Ref. Oprn. Set not found while crreating - REWORK ORDER
Dear Prasobh & Nandha ,
Errors in Routing & Referance operation set are cleared.While confirming & saving rework the system propses the order creation after specifying the referance operation set xxxxxxxx & S.Iam getting the same error Referance operation set not fonud.
I have Created in OPJF selection prioity fof task list type " S " as
01 1 N 1 Production 4 Released (general)
01 2 N 1 Production 2 Released for order
01 3 2 1 Production 4 Released (general)
01 4 2 1 Production 2 Released for order
01 5 S 1 Production 4 Released (general)
I have checked in Opl8 sel id 01 exists.
Can i have your personel id so that i can send screen shots.
Regards
Shankar
Hi
Please check whether these entries are made in
<b>OPL8-Order type Dependent Parameters
Routing selection -3(Routing/Ref.Operation set optional.Automatic)
Sequence Exchange- 0
Task List type - N -routing.</b>
Selection Id - 01
As per this settings if your FG has got routing it will pick the routing automatically otherwise it will ask for a reference operation set,thats valid a one(for your plant),enter that.it will accept
Even after doing these things if u find any error please revert to me.
I assume that while creating the order after giving the quantity,when its'asking the pop up window for Enter reference operation set,check in the task list type whether its of type S-Reference operation set as u have create d a reference opearation set using T code CA11.
Thanks & regards
Karthik
Message was edited by:
Karthikraj
Message was edited by:
Karthikraj
Similar Messages
-
PARTNER PROCESSING OBJECT BUS2032 NOT FOUND WHILE CREATING SALES ORDER
Hi All,
I am not able to create a sales order it gives a Error "PARTNER PROCESSING OBJECT BUS2032 not found". Can any one inform me what could be a problem. Thanks in advance.Yes, The Partner function SP is active.
We had a work around.
When the sales order was saved, being in Partner function Tab we got the error message. However when we returned to the Overview and saved the Order, we were through with the same. But, Iam not sure how could this happen. -
[PWS0007] Operation result set not found.
Hi,
I am working with java,db2 on AS/400.
When I am using my application with multiple users hitting the submit at the same time,I am getting
the following error:
Exception: [PWS0007] Operation result set not found. Cause . . . . . : The handle specified for the operation result set to be filled, returned, or used as the based on result set is not found for the server.
Recovery . . . : Correct the operation result set handle and do the function again.
Can anybody please tell me what could be the problem?
Thanks in advance.problem could be
1)Resulsets objects are not closing after getting data (like end of rRrsultSet while loop)
2)it is better close statements and connection objects also. -
IPlanet 6.0 and struts (Extension of file not found, while displaying stati
i am trying to launch the strut appln in iPlanet 6.0 when i am making a reqest for jsp i am getting a message saying Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content . i do not have any clue on this why i am getting this message.
Could anybody help me regarding thisHello,
I am experiencing the same problem too. My jsp accesses a javabean. I
noticed, most of the times, I thought, it happened when session was timed
out. But it also happended before the time-out too. I had it set as default
at 30 minutes.
If you find out a solution or some high lights please let me know.
Thanks a lots.
ThuThien Ho
[email protected]
(703) 428-2856
Jordi Lucas wrote:
Hi all,
I have the following problem.
When I try to execute a jsp, the server responds:
Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content
This problem doesn't ocurred with all jsp's, it seems that only ocurrs
with the jsp's that call EJB's or JavaBean's.
Anyone has encountered with the same problem?
Any idea?
We are using Iplanet Application Server 6.0 SP3 and IPlanetWebServer 4.1
SP7.
Thanks in advance !
Jordi Lucas Essi Projects
Ingeniero de desarrollo
[email protected] t +34 977 221 182
http://www.essiprojects.com f +34 977 230 170 -
CASE not found while executing CASE statement on Submit Form
Hi to all APEX users and developers.
I have several APEX applications and they are all working well, but recently I got one strange exception when I try to submit page:
Session: Fetch session header information
...metadata, fetch page info
...Validate item page affinity.
...Validate hidden_protected items.
