Redwood Cronacle - dynamic variants

Would like to better understand dynamic variants.  I have looked in Cronacle on-line help and cannot find anything there.  Only information I have is that is needed to run RSI_GENERATE_VARIANT and then in a job chain...
   step 1 to set the variant using generated script and
   step 2 to executes the ABAP using template or imported script
Would like to obtain better understanding of what situations one would use dynamic variants in and maybe short list of steps to do to acccomplish same.
Best Regards,
Dean Atteberry.

Hello Dean,
Yes indeed, there is no help available for dynamic variants in Redwood. Dynamic variants are those variants that are dynamically picked up from the SAP database. They are supposed to be automatically generated nightly via job RSI_GENERATE_VARIANTS. Unfortunately in Redwood, it often fails on individual jobs.
Regards,
Atul Lotlikar

Similar Messages

  • Import job RSI_IMPORT_CCMS_JOBS is not working in Redwood Cronacle

    Hi,
    We are facing problems in the redwood cronacle, where in the standard import job RSI_IMPORT_CCMS_JOBS is not working. When ever we are running the script, the status of the import job goes to waiting and never gets completed. When its killed and re-run it again moves to waiting status.
    Cronacle version : 7.0.4.2. Hope some one will help me out to solve this issue.
    Thanks,
    Arun Raghavan

    Hi,
    as mentioned by Anton in his previous post, the import of abaps and variants is a kind of nice to have that CPS does for you.  The import of abap and variant data enables CPS to create a Script with the defaults all set and ready for you to submit.  Having this data in CPS also means that when you submit your CPS SAP Script the parameter values for instance,client, abap,variant will only be a valid combination.  If you remove the Script Parameter constraints for your CPS Script then you can submit your own Script (using a copy of RSI_ABAP_RUN or RSI_ABAP_RUN_PRINT but with the param constraints removed) with whatever values you like.  If you enter a valid combination the SAP job will run.  If invalid you'll get an error when trying to submit in SAP.  Obviously the parameter constraints ideally are there to prevent this second scenario.
    In terms of why the import of variants seems to hang; you haven't got variants begining with '&' have you?  CPS doesn't like these 'dynamic' variants.  I have had problems in the past where this is the case.
    Regards,
    Simon

  • How to set up Dynamic Variants for job which is based on Pay Period

    Hi,
    We need to set up dynamic variant for payroll interface.  This interface is based on Pay periods and that is why we need to use different variant for each month.  Letus know how to set up dynamic variant which will take care of Pay Periods

    Hi,  Thnx for reply.
    We are not changing the control records, current period will be some old period in system. 
    payroll is not processed in SAP,

  • Using dynamic variants in ABAP

    Hi,
    I have an issue. I want to use dynamic variants in my program. On the selection screen of my program, I have a parameter called Planning date which takes in the current week of the year as input value, i.e lets say today we are Monday 14th of May 2007, so the current week is 20. I want to make this parameter dynamic, i.e to change automatically so that next week the value is week 21.
    Also is setting dynamic variants version dependent? My version is 5.0 SR1 and I don't have the option of save my variant using the 'D' traffic signal.
    Please help me out.
    Thanks

    Hi,
    you can fill your parameter in the initialization event of your report. In order to get the week you can use the function DATE_GET_WEEK.
    Kostas

  • How to create a multipage PDF with same template but dynamically varying data?

    Hello,
    I need to create a multi-page PDF where I need to use the same template but dynamically varying data.
    Eg Scenario:
    1. I have data for 5 material in my ABAP program.
    2. I have a PDF template in SFP which has a 2 page structure.
    3. Based on the number of materials (5 in this case), I need to generate a PDF which will have 10 pages (2 for each material).
    4. the generated PDF should be like the one shown below:
    e.g.  MATERIAL_PDF (pdf name)  
          |  Page1(Mat1[View1].data)
          |  Page2(Mat1[View2].data)
          |  Page3(Mat2[View1].data)
          |  Page4(Mat2[View2].data)
          |  Page5(Mat3[View1].data)
          |  Page6(Mat3[View2].data)
             .. and so on...
    Thanks,
    Aniket

