Ref: Immediate help required Approval Page problem / Task filter /

Hi...
I m facing the same problem wat Ryan has faced,..
Problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. <b>The approval notification never appears in the Recruiters approval page, but appreas in Maintenance page...and in the maintanance page i dont see any option to appove the requiistion</b> The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Raghav..

Any Help plz

Similar Messages

Query- Personnel Cost Planning-Immediate Help required

Hi,
I have a query.
I am trying to Assign Percentage to Cost Item ( Personnel cost Planning)- Bonus which is a dependent cost item to Direct Cost Item-Base Salary but when I run the
T. Code:- PHCPADMN the Bonus Percentage is not getting reflected and if I run the report-Plan data it is not showing any calculation of percentage.
Kindly any immediate help is highly appreciable as I need to resolve it ASAP.
Regards,
Happy

Hi Soniya
I think you should look into following links:
help.sap.com/printdocu/core/Print46c/en/data/pdf/PACMCP/PACMCP.pdf
help.sap.com/saphelp_46c/helpdata/en/fd/45a4f79d6411d189b60000e829fbbd/content.htm
Thanks
Yash

Just encountered a serious problem! Immediate help required!!

Hi there,
I've been using iTunes for quite some time now, and I've never experienced any major problems. But just today, I started up the program, and it was the weirdest thing I've ever seen. My entire iTunes library has reverted back to the way it was some point around two years ago! I am now down to 500 songs where there should be 2000+! Also, my playlists are gone, and there are ones that I deleted a long time ago. The files are still on my computer so it shouldn't be hard to get them back up there, but still I want to find out the cause of this, or if it will happen again!

I thought of that at first, but no I havn't done anything like that.
I checked around the rest of the computer to see just in case, but everything else was the same.

Help required for Page Customization test

Hello all,
Could anyone assist with a test on Page Customizations? I am interested in testing a specific Page Customization on Version 7 (any SP) or Version 9 (pre SP5).
Test case:
1. Create a Page Customization on MasterAgreement (or any other business document with Document Links) as follows:
2. Check effect in Master Agreement (requirement is to check if Add/Delete buttons have been disabled by the PageCust)
I think that this type of Page Customization was working in either 7 or 9 but we don't have any instance to check.
Any help would be highly appreciated.
Regards,
Bogdan

Hello Bogdan,
I tried to reproduce it in a 7.0 system and I still see the Add button enabled on the Doc Links collection. I believe this was the behavior all along. My understanding is that this is on product management backlog for consideration for a future release.
Regards,
Vikram

Immediate help required with decode statement in scheduling jobs

Hi
Iam trying to change a job that runs my procedure using dbms_job.. Here is the output I got.
Can someone help me why this is giving me errors.
<code>
SQL> exec dbms_job.next_date(395,decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),-1,'trunc(sysdate) +18.5/24',1,'trunc(sysdate)+1+6.5/24'));
BEGIN dbms_job.next_date(395,decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),-1,'trunc(sysdate) +18.5/24',1,'trunc(sysdate)+1+6.5/24')); END;
ERROR at line 1:
ORA-06550: line 1, column 30:
PLS-00204: function or pseudo-column 'DECODE' may be used inside a SQL
statement only
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
</code>
Thanks in advance

A possible solution:
declare
v_next_varchar varchar2(30);
v_next_date date;
begin
select decode(sign(substr(to_char(sysdate,'dd/mm/yy hh24:mi'),10,2)-17),
-1,'trunc(sysdate) +18.5/24',
1,'trunc(sysdate) +1+6.5/24'
into v_next_varchar
from dual;
execute immediate 'select ' || v_next_varchar || ' from dual ' into v_next_date;
dbms_job.next_date(22, v_next_date);
commit;
end;Bye, Aron

Re: Help Required with Broadband Problem

Nuketamilnadu
I cannot see that you have visited these forums to ask for help, unless it was under a different name?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Solved!
Go to Solution.

