REFERENCE KEY1 and 2

Dear Friends,
I have one issue
I made fields Reference key 1 and Reference key 2 mandatory field for invoice entry. And I posted invoice and entered data in Reference key 1 and key 2. when i run FBL1N i am able to get these data related Reference key 1 and key 2 . But when i run FBL3N G/L itemwise i am not getting data for these fields. I am able to get the fields by field selection but i am not able to get the value. That G/L account is my Recon account is assigned my vendor master.
Please suggest
Regards
babu

Ref Key 1 and 2 are at line item level.
Therefore you will need to enter the relevant information on the Vendor and all GL items.
Check the FSG for the P&L Accounts, you will need to make them mandatory as well. (However I would not recommend this)

Similar Messages

XREF1(Reference Key1) and XREF2(Reference Key2) in FBl5N report

what is the significance of XREF1(Reference Key1) and XREF2(Reference Key2) in FBl5N report. In my report I can see profit center being populated in most of the Reference Key2 values. But in some they are missing. So I want to know the significance of them, and how they are mapped. Please help me out.

Hi Prasana
As per your issue 1st you have maintain the required entry in filed status group level as well as at posting key level in the General TAB and select Reference specification 1/2 as a require entry after that you have to MAP in the T code OB32 at account type level
Eg: D        BSEG-XREF1        Reference key 1
       D        BSEG-XREF2        Reference key 2
      S      BSEG-XREF1           Reference key 1
      S      BSEG-XREF2           Reference key 2
      S      BSEG-XREF3           Reference key 3
Like above based your requirement you have to maintain
- Document change rules line item (TC: OB32)
- Posting key (TC: OB41)
- Field status groups (SPRO -> FI -> FI Global settings -> Ledgers -> Fields -> Define field status variants)
- Special field display (SPRO -> FI -> GL Accounting -> Master Data -> GL Accounts -> Line items -> Define Special Fields for Line item display)
- Doccument change rules header (SPRO -> FI -> FI Global settings -> Document -> Rules for changing documents -> Document change rules, document header)
After that while you posting any transaction data you have to enter reference key1 and 2 filed at more data Tab where you can see at header level tabs
Finally you can able see in the FBL5N report...same case we have faced previously it was resolved
I hope it will helps you
Thanks and Regards
sudharshana vamsi

How to update Tr code FB02   and update the field reference key1 (bseg-xref

Can any body
help me how to update   Tr code   fb02
and update the field reference key1 (bseg-xref1) with the interest amount
calculated.
Below i have written My program flow logic
The program should read the open items i.e debit items in the customer account,
Based on the invoice date and customer payment terms calculate the due date and then the interest should be calculated on that item based on the due date.
Use the transaction fb02 and update the field reference key 1 (BSEG-xref1)
with the interest amount calculated
Only consider customers whose interest indicator knb1-vzskz = 'vk'.
Interest is to be calculated for every 30 days
at the rate of 1% .please see example below.
Document date is 01.01.2007
for amount 1000SGD   payment term 7 days
It becomes due on 08.01.2007
until 06.02.2007 you should not consider for calculation of interest
SGD on   7.02.2007 run you can consider this item for interest calculation

Hi Robert,
Thanks for answering.
I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
Ex: Billing document is created and accounted. Ref 2 is AB
Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
Thanks
NNS.

Excel Get ActiveX References.vi and closing references -- grrr

I'm new to ActiveX stuff, but eager to learn!
The "grrr" in my Subject line is a reference to how I feel about LabVIEW's documentation from time to time. I'm a dinosaur who came from text-based programming, and did a fair amount of C coding, so sometimes with LabVIEW I'm left with this awful feeling in the pit of my stomach like, "Good grief! How much memory must LabVIEW be hogging up in the background when I use this vi?" or "What happens to those variables (wires) in that subVI when it completes but doesn't close? What are their statuses when I come back in the next time?" or "What if I put a lot of elements into that array the first time and then started from element zero the second time and just put in a few? What has happened with the memroy that was allocated when there were a lot of elements?"
Today I'm stewing about this "Excel Get ActiveX References.vi," and what happens to the "ActiveX references" it generates each time I call the subVI in which "Excel Get ActiveX References.vi" lives. I think that at least one of the "ActiveX references" it generates when I call it is of the type Excel._Application. Then there appears to be an Excel._Workbook, and others. You see, I've used "Excel Easy Report.vi" to put some data into an Excel spreadsheet, and I want to tell Excel to do a "Save" on the open spreadsheet. I think ActiveX is the (a) right way to do that, so I'm wading into the ActiveX fray... But this "Excel Get ActiveX References.vi" says in its help file, "Do not close ActiveX references opened with the Excel Get ActiveX References VI. References must remain open until the report is closed. Otherwise the error 3001 will occur." Well, these Excel workbooks that get created by my VI could well stay open until after my LabVIEW VI terminates!
So (finally), here are some of my quesitons:
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existance. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
Well, thanks for reading my novel. I don't know what can be done with LabVIEW documentation to make it more satisfying to folks like me, but perhaps someone can weigh in on all my ActiveX questions here.
Thank you in advance,
Steve Brady
Solved!
Go to Solution.

