Ref: Mail & Hermstedt Leonardo USB (ISDN) Problems

Can anyone help me...??
Ever since I installed Tiger back in April... my Mail application won't let me send email completely using my Hermstedt Leonardo USB ISDN modem. I can recieve perfectly normal... but when I go tto send an email... more particularly an email with an attachment it will send.. 10%, 30% maybe even 49% and then hang.... I then have to Disconnect and re Connect... and try again... it might get to 90% even 100% and hang all over again. I have been onto Hermstedt who say it's Apple's Mail application... I have paid good money for Apple Support who have told me it's Hermstedt's problem for not using their recommended Tiger drivers. All nmo use to me as my Leonardo modem just won't work consistently with Mail... or Tiger... who knows... not me. All I know is that I revert to the 56k internal Apple modem all works perfectly... send / receive without a problem. I have earsed my computer using Zero clean and rebuilt the entire system back up and still the problem remains. Can anyone help.... has anyone a similar issue... I'm an experienced Mac User... so I have tried all the usual things... double checked my setting etc.. all is perfect.... just can't figure out why it's not working... when 10.4.2 came out I thought that would solve it... but nothing. I'm now waiting anxiously for 10.4.3, but I got a gut feeling that ain't going to make any difference either.
Please message me with any comments of helpful advice you may have...
Yours sincerely,
Anthony (Irish MacUser and MacAddict)

Hi Anthony;
Could you recommend what I should do and what products I should buy to get my Ethernet Modem working successfully on my system.
I have a LAN at home for my two Macs and my work IBM laptop. What I did was to connected a four port Ethernet switch to the modem. From the switch, I able to plug in my laptop and one of my Macs into the ports of the switch. The other Mac is downstairs so I have an Airport Extreme Base Station which gives me wireless to go downstairs. It is actually quite straight forward.
By having my modem on the network, that means everything on the network has access to the Internet. All of my computer are using only a single Ethernet port for access to each other and to the Internet.
So to summarize this I would recommend you get an Ethernet switch and connect that to the Ethernet output of your modem. The Ethernet switch will then give you additional ports for all of your computer.
If you have any additional questions, please let me know.
Allan

Similar Messages

  • When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems. Can anyone help

    When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems but has started to be recoccuring. Can anyone help please as its pointless having email on my phone otherwise :-(  as i have to wait till i log on at home to respond.
    thanks
    Alison

    https://discussions.apple.com/message/16832350#16832350  follow the link user was having same problem.  Solution was given.

  • USB Sound Problem

    I'm having a problem with my Bose USB sound system that has just recently developed. The system is plugged directly into the back of my Mac Pro desktop so it's not going through any hubs or secondary systems. When I first start my computer the sound works just fine. But after about 10 to 15 minutes of use the sound stops completely - as if the sounds have been turned off. If I boot into Windows 7 using Boot Camp, the sound system there works just fine with no problems at all, so I do not believe this issue is hardware related but is something associated with OS X.
    This all started recently after installing Tinker Tool and then realizing that their latest version is not compatible with Snow Leopard. I followed their directions and told Tinker Tool to restore the previous settings and then I removed it from my system. Now, I'm having this USB sound problem. I think it's highly probable to be the cause of my problem.
    Is there anyway to reinstall the USB drivers in OS X without reinstalling the entire OS? Or, is there something else I can try to restore the USB function to Snow Leopard? Many thanks for any tips or suggestions.

    They are plug and play.
    I did try unplugging all of the USB devices and then powered off the computer and unplugged it for about 5 minutes as I heard that that sometimes solves USB problems. However, upon reconnecting the problem returned. All other USB devices seem to be working normally - it's only the Bose sound system. I tried plugging it into a different USB port in the back of the computer but the problem continued after about 10 minutes. Therefore, I am convinced this is not hardware related.
    At this point I am thinking I need to reinstall OS X Snow Leopard to undo whatever Tinker Tool damaged. Is it possible to just replace the USB drivers in OS X without reinstalling everything?