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06592: CASE not found while executing CASE statement
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6592
......ora_sqlerrm: ORA-06592: CASE not found while executing CASE statement
.....error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 9273
......component.type: APEX_APPLICATION_AUTH
......component.id: 41350431648668800
......component.name: MNRFR
...Show Error on Error Page
......Performing rollback
Processes - point: AFTER_ERROR_HEADER
Processes - point: BEFORE_ERROR_FOOTER
End Page Processinga
Page has more than 120 items (most of them are hidden), so my first thought is that page has problem with posting so many items, but APEX error message doesn't hel me at all. Any help would be very appreciated :)
AlmirHi Almir,
actually it is the 100 page item limit. See (http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/limits.htm)
I also had a look into the source code and the code at the position where the error gets raised only supports 100 page items.
Can you have a look into the generated HTML code and look if you have a page items which is mapped to p_t101 or a higher number ?
I will file a bug to show a better error message.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
" APPLICATION NOT FOUND" while deploying Web dynpro java Application
Hi, I am getting a message that "application not found " While deploying the web dynpro java application .......... please give me a solution for this .
Hi Ram,
This error comes generally when your webdynpro project does not have an application. To create an application in your webdynpro project follow the underlying steps:
<Project>->WebDynpro->Applications ---> right click and create New Application.
Follow the steps to create the application.
Now if you create archive and deploy, it will not give you the error again.
Best Regards,
Ravi -
Payment Method supplement is not found while posting invoice thru' F-43
Dear Gurus,
I have configured Vendor Account group (OBD3) & created a vendor account (XK01).While posting thru' T code F-43,an error "Enter payment method supplement in line item 001" is found.But, payment method supplement field is not found while posting.Please solve my problem.hi ,
In F-43 when you enter the document & posting date, company code, currency , And Vendor number PRESS ENTER it will take you to next screen There you can find the PAYMENT METHOD tab under invoice reference .
hope this will help you . -
Error 404 -- Not Found while accessing weblogic console
Hi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
PratapHi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
Pratap -
Error "Specifed Key not found" while installing Oracle 11g R2 db
Hi,
I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
*Specified Key not found
Please help me solving this problem. Your help is much appreciated.
Thanks in advance.979400 wrote:
Hi ..
I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #----------------------------- -
Getting error "Http 404 not found" while accessing CUCM GUI..
Hi,
Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
Please find attached screenshot for ur referance.
Thanks & R's
HarishHi Aaron,
I have restarted dat service bt still the issue is persisting.
Now its showing attached error.
Thanks and R's
Harish -
HTTP 404 Not Found while accessing Human Resource Intelligence functions
Hi,
Can anyone help me in resolving
HTTP 404 Not Found while accessing Human Resource Intelligence functions
error
Instance : R12
ThanksHi,
Apache log file is not showing any errors.What log files have you checked? Please check error_log and access_log files, you should find more details about the error in these logs.
Thanks,
Hussein -
[SOLVED] rEFInd -- Error: Not Found while loading vmlinuz-linux
System Info:
3.14.1-1-ARCH
refind-efi-0.7.8-1
Problem: rEFInd does not boot arch linux.
When booting the machine, rEFInd's gui selection menu presents options for windows or linux.
