Ref Code S0a00

WTTW channels have been "available shortly:" for two days with Ref Code S0a00. What does this mean?

"One Moment Please, Available Shortly, Ref code S0a00" and similar messages are generated by the cable box when the signal for the channel you are trying to watch is not usable. This might be because of a problem at Comcast (check https://customer.xfinity.com/Secure/MyServices/) or a bad box, but is most likely due to a poor connection between the box and Comcast's network.
Troubleshoot by checking all connectors and looking for damaged coax cable. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. You might also try unplugging the cable box/DVR/digital adapter power cord for a minute or so.
If you can't find the problem, call them at the phone number on your bill or 1-800-Comcast and ask them to check the account setup and send a refresh signal to the box. If they can't fix the problem during the phone call, insist that they send a tech out to identify the cause and correct it.
If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit unless you have their Service Protection Plan (http://www.xfinity.com/spp/, about $5/mo). If the trouble is due to a faulty Comcast cable box/DVR/digital adapter or anything outside your home, you shouldn't be charged.
For additional information please see Pixelation, video and audio dropouts, One Moment Please S0a00 messages.

Similar Messages

Error ref code: tuMfkgFG8GvC0T4olRZOeA

Hi!
We are getting this error code in Adobe forms questionnaire we created whenever a user hits the "Save" feature button
Unable to send form link
error ref code: tuMfkgFG8GvC0T4olRZOeA
Can someone please help?
The form is online and located here: http://systemise.com.au/web-design-questionnaire/
You can try and replicate.
Thank you!
Tony

Your form data has been saved.
Please click the button within 7 days to complete and submit your form:
Retrieve Form
or click on the link below:
http://systemise.com.au/web-design-questionnaire/#_%40%40rdd%3DjjPI0XSCKCDMvdp7549HEABwFDd Vr3DRbbeEuM7ZdMfXrMHbITayg40f2hjY8whWA
If you cannot access this link, copy and paste the entire URL into your browser.
Note: After 7 days your saved form will be discarded.
So I clicked the link then it will just pop on the screen and I cant do anything on the form!!!

Type X conversion In Overlay statement(Refer code)

Hi all,
Following are the lines of code where we are getting an 'Type X' error in the system, the exact error description is 'REPLSET is not (of type C, N, D, T)'
PLEASE REFER THE RELEVANT CODE BELOW----
>
DATA: BEGIN OF REPLSET,
LINE0(16) TYPE X VALUE '000102030405060708090A0B0C0D0E0F',
LINE1(16) TYPE X VALUE '101112131415161718191A1B1C1D1E1F',
LINE2(02) TYPE X VALUE '2227',
LINE7(01) TYPE X VALUE '7F',
LINE8(13) TYPE X VALUE '8182838485868788898B8D8E8F',
LINE9(14) TYPE X VALUE '909192939495969798999B9D9E9F',
LINEA(11) TYPE X VALUE 'A0A4A6A8A9AAABACADAEAF',
LINEB(15) TYPE X VALUE 'B0B1B2B3B4B5B6B7B8B9BABBBCBDBE',
LINED(01) TYPE X VALUE 'DF',
END OF REPLSET.
Transfer Variables
DATA: SREP(4000) TYPE C.
DATA: BEGIN OF B0004 OCCURS 1,
CHECKTABLE LIKE DD08VV-CHECKTABLE,
FORTABLE LIKE DD08VV-FORTABLE,
FORKEY LIKE DD08VV-FORKEY.
DATA: END OF B0004.
LOOP AT B0004.
OVERLAY B0004 WITH SREP ONLY REPLSET.--> Error
CONCATENATE
B0004-CHECKTABLE
B0004-FORTABLE
B0004-FORKEY
INTO TRANSREC
SEPARATED BY TRANSSEP.
PERFORM TRANS.
ENDLOOP.