    Isn't it just by setting the two pages into a form ( like an subform in the content ) and put the settings in a proper way?
    There is this setting, that the masterpage comes up everytime the pagecount is done.
    Example
    Page 1 3 5 --> Masterpage 1
    Page 2 4 6 --> Masterpage 2
    And the designview with the flowing data, you can do it by scripting to get to the next page after the pos is finished.
    Unfortunaly I do not got a system atm, so I hope the explaination give you a clue, where to search.
    Regards
    Florian

  • How to set a dynamic variant for date in select-options in the upper field

    Hi  Variant experts Good Evening!
           I have the following problem while setting up a dynamic varinat .
    Ex: select-options: dat for sy-datum.  
    I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
    Regards
    Ravi.

    i hope dynamic variant concept is not there,
    but u can use the fn module DYPRO_GET_VALUES  and
    DYNPRO_SET_VALUES
    DYNPRO_GET_VALUES gets the values in the screen,
    DYNPRO_SET VALUES sets the values.
    first get the values, compare and set the values as u want

  • Dynamic variant create for select option High value

    Hi ,
    I would like to set a dynamic variant for Date filed in selection screen as lower limit as 01/01/2009 and Last day of previous month as hiher limit. For examplae: Lower limit = 01/01/2009 and higher limit as 02/28/2011.
    Please help me in creating dynamic variant as mentiond above.
    Thanks & Regards,
    Venkat N.

    Hi,
    Thank you for your reply and could you please provide if you have any code.
    Thanks & Regards,
    Venkat N.

  • Dynamic Variant in ECC 6.0

    Hi All,
    Can any one tell me how to create a dynamic variant in ECC 6.0 for a exicutable program? In ECC 5.0 its easy to create but in ECC 6.0 the varinat creation screen has been changed.
    Thanks
    Manas

    it's buried in there
    this thread may help if you need to define custom variables
    Re: CASH SALES
    you'll see it under the variant attributes screen.  i know people get reluctant to choose something from a grayed out field but you will be able to choose a selection variable and then the name of the variable
    so for a date field you could choose say D and Previous Month

  • Create dynamic variante in report

    hello masters, im trying to create a dynamic variant for a report, im following the instructions of document that exists in <blocked site removed by moderator> but the option D- Dynamic date calculation doesnt appear to me in the field that i want to calculate date... the field it is of type S - selection-option... someone have any clue that could be.
    regards and thanks in advance
    Mario
    Edited by: Thomas Zloch on Jul 11, 2011 2:34 PM

    hello Alvaro, thanks for your answer.
    you are right, my field isnt DATE it is CHAR.
    thanks for your help.
    Mário

  • Dynamic variant at job - selection options

    Hi Experts,
    Could any of You pls help me to find out the original selection for a job, if the selection variant was not saved previously?
    There are a couple of user report, which could be run at the background with an ad-hoc selection variant, such as RM07DOCS (MB51). Here the user could set the actual selection and run the report at background by creating a job. But in this job the selection variant has a dinamic identification code such as &0000000000001.
    After the job is set, run and have a result, I could find no way to check what had been the original selection represented by this varian code.
    Is there a way to find out what was the selection for the job, if I only have a dynamic variant parameter?
    Answers will be appreciated

    thanq.
    and pls. let me further clarify that,
    programitically am populating the date as current date minus 1 in the field of my_date in the selection screen.
    now, they wanna to run the report in back ground, daily.
    now, I followed ur tip/link and saved with_date_variant, fine.
    so, pls. let me know that,
    1) if the report runs in back ground tomorrow with with_date_variant(which is i created by seeing ur link), Is the selection screen my_date(prog. populates as June 5th) will be override with current date(i.e. June 6th)?
    In broad, Is the selection criteria wuld be over writes with the Dynamic varints?
    thanq

  • Dynamic variant calling multiple screens

    Hi all,
    The concerned issue is that i am trying to execute a report( which on execution throws a selection screen) from a program using 'submit' statement passing a variant. along with it iam creating a dynamic varinat using FM RS_CREATE_VARIANT, the variant is being made, but on execution , the program throws an error meassage " invalid variant called'.
    This is because the varinat is calling multiple screens , although only one screen number is passed in teh FM,( screen no 0170).
    Please tell me the possible solution fr this .
    Cheers,
    Thanks in advance.

