Ref field in fb03

does reference field matter in printing cheque. using F-58. my question : is it possible cheque give all entries if u give Reference-field. and if u donot fill reference -field in F-58 . it will not display  entries.
thanks.

Hi Ravi,
even if you didn't get any answer, could you provide a feedback (as requested per forum rules) for all people who might search for answers in the forum?
Thx a lot!

Similar Messages

  • How to refer field of DataSource in transfer rule for DSO object  in BI 7.0

    hello Gurus,
    I am new to BI 7.
    pls tellme how to refer field of DataSource in transfer rule for DSO object.
    I will assign points to proper answer.
    Praveen.

    hi praveen,
    when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
    hope this will help you.
    regards
    vaibhav

  • ANSI X12 EDI 850 V4010 - REF Field length Increase

    Hi,
    The standarad EDI V4010 definiation contains Segment:REF, Field:127, MaxLength:30 (ISA.GS.ST.REF:127), partner sending a EDI data with more than 30 characters for this field. As per their EDI guide lines the MaxLength allows upto 50 chars for this field.
    Have changed the field length from 30 to 50 chars in ANSI X12 850 V4010 message structure and re-generated EDI To XML mapping.When test the mapping in BIC tool, the EDI file is getting converted to EDI XML when the field value is more than 30 chars i.e upto 50 chars. Also Tested by giving more than 50 chars value for this field and it's failed to convert in BIC mapping tool saying 'The length of the field value is too big'.
    As the change working in BIC tool, generated sda file and deployed on PI QA system. While test the change after .sda file deployment the change of Field Length is not reflecting and it's only allowing upto 30 chars only., and more than 30 chars data for this field EDI files are failing.
    As the change working alone in BIC tool fine and not reflecting thefield length after sds file deployment. Any ideas about this issue and how to handle this requirement.
    Thanks
    Veera

    Hi John,
    If you see the documentation what you have given :
    Parameters:
    on: delimiters at the end do not appear
    off: delimiters at the end appear
    it clearly says the parameter is used for the delimiters, but not for truncating length of the fields in Seeburger.
    I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works for this question:
    By the way I have used the seeburger and this requirement we have done within XI because we have done all the rules within XI not in seeburger. But I will give a try with this requirement and will try to update you. Until unless I work with any of the issue I will not suggest. Even If I didnt I will try and then will suggest. Dont get me wrong.
    Cheers,
    John.

  • Ref. field monitor in IW28

    Hi,
    In IW28 selection screen at the end there is a field Ref. field monitor  for traffic light display in the results
    Where we are customizing the Ref. field monitor ?
    Thanks

    Sorry, but there is no customising for this setting - its hard coded.
    If you are using ECC6, then you may be able to use the Enhancement Framework to make some changes
    PeteA

  • Adational field in FB03

    Hello
    SAP Experts my reqirement is in FB03 Tcode we need Assignment Field  how can i bring this field in FB03 Report
    This field is there in BSEG-ZUONR
    Please help me

    Hello
    After you run the FB03 report
    - Select Change layout
    - Select Assignment
    - Select left arrow to bring the assignment field
    - Save the layout
    Prasad

  • Required amount field in FB03

    Hi SAP experts,
    My client want amount field in FB03 .but i didnt get that field in fb03, is it any similar report with amount field
    Plz update me
    Have a good day
    Regards
    Surya

    Dear,
    You can get the amount filed in FB03 also.
    Enter document number , company code & fiscal year.
    Document will be displayed.
    Now click on Choose layout & select change layout.
    Add Amount filed from column set to displayed column & save it.
    Hope above will helpful.
    GOPAN.

  • What is "Advance Row Ref" field on JE Form Settings -- Document-- Table

    Hi Experts,
    Can someone please tell me what is ""Advance Row Ref" field on JE Form Settings > Document>Table" check box.
    Regards
    Dave

    Hi Dave,
    it's a functionality used to autopopulate the Ref3 field in the matrix of the JE. For example, you enter a BP or GL account & manually enter the value of '5' in the Ref3 field, when you now click on the account code field to enter an account in the second row, the application will automatically put in the manually entered value+1 into the Ref3 Ffield in the second row, here '6'.
    All the best,
    Kerstin

  • Need to populate text/ref fields for docs generated by allocation cycles

    When executing distribution or assessment cycles the doc header text, reference field and line item text are all left blank in the generated accounting document.  We would like to populate these fields with some reference to the cycle or segment names.  Is there any doc type or cycle setting or standard config that would allow us to populate these fields without the use of an exit?  Thank you in advance.