Hello Kunal,
your solution
DATA: BEGIN OF replset,
        line0 TYPE c LENGTH 32 VALUE '000102030405060708090A0B0C0D0E0F',
        line1 TYPE c LENGTH 32 VALUE '101112131415161718191A1B1C1D1E1F',
        line2 TYPE c LENGTH 4 VALUE '2227',
        line7 TYPE c LENGTH 2 VALUE '7F',
        line8 TYPE c LENGTH 26 VALUE '8182838485868788898B8D8E8F',
        line9 TYPE c LENGTH 28 VALUE '909192939495969798999B9D9E9F',
        linea TYPE c LENGTH 22 VALUE 'A0A4A6A8A9AAABACADAEAF',
        lineb TYPE c LENGTH 30 VALUE 'B0B1B2B3B4B5B6B7B8B9BABBBCBDBE',
        lined TYPE c LENGTH 2 VALUE 'DF',
END OF replset.
Bye,
Peter

StorageTek v2xf ref code 3663-31A1-001A

Is someone here able to confirm that I need to replace the IFF3 card in this unit? here is the Troubleshooting that was done
1 Detached Operator Panel which runs on a PC and allows info on the status of the Virtual Storage Array to be obtained.
The only problem it shows is under Subsystem Availability where the Control Regions is 75% instead of 100%. Eric indicated this happened when the errors started to occur.
2) I removed the cover to the configurable cards. One card had a red led lighted indicating an error. The card was IFF3 which was one of 4 IFF cards in the system. The other dozen or so cards did not have any error lights.
3) I found in the docs where the error code format is documented. Using one of the errors in the listing this is what the codes means.
*IEA480E 0A40,SCU,SERIOUS ALERT,MT=V2XF,SER=0420-10050, 127
127 60008000 REFCODE=3663-31A1-001A,SENSE=50901000 00008FE0 22900031
A1001A10
IEA480E indicates this is a MVS (Multiple Virtual Storage) SIM (Service Information Message) alert
0A40 is the channel or unit address (the I/O address) of the failing functional storage control SCU is Storage Control Unit which indicates that a fault requiring service has occurred in the non-cached part of the hardware SERIOUS ALERT is severity of error MT=V2XF is machine type of reporting unit
SER=0420-10050 is serial number of reporting unit REFCODE=3663-31A1-001A identifies a reference code that provides additional information about the fault or error. The 3663 is the Fault Symptom Code (FSC) and the rest provides information about the subsystem and the location of the error
4) The Detached Operator Panel can be used to look up the FSC but when I tried to do this the panel hung and was not able to get any info.
In summary I believe the problem to be the IFF3 card but would need the FSC info to verify this.
the iff3 card is on thie diagram, a part# would be helpful too http://docs.oracle.com/cd/E19475-01/CRCM1511/CRCM1511.pdf
Edited by: 947838 on Jul 24, 2012 11:27 AM

S0A00 on TCMHD 701 for TWO MONTHS!

I'm at my wit's end with this. For more than two months this channel, which is the ONLY reason I have Digital Preferred package, has been unavailable with the S0a00 ref code. Every time I call or chat I get a different answer, which always comes to nothing. The agent, who barely speaks English, says "we will send an agent out to your house Thursday from 3-5." But of course they don't, nor do I get a phone call. The next time I call, the agent says "oh, that's not correct, we will never send a tech out on a single channel problem, let me have someone call you". But of course no one ever calls. Today I tried the online chat. Same thing: the agent lied his pants off. He said "that channel is not available in your area". That's RIDICULOUS: the channel has always been in my lineup, and I still get the program info, what's playing, schedule, etc. Just no picture or sound. The agent then said "try this number" and gave me a number that just goes to the regular phone intake that I've called a half-dozen times in the past week. The first time I agreed to do the survey the call came AFTER MIDNIGHT and woke me up. No one ever calls back. No one ever has even a glimmer of a suggestion as to how to solve the problem. No one at Comcast cares AT ALL.