    Hi,
    first try to pass only the static variant with the submit statement and c whether its working properly.
    and than check for dynamic variant..
    c the difference and let me know what happens ??
    thanks
    ravi aswani

  • Dynamic variant calling multiple selection screens

    Hi all,
    The concerned issue is that i am trying to execute a report( which on execution throws a selection screen) from a program using 'submit' statement passing a variant. along with it iam creating a dynamic varinat using FM RS_CREATE_VARIANT, the variant is being made, but on execution , the program throws an error meassage " invalid variant called'.
    This is because the varinat is calling multiple  screens , although only one screen number is passed in teh FM,( screen no 0170).
    Please tell me the possible solution fr this .
    Cheers,
    Thanks in advance.

    Hi,
    first try to pass only the static variant with the submit statement and c whether its working properly.
    and than check for dynamic variant..
    c the difference and let me know what happens ??
    thanks
    ravi aswani

  • Dynamic variant date range

    Hi experts,
    i need to create dynamic variant for date range (so_date-low, so_date-high): sy-datum-1.
    that will bring the data in the report for yesterday.
    How can i do this?
    i know how can i make variant for so_date-low
    i dont know how can i do that on so_date-high.
    thanks,
    Michal.

    1. Execute the report and you will get your selection screen then press save
    2. system will take u to variant screen , select the line of your date select-options field from the list and scroll right
    3. double clik on "selection variable " column and select "D"
    4. double clik on "Name of variable" last column and select "Current date - xxx,current date + yyy" system will provide you popup with "Enter a value xxx" and "Enter a value for yyy" and enter value 1 in xxx and 0 in yyy
    and save the variant . now your S_DATE_LOW will be system date - 1 ie yesterdays date

  • Dynamic variant

    hi all,
      i created a report and that report has to be execute in back ground daily with variant,but my report contains some date field, so i need to change the date value in that varient,how can i do it.How can i create dynamic variant,could you please help me.
    regards,
    Bujji.

    Hi Murali,
    You can do this in the variant itself.
    Please follow these steps
    1. Enter the values in the selection screen
    2. Save the variant using the SAVE button
    3. In the next screen for the date variable select the 'Selection variable' checkbox (L) and click on the button 'Selection variable' in the toolbar.
    4. Now you will see this variable in the next screen with 3 types of buttons. Click on the middle button (ie. D - Dynamic date calculation).
    5. Click on the down arrow button and select the option 'Current Date'.
    6. Save the variant.
    Kindly assign points if this is helpful.
    Cheers
    Vinod
    Message was edited by: Vinod C

  • Dynamic Variant for Date filed

    Hi All,
    I need to create a dynamic variant for date fields for standard report.
    in date Low field...value will be harcoded as '01.01.2011' and S_Date-high date field should be current date - 1.
    I dnt want to go for code in report to handle this.
    I tried with many option but could not able to see up the dates like as above.
    Kindly help.
    Piyush

    Hi,
    try this code
    data prevday like sy-datum.
    SELECT-OPTIONS s_date for sy-datum DEFAULT '20110101'   .", sy-datum-1.
    INITIALIZATION.
    AT SELECTION-SCREEN OUTPUT.
    *  S_DATE-HIGH = PREVDAY.
      prevday = sy-datum.
    s_date-high = prevday.
    modify s_date index 1.
    Hope the help
    Edited by: j.ortiz on Jan 27, 2011 3:01 PM

Maybe you are looking for

  • Find the frame number of a label?

    Is it possible to find out the first frame of a label without going there then put it in a variable in AS2 or AS3? Thanks for the help,

  • Trouble invoking Axis service with multiple parameters

    Hallo Java experts, I have a problem with Axis 1.2RC2 (and Tomcat 5.0.19, JDK 1.5, Win XP) that might be quite simple, but I'm not so experienced and running out of ideas. Everything works fine as long as I use a single Parameter. But I can't invoke

  • Cs6 and Business Catalyst

    Is BC a part of cs6 or not?  I had to do an offline activation for cs6 and now have same cannot connect error when starting BC?  Do I have to do an offline activation for it too?

  • Need Automatic Lead-time scheduling in Planned Order using MD11

    All, Our users have a requirement that when they create a planned order using MD11, they would like system to do automatic lead-time scheduling based on the "basic finish date" entered by the user. Currently the system is taking 3 days from the in-ho

  • CRM 5.0 Internet Sales B2C Logon is Invalid

    I have successfully configured CRM Internet Sales B2B and B2C. I am able to log into B2B but not B2C. The B2C app seems to work fine except when you try to log in. The error is "Logon is Invalid; check your entries". I haven't been able to find a goo