You need to close EVERY ActiveX reference you open. If you don't you'll end up with some Excel processes running even after LabVIEW exits. You can see them in Task Manager.
I, personally, don't like the LabVIEW Report Generation Tool Kit for working with Excel. I don't think it's flexible enough. I have a growing library of VIs that I've written that open, manipulate, and close Excel. Some references I pass from VI to VI and some I close right after I use them. It all depends on what I'm doing. If I want to enter read or write data from/to a certain range I'll get the range reference, read or write the data, then close it right away because I have no use for it any more. On the other hand, when I open Excel or a Workbook I keep the reference until I'm done, which could be later in the program.
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existence. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
1) No, LabVIEW will NOT close those references. You need to make sure that happens.
2) You can save the references in a functional global or use a class but if you're not going to save them close them as soon as you're done with them.
3) Your user should not be able to close your LabVIEW application without it going through the shutdown routine you've created for your program. The ABORT button should never be exposed to the user and you should capture and discard the panel close event so your program ALWAYS shuts down is an orderly fashion. If you don't you will have fragments of Excel hanging around in your operating system and will have to kill those processes using Task Manager. That should only be a problem during development, not once deployed.
I used to program in C and Assembly many moons ago. You should have seen my first LabVIEW code. I go back and look at it just so I can see how far I've come in the last 12 years. I feel your pain.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

Diff b/w reference type and elementary type

hi all
can any one what is the diff b/w reference type and elementary type in data element ....
thanks
lokesh

The data type attributes of a data element can be defined by:
Specifying a domain whose attributes are copied by the data element.
Specifying a build-in type where the data type, number of places, and possibly decimal places can be directly specified.
Specifying a reference type, i.e. reference to a class, an interface, a type defined in the Dictionary, a built-in type, or a generic reference to ANY or DATA.
In the maintenance screen you can set the option you require by setting the appropriate flag (domain, built-in type, reference type) and filling in the corresponding input fields.
A reference type is a reference to another type. There are the following kinds of reference types:
Reference to a class or an interface
Reference to a type defined in the Dictionary
Generic reference to ANY, OBJECT, or DATA
Reference to a built-in Dictionary type with specification of the length and possibly also the decimal places
You can use a reference type to define the data type properties for a data element, or for typing the component of a structure or the line type of a table type.
In the field Referenced type, enter the name of a class, an interface, the generic references DATA, OBJECT, ANY, or the name of a type defined in the Dictionary. If the reference type is to be a predefined Dictionary type, choose the reference to the predefined type. Enter the number of characters and, if required, the number of decimal places.
where as
The data class describes the data format at the user interface.
If a table field or structure field or a data element is used in an ABAP program, the data class is converted to a format used by the ABAP processor. When a table is created in the database, the data class of a table field is converted to a corresponding data format of the database system used.
You can find a detailed description of the data classes allowed in the ABAP Dictionary in Overview of the Data Classes.

Reference field and table for AUFK for F4 help in alv.

Hi All,
   I need to put F4 help on ALV for order no (AUFK) what is the reference field and table for that?
i tried giving field as aufk and table as ccss but its not working.
   ls_fcat-ref_field = 'AUFNR'.
    ls_fcat-ref_table = 'CCSS'.
Thanks & Regards,
Ruchi Tiwari

Hi,
Try this.
Set the f4 help for the field in the fieldcatalog
ls_fcat-f4availabl = 'X'.
1. Create a event of ONF4 for the alv grid.
2. Set the event handler.
3. Append the field for the F4 help in the internal table and call the below method
    CALL METHOD g_mprn->register_f4_for_fields
    EXPORTING
      it_f4 = i_f4.
4. create a class definition and implementation
    refer sample pgms (BCALV_F4, BCALV_GRID_EDIT_DELTA and BCALV_GRID_EDIT)
Hope this may be helpful.
Regards,
Sharin.