Upon selecting linux, the following is displayed:
rEFInd - Booting OS
Starting vmlinuz-linux
Using load options 'ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 initrd=\boot\initramfs-linux.img'
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
* Hit any key to continue *
Below are the outputs of blkid, lsblk -f, the structure of /boot and cats of /boot/efi/EFI/refind/refind.conf and /boot/refind_linux.conf
blkid
/dev/sda1: UUID="2014-05-01-05-20-54-00" LABEL="ARCH_201405" TYPE="iso9660" PTUUID="1535e446" PTTYPE="dos" PARTUUID="1535e446-01"
/dev/sda2: SEC_TYPE="msdos" LABEL="ARCHISO_EFI" UUID="96ED-5DA9" TYPE="vfat" PARTUUID="1535e446-02"
/dev/sdb1: LABEL="Recovery" UUID="E63202B832028E2D" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e3729f62-9c32-4ac9-a9dd-56a9c073e7e5"
/dev/sdb2: UUID="9C03-552D" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9bcdb083-82e9-49e6-b03d-fd376585d633"
/dev/sdb4: UUID="B2161962161928BD" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6de10de9-3322-486c-8108-bf14f5a7bcb6"
/dev/sdb5: UUID="bd6b3352-1b79-4c70-a061-21ff87ff0772" TYPE="ext4" PARTLABEL="root" PARTUUID="699115b1-1413-42b3-9fd7-a80a8a51b6fa"
/dev/sdb6: UUID="e71e6a25-913a-4932-9fc9-81942a5dab2e" TYPE="ext4" PARTLABEL="home" PARTUUID="1fc33e24-4c26-459c-a80a-9440e1f4e683"
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/loop2: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/mapper/arch_root-image: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/sdb3: PARTLABEL="Microsoft reserved partition" PARTUUID="fa94c812-e1ff-4603-ba97-be7f155f12c8"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sdb
├─sdb1
├─sdb2 /boot/efi
├─sdb3
├─sdb4
├─sdb5 /
└─sdb6 /home
sdc
├─sdc1
└─sdc2
loop0
loop1
└─arch_root-image /etc/resolv.conf
loop2
└─arch_root-image /etc/resolv.conf
Structure of /boot
*note: /boot is really the original microsoft efi system partition (in my case, /dev/sda2) that I mounted to /boot/efi and whose structure is shown below:
/boot
├── efi
│ ├── EFI
│ │ ├── Boot
│ │ │ └── bootx64.efi
│ │ ├── Microsoft
│ │ │ └── Boot
│ │ │ ├── BCD
│ │ │ ├── BCD.LOG
│ │ │ ├── BCD.LOG1
│ │ │ ├── BCD.LOG2
│ │ │ ├── bg-BG
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ └── bootmgr.efi.mui
│ │ │ ├── bootmgfw.efi
│ │ │ ├── bootmgr.efi
│ │ │ ├── BOOTSTAT.DAT
│ │ │ ├── boot.stl
│ │ │ ├── en-US
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ ├── bootmgr.efi.mui
│ │ │ │ └── memtest.efi.mui
│ │ │ ├── Fonts
│ │ │ │ ├── {{FONTS REMOVED FOR BREVITY}}
│ │ │ ├── Resources
│ │ │ │ ├── bootres.dll
│ │ │ │ └── en-US
│ │ │ │ └── bootres.dll.mui
│ │ ├── refind
│ │ │ ├── drivers_x64
│ │ │ │ └── ext4_x64.efi
│ │ │ ├── icons
│ │ │ │ ├── {{ICONS REMOVED FOR BREVITY}}
│ │ │ ├── keys
│ │ │ │ ├── altlinux.cer
│ │ │ │ ├── canonical-uefi-ca.der
│ │ │ │ ├── fedora-ca.cer
│ │ │ │ ├── openSUSE-UEFI-CA-Certificate.cer
│ │ │ │ ├── refind.cer
│ │ │ │ └── SLES-UEFI-CA-Certificate.cer
│ │ │ ├── refind.conf <=================== http://ix.io/cFy
│ │ │ └── refind_x64.efi
│ │ └── tools
│ ├── initramfs-linux-fallback.img
│ ├── initramfs-linux.img
│ └── vmlinuz-linux
└── refind_linux.conf <===================== http://ix.io/cFw
49 directories, 190 files
Excerpt of /boot/efi/EFI/refind/refind.conf
(full file available here: http://ix.io/cFy)
menuentry Linux {
icon EFI/refind/icons/os_arch.icns
volume "EFI system partition"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
cat /boot/refind_linux.conf
"Boot with standard options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 "
"Boot to single-user mode" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 single"
"Boot with minimal options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
Last edited by dk0r (2014-05-28 01:36:16)A couple of things that are important:
refind_linux.conf should be in the same directory as vmlinuz-linux and the initrd so it should be in /boot/ since that is where your kernel is.