Steve Thornton wrote:
I'm at my wit's end with this. For more than two months this channel, which is the ONLY reason I have Digital Preferred package, has been unavailable with the S0a00 ref code. Every time I call or chat I get a different answer, which always comes to nothing. The agent, who barely speaks English, says "we will send an agent out to your house Thursday from 3-5." But of course they don't, nor do I get a phone call. The next time I call, the agent says "oh, that's not correct, we will never send a tech out on a single channel problem, let me have someone call you". But of course no one ever calls.
Today I tried the online chat. Same thing: the agent lied his pants off. He said "that channel is not available in your area". That's RIDICULOUS: the channel has always been in my lineup, and I still get the program info, what's playing, schedule, etc. Just no picture or sound. The agent then said "try this number" and gave me a number that just goes to the regular phone intake that I've called a half-dozen times in the past week.
The first time I agreed to do the survey the call came AFTER MIDNIGHT and woke me up. No one ever calls back. No one ever has even a glimmer of a suggestion as to how to solve the problem. No one at Comcast cares AT ALL.
Apologies for the issue and the experience that you described above. This condition can and should be corrected. The link below provides some general information on this condition:
http://forums.comcast.com/t5/XfinityTV-and-Equipment/Pixelation-video-and-audio-dropouts-One-Moment-Please-S0a00/td-p/2361331
To be clear, for video issues with the TV signal like what you described above, it is almost always a local signal issue, bad cable, amplifier, splitter or outside the home issue.
In reviewing your account, I do see a scheduled technician visit for Thursday afternoon so that we can get this issue identified and resolved. Please let us know how that tech visit goes.
Thanks for your patience.

Code Generation Bug in Forms 10g

We're hitting this goofy bug in Forms 10g (also occurs in 9i) code generation of the On-xxx triggers. I have an "obj" package that declares an index-by array type that's used by multiple packages, including a "qry" package and "dml" package (in good ol' Steven Feuerstein tradition). The On-xxx triggers pass this type into packaged procedures that perform the Insert, Update, Delete and Lock required by Forms. These DML routines are in the "dml" package.
When we look at the generated trigger code, we see that the index-by array type is incorrectly referenced as dml.obj.idx. That is, since the On-xxx trigger is calling DML routines in the "dml" package, it's improperly qualifying the reference with the dml package name. The On-xxx trigger code gets regenerated every time we do Compile Module. We tried doing Compile All, which doesn't regenerate the On-xxx triggers; but neither does it produce an fmx file.
Is this a known bug, and is there a workaround? I can't move the index-by array type declaration to the dml package because it's used by multiple packages. If I fix it in one place, I break it in another. I can't have multiple declarations of this type in multiple packages either, because I'm passing it around between the packages, and they're not type-compatible at that point.

It looks like the Forms Wizard is the real culprit. When we looked at the Property Palette for each On-xxx trigger, where the target procedure is specified, along with the parameters, is where the malformed dml.obj.ref code appears. Once we edited those entries, the On-xxx triggers generated correctly.

Auto generation of Item Code And Business Partner

Hello All,
My client want to create Auto generation of Item Code And Business Partner with some prefix value.
Thanks
Deepak

Hi Dipak Patel,
i created BP code by BP Group use FMS . you can refer code.
declare @temp as char(20)
IF $[OCRD.GroupCode] =100
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =100) and (len(CardCode)=8))
set @temp='C11'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 102
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =102) and (len(CardCode)=8))
set @temp='C12'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 103
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =103) and (len(CardCode)=8))
set @temp='C13'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 104
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =104) and (len(CardCode)=8))
set @temp='C14'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 101
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =101) and (len(CardCode)=8))
set @temp='V11'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 105
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =105) and (len(CardCode)=8))
set @temp='V12'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 106
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =106) and (len(CardCode)=8))
set @temp='V13'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 107
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =107) and (len(CardCode)=8))
set @temp='V14'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 108
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =108) and (len(CardCode)=8))
set @temp='V15'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 109
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =109) and (len(CardCode)=8))
set @temp='V16'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.GroupCode] = 110
BEGIN
set @temp=(select isnull(max(right(CardCode,5)),0) + 1 from OCRD where (GroupCode =110) and (len(CardCode)=8))
set @temp='V17'+isnull(replicate(0,5-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
thanks
H2

My Apple Diagnostic Reference code is: 4HDD/11/4000000:SATA(0,0). What do i do next?

I have run a diagnostic test, which returned the ref. code: 4DD/11/4000000: SATA(0,0). But this code does not appear in the code list.
Have any other had the same experience? What do I do now?

See this thread:
https://discussions.apple.com/thread/4023442?tstart=0
Looks like a HDD failure .

