Ref. field monitor in IW28

Hi,
In IW28 selection screen at the end there is a field Ref. field monitor for traffic light display in the results
Where we are customizing the Ref. field monitor ?
Thanks

Sorry, but there is no customising for this setting - its hard coded.
If you are using ECC6, then you may be able to use the Enhancement Framework to make some changes
PeteA

Similar Messages

How to refer field of DataSource in transfer rule for DSO object in BI 7.0

hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.

hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav

No Bars In field monitor

The only way I can get to bars in the field monitor is by turning on blue button. Then blue only comes on when blue setting is clicked off. Making it nearly impossible to calibrate the field monitor. I am using Vista, but this problem only arose recently. Anyone having the same problem? May try re-installing but hear a lot of horror stories about that route as well. Any suggestions would be highly appreciated.

Yup, tried restarting, rebooting etc.
Guess I will go the deactivate and re-install route and see what happens. After all, things were fine until recently. I am wondering if this is yet another "peculiarity" of Vista since when launching the app I now get a message that the Windows "scheme" has been changed due to incompatibility with a running program. Don't know why that would affect the color bars though. May be time to break down and scrounge the money for a Firestore. Not exactly the solution I was hoping for:>(
Anyway thanks for the input Mark. If I figure anything out I will post.

NO COLOR in Field Monitor of Adobe OnLocation

CONFIGURATION:
OnLocation CS3 (Trial), with XP Home SP2, Dell Dimention 4400, and NVidia AGP GeForce 5200 128MB video card, and 21" Optiquest Q110 monitor.
Video card supports 2 monitors analog (DB15) and DVI. In my configuration only analog output and single monitor is connected. There is also standard FireWire 1394 port where camera is connected. All works fine...
THE PROBLEM:
... except BARS and live feed image from camera, are always displayed in BLACK and WHITE (no color) but BLUE BARD are displayed in BLUE shades cirrectly. Monitor was callibrated and adjusted properly with NVidia settings (contrast, brightness, gamma, etc.) and all other applications are displayed in COLOR properly.
NOTES:
I understand that Field Monitor use overlay to display images, it should work OK as other video applications using overlay display work properly (e.g. Windows Media Player).
QUESTION:
What are technical reguirements for video (cards/monitors) to work properly with OnLocation as I couldn't find ANY information on Adobe website or anywhere else. Or, if anybody had similar problem and would like to share solution I would appreciate.

All turned out OK. It was just wrong setting for Field Monitor.
Everything works properly and live feed is now in full COLOR.

Mac Book Pro as field monitor?

Would it be possible to use the Mac Book Pro (the new 15" or 17") as a field monitor when shooting with a Sony PMW-EX3?
That would be neat to use the screen as a field monitor, then edit on the same machine...
Wouldn't that save in not having to have a monitor for the director?
If possible, how could it be done?
Thanks!
R. Dale McCarver

OnLocation from Adobe
HD Monitor
ScopeBox
Google each for their capabilities.

ANSI X12 EDI 850 V4010 - REF Field length Increase

Hi,
The standarad EDI V4010 definiation contains Segment:REF, Field:127, MaxLength:30 (ISA.GS.ST.REF:127), partner sending a EDI data with more than 30 characters for this field. As per their EDI guide lines the MaxLength allows upto 50 chars for this field.
Have changed the field length from 30 to 50 chars in ANSI X12 850 V4010 message structure and re-generated EDI To XML mapping.When test the mapping in BIC tool, the EDI file is getting converted to EDI XML when the field value is more than 30 chars i.e upto 50 chars. Also Tested by giving more than 50 chars value for this field and it's failed to convert in BIC mapping tool saying 'The length of the field value is too big'.
As the change working in BIC tool, generated sda file and deployed on PI QA system. While test the change after .sda file deployment the change of Field Length is not reflecting and it's only allowing upto 30 chars only., and more than 30 chars data for this field EDI files are failing.
As the change working alone in BIC tool fine and not reflecting thefield length after sds file deployment. Any ideas about this issue and how to handle this requirement.
Thanks
Veera

Hi John,
If you see the documentation what you have given :
Parameters:
on: delimiters at the end do not appear
off: delimiters at the end appear
it clearly says the parameter is used for the delimiters, but not for truncating length of the fields in Seeburger.
I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works for this question:
By the way I have used the seeburger and this requirement we have done within XI because we have done all the rules within XI not in seeburger. But I will give a try with this requirement and will try to update you. Until unless I work with any of the issue I will not suggest. Even If I didnt I will try and then will suggest. Dont get me wrong.
Cheers,
John.