In your refind.conf stanza you have the line volume "EFI system partition" which tells rEFInd that the loader is in that partition whereas the kernel and initrd files seem to be in /boot/ which is not the EFI System Partition. Hence the volume line needs to specify the filesystem where /boot is which in your case appears to be /dev/sdb5 so the volume line in that case should be volume "root" since root is the filesystem label for sdb5? Note that if you update to rEFInd version 0.8.0 or later then you can use the partuuid value to specify the volume but in the version you are using that token for the volume was not yet implemented.
In the stanza you quoted there was no terminating } but maybe you just didn't copy it to your post.
Making these changes may let the system boot to the arch kernel.
Last edited by mcloaked (2014-05-27 20:21:16) -
JRE not found, while installing Oracle 9i on Fedora Core 5
I am installing Oracle 9i on Fedora Core 5 from the following site.
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
The site asks me to Download the Java Runtime Enviroment (j2re-1_3_1_15-linux-i586.bin) from the Sun website.
extract the file and put it in /opt directory. And edit Disk1/install/linux/oraparam.ini and modify JRE_LOCATION variable to /opt/jre1.3.xx
I have downloaded JRE version jre1.3.1_19 as this is the version available from the sun site, and put it in the /opt directory.
[oracle@localhost Disk1]$ cd /opt
[oracle@localhost opt]$ ls -l
total 24
drwxr-xr-x 6 root root 4096 Aug 19 2006 jre1.3.1_19
My oraparam.ini settings are:
[oracle@localhost ~]$ cat Disk1/install/linux/oraparam.ini
[Oracle]
JRE_LOCATION=/opt/jre1.3.1_19
However, after doing these changes when I use /home/oracle/Disk1/runInstaller, i get the following error:
[oracle@localhost Disk1]$ pwd
/home/oracle/Disk1
[oracle@localhost Disk1]$ ./runInstaller
[oracle@localhost Disk1]$ The Java RunTime Environment was not found at /tmp/OraInstall2008-04-29_07-09-15AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directoryIvan Kartik:
I have installed Oracle 9i on Fedora 5.
I am able to login using sqlplus 'sys/sys as sysdba'
and start the database using startup
However, there were problems starting Configuration Assistant services and HTTP Server.
Here are the details:
Launched configuration tool Agent Configuration Assistant
Command which is being spawned is /opt/oracle/920/JRE/bin/jre -classpath /opt/oracle/920/JRE/lib/rt.jar:/opt/oracle/920/jlib/srvm.jar:/opt/oracle/920/network/agent/agentca.jar oracle.agent.AgentCA /orahome /opt/oracle/920 /nodeinfo NO_VALUE
Configuration tool Agent Configuration Assistant failed
Parameter "orahome" = /opt/oracle/920
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Result code for launching of configuration tool is 1
Launched configuration tool Starting HTTP Server
Command which is being spawned is /opt/oracle/920/Apache/Apache/bin/apachectl startssl
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Starting HTTP Server failed
/opt/oracle/920/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
/opt/oracle/920/Apache/Apache/bin/apachectl startssl: httpd could not be started
Result code for launching of configuration tool is 1
Launched configuration tool Agent Configuration Assistant
Command which is being spawned is /opt/oracle/920/JRE/bin/jre -classpath /opt/oracle/920/JRE/lib/rt.jar:/opt/oracle/920/jlib/srvm.jar:/opt/oracle/920/network/agent/agentca.jar oracle.agent.AgentCA /orahome /opt/oracle/920 /nodeinfo NO_VALUE
Configuration tool Agent Configuration Assistant failed
Parameter "orahome" = /opt/oracle/920
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed -
Page definition is not found while running JSR286 portlet in WebCenter app
Hi All,
I have ADF application which has 3 different task flows 1. my service 2. my car 3. my bike.
which I have placed into a single bounded task flow called repairTaskflow.