  • Lumia 620 usb disconnection problem

    Hi. Am facing a problem of usb disconnection while transferring data from my laptop. It's good for 1 or 2 minutes, after that am getting device not available on my laptop.
    Also I noticed the charging symbol on battery is blinking when connected to usb, but ok when connected to power cord. Is that blinking normal?
    clarify please

    The blinking is not normal.  I haven't run across any bad USB cable problems on Nokia phones but there have been some HTC USB cables that work to charge but not fot the PC connection. If you have another similar USB cable try it. Try other PC usb ports also

  • After upgrade to ios 6 usb connection problems with car stereo

    Hi Everyone,
    after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
    Any Ideas?
    Thanks
    Ivo

    (same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

  • Tandberg 800 isdn problems

    Hi all,
    I’ve a customer with an old videoconference device Tandberg 800 with 3 BRI access that have the following problem:
    When i make a video call to another end-point by ISDN , the video call establish but then is always intermittent , one moment I’ve video and audio for 5 seg , after that the video disappear and after 30 seg returns again  , when I’ve no audio it appears that I’ve isdn problems because appears on the screen the message “re-establishing call … please wait” . I tried to isolate the problem , by disconnect one by one isdn access but without any good result. Sometimes I’ve audio but no video but the other side I’ve audio and video.
    Can someone help me on this ? Did anybody have a similar problem with any codec with isdn that have this behavior ? “re-establishing call … please wait”
    Best regards.

    The Tandberg 800 is an extremely old device - end of sale in 2005, and the last day of support date was 31 January 2010.  And so old, that the device that was suggested as a possible replacement (Edge 95 MXP) went end of sale last too year!
    There are firmware updates for it available on the Tandberg FTP server so you may have some luck if you're running an older verison by updating it (Release Notes are available there too).
    Given the age of the device, and the fact it's past its last date of support - you'd be better off considering replacing it with a newer, supportable device (which is also likely to be more compatible with others).
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • [N85] USB charging problem

    Hello all,
    I tried to charge my N85 with an [non-Nokia] USB battery charger (Lenovo 90W Slim AC/DC Combo Adapter) via the Nokia Connectivity Cable (CA-101) to keep down the amount of chargers I have to carry.
    But except of asking, which data connection profile I want to use, there is no charging at all.
    Am I doing something wrong or is the N85 only chargeable by the original Nokia wall charger?
    Thank you
    sicut

    30-Nov-2008 09:35 PM
    rbreton74 wrote:
    @sapporaby: Are you sure you have read my post completely? "Apple" is a brand o usb charger that does not work with my Nokia N85. It's a brand like "Kensington", with a usb charger that do work. Both usb charger worked with my old Nokia N95. I just want to know whether someone else has this problem usb charging problems too or if only my problem, and to make know @sicut that he is not the only one with usb charging problems with his Nokia N85 and his Lenovo charger.
    @sapporaby, is it "apple" a word taboo for you? Why "kensington" is not taboo? Why "lenovo" is not taboo either?
    1. I have had every Mac made since 2003.
    2. I am typing this on a Mac now.
    3. I have had and still have every iPhone made.
    4. Same with every brand iPod.
    5. I am running Apple software right now and the Nokia for Mac software.
    Is that taboo enough for you? DON'T ASSUME because now your taboo question is moot.
    As for your the Apple charger does not work issue, my question still stands. While your Apple charger may have worked with your N95 there is no reason why it should work with your N85. Are they the same phone?. Is the N85 made by Apple? No again. Does the Apple charger supply the same charging voltage as the Nokia charger that came with the phone? These are issues that come into play. What is so hard to use the cable that came with the phone. It seems, and maybe I am wrong but you and the OP are making a mountain out of a moe-hill.
    Just use the cable that came with the phone, in the USB port of your computer and be done with it. I am having a very hard time trying to understand what the problem is with using the cable.
    Message Edited by sapporobaby on 30-Nov-2008 10:07 PM
    Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
    Apple iPhone 5,
    Retina MacBook Pro, iPad Mini, Nikon D4

  • Mail 6.0  or Keychain problem with passwords

    I'm using Mountain Lion and mail 6.0 but it seems that mail or keychain keeps on asking for my password.
    Mail bounces on by dock because it needs attention.  When I go to it, I see a dialogue that says "cannot coonect to the server"
    It is asking me for my password.  However, I can see that the password is already entered and all I have to do is click OK and the problem is gone until after about 5 minutes.  It starts all over again.

