Reference no not picks

Hai sapians,
t- code - ML81N(SERVICE ENTRY SHEET ) additional data filed reference no has been entered,then po has done ,in that item category is D,in ME21N invoice tap tick mark has been selected for service base invoice,ers,gr .after that while doing MIRO basic data tap reference no hasnotbeen picking from ML81N.instead of it picks IV document no.
why didnot pick the ML81n reference no in in MIRO basic data tap reference no?
kindly give solutions.
thanks in advance.

Dear friend
ML81N reference no -field name XBLNR,table name INFO,
MIRO reference no -field name XBLNR, table name ESSR.
both reference field is same.also this is service based invoice ,so reference no MUST pick from ML81N while doing MIRO.kindly tell any other way.
thanks .
saravanakumar.

Similar Messages

When I want to scroll through My picks why do I get this Error message (A necessary data reference could not be resolved."

When I want to scroll through My pictures why do I get this Error message (A necessary data reference could not be resolved)

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

MM: PO Not Picking up PR Having Multiple Line Items

Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
Sudheer

HI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer

TANN item category item not picking for return sales order

Hi all,
I have a question regarding TANN item category. This TANN item category item is not picking for return sales order type. As far as i know RENN is the free goods for return sales order. Can you please clarify the above question further

Hi
If you are making return order by copying sales order then please see this procedure also.
Try to check in the copy control also.
Go to the following path IMG u2013 Sales and Distribution u2013 Sales u2013 Maintain Copy control for sales documents. (Tcode VTAA)
Select copying control : sales document to sales document.
Search your return delivery order from the reference sales document type.
Then select the item from the left side Colum.
Go and find out TANN item category and click on detail.
Check out Item Cat proposal. If it is empty then type your RENN condition type over here.
Now try to create the return sales order it might work.
Raj.

Dynamic JNDI in FTP Adapter | jca.jndi property not picked by Adapter

Hi,
I am trying to pass jndi dynamically to FTP adapter using the steps mentioned in http://blogs.oracle.com/adapters/entry/changing_the_connection_factory_jndi_dynamically_in_ftp_adapter.
I have configured FTP jndi(eis/Ftp/SoaFtpAdapter) at app server.
And included the following property in the invoke activity that calls the FTP adapter
<bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>
Invoke activity definition looks as following
    <invoke name="Invoke1"
            partnerLink="FTPFileListAdap" portType="ns3:FileListing_ptt"
            operation="FileListing"
            inputVariable="Invoke1_FileListing_InputVariable"
            outputVariable="Invoke1_FileListing_OutputVariable"
            bpelx:invokeAsDetail="no">
      <bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>
      <bpelx:toProperties>
        <bpelx:toProperty name="jca.ftp.Directory" variable="directoryName"/>
      </bpelx:toProperties>
    </invoke>FTP Adapter jca configuration is as following
<adapter-config name="FTPFileListAdap" adapter="FTP Adapter" wsdlLocation="FTPFileListAdap.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/Ftp/SoaFtpAdapter12" UIincludeWildcard="*.txt"/>
<endpoint-interaction portType="FileListing_ptt" operation="FileListing">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec">
      <property name="PhysicalDirectory" value="/in/dev"/>
      <property name="Recursive" value="true"/>
      <property name="IncludeFiles" value=".*\.txt"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>While calling the BPEL i am passing two parameters
jndiLocation = eis/Ftp/SoaFtpAdapter
and
directoryName = /in/dev
Following is the fault that I am getting while executing the BPEL.
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault>
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'FileListing' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. RunTimeConfigFTP:FTPFileListAdap [ FileListing_ptt::FileListing(Empty,filelist) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/SoaFtpAdapter12'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/SoaFtpAdapter12. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>
</part>
<part name="detail">
<detail>JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/SoaFtpAdapter12'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/SoaFtpAdapter12. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server </detail>
</part>
<part name="code">
<code>12510</code>
</part>
</bindingFault>
</bpelFault>
</fault>It seems that FTP Adapter is not picking up the value from jca.jndi property.
How to handle this situation.
Thanks
Ajay