    Hi
    Goto GGB1 TCode
    under Cost Accounting you can find three allocation areas
    Find out right one and create new substitution rule to update text or ref
    Reg
    Vishnu

  • Regarding GR ref field

    Hai,
        While I am doing a report to display the folowing fields PO Number,PO date,plant,GR ref,GR date.I got all the fields except GR ref.Can anyone tell me the field for GR ref.
       Thanking You in advance.

    Hi,
         You can get reference field by using XBLNR field in MKPF Table.
    Reward points if helpful.
    Regards
    Gagan

  • Reftab ref field

    hi experts,
    what are the ref table name and field name for the currency field.
    and what are thge reference table and field names quantity which measures area of the land.
    thanks&regards,
    surendra

    Hi,
    When u r creating a table, for CURR,UNIT and QUAN type there is a refernce field and Reference table exists. This will inturn refers to the header table where the QUAN and CURR fields are maintained.
    TCURC for currency
    T006 for UOM       UNIT
    <b>T006D Dimensions</b>
    Message was edited by:
            Judith Jessie Selvi

  • Batch Number field in FB03

    Hi Friends,
    My client would like to have one additional field "Material Batch Number" field (i.e MSEG-CHARG) column in FB03 - Document Display layout.
    Need your help in achieving it.
    Thanks in advance.
    Regards,
    Sangharsh Navada

    Solved - LOIPRO01 IDoc does not pick up the Batch Number from AFPO table, instead from table RESB.    We need batch from AFPO and just created a lookup using the Process Order Number as import param

  • Adding fields in FB03 Document List

    Dear Experts
    Can anyone let me know whether there is any option to add additional fields like userid, Tcode, etc. in Document list available in FB03.
    I know that this facility is available in SAP versions 4.7 and above, but I am writing this with reference to version 4.6C.
    Thank you for your response.

    Issue closed

  • Reference tanble and ref.field issue about the datasource

    Hi all,
    I want to create a generic datasource by a database view in R/3.
    In the database view, there is one quantity filed which  refer to  a structure field not a table filed. Then I can not add the structure field into the database view.
    How can I do? Can I create the datasource by a query?
    many thanks!

    Hi Yang,
       Provide me your personal email id and I can send you step by step screenshots (Steps for creating an infoset).
    Here are the steps:
    1. Goto SQ03
    2. Create a User Group and assign your user id to it.
    3. Goto SQ02
    4. Enter a infoset name
    5. Assign the infoset to the user group you created in step 2.
    6. Now click on Create
    7. Select Radio Option "Direct read of table"
    8.  Specify the table name
    9. Save and generate the infoset.
    10. goto RSO2 and follow the steps for creating the generic datasource.
    11. Specify the Infoset name.
    If you have concerns .. let me know.
    Best regards,
    Kazmi

  • Additional field in FB03 and FBV0

    I want one additional field in the layout i.e. document amount, which is not available at present.  How to do.

    Hi
    You need to find additonal field details from functional consultant & ABAP'er.
    After that you need to create Z message type with that additional field/segment and further assign it to IDOC.The process is as follows :
    1)Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    2)Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Gud Luck

  • Assignment field in FB03 is updated with a TM PO, and not the material PO

    Hi Experts,
    I am facing an issue.
    Issue: The assignment field in accounting document generated during GR is updated with the TM PO number(Trade PO) and not the Material PO .
    this happens while Posting goods receipt in VL32N tcode.
    Please let me know what can be the issue.
    Thanks and regards,
    Meenakshi Raina

    Everytime we create a TM PO , the error occurs in account assignment the first time you do the Good issue.
    If you reverse the document and repost the Good Issue it works the correct way

Maybe you are looking for