Thanks Keith!
Here's the bumph you've asked for:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 06:30:39
Downstream:
574.3 Kbps
Upstream:
1.106 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
32.7 dB / 6.6 dB
Line attenuation (Down/Up):
16.7 dB / 9.6 dB
Output power (Down/Up):
18.3 dBm / 12.4 dBm
FEC Events (Down/Up):
0 / 71
CRC Events (Down/Up):
0 / 13
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 23
Error Seconds (Local/Remote):
13 / 20

Pls. help, SQL script page problem

Hi,
Im using the Hands On Oracle Database 10g Express Edition for Linux. Im in chap06 already p. 218. I just uploaded the SYSMGMT1 script. After that I Clicked the script's icon but I cannot see any SQL DDL commands inside. Nothing happened. It said in the book that I supposed to see and browse the SQL DDL commands that make up the script. I tried to click RUN, nothing happened either. Is there some kind of a bug in my System? Pls. help me because I cannot continue this chapter's exercise if I cannot solve this first problem that I encountered here in chap06. Any help from the guys outhere is really greatly appreciated. Thank you.
respectfully waiting,
Len

Hi, did you ever get a solution to this because I am having exact same problem - I cannot see the scripts if I upload them nor can I type them in from scratch as the area for seeing/editting the script doesn't seem to be accessible.

Dynamic ALV Layout - Immediate help required

I have a Summary and a Detailed ALV layout screen. Now when i get to detailed screen from summary screen; I choose a layout say L1 here. Then I press F3(back) this would get me back to the summary screen.Now my requirement is when i click on detailed view from here now; the previously chosen layout L1 needs to be used for the report output. Can this be done?
Note : This needs to be done without choosing layout from selection screen.
Require help urgently on this.
Regards
Swamy

Yes you can do that.
When you are backing out of detailed screen, store the name of the layout in a variable. When you are coming in the detailed screen again, pass this layout name in the IS_VARIANT-LAYOUT variable along with other values.
Before backing out of the detailed screen you can get the layout chosen using the function REUSE_ALV_GRID_LAYOUT_INFO_GET or calling the method GET_FRONTEND_LAYOUT of the class CL_GUI_ALV_GRID, depending on how you are displaying the report.
Regards,
Ravi
Note - Please mark all the helpful answers

Behavior of load balancers - Oracle weblogic 10.0 - immediate help required

Hi,
We have an environment where we have two load balancing servers for one application. We are facing an issue, where a request which comes from the front end (Ajax request) is re-submitted exactly after 3 minutes in this load balancing environment. At any time, one server is taking the requests, but the request is getting re-submitted after every 3 mins. First time, the request is taking more than 3 minutes to give the response, so, many requests are getting submitted each after 3 minutes. Can any one suggest me which setting/parameter of the load balancer cause this? And how to resolve this? We came to know that this is purely of load-balancing issue, as the same issue is not reproducible in normal environments (single server env)
Awaiting your immediate response,
Thanks in advance...
Gayathri.
Edited by: 900817 on Dec 29, 2011 9:34 PM

If I understand your scenario,
* a client at some other layer of your application submits an AJAX type request towards a service running on WebLogic 10.x
* that transaction IS expected to have a long execution time -- longer than 3 minutes
* your service on WebLogic is seeing the request submitted a second time (in error) after 3 minutes elapse while the prior thread is still running
It sounds like:
* the request was implemented as a synchronous call
* your AJAX framework is using a default TCP timeout of 180 seconds (3 minutes) -- pretty standard setting
* the client isn't seeing a response in 180 seconds and its TCP layer is assuming something errored out and is aborting the first TCP connection and resubmitting it.
Assuming the load balancer isn't implementing its own 180 second limit on connections without any traffic flowing, you may need to either
* find a way to tune your AJAX client to configure it to wait longer for responses
* alter the implementation of the service to be an asynchronous call so the AJAX client waits for a callback sent by your service when execution completes.
Hope that helps.

JNDI lookup fails ...IMMEDIATE HELP REQUIRED !!!

Hi
I am new to using the WLS,currenty I am using Weblogic6.1(sp).I developed a statelessSession
Bean and have successfully deployed it to the server.Counterfit I wrote a Client
class to check weather my beans are working properly.My client class to be in
breif inserts some values into the database.
When I am trying to execute my client code it gives me out the following error
- with nested exception:
[javax.naming.NameNotFoundException: Unable to resolve SQLConnectionPool. Resolved:
'' Unresolved:'SQLConn
ectionPool' ; remaining name '']
at com.wellmanage.Bean.MessageLoggerBean.getConnection(MessageLoggerBean.java:186)
at com.wellmanage.Bean.MessageLoggerBean.logMessage(MessageLoggerBean.java:77)
at com.wellmanage.Bean.MessageLoggerBean_3p5ifg_EOImpl.logMessage(MessageLoggerBean_3p5ifg_EOImpl.
java:79)
at com.wellmanage.Bean.MessageLoggerBean_3p5ifg_EOImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:265)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
SQLConnectionPool is the JNDI name i mentioned in the weblogic console.In the
same fashion I also mentioned the jndilookup in my bean class with the same name
(SQLConnectionPool)as follows
public Connection getConnection() throws SQLException
try
InitialContext jndiCntx = new InitialContext();
// DataSource ds = (DataSource)jndiCntx.lookup("java:comp/env/jdbc/SQLConnectionPool");
DataSource ds = (DataSource)jndiCntx.lookup("SQLConnectionPool");
return ds.getConnection();
catch(NamingException ne)
throw new EJBException(ne);
SO FINALLY IT GIVES ME OUT THE ABOVE FIRST MENTIONED ERROR.i ALSO TRIED USING
THE jnidlookup mentioned in the comments ie.."DataSource ds = (DataSource)jndiCntx.lookup("java:comp/env/jdbc/SQLConnectionPool");
" then also it throws an error.
CAN ANYBODY HELP ME IT A MATTER OF URGENCY...
Thanks
Srini