I have created a JSR286 portlet out of a repairTaskflow. I am trying to consume it in an Webcenter application. When I place the portlet on to the page in Web center application
and run the page. I see the following error in the console.
oracle.jbo.NoDefException: JBO-25002: Definition ***.xxxx.view.pageDefs.applications_task_flow_applications_task_flow_CreateEmptyApplicationPageDef of type Form Binding Definition is not found.
at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2703)
at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2715)
at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:292)
at oracle.adf.model.binding.DCBindingContainerReference.getDef(DCBindingContainerReference.java:107)
at oracle.adf.model.BindingContext.findBindingContainerDefByPath(BindingContext.java:1624)
at oracle.adf.controller.internal.binding.RegionUtils.findOrCreateBindingContainer(RegionUtils.java:246)
at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.getActivityBindingContainer(DataBindingActivityImpl.java:233)
at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.beforeExecute(DataBindingActivityImpl.java:77)
at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:969)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:878)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:777)
at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)
at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:147)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:109)
at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:78)
at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:43)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:879)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:312)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
at org.apache.myfaces.portlet.faces.bridge.BridgeImpl.doFacesRender(BridgeImpl.java:1002)
Please find below the portlet.xml file
<portlet-app version="2.0" xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<portlet id="adf_taskflow_WEB_INF_test_task_flow_xml">
<description>test-task-flow</description>
<portlet-name>test-task-flow</portlet-name>
<display-name>test-task-flow</display-name>
<portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
<init-param>
<name>javax.portlet.faces.defaultViewId.view</name>
<value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/test-task-flow.xml&_fragmentTaskFlowId=test-task-flow</value>
</init-param>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<portlet-info>
<title>test-task-flow</title>
<short-title>test-task-flow</short-title>
</portlet-info>
<security-role-ref>
<role-name>valid-users</role-name>
</security-role-ref>
<container-runtime-option>
<name>com.oracle.portlet.requireIFrame</name>
<value>true</value>
</container-runtime-option>
<container-runtime-option>
<name>com.oracle.portlet.minimumWsrpVersion</name>
<value>2</value>
</container-runtime-option>
</portlet>
<portlet id="adf_taskflow_WEB_INF_single_task_flow_definition_xml">
<description>single-task-flow-definition</description>
<portlet-name>single-task-flow-definition</portlet-name>
<display-name>single-task-flow-definition</display-name>
<portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
<init-param>
<name>javax.portlet.faces.defaultViewId.view</name>
<value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/single-task-flow-definition.xml&_fragmentTaskFlowId=single-task-flow-definition</value>
</init-param>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<portlet-info>
<title>single-task-flow-definition</title>
<short-title>single-task-flow-definition</short-title>
</portlet-info>
<container-runtime-option>
<name>com.oracle.portlet.requireIFrame</name>
<value>true</value>
</container-runtime-option>
<container-runtime-option>
<name>com.oracle.portlet.minimumWsrpVersion</name>
<value>2</value>
</container-runtime-option>
</portlet>
<portlet id="adf_taskflow_WEB_INF_applications_task_flow_xml">
<description>applications-task-flow</description>
<portlet-name>applications-task-flow</portlet-name>
<display-name>applications-task-flow</display-name>
<portlet-class>oracle.portlet.bridge.adf.application.ADFBridgePortlet</portlet-class>
<init-param>
<name>javax.portlet.faces.defaultViewId.view</name>
<value>/adf.task-flow?adf.tfDoc=/WEB-INF/adfp-portlet-bridge-container.xml&adf.tfId=adfp-portlet-bridge-container&_fragmentTaskFlowDoc=/WEB-INF/applications-task-flow.xml&_fragmentTaskFlowId=applications-task-flow</value>
</init-param>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<portlet-info>
<title>applications-task-flow</title>
<short-title>applications-task-flow</short-title>
</portlet-info>
<container-runtime-option>
<name>com.oracle.portlet.requireIFrame</name>
<value>true</value>
</container-runtime-option>
<container-runtime-option>
<name>com.oracle.portlet.minimumWsrpVersion</name>
<value>2</value>
</container-runtime-option>
</portlet>
<custom-portlet-mode>
<portlet-mode>about</portlet-mode>
</custom-portlet-mode>
<custom-portlet-mode>
<portlet-mode>config</portlet-mode>
</custom-portlet-mode>
<custom-portlet-mode>
<portlet-mode>edit_defaults</portlet-mode>
</custom-portlet-mode>
<custom-portlet-mode>
<portlet-mode>preview</portlet-mode>
</custom-portlet-mode>
<custom-portlet-mode>
<portlet-mode>print</portlet-mode>
</custom-portlet-mode>
</portlet-app> In all the 3 task flow there is at least one method activity placed either as the default activity or part of activities.
