Reference Guide is not available while creating new contract

Hi All,
I have requirement to change the description of Contract Document Name in order to show naming guidelines as description.
I am unable to RG button at the top when I am trying to create a contract document from Contract documents tab of agreement, So I am unable to see which field is used for name.
If I am doing changes for Contract document page customization then its displayed in contract document page but not in contract document tab of agreement.
Please help me in changing the description in contract documents collection in Agreement.
Regards,
Prabhat

Hi,
As you pointed out correctly, RG is not visible in the scenario when you try to UPLOAD a contract document via the Contract Documents tab.
While you can change the Flyover text of the Description field on the Contract documents UI, you will not be able to change the same for the Description field which shows up when you Upload a Contract document.
I do see that apart from the Effective and Expiration date fields on that page, none other have any hover text at all.
You might want to try the Toolbar Customization technique but the caveat with that will be that anywhere the Description field is referenced across the application, the flyover text on that will change.
Hope others can chime in with their ideas as well.
Thanks,
Vikram Shukla

Similar Messages

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

Child domain not available when creating new mailbox in Exchange 2010

I’ve
installed Exchange 2010 in my environment with a single existing Exchange 2003
server. All current mailboxes are on the child domain. We have 1 root domain
(rootdomain.com) and 1 child domain (child.rootdomain.com). Currently,
we're in the coexistence phase and mailflow is working as expected. Today,
I created a new mailbox using EMC on Exchange 2010 and noticed that the
child domain is not available. Only the root domain is available?
Hopefully, I do not need to reinstall Exchange 2010. How do I go about adding
the child domain?

Did you domain prep the child domain?
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
From a Command Prompt window, run one of the following commands:
Run setup /PrepareDomain or setup /pd to prepare the local domain. You don't need to run this in the domain where you ran Step 3. Running
setup /PrepareAD prepares the local domain.
Run setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Run setup /PrepareAllDomains or setup /pad to prepare all domains in your organization.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Oracle not available while creating RAC database

Hi,
I have got 2node Oracle 10gR2 RAC installed on solaris 10 and am using NFS for keeping clusterware and database files.
cluvfy with pre dbinst option ran successfully.
Now while creating RAC database through DBCA, I am getting Oracle not Available error message. No relevant message written in alert log.
Can you suggest me as to what to do to resolve the issue please.
Thanks in advance.

Do you see any kind of logs under $OH/cfgtool*/dbca/..may be it will help with some pointers. If that doesn't give any useful information, try to startup nomount the instance using a sample init.ora file to see if reports anything in the alert log.
Thanks
-Chandra

Characteristic infoprovider not available while creating query

Hi All,
I have a characteristic infoprovider(user defined) in both Dev and Prod(transported-same properties), i can create new query in dev using query designer(BI 7) but not in production.
It is defined as infoprovider in the business expl tab of info object.
Query designer
when I search for this infoprovider in prod - No records found.
I checked thru info area still not able to see in query designer- production, it is not authorization relevant also.
Please let me know any possible scenarios.
Thanks
Jagadeesh

Hi,
I hope you are choosing 'create query' after opeing query designer and not 'open query'. If you select 'open query' then it shows only those info-areas and info-providers on which query is already there.
If this is not the case, can you see your characteristic in the info-provider tab?
Regards,
Akshay

Gmail account not available when creating new event

Good evening all,
I have not seen this issue reported yet, so I thought I would throw it out there in case someone else has encountered it.
I set up my GMail account (email, contacts and calendar) and am able to get my events via CalDAV. I can also set it as the default calendar when creating events. However, when I actually open the calendar to create an event, when I first touch the calendar it shows as the colour of my Gmail calendar, second touch opens the edit screen and my Gmail account is not there. If I save the event, it gets added to the local calendar.
I have 3 calendars outside of the local calendar - a work one via ActiveSync, my Gmail one and another Gmail one added as CalDAV which is my wife's Gmail calendar - this one shows as available in the drop down, but not my Gmail one. The descriptions are unique.
I did have to remove my Gmail calendar due to the "unable to authenticate" issue that others noted, so I don't know if that has anything to do with it. As I stated, it is pulling things down, is available to set as default, but no created events can be associated with it.
-m

Hello ironmike and welcome to the BlackBerry Support Community Forums.
To make sure I understand the issue, you removed your Gmail account from your device as were getting an error "Unable to Authenticate". But, when you go to your Calendar and tap on an entry, it shows the colour of your Gmail account and when you go to edit the appointment, it uses the Local calendar to save the appointment and not Gmail?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

Error while creating new release groups in PO release strategy

Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan

Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic     Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class     After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order     In this step four processes involved.o     Release Groupso     Release Codeso     Release indicatoro     Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group     In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code     In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator     In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy     *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh

PDF Error while creating New PCR

Hi All,
i am getting belolw error while creating new PCR, it suppose to open PDF but with out opening it is giveing following error.
The initial exception that caused the request to fail, was:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://localhost:50000/AdobeDocumentServices/Config?style=document"
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
Request you guide me to resolve this problem
Thanks,
Srinivasu.Y

Hello Srinivasu,
It seems your Adobe configuration is not correct. Please use SAP note 944221 for troubleshooting.
Also go through online help documentation-
http://help.sap.com/erp2005_ehp_04/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm
Configuration: Business Package for Manager Self-Service->Configuring Adobe Document Services
Regards
Pooja

Attachment of another PO while creating New PO

There was one Standard PO 8100000299 available with Two attachments.
Now, when I had open Attachment List to attach document while creating new Service PO, attachments of PO 81/299 was already there and new attachments added to PO 81/299, not to newly created Service PO.
Kindly resolve this issue.

One standard PO 81/299 was already there with Two attachment documents.
Now, when I am going to attach documents while creating new service PO, attachment list of PO 81/299 opened instead of blank list and new attachements will be added to 81/299 instead of newly created Service PO.

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Not able to create new folder in list/library sharepoint 2013 foundation

I am not able to create new folder in library and also not able to edit existing list item
Below is the error:
Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.NullReferenceException: Object reference not set to an
instance of an object. at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
m() at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
rols() at System.Web.UI.Control.EnsureChildControls() at
Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu() at Mi
crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
Please help.It happens only on few sub sites

Hi V_K04,
You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
Please check whether there are some differences between the subsites that worked well and the problematic subsites.
Whether this issue occurred on all libraries and lists on problematic subsites.
Whether there are some customizations in these problematic libraries and lists.
Please create a new library and a new list, test again, compare the result.
BestRegards,
Wendy
Wendy Li
TechNet Community Support

SBO0001 error DBD:ORA12154 error while creating new connection

Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
Mike

Mike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark

Error while creating new client

Hi,
recently i installed sap 4.7 in my system .
to create new client i copy the standard one and i assigned password .
While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
can any explian me how to resolve this
regards
babu

Hi. welcome.
dont worry. cool.
some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
thanks
karthik

Problem While Creating New system

Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.

>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required)

Reference Guide is not available while creating new contract

Similar Messages

Maybe you are looking for