 Movement type .
Then You need to click on "Allowed Transaction option ( Left pane ) and see whether transaction code MIGO is mentioned for Movement type 101.
it should solve ur problem.

[Redwood] Abap_run error : Please choose a valid variant name

Similar Messages

Maybe you are looking for