Reference field for Automatic Clearing - STO

Hi All,
This pertains to automatic clearing of line items in Cenvat Clearing Account for STO transactions.
Our client is using J1IIN for creating outgoing STO Excise Invoice at sending plant. The accounting document posted will have Billing Document Number in its reference field.
The accounting entry will be:
Cenvat Clearing A/c Dr.
Cenvat Payable A/c Cr.
In the receiving plant an incoming excise STO invoice is posted in J1IEX. In the accounting document, the reference field is filled with the excise invoice number generated in J1IIN.
The accounting entry will be:
Cenvat Receivable A/c Dr.
Cenvat Clearing A/c Cr.
Since the reference fileds are having different document numbers, clearing the open items in Cenvat Clearing Account using automatic clearing has become difficult.
Need inputs on how to get a common text (either Billing Document Number or Outgoing Excise Invoice Number) entered in reference field for both the Excise Invoices in J1IIN and J1IEX, so as to make this automatic clearing work fine . . . .
Can anybody help in this regard..??
Regards,
Ravi Kumar

Hi
In OB74  we have following options for defining rules
COA      A/Type     Frm No      To No         Criter 1      Criter 2      Criter 3      Criter 4      Criter 5
     D     1     9999999999     VERTN     VERTT     VBEWA
     D     A     Z     ZUONR     GSBER     VBUND
     K     A     Z     ZUONR     GSBER     VBUND
     S     0     9999999999     ZUONR     GSBER     VBUND
From the above we can have options for
1. For all accounts or selected one account , we can have upto 5 criterias for our decision to vlear
2. We can have COA level decisions also
3. We can have Account type level decisions - Vendor, Customer & GL accounts - one or many and can many rules defined.
4. apart from the above you have the option to clear the criteria order of the field for account type definitions level
Please go through the settings - SPRO-GL/AP/AR- Business Transactions- Open items processing- auto clearing 
whether this helps u to understand the logic

Similar Messages

  • GRIR - Criteria set in OB74 - Additional rule for automatic clearing

    Hi,
    WIth reference to the subject of this post, I would like to have advice on the commonly used criteria for the GRIR GL account.
    My GL master for this GRIR settings: sort key is 010: Purchase order no., which is EBELN (Tcode: OB16).
    Currently the settings at OB74 - Additional rule for automatic clearing for my GRIR are as follows:
    DMBTR, Amt.in loc.cur.
    ZUONR, Assignment
    EBELN, Purchasing Document
    My issue is due to the criteria of DMBTR, Amt.in loc.cur, I am not able to clear the GRIR GL using F.13, and after I remove the criteria: DMBTR, Amt.in loc.cur, I manage to clear all my GR and IR entries which have 0 balance in amount in local currency.
    KIndly advise.
    P/S: DO I need to have the following settings, additionally?
    Define Tolerance Groups for G/L Accounts
    Define Tolerance Groups for Employees
    Assign Users to Tolerance Groups
    Create Accounts for Clearing Differences
    Thanks in advance.

    Thanks.
    But my problem is as follows:
    My issue is due to the criteria of DMBTR, Amt.in loc.cur, I am not able to clear the GRIR GL using F.13, and after I remove the criteria: DMBTR, Amt.in loc.cur, I manage to clear all my GR and IR entries which have 0 balance in amount in local currency.
    Do you have any idea?

  • Reference field for quantity/currency

    why s that we need to give a reference field for quantity and currency based fields alone

    hi,
    The reference field is used for the output, the output/input format of a currency field depends on the value of its reference field.
    For example if you create a screen using the field KONV-KBETR :
    the reference field is RV61A-AWEI1:
    if you set RV61A-AWEI1 = 3
    the value in KONV-KBETR is beeing shown with 3 decimals
    So you could see 3,000 but this value is automatically stored as 30.00
    if you set RV61A-AWEI1 = 2
    the value in KONV-KBETR is beeing shown with 2 decimals
    All this convertions are automatically made in according to the value setted in reference field.
    You can see this using the statament WRITE with options CURRENCY, try this:
    PARAMETERS P_KBETR LIKE KONV-KBETR.
    WRITE: P_KBETR CURRENCY '3'.
    WRITE: / P_KBETR CURRENCY '2'.
    WRITE: / P_KBETR CURRENCY '1'.
    Rgds
    Anver

  • Payment via FPY1 and  a lock for automatic clearing

    Hello,
    I would like to lock a debit item for automatic clearing but let it be paid via FPY1.
    When trying to lock it using the posting lock it can't be paid via FPY1.
    What can I do ?
    Thanks,
    Vered