Hi,
Since I am working on BPEL 2.0
Following changes solved my problem.
In the invoke activity, I replaced the following xml tag
      <bpelx:inputProperty name="jca.jndi" variable="jndiLocation"/>with following
      <bpelx:toProperties>
        <bpelx:toProperty name="jca.jndi" variable="jndiLocation"/>
      </bpelx:toProperties> And now my invoke activity looks as follow.
    <invoke name="Invoke1"
            partnerLink="FTPFileListAdap" portType="ns3:FileListing_ptt"
            operation="FileListing"
            inputVariable="Invoke1_FileListing_InputVariable"
            outputVariable="Invoke1_FileListing_OutputVariable"
            bpelx:invokeAsDetail="no">
      <bpelx:toProperties>
        <bpelx:toProperty name="jca.ftp.Directory" variable="directoryName"/>
      </bpelx:toProperties>
      <bpelx:toProperties>
        <bpelx:toProperty name="jca.jndi" variable="jndiLocation"/>
      </bpelx:toProperties>
    </invoke>Thanks
Ajay

RFQ Price is not picking in the PO

Hello Expert,
I am creating the PO with reference to PR (ME57) for vendor X. In the PR price is maintained as 2 INR per unit. PO price is 2 INR per unit.
I am creating the RFQ also with reference to PR.
In RFQ, I am maintaining 10 INR per unit for vendor X.
When I edit the PO (adding RFQ number at item level), it is not picking the RFQ price (10 INR), still it is taking the PR price (2 INR).
There is no info record in this case.
Why the system is not picking the RFQ price after entering RFQ number (ME22N)?
Thanks,
Input

Hi,
If you create a PO and reference an RFQ, the RFQ price will be used
If you create a PO and reference a requisition, it will use the
validatition price ONLY if the adopt price flag is set in the
requisition. Please see attached note 393367.
You cannot reference an RFQ and a requisition at the same time.
Kind regards,
Lorraine

Down payment document not picking up the PC , but picking up the segment

Dear Sir/Madam,
We are making one down payment against a Purchase order through T code: F-48 in the vendor line item we are putting the PO reference. It picks up the segment on the basis of PO, but is is not picking up the Profit center in the general ledger view. This does not allow to post the down payment entry.
KIndly advice how the same can be resolved.
Prashant Zinge

Hi,
By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
Kind regards

Schema ID and Category ID is not picked in case routing

Dear Experts,
Currently I am working on SAP CRM 7.0 SP06. Now I am trying to do the settings for case routing based on rule policy.
I have done the following settings for the above requirement.
I have defined application area (as Case Management) in multilevel categorization.
I have created category schema in web ui with application id as case management.
I have created rule modular as if case category is xxx then route to xxx Org unit.
I have maintained this rule policy under service manager profile.
Now the problem is when I hit escalate button schema id and category id is not picking so my rule is getting failed.
Could you please advice if I missed any settings and also please share if you have some document which will explain steps to get the above functionality.
And also please let me know where we assign Reference category ID to a case.
Kindly share your views over the same.
Thank you.
Regards,
Babu.

ok

Condition type not picked in Inquiry but picked up in order

Hi Guys,
We have a problem where a pricing condition type is picked up in order but it is not picked up in quotation/inquiry. So we have the price difference for the material. Points will be awarded.
Can you guys please help?
Thanks
Venky

Hi venky
generally in Inquiry pricing is not at all required.
but in quotation it may require sometimes. but when you create an order with reference to quotation , the price varies, this is because of the pricing type .
check the pricing type in VTAA quotation, the pricing type will be different for sales order and for quotation.
Regards
Srinath

Price not picking from PR

Hi Seniors,
I have maintained a PR with valuation price of 12000 eur. And when i create quantity contract with reference to that PR..it is not picking the valuation price from that PR. it is asking manually ? why it so ??
Regards,
Jana

To copy PR price to PO ,follow the answered link
Re: Price from PR to PO
Adopt PR Price in PO

Regarding pricing not picking from contract while creating service entry

hello,
we are facing a problem -we have created a contract with a service item and made a purchase order with the same reference as well. problem starts while creating service entry sheet while adopting the services its not picking the rate from the contract. please guide us how to proceed further.
thanks,
ritesh