In service page taskflow the default activity is a method activity. If I convert the service-task-flow alone as a portlet, it failed. showing the similar error : pagedef not found.
Then I created the portlet out of car task-flow whose default activity is a page. This time I can view the portlet, the car list page. Once I click create button on that page which again goes through a method activity, then it failed showing the error mentioned above
It seems where ever there are method activities on the taskflow, the portlet cannot find the pagedef and its throwing error . I have cross checked the deployed war file and all the pagedef's are bundled into it.
Any suggestions are much appreciated.
Thanks,
Morgan.
Edited by: Morgan Freeman on Aug 19, 2011 3:27 AM
Edited by: Morgan Freeman on Aug 19, 2011 3:30 AM
Edited by: Morgan Freeman on Aug 19, 2011 6:02 AMHi All,
I solved this issue. The path of pagedef files was not recognized when I publish the taskflows as portlets. Though it runs when I place it as a region on jspx file.
The folder structure where I placed pagedefs earlier was some thing like this in ViewController -> Application Resources
com.mycomp.view.pagedefs
When I wanted to consume the portlet in the portal application, all the pagedefs under this path were not visible to the portlet.
Once I change the pagedef folder to the immediate folder after the Application Resources, it found all the pagedefs
Now my folder structure in ViewController -> Application Resources
view.pagedefs
Is this a bug? or Am I missing some thing.
Thanks,
Morgan. -
Error 404--Not Found - while running report in 11g
Dear All ,
I have my oracle application in 10g R1. Now we are migarting that to 11g .
There is a temporary directory where we are generating report output (PDF)
we are using an alias name web_reps for this folder .
Given the AliasMatch in forms.conf and in registry given the alias name for FORMS_MAPPING .
It was working with 10g . Tried the same in 11g so that report is generating in the folder (PDF)
but while openeing the file using web.showdocument () using the alias name it is giving the below error .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If any body know this issue pls help .
Thanks
JyoAre you using apache in front of your weblogics, or just plain weblogic? Also please post the full version of your 11g installation (11.1.1.x or 11.1.2.x). If you are using no apache and the 11.1.1.x version for development (without apache) the forms servlet and the reports servlet are deployed on different weblogic instances running on a different port; meaning forms is available under e.g.
http://ias:9001/forms/frmservlet
whereas reports is available under
http://ias:9002/reports/rwservlet
but when running reports via web.show_document it assumes both are running on the same port. Also make sure your weblogic instances are up and running. So either you use apache for production (in 11.1.1.x or 11.1.2.x) or you go for 11.1.2 in development where the forms and the reports servlets are deployed on the very same port. As far as I am concerned I'd go for 11.1.2 as the production environment is nothing different from 11.1.1 and the development environment is a hell of a lot easier to install.
cheers
Maybe you are looking for
-
Got my daughter an ipod touch 4th and it wont dothe back up from itunes? I bought my other daughter an iphone 4 and its doing the same thing. Both are locking up itunes too. I tried the deactivate/activate that was suggested it still didnt work. I to
-
Dashboard services won't start (ServiceProviderRegistry)
I am working with a fresh install, and after windows update finished, I have 5 services related to Dashboard that no longer start. This is preventing me from accessing any of the backup and client imaging features, along with basically all dashboard
-
Posting multiple idocs of different IDOC/message type
Hi! ALL It would be very helpful if you please provide your valuable suggestions... I have 4 different file to IDOC mappings and i am trying to post all the 4 using the same interface determination....out of the 4 ....2 IDOC are of the same message t
-
I have set up two OID instances to talk between one another and think I have the mapping files correct. I now see Insufficient Access Rights in the logs. Does anyone have any ideas what this could be? Does the exchange between servers run under a spe
-
I cannot find Adobe story on my laptop. Can I re- download it? I am worried why i cant find it as i used it on this laptop a few months ago. I see Adobe Story Plus in the download Center but i dont want to collaborate and pay for all that. I just w