    Hi ,
                In
    CA/A/r a/p--basic function--open item management --clearing control--define specification for clearing types --define defaults for account maintenance
    click on the clearing type (03,04) and go to selection criteria define  for clearing category and the concerned main/sub , tick the NC column , this will exclude the particular main sub from clearing .
                                                               similarly for  account  maintenance during invoicing go to
    sap utilities --- invoicing ---invoice processing --item selection in invoicing --item selection in account maintenance for the clearing type , click on item selection for account maintenance , for the main/sub, mark OISEL ="9" 

  • GL is relevant for automatic clearing

    By which t.code we can check that the any particular g/l is relavant for automatic clearing or not?
    regards
    Rekha sharma

    Hi,
    Goto transaction FBKP,and select automatic clearing business transaction, there you can find GL assigned for automatic clearing.
    Regards,
    Sreekanth

  • F.13 is a standard program for automatic clearing?

    f.13 is a standard program for automatic clearing? can i include plant code to the standard program.....and it is used for display clearing......need information?

    HI,
    F.13 is a Stanndard program for Automatic clearing as you rightly siad. This is wholely dependent on the settings that you make in OB74 which is matching criteria.
    Let me take an examloe and explain.
    Lets say you have a customer invoice for  1,00,000/-. The customer has given 80,000/- once and 15,000/- once and the balance 5,000/- the company has issued a Credit Note.
    If this is a single transaction in a year you may wonder why this F.13 is used. However in practice there will be many transactions per day it self and advising a business proces of F-32 account Clear is not a good practice as the user is loaded with transactions.
    Hence You will be taking this as a periodic process and clearing automatically is advised using F.13.
    For the system to understand you will be giving the matching criteria in OB74.
    So when ever you run this program, program checks for matching Amounts in Dr and Cr sides with the matching feilds given in OB74
    The uncleared items need attention which may or may not be processed manually,
    For GR IR clearing also you can use this transaction and any open item manged account as longas the matching criteria is confiured.
    I don't think you can use Plant code in this.
    Reward points if useful.
    Sarma

  • Reference Field for /DBM/AMOUNT?

    Dear All,
    I have a field with Data Element /DBM/AMOUNT which is a quantity field. Now when i'm creating a table with this table it is giving a syntax error that a reference field is not defined. Please let me know the reference field for this field.
    Thanks,
    Sai

    hi sai krishna,
    for currency/quantity fields u need to give referance field.
    for that go to some standard table and click on currency/quantity field  , u get the refarence field and refarence table to those fields, u assign corresponding fields to u'r fields in u'r table.
    ex: GEWEI ref-fild for weight filed and MARA ref table.
    regards,
    chandu.

  • Populate customer reference field for credit memo from RMA order

    There is requirement to populate customer reference field  for credit memo generated for RMA order..
    In RMA order which filed i need to populate which will come as customer reference in credit memo.
    Please help me  to populate customer reference field from RMA orderes

    Hi Javier,
    Please check following site:
    http://help.sap.com/saphelp_crm60/helpdata/en/2e/b0da18dbe84ed9bdff9a5d6d91f531/frameset.htm
    Cheers,
    Gun.

  • BAPI for automatic clearing (similar to F.13)

    Hi ABAP Gurus,
    I need to create a  new program that should be able to clear by comparing the ASSIGNMENT filed of the payment document (DZ) against the REFERENCE field of the installment invoice (II). 
    With this, do you know a BAPI that I can use for this?  I assume this BAPI will be similar as to how F.13 works.
    Thanks for your inputs.
    Regards.
    Brando

    As Brad confirm, the F.13 processing will pick up 1:N or even N:N open items and clear them based on your criteria... one site I work up sometimes builds up a mix of several hundred debits and credits within individual customer accounts over a couple of months before these clear off.
    One thing to be aware of with FB05 is where you might have several open line items on the same document as the transaction's default logic will bring in all of these into the list of items to be cleared so your code would need to be able to deselect the ones you don't want - it may not be a situation that affects your scenario, but it needed some careful programming (plus I set up an additional sort option for the line item matching dynpro).
    Another approach that I haven't tried is that used within F.13 itself - if you drill down into the code far enough you will see the SAP code does Call Transactions itself - but prior to the call it exports a list of items to a memory id, so I assume you could also try this technique - just never tried myself.
    But, like Brad, I'd try to get the ZUONR set correctly on all the line items via substitution or whatever ... we also built a simple utility for one site that allowed the A/R end users to change just that field in bulk (list entries, select items, popup screen to collect new Assignment value, then BDC / call trans to FB02 to zap it) just so the automatic clearing could do the hard(er) multi-line clearing work for you.
    Jonathan