can u post ur config.xml
Srini wrote:
Hi
I am new to using the WLS,currenty I am using Weblogic6.1(sp).I developed a statelessSession
Bean and have successfully deployed it to the server.Counterfit I wrote a Client
class to check weather my beans are working properly.My client class to be in
breif inserts some values into the database.
When I am trying to execute my client code it gives me out the following error
- with nested exception:
[javax.naming.NameNotFoundException: Unable to resolve SQLConnectionPool. Resolved:
'' Unresolved:'SQLConn
ectionPool' ; remaining name '']
at com.wellmanage.Bean.MessageLoggerBean.getConnection(MessageLoggerBean.java:186)
at com.wellmanage.Bean.MessageLoggerBean.logMessage(MessageLoggerBean.java:77)
at com.wellmanage.Bean.MessageLoggerBean_3p5ifg_EOImpl.logMessage(MessageLoggerBean_3p5ifg_EOImpl.
java:79)
at com.wellmanage.Bean.MessageLoggerBean_3p5ifg_EOImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:296)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:265)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
SQLConnectionPool is the JNDI name i mentioned in the weblogic console.In the
same fashion I also mentioned the jndilookup in my bean class with the same name
(SQLConnectionPool)as follows
public Connection getConnection() throws SQLException
try
InitialContext jndiCntx = new InitialContext();
// DataSource ds = (DataSource)jndiCntx.lookup("java:comp/env/jdbc/SQLConnectionPool");
DataSource ds = (DataSource)jndiCntx.lookup("SQLConnectionPool");
return ds.getConnection();
catch(NamingException ne)
throw new EJBException(ne);
SO FINALLY IT GIVES ME OUT THE ABOVE FIRST MENTIONED ERROR.i ALSO TRIED USING
THE jnidlookup mentioned in the comments ie.."DataSource ds = (DataSource)jndiCntx.lookup("java:comp/env/jdbc/SQLConnectionPool");
" then also it throws an error.
CAN ANYBODY HELP ME IT A MATTER OF URGENCY...
Thanks
Srini

Immediate help required with this update statement

update holds set area = (select newarea from stagesteps)
where holds.stage= stagesteps.stagename and holds.step = stagesteps.STEPNAME and holds.area is not null
When I do this, it says stagesteps.stepame is an invalid name..
Any helps on this highly appreciated.. btw Advance thanx for your help.

update holds h
   set area = (select ss.newarea
                 from stagesteps ss
                where ss.stagename = h.stage
                  and ss.stepname = h.step)
where area is not null
   and exists (select null
                 from ss.newarea
                 from stagesteps ss
                where ss.stagename = h.stage
                  and ss.stepname = h.step);You can leave off the EXISTS clause if there will be a guaranteed matching row in stagesteps for each row in holds, or if you don't care if area is set to null if there is no match.

Immediate help required with this job scheduling scenario

I have a job that needs to run a procedure hourly but not between 6:00 AM to 8:00 AM and 6:00 PM to 8:00 PM.
Can anyone help me with how to schedule this job.

If you use a window the job would only execute if the window opens. If for some reason the window did not open then the job would not execute.
Windows should be used to specify which resource plan should be active for the time interval.
In this case you are better off using FREQ=DAILY; BYHOUR=; and specify the hours.

Pls immediate help required log files are getting big size than 1GB

oc4j_DBConsole_mbcvizpilot3.mbc.uae_vizrtdb\log

Do as follows :
- stop EM
- rename log directory to log.old
- create a new log directory
- restart EM
- check that new log files have been created in the new log directory
- after checking that everything works fine you can remove the old directory.
You shouldn't have any problem, at least I didn't have any...