XML Publisher CLOBS Help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Can someone please help ..
I am trying to display a clob field that contains just random text but when i run my xml definition on concurrant manager xdodtexe the field is displayed as blank,
Does anyone know how i can display this clob field on my report template or is there a way to display it through my xml template using some kind of function... in the sql
I am just selecting 4 Clob fields from a oracle table.
xml publisher 5
Oracle Apps 11
Cheers
Sharky

Yeah simple select in xml definition file as below - Im getting a error when using getclobval()
Error Not an object or Ref - Code Ora-22806
Any Ideas
-- start of code
<?xml version = '1.0' encoding = 'UTF-8'?>
<dataTemplate name="VAC_ADVERTISED" version="1.0">
<parameters/>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT   iv.vacancy_name,
pv.attribute_category vacancy_type,
         iv.professional_area,
         iv.number_of_openings,
         iv.grade_name,
         TO_CHAR (pra.date_start, 'DD-MON-RRRR') VACANCY_START_DATE,
         TO_CHAR (pra.date_end, 'DD-MON-RRRR') VACANCY_END_DATE,
         ipcv.job_title, ipcv.org_name,
         hra.derived_locale LOCATION,
         hl.meaning route_area_teri,
         hl2.meaning grade_band,
         iv.recruiter_name,
         iv.manager_name
        , ipcv.org_description.getClobval() DEP_DESC
        , ipcv.brief_description.getClobval() BRF_DESC
        ,ipcv.detailed_description.getClobval() DET_DESC
         ,ipcv.additional_details.getClobval() HTAI
    FROM ircfv_vacancies iv,
         per_vacancies pv,
         per_positions pp,
         per_position_definitions ppd,
         per_jobs pj,
         per_job_definitions pjd,
         per_recruitment_activity_for praf,
         per_recruitment_activities pra,
         irc_all_recruiting_sites iars,
         irc_posting_contents_vl ipcv,
         per_recruitment_activity_for praf_ext,
         per_recruitment_activities pra_ext,
         irc_all_recruiting_sites iars_ext,
         irc_search_criteria isc,
         hr_lookups hl,
         hr_lookups hl2,
         hr_lookups hl3,
         hr_locations_all hra
   WHERE iv.vacancy_status = 'Approved'
     AND pp.position_id(+) = iv.position_id
     AND ppd.position_definition_id(+) = pp.position_definition_id
     AND pj.job_id(+) = iv.job_id
     AND pjd.job_definition_id(+) = pj.job_id
     AND praf.vacancy_id = iv.vacancy_id
     AND praf.recruitment_activity_id = pra.recruitment_activity_id
     AND pra.recruiting_site_id = iars.recruiting_site_id
     AND pra.posting_content_id = ipcv.posting_content_id
     AND iars.internal = 'Y'
     AND praf_ext.vacancy_id = iv.vacancy_id
     AND praf_ext.recruitment_activity_id = pra_ext.recruitment_activity_id
     AND pra_ext.recruiting_site_id = iars_ext.recruiting_site_id
     AND iars_ext.EXTERNAL = 'Y'
     AND iv.vacancy_id = isc.object_id(+)
     AND isc.object_type(+) = 'VACANCY'
     AND isc.attribute1 = hl.lookup_code(+)
     AND hl.lookup_type(+) = 'NR_RECRUIT_AREAS'
     AND iv.vacancy_id = isc.object_id(+)
     AND isc.object_type(+) = 'VACANCY'
     AND isc.attribute2 = hl2.lookup_code(+)
     AND hl2.lookup_type(+) = 'NR_RECRUIT_GRADE_BAND'
     AND isc.object_type(+) = 'VACANCY'
     AND isc.attribute3 = hl3.lookup_code(+)
     AND hl3.lookup_type(+) = 'NR_RECRUIT_JOB_TYPE'
     AND pv.vacancy_id(+) = iv.vacancy_id
     AND iars.site_name = 'iRecruitment Internal Site'
     AND iars_ext.site_name = 'iRecruitment External Site'
     AND pv.location_id = hra.location_id
and trunc(PRA.date_start) between trunc(sysdate,'IW') and TRUNC(SYSDATE)]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="VACANCY_INFO" source = "Q1">
<element name="VACANCY_NAME" value ="VACANCY_NAME"/>
<element name="PROFESSIONAL_AREA" value ="PROFESSIONAL_AREA"/>
<element name="ORG_NAME" value ="ORG_NAME"/>
<element name="LOCATION" value ="LOCATION"/>
<element name="RECRUITER_NAME" value ="RECRUITER_NAME"/>
<element name="MANAGER_NAME" value ="MANAGER_NAME"/>
<element name="DEP_DESC" value ="DEP_DESC"/>
<element name="BRF_DESC" value ="BRF_DESC"/>
<element name="DET_DESC" value ="DET_DESC"/>
<element name="HTAI" value ="HTAI"/>
</group>
</dataStructure>
</dataTemplate>
-- end of xml file

Is there a way to create a schema for this simple XML?