Key Figure Reference table and fields

I am getting the following error:
/BIC/CSSMMIMI1-/BIC/KFMI_LCHF (specify reference table AND reference field)
I am aware that it is asking me to put a reference table and field for the field in the structure.
However, what I am not sure about is should I do this action from SE11 or is there a program or other method which would be more suitable (this is not business content)?
Thanks

Hi Edwin,
Thanks for that, the currency type and quantity type are hard coded in the key figure for most of the key figures apart from one, i.e for the quanity I hard code PCS
From RSD2 I just check the repair option is that correct

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

Problems with creating reference system and user mapping in EP

Hi@all,
we have deployed Support Package Stack 25 in our portal. After that, the UWLJWF Administration was not available anymore. We get Portal Runtime Error. We habe resolved this error!
In the UME Administration in the System Administration --> System Configuration --> UME Configuration --> User Mapping tab
there was a message saying that CTS was non-existent. I changed the Reference System to (No reference system) and the UWL Admin page is working now!
But now, the SSO to our 3rd Party System is not possible anymore!
I have created an new system alias but i cannot see it in the User Mapping tab. How is it possible. I found no documentation?
Thany you and best regards
Juergen

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

The truth about objects, references, instances and cloning (Trees and Lists

Hello
As a few of you may have know from my postings over the past few weeks, ive been building my first real java ap and trying to learn along the way, hitting a few snags here and there.
One main snag i seem to have been hitting a fair bit is objects and instances, im kinda learning on how they work and what they mean but as a php programmer it seems to be very different.
as pointed out to me if you have objectA=objectB then in php you have two objects that share the same value but in java you have still one object value and one object pointing to the value.
sooo my first question is
if i have this
Object objA=new Object()
Object objB=objA()then object A creates a new memory allocation for the object data right? and object B is simply a reference to the object A memory allocation right?
so therefore there is no instance of objectB? or is there an instance of object B but it just takes up the same memory allocation as object A?
anyway, what is the point of being able to say objB=objA what can that be used for if not for making a copy of an object (i understand now that it doesnt copy an object)
My second question (which i think i actually understand now, but im posting it to see if the answers may help others)
If i have a List structure (e.g. arraylist) then when i add a datatype such as a treemap does it not add the changed treemap, ill try and explain with code
ArrayList mylist=new ArrayList()
Treemap myTree=new Treemap()
myTree.put("hello","howdy");
myTree.put("bye","cya");
mylist.put(myTree);
System.out.println(mylist.toString());
myTree.put("another","one");
mylist.put(myTree);
System.out.println(mylist.toString());now to be honest ive not actually tried that code and it may actually procude the right results, but from my experience so far that similar sort of thing hasnt been working (by the way i know the above code wont compile as is :p)
anyway what i assume is that will output this
[Hello,howdy,bye,cya] <<this is the first system out
[Hello,howdy,bye,cya,another,one <<this is the second system out
Hello,howdy,bye,cya,another,one] <<this is the second system out
where it should produce this
[Hello,howdy,bye,cya,
Hello,howdy,bye,cya,another,one]
Why when I update the treemap does the arraylist change, is this because the thing that is being put in the array list is infact not an object but simply a reference to an object?
thanks for everyones help so far :)

as pointed out to me if you have objectA=objectB then
in php you have two objects that share the same value
but in java you have still one object value and one
object pointing to the value.Some years ago, I built a small website managing data saved in an XML file using PHP. Being used to Java, I used an OO approach and created classes managing data structures and having setter/getter methods. The fact that PHP did actually create a copy of any object being passed as and argument made me crazy. This way, I wasn't able to reach the same instances from several different places in my code. Instead, I had to put a certain operator ("&" I think) before any reference to force PHP not to make a copy but pass the reference. I also found a note on the PHP site saying that copying was faster than passing the reference, which I actually couldn't believe. If I'm not wrong, they changed the default behaviour in PHP5.
if i have this
Object objA=new Object()
Object objB=objA()then object A creates a new memory allocation for the
object data right? and object B is simply a reference
to the object A memory allocation right?The statement "new <Class>" allocates memory. The reference itself just takes up a few bytes in order to maintain some administrative data (such as the memory address). References are basically like pointers in C, though there's no pointer arithmetics and they can't point to any arbitrary place in memory (only a legal instance or null).
so therefore there is no instance of objectB? or is
there an instance of object B but it just takes up
the same memory allocation as object A?There is an instance of objectB, but it's just the same instance that objectA is pointing at. Both references objectA and objectB contain the same memory address. That's why they'd produce a result of "true" if compared using the "==" operator.
anyway, what is the point of being able to say
objB=objA what can that be used for if not for making
a copy of an object (i understand now that it doesnt
copy an object)Sometimes you don't want to make a copy, as 1) it consumes more memory and 2) you'd lose the reference to it (making it more difficult to tell what instance is actually accessed). If there was no way to pass a reference to an object into a method, methods wouldn't be able to affect the original instance.
Why when I update the treemap does the arraylist
change, is this because the thing that is being put
in the array list is infact not an object but simply
a reference to an object?The ArrayList doesn't change at all. It's the instance that's being changed, and the ArrayList has a reference to it.