Immediate HELP in Tomcat 5 to Postgresql 7.4 database connectivity problem

Hi,
I failed to connect Tomcat 5.0.24 with Postgresql
7.4.2. The files created by me and the changes i had
made in the existing files are rates.jsp,
conversionDAO.java, web.xml and server.xml. The error
message on the top of the rest of it was "The value of
useBean class attribute converter.conversionDAO is
invalid". So far I found out that the coding for
database connectivity purpose in conversionDAO.java
cause the error. Another thing is Postgresql jdbc
driver is required to set in the CLASSPATH for the
java file to access the Postgresql database. I don't
know where should I put it in Tomcat for web
application. Anyway, I put it in
$CATALINA_HOME/shared/lib according the book i
refered. I do the database connectivity coding refer
to the Tomcat Kick Start book from Sams Publishing.
Below are the coding involved, please show me the
mistake i had made. Thank you.
----server.xml----
<Context path="/database"
docBase="${catalina.home}/webapps/database" debug="0"
reload="true">
<ResourceParams name="jdbc/conversion">
<parameter>
<name>username</name>
<value>myusername</value>
</parameter>
<parameter>
<name>password</name>
<value>mypassword</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>org.postgresql.Driver</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:postgresql://localhost/conversion</value>
</parameter>
</ResourceParams>
</Context>
----web.xml----
<servlet>
<servlet-name>conversionDAO</servlet-name>
<servlet-class>converters.conversionDAO</servlet-class>
</servlet>
<resource-ref>
<res-ref-name>jdbc/conversion</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
----conversionDAO.java----
public conversionDAO() throws SQLException,
NamingException
Context init = new InitialContext();
Context ctx = (Context)
init.lookup("java:comp/env");
DataSource ds = (DataSource)
ctx.lookup("jdbc/conversion");
con = ds.getConnection();
select = con.prepareStatement(
"SELECT rate FROM Exchange WHERE src= ? AND dst =

Immediate HELP in Tomcat 5 to Postgresql 7.4 database connectivity problem (cont.)
Errors log
2004-06-06 01:07:53 StandardContext[servlets-examples]SessionListener: contextDestroyed()
2004-06-06 01:07:53 StandardContext[servlets-examples]ContextListener: contextDestroyed()
2004-06-06 01:07:53 StandardContext[jsp-examples]SessionListener: contextDestroyed()
2004-06-06 01:07:53 StandardContext[jsp-examples]ContextListener: contextDestroyed()
2004-06-06 01:07:59 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2004-06-06 01:08:00 StandardContext[jsp-examples]ContextListener: contextInitialized()
2004-06-06 01:08:00 StandardContext[jsp-examples]SessionListener: contextInitialized()
2004-06-06 01:08:00 StandardContext[servlets-examples]ContextListener: contextInitialized()
2004-06-06 01:08:00 StandardContext[servlets-examples]SessionListener: contextInitialized()
2004-06-06 01:08:01 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: /rates/rates.jsp(5,0) The value for the useBean class attribute converters.conversionDAO is invalid.
     at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
     at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:357)
     at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:141)
     at org.apache.jasper.compiler.Generator$GenerateVisitor.visit(Generator.java:1217)
     at org.apache.jasper.compiler.Node$UseBean.accept(Node.java:1116)
     at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
     at org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2213)
     at org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2219)
     at org.apache.jasper.compiler.Node$Root.accept(Node.java:456)
     at org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
     at org.apache.jasper.compiler.Generator.generate(Generator.java:3261)
     at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:244)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:422)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:507)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:274)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
----more----

Help Required !!! -- Dynamic table on specific height of JSP page

I have large data.
I have to show this data in dynamic table on jsp page.
the JSP page is logically divided in different pages (as this page is used for printing on specified size of page)
I can only display atmost 12 single rows on one page
but some times text of one column of row become so large that rows expands vertically and occupies space of 2 or 3 rows (thats why now i have to display 8 or 9 rows on first page and then remaining on next )
becoz of this i cant implement this check (only show 12 rows on a page).
so what can i do to show specified height of table on one page and remaining move to next page.

This is an impossible requirement. Page, font and element height is not only browser dependend, but also depending on the settings of the user. Some users will override the font size to be smaller or bigger using a browser option, resizing your table accordingly. Mac fonts might have different sizes if the fonts are antialiased, etc.
You'd have more success if you could output the table as PDF, there are far more table spacing options available, it's portable and you have 100% control over the output. Check out the iText API for example. The only problem with this is that the PDF will be opened by a PDF viewer which you cannot control, so you cannot make it automatically print.

Ref: Immediate help required Approval Page problem / Task filter /

Similar Messages

Maybe you are looking for