Hi! A simple question. Suppose we have a XML that looks like that (simplified)
<documents>
<total>2</total>
<doc_1>
    <name>My document</name>
    <code>1234</code>
</doc_1>
<doc_2>
    <name>Another document</name>
    <code>5678</code>
</doc_2>
</documents>In this simple example, if the tag <total> had a numer of three, there would be a <doc_3> tag.
Is it posible to create a XSD to this XML? And is it posible for JAXB to process that XSD?
Thank you in advance

There are some tools around to generate XML Schemas from instance documents, but I don't know if they are too smart. For example, XMLSPY created the following Schema from your sample:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
     <xs:element name="code">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="1234"/>
                    <xs:enumeration value="5678"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="doc_1">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="name"/>
                    <xs:element ref="code"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="doc_2">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="name"/>
                    <xs:element ref="code"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="documents">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="total"/>
                    <xs:element ref="doc_1"/>
                    <xs:element ref="doc_2"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="name">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="Another document"/>
                    <xs:enumeration value="My document"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="total">
          <xs:simpleType>
               <xs:restriction base="xs:byte">
                    <xs:enumeration value="2"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
</xs:schema>XMLSPY has done its best but this Schema could certainly be cleaned up and made more efficient. If your instance documents aren't going to be too complex, it's probably best to have a tool like XMLSPY start you off, then you can go in by hand.
But, once you have the Schema in hand, you're ready to get started with JAXB.

How to get column value in grid View

Hello My first Language is German so bear with my English
FIRST vIEW THE SCREEN SHOT PLEASE
I am new to asp.net i am making small application to generate reports in which user give criteria just liek we do in sql server i have two grid view in accordion section then there is button so Both GridView has headers that Name
, Output and Filter
Name shows the Column of database fields, output column has check box if user check box it will only display those columns and filter is text box in which we filter our results
basically i am just trying to do this like sql server in which user check columns to display and also provide filter criteria and then sql query modified according to the grid values.
i have attached the screen shot of grid view kindly view it please You will have idea what i am tyring to say
now i want some help in filter criteria
suppose user check ref Code, School,Program, Name in the grid view and press show button
it generates query
select RefCode,School,Program,Name from Applicant.
now i want to apply where clause if user write something in filter text box which i can not do kindly help me out and view the screen shot my desire outcome is if user check column and also write some value in RefCode filter textbox let suppose '0565-01'
and in School Text user write SBE
it should generate sql
select RefCode,School,Program,Name from Applicant where (RefCode='0565-01')and (School='SBE');
my code for show button which generate simple select statement without where clause is below.
protected void Button2_Click(object sender, EventArgs e)
String output = "";
String filter = "";
foreach (GridViewRow row in gvExperience.Rows)
CheckBox cb = (CheckBox)row.FindControl("CheckBox1");
if (cb.Checked == true)
output += row.Cells[0].Text.ToString() + ','; // get the Name of columns and concate in output variable }
output = output.Remove(output.LastIndexOf(","), 1)
string sql = "select " + output + " from Applicant"; // display the query
bindoutput(sql); // pass this query and bind the new gridview which contain generated sql
Azeem

Hi Azeem,
>>I am new to asp.net
Please ask on this forum instead:
http://forums.asp.net/24.aspx/1?Web+Forms+Data+Controls
ASP.NET issue is not related to WinForm forum.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to upload comm seperated flate file into sap r/3?