Reference Table and Fields for Units and Currency

Can anyone advise on what the reference tables and fields are for currency and quantity key figures? Thanks
I think for currency the table is TCURC and field is WAERS, does this make sense, not sure for the quantity though
Message was edited by:
        Niten Shah

Hi try these -
TCURC          (Currency codes)
TCURF          (Translation factors)
TCURN          (Notations)
TCURS          (Exchange Rate Spreads)
TCURT          (Description of the Currency Code)
TCURV          (Exchange rate types for currency translation)
TCURW     (Use of exchange rate types)
TCURX          (Decimal places of the currencies)
Regards
Vikash

Identify reference Table and filed for...

Hi
How to identify the Reference table and field for the particular Currency and quantity field.
Regards
Raghav

Hi there,
if you want to find out the reference table and field for the particular currency or date field follow the steps given below.
1. tcode SE11 and give the table name,
2. double click on the dataelement for which you would like to findout the details.
3. Place the cursor on the dataelement name and click on the Whereused button
Utilities --> Where-Used list.
4. Uncheck all the checkboxes and check Table Fields.
5. Hit Enter, that should give you all the tables and fields where this dataelement is being used.
6. You can mention any of the tables as a reference table or fields.
Hope you found this useful.
Thanks-
Rahul.

Reference table and field

Hi Experts,
When I am adding a new field NETWR in the structure to enhance the datasource and checking it, I am getting the following error:
SPECIFY REFERENCE TABLE AND REFERENCE FIELD.
How to over come this error?
Kindly help me,
Thanks in advance,
Kannan

Kannan,
there will be reference fields specified in the table for this field - specifically currency / unit fields - you need to have these in your view to be able to activate the datasource.
search the forums on the same also....
Within the view - check the currency / units tab available in SE11.
Edited by: Arun Varadarajan on Jun 9, 2009 1:18 AM

The difference of HS.trans reference:Rate1 and Rate2

Hi,
   I am a new for HFM. I want to know what are the difference of hs.trans reference:Rate1 and Rate 2.
   Hs.Trans("DestPOV","Source POV","Rate1","Rate2")
   Thanks for your reply anvanced.

To add a slice from the functional side;
HS.TRANS is used to override the default translation based on the accounts defined in the application settings. One reason to override specific accounts to to stop the translation from occuring. This being the case where an application currency value has been entered in an entity which currency is different than the application currency. Which is often the case with Investment accounts. In this case the (RATE1, RATE2) is coded as "1", " ". There are other occasions where you need to have the translation execute basaed on the change of two rates, say for movements. In these cases the rate accounts are subtracted from one another.
Happy Coding,

