Reference monitor defaults as ganged to Program monitor. Looking for fix.

I'm encountering an issue using PPro CC (7.2.2) where editing a clip into the timeline- either from the source window or from a bin- automatically opens the Reference monitor and has it ganged to the Program monitor.  I keep turning that off, but it happens again.
Is anyone having this issue?
Any easy ways to resolve?
Thanks
Mike

you could write a daemon method which would, every so often, search the forums for the keyword.
Better yet, you can use google's "site: bbs.archlinux.org keyword format to do your search.
But, be sure not to do it too often. If you keep banging a particular forum website too often, your ip might get banned.

Similar Messages

  • C# how can i get my program to look for reg install path once found copyfiles

    basically what im looking to do is make a installer for a program but its happens when you hit a button like install
    maya it will look for where the program is installed via
    reg path once found i want it to copy a few files to another directory
    also my old vision of my program i had a installer that would install a folder where all the stuff for maya install would be witch i usually put in the following directory
    C:\Program Files (x86)\maya 8.5 installer
    and i did all my file copys around that like filemove then that dir
    but had a lot of issues where people put it in different dir witch made my program
    useless is there also a way where you can get the program to look for a certain folder in a certain place sorry to be a pain and ask a couple of questions but want to resolve this issue

    Hi elfenliedtopfan5,
    This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.
    Discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Program to look for texts in reports (like EWK1)

    Hi, i need to look for a remote function used in crm but tx EWK1 doesn't exist in CRM, is there any program or report similar ??
    thanks in advance !!

    Hi, i need to look for a remote function used in crm but tx EWK1 doesn't exist in CRM, is there any program or report similar ??
    thanks in advance !!

  • CS5 Links - telling the program to look for .psd instead of .jpg

    Hi,
    I am using InDesign CS5 to create a book with over 900 images.  For the original book setup, .jpg images were used.  For the final, higher quality .psd versions are being used.  Is there a way that I can tell InDesign to look for the same image names, but in the format .psd instead of .jpg?
    - Kristen

    Brilliant, thank you!  Forums win again!
    If it had a choice to include subfolders, that would be even better, but this will work for me.
    Thanks again!
    EDIT:  The "Relink File Extention" option, directly below the "Relink to Folder" option, is exactly what I needed.   Cheers and thank you!

  • Looking for generic WebService for update date & time in my C# WinForm program

    hi
    looking for generic WebService for update date & time in my C# WinForm program
    thanks

    hi
    looking for generic WebService for update date & time in my C# WinForm program
    thanks
    Hello,
    I agree with Cor that since this forum is for issues related to winodws form controls and features, but this issue is mainly related to the webservice which is working for updating time, you could consider posting this issue on other site, or you could
    also consider creating your webservice by checking this document
    Your first C# Web Service.
    If you get any issues when create your webservice, you could post this issue in the following forum.
    http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Reference Monitor Stopped Working

    While working on a project I had to use "Interpret footage" to change the frame rate and pixel aspect ratio on a clip. After making the change, my reference monitor stopped working correctly.
    Prior to making the above frame rate change, I was using the reference monitor for a waveform analysis which would play smoothly on both the Program and Reference monitors. Once I made the clip change, I lost the ability for the reference monitor to play smoothly-- it only holds an image of a single frame. In order to see the clip play I have to hold down the right arrow button. The program monitor works fine. And yes, it is set to gang.
    The interpret footage command screwed something up. Any ideas?
    I'm using Premiere CS2 with XP Pro Service Pack 3. NVIDIA Quadro FX 1400 card, AMD Dual Opteron 254 processors on a Tyan Thunder mobo.

    Hey,
    I had this exact same problem!
    I know this is an old thread, but just incase someone comes along here looking for a working solution,
    Liquid80 from http://forums.adobe.com/thread/688529
    posted this answer,
    "Then  for some reason I decided to click on "Window" on the menu bar without  even thinking and then clicked "Program Monitor"!!! PROBLEM SOLVED!!!
    There  are TWO different views. One called "Program Monitor" and the other  called "Reference Monitor" and the annoying thing is they look nearly  identical but function differently!!!
    So all this time you had "Reference Monitor" open instead of "Program Monitor"."
    All the best

  • CS6 Using RGB Color Corrector effect, Reference Monitor will not update?

    When the current tine indicator is on a clip using RGB Color Corrector effect, the Reference window will not update.
    And not only doesn't it update the data on the graph, but if you change the type of scope (Display Mode) (e.g. from RGB Parade to Vectorscope), that also doesn't change until you move the CTI to view a clip without the RGB Color Corrector effect on.
    Anybody can help me to fix this problem, it is very important to me, many thanks!!!

