Reenabling Previous Versions after being disabled for an extended period

Have a server that was in-place upgraded from 2008 r2 to 2012 r2. Went a few months before I realized that during the update Previous Versions settings did not come across. Looks like the old shadow copy is there but not active. Is it safe to just reenable
Previous Versions on the volume in question?

Hi,
I would like to confirm what is the current situation? Have you resolved the problem?
If there is anything that we can do for you, please do not hesitate to let us know, and we will be happy to help.
Best Regards,
Mandy
If you have any feedback on our support, please click here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I have just restored my ipod touch after being disabled. Now it is asking for pasword, can I cancel this so I don't have to use a password?

I have just restored my ipod touch after being disabled. Now it is asking for the passcode? I still cant remember the passcode. How do I go past this?

You'll have connect in recovery mode and set it up "as new ipod" http://support.apple.com/kb/HT1808
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.
copied from http://support.apple.com/kb/HT1212

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

HT1212 i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years

i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years. Idk what to do so i can access my ipod.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Malicious TornTV add-on continously returning after being disabled- How do I fix this?

I've been having issues with an add-on to my browser by TornTV that continuously returns after being disabled via the link provided on the ads it invasively opens and via the Add-on Toolbar. I've done the process many times and even sent a formal request to the TornTV website to stop after discovering I cannot remove it permanently only to receive no answer or conclusion.
It wouldn't be such a big issue were these ads not slowing my browser considerably, crashing it entirely, or generally getting under foot while I'm doing work on the internet; I was just hoping that you might perhaps have a solution to this issue.
Thank you very much!

hello, please try to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] which are specialised in removing adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]]

How do i force a guest account to Auto log off after being inactive for a period of time?

I have a 2010 21" iMac running OS X Snow Leopard (10.6.8) in a hotel's guest lounge. I want to have it log off of the guest account after being inactive for 5 mins so that it clears the session info if the last person who used it did not log off when they were done (***this happens very often***).
I tried using the "System Preferences > Security> Log off when inactive for X minutes" option but this brings up the "Delete files and log off" dialogue which unless someone makes a selection just stays there and doesn't timeout, essentially stopping the logoff process.
How can i bypass that dialogue and force the system to log off the Guest User to avoid any issues with other guest seeing info from the previous user?

Hi daniel,
I don't believe it's possible to do what you want, unless someone could write an Applescript for it. I suspect the best route for now is the old fashioned way, paper and marker, warning guests to log off or their info will be public.

FIM Sync service keeps restarting after being disabled

Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
What is starting this service? How can I stop so that it remains in the disabled state?
Thanks
J

Hi,
Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
I suggest you start the FIM Sync service again and stop it, then disable it.
You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
Stop the FIM Sync service and then disable it.
Here are two links, you can use as a reference:
http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Revert to previous version after update

How do I revert iTunes to a previous version after an update; I don't like the fact that they changed it to strictly a player-only and one cannot access things like the Radio stations, etc. any more.

I'm looking for a way to go back as well. With each new rev, iTunes becomes ever more nebulous.
I still burn CDs...but the new version makes this difficult.
In past versions of iTunes, the total time of a playlist was shown in the Status Bar and could be toggled from a rounded total (e.g."1.2 Hours") to an exact total (e.g. "1:20:23")
In 'the new itunes', the total time length of playlists seems permanently fixed ion the broad value only. (e.g. 1.2 hours).
This is terribly inconvenient if one is going to be burning a Playlist to a CD or DVD-A. Where 79 minutes would fit on a CD, 81 minutes will not.....yet 'the new itunes' will show both only as "1.2 Hours". Very inconvenient if one is now to be forced to manually add track times together in order to decide if a playlist will fit or not.
How do I get 'the new itunes' to show me a more useful total? Or has Apple now decided that we aren't going to burn CDs any longer? (Surely, by now you can figure out on your own what my opinion of that might be.)

SQL Developer hangs for a few minutes after being idle for a while.

Is anyone aware of any issues with SQL Developer hanging for several minutes after being idle for several hours? After being idle for several hours (and probably minimized), when we bring up SQL Developer we just get a blank white window for several minutes before it becomes functional. Obviously, this isn't a critical issue, but sure is annoying when you run into it.
Thanks in advance!!
Rob

This is fairly typical java application behaviour. For whatever reason, they are particularly prone to being swapped out by the operating system and take time to swap back in.
There is an add-in around called "keepresident" which helps this but I thought it had been superceded in later JDK version.

Purchased 2 iphone 5's. Both have cracked the screen in the first week. Never had this problem with the previous versions iphones being so fragile.

I purchased 2 iphone 5's. One for my husband and one for me. Both have cracked the screen in the first week. I even have a case on mine. Never had this problem with the previous versions iphones being so fragile. Has anyone else experienced this?

Tests by some of the web sites and magazines claim that the iPhone 5 is in fact more rugged than previous models. That doesn't obviate the possibility of an assembly defect that would make yours more susceptible to damage, but if you dropped or impacted them and they cracked, then your warranty will not apply and you'll have to pay for replacement, either the AppleCare+ "deductible", if you purchased AppleCare+ with your iPhone, or Apple's normal out-of-warranty replacement charge.
You can of course make an appointment at an Apple Store, explain the situation, and hope that there's something they can do for you. Don't count on it, though.
Regards.

My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
Does this mean that my phone battery is dead?
Is there anything else I can do??

How do you get your Apple ID unlocked from being disabled for security reasons?

How to get your apple account back from being disabled for security reason , I've reset my passcode many times and it still hasn't let me update any of my apps on my phone !

Hello there, Chrissysanders17.
It sounds like you're receiving the message “This Apple ID has been disabled for security reasons” when trying to update apps on your iPhone. The following Knowledge Base article reviews steps for resolving the situation:
If your Apple ID has been locked - Apple Support
If you've already performed the steps mentioned here, then this recommendation may be practical in your case:
If you can't reset your password and you don't use two-step verification, contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Images burn into the screen after being there for only a few minutes?

What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

My screen is really faded, after it shut down (overheated I think) after being on for about an hour.

My screen is really faded, after it shut down (overheated I think) after being on for about an hour. Its kind of like how you see the world, when you get out of a pool that has too much chlorine.
I have tried shutting down, and re-starting. I have re-calibrated.
I have tried changing brightness.
Nothing works so far.
HELP

Wait a few hours before restarting it, also post actual temps. You can download iStatPro for free, once you have restarted, download it and post the actual temps.
Also try resettng the PRAM and SMC, do each multiple times. If you don't know how please click Intel iMac SMC and PRAM resets

Slatebook 14 at 96% after being off for a night.

Hi once again:
I just recieved my Slatebook 14 two days ago.
Runs like a top and I LOVE IT!!!
But I have one question.
As I asked in my subject line, Is it normal for it to be at 96-98% after being shutoff for a night?
It does go to a FULL CHARGE after being on for 10 or 15 minutes.
I had one ither tablet that did something like this, And I was just wanting to make sure it was normal for this one as well.
Thanks in advance. Ricky
This question was solved.
View Solution.

I have been doing it as in the first one.
Holding down until it says Power Off and then Selecting the Power Off option.
If that is what you mean by the First Option?
I know that it has to be shutting off at least from the Factory, Or the battery would've been completely drained when I took it out of the box, At that time it was at like 80%
But I know that is normal when first coming out of the box.
Now I just thought of something.
I have shut it off with it still plugged into the Power Pack although it's not getting power through an outlet at the time because I have it on a cart.
Could this be it?

Reenabling Previous Versions after being disabled for an extended period

Similar Messages

Maybe you are looking for