Reference partitioning and partition pruning

Hi All,
I am on v 11.2.0.3.
I have a pair of typical parent-child tables. Child table is growing like hell, hence we want to partition it, which will be used for deleting/dropping old data later on.
There is no partitioning key in the child table which I can use for relating the data to the time when data was created. So, I thought I can use the timestamp from parent table for partitioning the parent table and reference partition the child table.
I am more concerned about the child table (or the queries running on the child table) in terms of performance. ITEM_LIST_ID from the child table is extensively used in queries to access data from child table.
How will partition pruning work when the child table is queried on the foreign key? will it every time go to the parent table, find out the partition and then resolve the partition for child table?
The setup is given in the scripts below, will it cause lot of locking (to resolve partitions)? or am I worrying for nothing?
Here are the scripts
CREATE TABLE ITEM_LISTS /* Parent table, tens of thousands of records */
ITEM_LIST_ID    NUMBER(10)     NOT NULL PRIMARY KEY, /* Global index on partitioned table !!! */
LIST_NAME       VARCHAR2(500) NOT NULL,
FIRST_INSERTED TIMESTAMP(6)   NOT NULL
PARTITION BY RANGE ( FIRST_INSERTED )
partition p0 values less than ( to_date('20130101','YYYYMMDD') ),
partition p201301 values less than ( to_date('20130201','YYYYMMDD') ),
partition p201302 values less than ( to_date('20130301','YYYYMMDD') ),
partition p201303 values less than ( to_date('20130401','YYYYMMDD') ),
partition p201304 values less than ( to_date('20130501','YYYYMMDD') ),
partition p201305 values less than ( to_date('20130601','YYYYMMDD') )
CREATE INDEX ITEM_LISTS_IDX1 ON ITEM_LISTS ( LIST_NAME ) LOCAL ;
CREATE TABLE ITEM_LIST_DETAILS /* Child table, millions of records */
ITEM_ID        NUMBER(10)     NOT NULL,
ITEM_LIST_ID   NUMBER(10)     NOT NULL, /* Always used in WHERE clause by lots of big queries */
CODE           VARCHAR2(30)   NOT NULL,
ALT_CODE       VARCHAR2(30)   NOT NULL,
CONSTRAINT   ITEM_LIST_DETAILS_FK
FOREIGN KEY ( ITEM_LIST_ID ) REFERENCES ITEM_LISTS
PARTITION BY REFERENCE ( ITEM_LIST_DETAILS_FK )
CREATE INDEX ITEM_LIST_DETAILS_IDX1 ON ITEM_LIST_DETAILS (ITEM_ID) LOCAL;
CREATE INDEX ITEM_LIST_DETAILS_IDX2 ON ITEM_LIST_DETAILS (ITEM_LIST_ID, CODE) LOCAL;Any thoughts / opinions / corrections ?
Thanks in advance

To check how partition pruning works here, I inserted some data in these tables. Inserted data in ITEM_LISTS (parent) from DBA_OBJECTS ( object_id => item_list_id, object_name => list_name, first_inserted => manually created). Also created corresponding child data in ITEM_LIST_DETAILS, so that, for every item_list_id in parent about 5000 records go in child table.
Looking at the queries and plan below, my question is, what exactly does the operations "PARTITION REFERENCE SINGLE" and "PARTITION REFERENCE ITERATOR" imply ??
I gave a search on "PARTITION REFERENCE ITERATOR" in Oracle 11.2 documentation, it says "No exact match found" !!
/* Direct query on child table */
SQL> select count(*) from item_list_details where item_list_id = 6323 ;
COUNT(*)
      5000
1 row selected.
Execution Plan
Plan hash value: 2798904155
| Id | Operation                   | Name                   | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT            |                        |     1 |     5 |    22   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE             |                        |     1 |     5 |            |          |       |       |
|   2 |   PARTITION REFERENCE SINGLE|                        | 5000 | 25000 |    22   (0)| 00:00:01 |   KEY |   KEY |
|* 3 |    INDEX RANGE SCAN         | ITEM_LIST_DETAILS_IDX2 | 5000 | 25000 |    22   (0)| 00:00:01 |   KEY |   KEY |
Predicate Information (identified by operation id):
   3 - access("ITEM_LIST_ID"=6323)
SQL> select * from temp1; /* Dummy table to try out some joins */
OBJECT_ID OBJECT_NAME
      6598 WRH$_INTERCONNECT_PINGS
1 row selected.
/* Query on child table, joining with some other table */
SQL> select count(*)
2 from temp1 d, ITEM_LIST_DETAILS i1
3 where d.object_id = i1.item_list_id
4 and d.object_name = 'WRH$_INTERCONNECT_PINGS';
COUNT(*)
      5000
1 row selected.
Execution Plan
Plan hash value: 2288153583
| Id | Operation                      | Name                   | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
|   0 | SELECT STATEMENT               |                        |     1 |    70 |    24   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE                |                        |     1 |    70 |            |       | |       |
|   2 |   NESTED LOOPS                 |                        | 5000 |   341K|    24   (0)| 00:00:01 |       |       |
|* 3 |    TABLE ACCESS FULL           | TEMP1                  |     1 |    65 |     3   (0)| 00:00:01 |       |       |
|   4 |    PARTITION REFERENCE ITERATOR|                        | 5000 | 25000 |    21   (0)| 00:00:01 |   KEY |   KEY |
|* 5 |     INDEX RANGE SCAN           | ITEM_LIST_DETAILS_IDX2 | 5000 | 25000 |    21   (0)| 00:00:01 |   KEY |   KEY |
Predicate Information (identified by operation id):
   3 - filter("D"."OBJECT_NAME"='WRH$_INTERCONNECT_PINGS')
   5 - access("D"."OBJECT_ID"="I1"."ITEM_LIST_ID")

REFERENCE KEY1 and 2

Similar Messages

Maybe you are looking for