  • Reference Field for Document Type AB has made Mandatory

    Dear Experts,
        In OBA7, for Document Type AB (Accounting Document) I had clicked the Reference Number Field Check Box (Made it mandatory)
        So it became mandatory every time to enter the Reference Number when using the Document Type AB
        Now I am facing the problem, when using the T Code F-44 (Clear Vendor - Header Data) the system is popping an Error Msg, " For Document Type AB, an entry is required in field Reference "
         Since their is no Reference Field available on the screen, where should I enter the data for the same
        I am unable to understand How this issue can be resolved, I tried a lot but failed to get a solution
         Their is Reference radio button available on Additional Selections tab, but not field
    So please help ..!!
    Regards, Nimish

    Dear Manmay,
          You are correct but the system is not allowing what you have suggested
          When I enter the vendor no. and click on Goto-Document Overview, the system pops the error message and doesnt allow me to enter anything on that screen
         Please try at your end and revert boss
        I think I may require to raise an OSS note for this
    Regards, Nimish

  • Program details / T-Code for automatic clearing for AP Check  Encashment

    Hi Friends,
    Please provide me the details of the std program used or (if t-code is there) for the AUTOMATIC CLEARING for AP Check Enchasment) . I am trying in SDN , but could not find.
    Thanks in advance.
    Vengal Rao.

    hi
    RFEBCK00 (t-code FF.5)
    Cashed Checks (FCKR)
    with regards,
    ramanuja chary
    Edited by: Ramanuja Chary Sripada on Mar 22, 2010 9:20 PM

  • Reference table / reference field for currency/quantity field in tables.

    Hello Sap Experts ,
    Am a newbie and not able to make head or tail of what reference table and reference fields are when related to currency / quantity fields.Someone if could explain to me with a small example it would be great.

    Hi,
    The currency and quantity field always require a reference table and field so that they can be entered in correct format.
    Whenever you use currency and quantity field while creating the table you need to provide their respective reference field and table.
    whenever you use currency and quantity in scripts or smart forms you again have to receive their value using variables referring to their reference table and reference field.
    hope it must have cleared some of your doubts.
    Thanks,
    Abhi

  • Mandatory field - Header text and Reference field  for company code

    Hi
    In transaction code FB60, I want to make header text and reference field mandatory at the company code level.
    For one company code , the header text and the reference field should be made mandatory but for the other 8 company codes , those fields should not be mandatory.
    if I make the fields mandatory via the document type , then it will be applicable for all the company codes using the document type.
    thanks in advance
    Kind regards
    sap student

    Hi Chintan
    I have written the validation rule and it is working fine.
    Thanks
    kind regards
    sap student

  • Additional Reference Field for Journal Posting

    Hi,
    1. I would like to have other 2 additional reference fields (not exceed 10 characters) for Journal Posting.
    Other than Assignment field, Reference, and Text field
    2. For assignment field, if I didn't key in anything, why sometimes this field auto input the date for me?
    Kindly advice.  Thank you.
    Sirirak

    Hi
    1) Make use of Reference field 1,2 & 3
    2) Assignment field would be default populated by values based on 'Sort key' stored in respective GL master
    Thank You,

  • How to update Reference field in the clearing document

    Hi Friends,
    While accounitng for billing document for sales Reference Key 2 is used for a data.
    Now when the payment is recieved from customer and accounted, how to update the Ref 2 automatically from the primary document.
    Pl, suggest.
    Thanks
    NNS

    Hi Robert,
    Thanks for answering.
    I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
    Ex: Billing document is created and accounted. Ref 2 is AB
    Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
    Thanks
    NNS.

Maybe you are looking for

  • PO CNV: Auto-Create POs from PUR Reqs generated by OM

    Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders?  Question: Is it possible to convert the sales orders first.  Then run requisition import to create the purchase requisi

  • Apple wireless keyboard isn't working on fresh Windows 7 Boot Camp except in safe mode

    OK so yesterday I decided to reinstall Windows 7 to my mid 2011 27 inch iMac. I've had Windows 7 on it for a couple years but it got so bogged down that I wanted to start from scratch. However once I finished installing all of the Boot Camp 5.0 drive

  • Help me I lost everything media!

    on my iphone4s i lost my pictures and videos on my pc window 7 after my last backup where are they?

  • Using 'REUSE_ALV_FIELDCATALOG_MERGE'

    Hi, I am facing problem with 'REUSE_ALV_FIELDCATALOG_MERGE'. when i execute the following code, IO get the message ' Field Catalog Not Found'. What could be the problem? *& Report  Y_NORMAL_ALV2 REPORT  y_normal_alv2. TABLES : equi. TYPE-POOLS : slis

  • Captivate Not Recognizing Mouse

    On my MacBook using Captivate 5.5, the trackpad clicks and scrolls will be recorded. However, my Logitech mouse clicks and scrolls will not be recorded. Does anybody else have this problem or have a solution?