plz send me any simple report program

Hi,
Please refer code below:
data : begin of itab1 occurs 0,
        values(1000) type c,
       end of itab1.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
DATA : filename TYPE string.
DATA : w_textout LIKE t100-text.
DATA: BEGIN OF messtab OCCURS 0.
        INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
data : begin of itab occurs 0,
           BLDAT(10) TYPE C,
           BLART(2) TYPE C,
           BUKRS(4) TYPE C,
           BUDAT(10) TYPE C,
           MONAT(2) TYPE C,
           WAERS(5) TYPE C,
           NEWBS(2) TYPE C,
           NEWKO(17) TYPE C,
           WRBTR(13) TYPE C,
           SGTXT(50) TYPE C,
           GSBER(4) TYPE C,
           KOSTL(10) TYPE C,
           AUFNR(10) TYPE C,
           TNEWBS(2) TYPE C,
           TNEWKO(17) TYPE C,
           TWRBTR(13) TYPE C,
       end of itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = p_file.
start-of-selection.
filename = p_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
     FILENAME                      = filename
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
    TABLES
      DATA_TAB                      = itab1
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   NO_AUTHORITY                  = 6
*   UNKNOWN_ERROR                 = 7
*   BAD_DATA_FORMAT               = 8
*   HEADER_NOT_ALLOWED            = 9
*   SEPARATOR_NOT_ALLOWED         = 10
*   HEADER_TOO_LONG               = 11
*   UNKNOWN_DP_ERROR              = 12
*   ACCESS_DENIED                 = 13
*   DP_OUT_OF_MEMORY              = 14
*   DISK_FULL                     = 15
*   DP_TIMEOUT                    = 16
*   OTHERS                        = 17
LOOP AT ITAB1.
      SPLIT ITAB1 AT ',' INTO ITAB-BLDAT ITAB-BLART ITAB-BUKRS ITAB-BUDAT ITAB-MONAT
                         ITAB-WAERS ITAB-NEWBS ITAB-NEWKO ITAB-WRBTR ITAB-SGTXT ITAB-GSBER ITAB-KOSTL ITAB-AUFNR.
    APPEND ITAB.
ENDLOOP.
Thanks,
Sriram Ponna.

How to configure dhcp client identifier

Hi Everybody,
The DHCP client ID is an id that is unique for DHCP clients at least in the same subnet. Usually the client uses MAC-address as Client-Identifier in the DHCPDISCOVER message. The Client-Identifier may be different other than MAC-Address, For example a FQDN name, as per the RFC 2132 Ref, (code 61).+_
Usaually, we use the following to bind the ip address based on MAC-address
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i '0:3:ba:a5:a9:93' -a 10.42.32.80
At server side, I am using the following for specifying the FQDN name.
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i 'one.atr.com' -a 10.42.32.80
and at client side, I am inserting the following entry in the /etc/default/dhcpagent file
CLIENT_ID='one.atr.com'
But this is not working. What I am doing wrong.
+1. At the server side, then how to assign the ip addresses to the clients , if the Client-Identifier is FQDN name in the DHCPDISCOVER message other than MAC-Address.+
+2. How to configure the client-identifier as FQDN name at client side.+
Please help me,
Thanks Inadvance,
Mummaneni.

Sandman,
Here is an example of a router acting as a DHCP server. Please remember that you have to exclude IP addresses that you don't want to lease out.
ip dhcp pool example
import all
network 192.168.1.0 255.255.255.0
dns-server 1.2.3.4
default-router 192.168.1.1
ip dhcp excluded-address 192.168.1.1 192.168.1.149
ip dhcp excluded-address 192.168.1.200 192.168.1.254
HTH,
Mark

Uploading sales text and Purchase order text for material master

Hi,
I have created, material master with LSMW byt not updated SALES TEXT and Purchase order text with LSMW now i want to uplaod the sales and po text for material master can you give some link or ref. code to upload the text i have near 1000 items for which i want to uplaod text when i have done the recording with SHDB i have not found filed in recording.
regards,
zafar

Hi,
I have made the code in se38
as below but still it is not working
REPORT ZTEST_TEXT.
data: headerl like thead occurs 0 with header line.
data itab3 like tline occurs 0 with header line.
headerl-tdobject = 'MATERIAL'.
headerl-tdname = '00000000000LSMW123'.          "(Material : 000000000300000560, Sorg : 0001, Dist channel: 01)
headerl-tdid = 'BEST'.
headerl-tdspras = 'E'.
append headerl.
move '*' to itab3-tdformat.
move 'Testing PO text' to itab3-tdline.
append itab3.
call function 'SAVE_TEXT'
exporting
    header                = headerl
insert                = ' '
   savemode_direct       = ' '
tables
    lines                 = itab3
exceptions
   id                    = 1
   language              = 2
   name                  = 3
   object                = 4
   others                = 5.
   IF SY-SUBRC = 0.
     CALL FUNCTION 'COMMIT_TEXT'
       EXPORTING
            OBJECT   = headerl-tdobject
            NAME     = headerl-tdname.
   ENDIF.
   break-point.
regards,
zafar