    Patrick,
    I have experienced the same symptoms.
    Opening Audio MIDI Setup, and changing the Built-in Output>Format to another choice (2ch-20bit Integer) and then back to the prvious setting (2ch-24bit Integer) briefly fixes the lack of Mail sounds, but unfortunately the problem eventually returns after computer sleep.
    I have tried a Safe Boot, and removed the Audio MIDI plist without success.

  • N78 USB CONNECTIVITY PROBLEMS

    Hy guys,
    Since i've bought my N78 i've been able to connect the phone via cable only one time. After that, every time i've tryed to connect my n78 via cable my computer doesn't recognize my Phone.
    When I plug USB cable in one of the USB ports, Windows XP gives me back an error that says "USB devices not recognized - One or more devices connected to the computer has not worked correctly. Windows is not able to recognize it".
    I've reinstalled PC suite thousands of times,but nothing changes.
    My phone has the 12.046 software version. I know that there'e a newer version but how I can update it if my PC does not recognize the phone, and hence, PC suite is not able to connect to the phone.
    Many thanks for you help
    m

    you have another option in updating via Firmware Over The Air. you can do this by entering *#0000# in the standby screen and selecting Options > Check for updates. if an update is not available over NSU, then it may be on FOTA instead for your product code. this method of updating only takes about three to five minutes anyway. remember to do a hard reset (three-finger hard reset) after updating your phone to the new firmware.
    so you can probably update from 12.046 to 20.149 or 21.002. USB connectivity problems are probably due to problems with the USB cable or the computer, i have had no problems at all with USB connectivity in all the time i've had my N78, even under 12.046 firmware.
    let us know how it goes.
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • Mavericks, Mail 7.0, iCloud account problem

    Upgraded to Mavericks, now iCloud mail is off line.  Problem with iCloud account.  It looks like it cannot save the password.
    Any ideas how to fix this??
    If I send out an email, it will ask for my password and then work fine.  If I close and reopen the problem reutrns.
    I do not have this problem with my MBA. Upgrade went fine, all mail accounts work.
    I found the answer!!
    Mail = Pref= Accounts = Advance = Pull down menu - chnage auth: from password to Apple token.

    I've been having this same problem. It seems to occure in both Mail app and Text Edit.
    When I have a body of text, and I try to select a part of it, or click to set my cursor somewhere in it, the new text that I begin to type suddenly appears down the row somewhere else -- obviously where I had no intention of typing it.
    Another issue that sprung up at the same time as this, was that Mail app will not automatically attach a signature file to my mail anymore. It always has to be manually selected from the pull-down in the new message window.
    Both of these issus began immediately when I upgraded to Mavericks, and have even transferred over to a brand new computer when the user account was migrated over.