    Take a look here: http://help.adobe.com/en_US/premierepro/cs/using/WSCB566F37-A8BA-4b43-8BD2-B6467AAE930E.ht ml
    Here the appropriate quotation from the help:
    Gang the Reference Monitor and Program Monitor
    You can gang the Reference Monitor and the Program Monitor so that both always monitor the same frame.
    Do one of the following:
    In the Reference Monitor, click the Gang To Program Monitor button .
    In the Reference Monitor’s panel menu, choose Gang To Program Monitor.
    In the Program Monitor’s panel menu, choose Gang To Reference Monitor.
    Both Monitors show the same frame. Moving the playhead in either the Reference Monitor, the Program Monitor, or the Timeline will move the playheads in the other two to the same frame.
    Regards
    Axel

  • Only showing frame in reference monitor that I am paused on

    This seems to have just started happening out of no where.
    My reference monitor is no longer playing through the project and showing each frame, it will only show the frames if I scrub through them or pause / start on them.
    All I did was put in a new audio track (which I removed but didn't solve the problem)

    One has never been able to play footage nor have realtime scopes in the reference monitor.
    You can only scrub to make it move.
    Only Source monitor and Program monitor play realtime.

  • Three monitors - two for Premiere, one as Reference, from Geforce GFX 570 - possible?

    My new system for Prodcution Studio CS5.5 has a Geforce GTX570 graphics card to which I've attached my two monitors (via DVItoVGA convertors)
    I've read posts on this forum where people have mentioned adding in an extra graphcis card to drive a separate reference monitor
    My question is, given the Geforce GTX570 has a mini-HDMI port and a Displayport as well as the two DVIs that I'm using, do I need a separate extra graphics card to run a a separate reference monitor in additon to the two 'program' monitors I already have?  I want to run a HD1080 screen from the mini-HDMI port as a reference monitor... but I've been reading around and I can't work out if this is possible, or whether I will need the separate graphics card to do this
    A related issue - if I can't run the third monitor from the GTX570, can I use the on-motherboard monitor outputs instead of getting an additonal graphics card?  The motherboard in this syetm is an Asus P8 Z68-V Pro with a Core i7 2600K chip in, and has (unused) a DVI and a mini-HDMI port - might these do for the Reference monitor?
    Finally, I also want to be able to use the reference monitor in After Effects - presumably this will not be an issue - there's no separate setup / workaround / other complication in doing this
    Your comments appreciated - I'm sure there must be other people out there who've encountered these questions -  I'm just trying to get as fully in-the-picture as I can before spending cash
    Thanks
    jON

    You'll need a second GPU, preferably the same or very similar to your primary one. The on-board GPU may work--it more than likely will if its an Nvidia GPU and you can use the same drivers, but I suspect it's probably Intel or something like that. There can be issues if you have two different GPUs from two different manufacturers installed simultaneously. Not saying for sure that it wouldn't work, but it's inviting headaches.
    After Effects doesn't use monitors the same way Pr does--specifically, it doesn't do a full-screen output to a second monitor that's attached via HDMI, DVI, etc. However, you could set up a workspace that maximized the Composition window on a second monitor, but it's not exactly the same effect.

  • 2 Reference monitors for Waveform/Vectorscope

    CS3 - Is there a way to add a second reference monitor? The first for waveform and the second for vectorscope? I don't care for the combined ones because they are too small. Also, is there a way to make it default to waveform every time PP starts instead of having to change it to that mode every time? Finally, what does it take to make them display realtime while the video plays?
    Thanks!
    C

    I don't think there is a way (I would love to learn there is, though).
    But you know what? I agree completely (and I made sure this was heard) that WFM and Vectorscope are the essential ones and that the existing combo options make them way too tiny. What we need is not a second reference monitor, but these two things: one one hand, more versalite combination options (so you can have whichever two you want, side by side). On the other, the scopes display shouldn't have a fixed aspect like it does now. It should resize, even deform, the scope display so that it fits horizontally as you drag the reference panel as you like.

  • Multi-cam vs. the Reference monitor

    I use multi-cam to cut two views together.
    Each view is in its own sequence, and those two sequences are the two tracks in the "multicam source"
    While viewing the "multicam destination" sequence,  I often use the Application-wide keyboard shortcut to "Toggle Multi-camera View".
    I like to keep the Reference Monitor up with some scopes on it while editing, to keep an eye on the relative color between the two cameras.
    Sometimes, the Reference Monitor pops back to "Composite" view, instead of my scopes.  It happens SOMETIMES when I use the hotkey to
    toggle Multi-camera view.
    Whether it changes the Reference Monitor view depends on which panel has focus when I hit the hot key!
    1) If the Program monitor has focus, and I hit the hot key to toggle Multi-Camera View, no problem, the Ref monitor stays on scopes as I want.
    2) If the Timeline panel has focus, then the silly Reference Monitor pops back to Composite View.
    FYI, I checked, and there is no specific Timeline panel hotkey using the same keystroke (I am using shift-6)
    Any idea if there is something to prevent the Ref Monitor from changing its settings from scopes to Composite like this?
    I doubt this is an intended behavior, probably just an odd edge case.
    I do see that the Program Monitor panel has an available keyboard shortcut called "Multi-Camera", but since I don't have the problem when focus is in the Program Monitor, I don't think this is relevant.  (I have it assigned to no keyboard shortcut right now).
    As a side note, It would be really nice if the program monitor could remember for each sequence whether it should be showing "Multi-Camera View" or not. 
    I often have to switch between looking at the multi-cam destination, and looking at other sequences... and it makes no sense that those other sequences should be viewed in Multi-cam mode, just because some other sequence was being viewed in multi-cam mode.   No?
    Keith
    Premiere Pro CC, Version 7.0.1 (105)
    OS X 10.8.5