AT USER-COMMAND IN NORMAL REPORT

Please do not have your subject in ALL CAPITALS
Hi Experts,
Please advice,
I am having three fields in output first one is directly fetched from table and other two are variables.
ITAB-MENGE = fetched data.
ITAB-UCOMM =   user command.
AT SELECTION-SCREEN OUTPUT
when the user press ENTER
ITAB-SUM = ITAB-MENGE + ITAB-UCOMM.
For eq:
Suppose if:
ITAB-MENGE = 100
and if the user enters the value in ITAB-UCOMM = 200
and when the user press enter the sum should display on the other field ITAB-SUM
Note: I am using normal write statement ( not ALV ) & I am not using any parameters in selection screen all these has to fired on output screen
Thanks
R.Karthik
Edited by: Karthik R on Feb 28, 2009 3:34 PM
Edited by: Matt on Mar 1, 2009 7:18 PM

Hi,
Refer code:-
REPORT Z19TG7_1 NO STANDARD PAGE HEADING.
TABLES : LFA1.
TYPES : BEGIN OF VENDOR,
        LIFNR LIKE LFA1-LIFNR,
        NAME1 LIKE LFA1-NAME1,
        END OF VENDOR,
        BEGIN OF VENDOR1,
        LIFNR LIKE LFA1-LIFNR,
        NAME1 LIKE LFA1-NAME1,
        ORT01 LIKE LFA1-ORT01,
        LAND1 LIKE LFA1-LAND1,
        BUKRS LIKE LFB1-BUKRS,
        END OF VENDOR1.
DATA : VENDOR_TAB TYPE STANDARD TABLE OF VENDOR INITIAL SIZE 20 WITH HEADER LINE,
       VENDOR1_TAB TYPE STANDARD TABLE OF VENDOR1 INITIAL SIZE 20 WITH HEADER LINE,
       CB.
*       WAS_USED.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE SY-LSIND.
START-OF-SELECTION.
SET PF-STATUS 'Z19TG7_1_PF'.
SELECT LIFNR NAME1
FROM LFA1
INTO TABLE VENDOR_TAB.
AT USER-COMMAND.
CASE SY-UCOMM.
    WHEN 'VL'.
      IF SY-LSIND = 1.
        SET PF-STATUS SPACE.
        DO.
          CLEAR CB.
          READ LINE SY-INDEX FIELD VALUE CB.
          IF SY-SUBRC <> 0.
            EXIT.
          ELSE.
            CHECK CB = 'X'.
            MODIFY CURRENT LINE : FIELD VALUE CB FROM SPACE.
            SELECT A~LIFNR A~NAME1 A~ORT01 A~LAND1 B~BUKRS
            FROM LFA1 AS A
            LEFT OUTER JOIN LFB1 AS B
            ON A~LIFNR = B~LIFNR
            INTO TABLE VENDOR1_TAB
            WHERE A~LIFNR = VENDOR_TAB-LIFNR.
            LOOP AT VENDOR1_TAB.
              WRITE : / 'Vendor ID:' NO-GAP, VENDOR1_TAB-LIFNR,
                      / 'Vendor Name :' NO-GAP, VENDOR1_TAB-NAME1,
                      / 'City :' NO-GAP, VENDOR1_TAB-ORT01,
                      / 'Land :' NO-GAP, VENDOR1_TAB-LAND1,
                      / 'Country Code :' NO-GAP, VENDOR1_TAB-BUKRS.
              ULINE.
            ENDLOOP.
          ENDIF.
        ENDDO.
      ENDIF.
ENDCASE.
END-OF-SELECTION.
WRITE : /1 'CB', 5 TEXT-001, 18 TEXT-002.
ULINE.
LOOP AT VENDOR_TAB.
    WRITE : /1 CB AS CHECKBOX, 5 VENDOR_TAB-LIFNR, 18 VENDOR_TAB-NAME1.
    HIDE : VENDOR_TAB-LIFNR.
ENDLOOP.
ULINE.
Hope this helps you.
Regards,
Tarun

Ref Code S0a00

Similar Messages

Maybe you are looking for