  • Exchange 2010 - missing mails moved by rules / strange problem

    Hello,
    one of our users has a pretty strange problem.
    First of all, he has 12 rules (11 server-sided plus default for removing categories) and a HUGE folder-tree for about 1.5 years.
    His tree looks like:
    Inbox
    -A
    --1
    --2
    ---a
    ---b
    --3 Newsletter
    --4
    -B
    --1
    --2
    --3 Newsletter
    --4
    ...and so on for 192 folders
    Other Stuff
    -A
    --1
    --2
    ... and so on for 80 folders
    Since this week, he complains about missing mails.
    While investigating this problem, everything looks fine at first. Mails are stored to his mailbox successfully.
    Later we found out, that he has rules to move incoming mails to his "--3 Newsletter" folders depending on sender (and no further processing) and was looking for exactly those mails.
    But the mails were not visible in the target folder and neither in the inbox folder.
    Using the search function on inbox, I was not able to find the mails. After checking the box for all subfolders, the mail was found. Hovering the mail I was told, that it is in the target folder - where for sure it wasn't.
    Opening the mail from the search result and clicking on [File], "Inbox" was displayed as the current folder.
    After re-running the matching rule, the mails were visible in the target folder. This worked for yesterday. New mails were moved successfully.
    And today, we have the very same problem again. And again, I can quick-fix it by re-running the rules.
    As I can see and "fix" this on his machine and on my admin machine, this can't be any local problem.
    Any hints or solutions for that?
    Our Exchange version 14.3.123.4
    (Gosh, this input field is a huge pain in the ass! Why the hell does it automatically uppercase some words?)

    AdminDisplayVersion               : Version 14.3 (Build 123.4)
    Where can I see which RU this is?
    Outlook on his machine is configured with cache-mode, Outlook on my admin machine is configured for online-mode only
    The Rollup installed (if any) is not shown in EMC or EMS.
    See:
    Dude, where's my rollup?
    Martina Miskovic

  • ICloud on an iMac is unable to load mail. Message " Can't load mail. There was a problem loading the application. )

    I can not access my mail on my desktop. The problem is persistant and the only message I get is " Can't load mail. There was a problem loading the application. )

  • HT2518 How do I export mail from windows xp to my mac? Can I just copy all my windows mail to a USB storage device and plug it into my mac?

    How do I export mail from windows xp to my mac? Can I just copy all my windows mail to a USB storage device and plug it into my mac?

    Select "export' while in Windoz/Outlook and cerate an export file, then while in MacOS/Outlook select "import" and select the same file to import. You can use a thumb drive to sneakernet the file.

  • USB mounting problem

    I have done my best to research this, but have not found a solution.
    After a new Arch installation on a new machine (Dell Precision T3400) I am unable to change the permissions (even as root!) on files once they are transferred to the usbstick (a Code 1 error message is returned). Other operations, such as copying, moving and deleting occur as usual. I have also noticed that as soon as files are transferred to the USB stick, the permissions get changed (but not the ownership), as if whatever is reading the stick is also changing the permissions.
    It is not the stick -- the same stick performs normally on every other computer I use it on.
    fstab: /dev/sdc1   /mnt/usbstick  vfat   rw,user,auto,sync  0    0
    (basically the same as on 3 other Linux machines I use, all running Arch).
    When mounted, sdc1 has ownership  root:disk.  I have added myself to the disk group. /mnt/usbstick has myself as the owner.
    Not a major problem, just slightly irritating.
    Thea

    Thanks, Pheon --
    I just noticed I made a mistake in giving my fstab line, it should be:
    /dev/sdc1   /mnt/usbstick   vfat   rw,user,noauto,sync   0   0
    (so "noauto" instead of "auto" in the mount options)
    As I indicated, this is not a USB stick problem (same stick works just fine on other machines) -- also, in my attempts to troubleshoot this, I changed the filesystem on the USB stick to VFAT -- previously, it was whatever the default is when it comes out of the factory, and at that time the fstab line looked like:
    /dev/sdc1   /mnt/usbstick   auto   rw,user,noauto,sync   0   0
    Same situation, i.e. changing the filesystem did not affect the problem in any way.
    Any other ideas?

  • X6 8gb Usb Port Problem

    My x6 usb port not working and i took it to nokia care to fix that problem and they told me that we don't have that type of IC to fix your problem and we can't fix your usb port problem .....if u can't fix the problem they why the hell your running service centre i am totally fed up with this nokia ....guys pls tell what should i do now

    Can't they arrange for the part ? Insist on that.. if they agree, you may be asked to pay for the part upfront..If they do not, contact Nokia by using the 'Contact Us' tab at the top of this page and hope for a favourable resolution.

Maybe you are looking for