OLCS3 Field Monitors display black video in single display

I am using OL CS3 on WinXPSP2 with Canon HV20 camcorder on FireWire to my Lenovo T60 laptop, and had some success in getting clips recorded yesterday. However, no luck today. The Field Monitors do not show the live video feed, but remain black.
I rebooted my laptop, plugged in FireWire port (in an Adaptec PCMCIA card), started OL, and turned on HV20 camcorder. In OL, the Canon HV20 is listed in the Devices list, and selecting it causes Field Monitor to display text label "canon hv20 camcorder". The Field Monitor(s) still show black video...while the camcorder display shows the live image.
My laptop has only the integrated LCD panel display in use (as at boot time), the video adapter is ATI Radeon Mobility X1400 which does support dual displays. I used ATI Catalyst sw to check the video settings, which indicate there is only one display in use, it is not running clone mode or extended desktop, and the video overlay is set to show in Standard Dual Mode (which indicates video would show on both Main display and Secondary displays in original source video aspect if two displays were in use).
I read the Adobe knowledge base kb402180 "Field monitor does not display video when used on a computer with dual monitors (OnLocation CS3)" but it does not seem to solve my problem.
I can use Premier Pro CS3 to capture video I recorded to tape on the HV20 using the same hw setup. So it seems the FireWire link is okay, the camera can push a video stream on it, and so I remain suspicious of the video overlay settings. Only other thing is maybe the camera is not pushing live video stream to the FireWire cable? I'll check on that.
Anyone have any help?
Thanks,
Patrick

Brooce,
Thanks for the tip on the bug form...that is great.
As it turns out, I ran a parallel request into the Adobe support forum, and Erik H got me the answer to this problem yesterday....I found that deleting the appProps.xml file in C:\Documents and Settings\(your user folder)\Local Settings\Application
Data\Adobe\OnLocation CS3 solved my problem.
MY GUESS
I use my laptop with dual external displays most of the time, but while trying to record with On Location I only use the integrated LCD panel while in the studio. I am guessing that OL gets confused if I happen to run it in both of these hardware configurations....the appProps.xml could get written with dual displays in my office and then OL might expect them even though the current hw config is a single panel while in the studio.
-Patrick

Can OnLocation be used as a field monitor only (no recording)?

Hi,
My laptop is to slow to record HDV but I would like to use onlocation as a field monitor without recording to the laptop. Is this possible? I can't find any info in the manual. It would be a lot easier for our client to monitor the shoot on the laptop then on the cameras LCD.
Thanks

It certainly can be used for such purposes.

What is "Advance Row Ref" field on JE Form Settings -- Document-- Table

Hi Experts,
Can someone please tell me what is ""Advance Row Ref" field on JE Form Settings > Document>Table" check box.
Regards
Dave

Hi Dave,
it's a functionality used to autopopulate the Ref3 field in the matrix of the JE. For example, you enter a BP or GL account & manually enter the value of '5' in the Ref3 field, when you now click on the account code field to enter an account in the second row, the application will automatically put in the manually entered value+1 into the Ref3 Ffield in the second row, here '6'.
All the best,
Kerstin

Flip Vertically - Field Monitor and captures in CS5

Hi,
I am using a Redrock micro M2 lens adapter on my Canon XH A1 (without the expensive flip accessory), and so the picture is inverted. I noticed that in OnLocation CS3, there is an option to flip the image vertically in the field monitor to correct this. However, I have OL CS5.5 and this feature doesn't seem to be there, or at least I can't find it. Anyone know how to flip the image vertically in the OL field monitor? Further to this, will the actual captured files be made flipped as well, or would it just be in the monitor? Appreciate any help.
Thanks,
Dan