    Right,
    So here was the problem, in case any of you people out there are going nuts with what appears to be a broken project.  
    In the timeline above the multicam layer, I was dropping in graphics. I was cutting and pasting them in.
    In order to do so I have to highlight the layer that I want to drop the graphics onto.
    As shown below.
    As soon as a layer gets a highlight other than the Multicam layer, the Program Monitor will no longer show multicam.
    Remove the highlighted layer as seen below.
    Hope this helps someone.
    Cheers..

  • Is Reference Monitor Real Time?

    I never questioned this before but is the reference monitor realtime?
    The behavior i get is....
    frames update when i scrub
    shows color changes
    freezes when i plat the SEQ
    It has always done that but I was wondering it it could play simultaneously with the SEQ. Its set to composite video now.

    Unfortunately, you cannot get live playback from both the Program and Reference Monitors simultaneously.  It's a design flaw, in my view, that greatly limits the usefulness of the Reference Monitor.  Please let Adobe know you'd like it corrected.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Reference monitor for digital cinema workflow

    We use the Digital cinema workflow to create 2K title sequences for theatres. We plan to ad a 2K reference monitor into our workflow. The problem is that the video-out path for preview on reference monitors is not color-managed.
    Is there a way to see a correct image on a referrence monitor in adjusting the monitor with LUTs?
    Where can I find the needed LUTs?
    Which monitor do You recommend?
    I use After Effects CS3, Mac OSX 10.5.5, 2x2,8 Ghz Quad-Core Intel Xenon, 6GB RAM, Blackmagic HDExtreme2, Grafic card ATI Radeon HD 2600 XT

    I'm trying to find out much the same thing. I would assume that anyone knows the answers can help both of us.
    I'm purchasing a new Mac Pro desktop. I also use final cut but not after effects.
    I actually have 4 monitors to choose from. 2 Dell 19" - One 27" Apple cinema display and a spector High Def 1080i monitor that has a DVI input.
    I would like to use one of the Dell's as my primary home desk top monitors with folders and all the usual dock and stuff. I would like to use the cinema display as my primary final cut work surface.
    I would like to use the HD monitor to show HD footage and use it as a client monitor. Remember it has a DVI input.
    I've talked with the folks at the Local Apple store and they are not sure if I will get a real HD signal on the HD monitor if I add a second radeon 2700 card to the computer and take on of those DVI outputs and attach it to the HD monitor.
    If thats not possible can I use the apple cinema display as my playback monitor?
    Or do I have to go with a conversion box like a mxo, AJA board, or decklink box.
    The goal is to have two monitors for the program and One monitor in HD for the client monitor,
    Thanks everyone in advance.
    Rich

  • FR: Reference Monitor Live Update

    *******Enhancement / FMR*********
    REFERENCE MONITOR LIVE UPDATE
    The Reference Monitor should update with every frame displayed, just as the Source and Program Monitor do.  This applies to playback as well as scrubbing.
    Why is this feature important to you?
    Live scopes AND program at the same time.  (How is it that at version 7, a 'professional' NLE still can't do this?)
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

    You've got me curious.
    Which ideas do you disagree with?
    http://forums.adobe.com/thread/1369235?tstart=60
    http://forums.adobe.com/thread/1369232?tstart=0
    http://forums.adobe.com/thread/1371240?tstart=60
    http://forums.adobe.com/thread/1369233?tstart=60
    http://forums.adobe.com/thread/1369239?tstart=60
    http://forums.adobe.com/thread/1369263?tstart=60
    http://forums.adobe.com/thread/1369265?tstart=60
    Are there any you do agree with?

  • Program Monitor looks like it changed ratio

    I started in 1920x1080, but after editing videos and saving a few times I looked up and the program monitor looks something like 1920x800!  Any suggestions? I made no changes and cannot seem to find a way to display 1920x1080 again.  Thank you all for the help.

    The Program Monitor reflects the Sequence.

Maybe you are looking for