Hi,
I am using a Redrock micro M2 lens adapter on my Canon XH A1 (without the expensive flip accessory), and so the picture is inverted. I noticed that in OnLocation CS3, there is an option to flip the image vertically in the field monitor to correct this. However, I have OL CS5.5 and this feature doesn't seem to be there, or at least I can't find it. Anyone know how to flip the image vertically in the OL field monitor? Further to this, will the actual captured files be made flipped as well, or would it just be in the monitor? Appreciate any help.
Thanks,
Dan

SX50 HS with Field Monitor

Hi,
Is it possible to connect the SX50 HS during shooting to an external Monitor via the HDMI output and do the composing / focusing on the much bigger screen?
Unfortunately I have no Mini-HDMI cable to test, so before I invest in cable and monitor I prefer to ask.
Thanks
Robert

CHDK does have Remote options for using several controls, but none for viewing live streams which I'm assuming what is meant by the OP - yes? I've been all over the CHDK PDF and there isn't a mention of streaming being made available to see better the Focussing and so on. Is there a loupe "shroud" that one of the Hoodman options:
http://www.hoodmanusa.com/prodinfo.asp?number=h-lpp3
http://www.hoodmanusa.com/cvp.asp
OK, I just tried with a mini to standard HDMI to my pro field monitor, which I do use with my Canon XF300, but to test I lashed it up to my SX50 - and no. I can't get a live stream from the SX50 output to see, only on Viewing previously captured work through Review. Nothing live.
Grazie

Need to populate text/ref fields for docs generated by allocation cycles

When executing distribution or assessment cycles the doc header text, reference field and line item text are all left blank in the generated accounting document. We would like to populate these fields with some reference to the cycle or segment names. Is there any doc type or cycle setting or standard config that would allow us to populate these fields without the use of an exit? Thank you in advance.

Hi
Goto GGB1 TCode
under Cost Accounting you can find three allocation areas
Find out right one and create new substitution rule to update text or ref
Reg
Vishnu

Regarding GR ref field

Hai,
    While I am doing a report to display the folowing fields PO Number,PO date,plant,GR ref,GR date.I got all the fields except GR ref.Can anyone tell me the field for GR ref.
   Thanking You in advance.

Hi,
     You can get reference field by using XBLNR field in MKPF Table.
Reward points if helpful.
Regards
Gagan

Reftab ref field

hi experts,
what are the ref table name and field name for the currency field.
and what are thge reference table and field names quantity which measures area of the land.
thanks&regards,
surendra

Hi,
When u r creating a table, for CURR,UNIT and QUAN type there is a refernce field and Reference table exists. This will inturn refers to the header table where the QUAN and CURR fields are maintained.
TCURC for currency
T006 for UOM UNIT
<b>T006D Dimensions</b>
Message was edited by:
Judith Jessie Selvi

[BPMON] - IDOCs fields monitoring - works incorrectly?

Hi,
Following the documentation I have set up a monitor that should monitor IDOCs in errors and that works correctly.
However there came a new requirement from the project about excluding from monitoring IDOCs that have a value 0 of one particular field. Therefore I set up a monitor that selects inbound IDOCs of a Message type let's say called MESSAGE, max IDOC age - 24, Field Name - SegmentName-FieldName, Field Value - I tested with >0 and with not equal to 0.
However with this setup IDOCs with SegmentName-FieldName = 0 are still monitored and they generate errors in BPMon.
Any suggestions what I might be possibly doing wrong?
Edited by: Gniadek Jolanta on Jun 21, 2011 12:58 PM
Actually I believe I found an answer, I believe that the problem lies in the logic, so BPMon maybe excludes IDOC that has a value 0 but later for other segments that have higher value it'll include it again. I guess this option would work only for fields with specific values that need to be included not excluded

Actually I believe I found an answer, I believe that the problem lies in the logic, so BPMon maybe excludes IDOC that has a value 0 but later for other segments that have higher value it'll include it again. I guess this option would work only for fields with specific values that need to be included not excluded

Ref. field monitor in IW28

Similar Messages

Maybe you are looking for