Hi Ritesh,
please check the pricing date in the contract service item and also in the entry sheet header. The price could be probably not found due to different validity of the pricing condition in contract - the price from the contract is not valid on pricing date of   the service entry sheet.
The price in SES is determined on the base of the value in the
field 'Price Reference Date of Entry Sheet' (ESSR-LBLDT). This field
is located on 'Basic data' tab.
However, enhancement SRVESSR (customer exit EXIT_SAPLMLSR_010) can
be used for changing this behaviour.
Regards,
Edit

System is not picking up approvers from BADI in Item level workflow

Hi All,
My problem is that
1. when I creat the shopping cart the system is picking up the correct approver from BADI and showing it in approval preview.
2. My first level approver is a general task so Workitem going to the correct persons.
3. after first level approver I am fillng approver in BADI for 2 nd level.
4. But after first approval the SC is directly getting approved finally as system is not picking up approvers from the BADI.
I dont understand the problem. even We applied SP9 as well, but the problem is not resolved.
Please suggest something.
Thanks
Smita

Hi ,
I am pasting the code of my BADI. Let me know if i need to do some changes.
Regards,
smita
if lv_wf = '4'.
1st approval step executed for indices 1 and 0
      IF actual_approval_index LE 1.
First approval step (General task)
endif.
2. approval step executed for indices 2,1 and 0
      IF actual_approval_index LE 2.
*break-point.
**get the approver for the commodity
         LOOP AT lt_item INTO ls_item WHERE del_ind IS INITIAL.
We consider only items, which are not deleted (del_ind = 'X')
Set the product category
            MOVE ls_item-category_id TO lv_call_value1.
Find the approver of this item based on the customizing table ZCOMMODITY
CALL FUNCTION 'ZWF_COMODITY_ITEM_APPROVAL_GET'
   EXPORTING
     SC_GUID                          = ls_header-guid
     ITEM_GUID                        = ls_item-guid
   APPROVAL_DESCRIPTION             =
    HIDE_ITEMS_NOT_RESPONSIBLE       = 'X'
     CRITERION1                       = 'COMMODITY'
     CATEGORY_ID                      = ls_item-category_id
     ITEM_VALUE                       = ls_item-VALUE
     APPROVAL_INDEX                   = '2'
   CHANGING
     APPROVAL_TABLE                   = approval_table
     ITEM_APPROVAL_TABLE              = item_approval_table
    ITEM_APPROVAL_OBJ                = item_approval_obj
endloop.
*ELSEIF actual_approval_index EQ 2.
don't process 2nd step
         no_further_approval_needed = 'X'.
endif.
endif. " if lv_wf = '4'.
FUNCTION ZWF_COMODITY_ITEM_APPROVAL_GET.
""Local Interface:
*" IMPORTING
*"     VALUE(SC_GUID) TYPE BBP_GUID
*"     VALUE(ITEM_GUID) TYPE BBP_GUID
*"     VALUE(APPROVAL_DESCRIPTION) TYPE BBP_STEP_DESCRIPTION OPTIONAL
*"     VALUE(HIDE_ITEMS_NOT_RESPONSIBLE) TYPE BOOLEAN OPTIONAL
*"     REFERENCE(CRITERION1) TYPE BBP_WFL_APP_CRITERION
*"     VALUE(CATEGORY_ID) TYPE ZBBP_CATEGORY_ID
*"     VALUE(ITEM_VALUE) TYPE BBP_VALUE
*"     VALUE(APPROVAL_INDEX) TYPE SWH_NUMC10
*" CHANGING
*"     REFERENCE(APPROVAL_TABLE) TYPE BBPT_WFL_APPROVAL_TABLE_BADI
*"     REFERENCE(ITEM_APPROVAL_TABLE) TYPE BBPT_WFL_ITEM_APPROVAL_BADI
*"     REFERENCE(ITEM_APPROVAL_OBJ) TYPE BBPT_WFL_ITEM_APPROVAL_OBJ
*"       OPTIONAL
this Function Module is for getting the commodity approvers
for the commodity items, in the Shopping cart
DATA:
    ls_approval_table      TYPE bbp_wfl_approval_table_badi,
    ls_item_approval_table TYPE bbps_wfl_item_approval,
    ls_approval_def        TYPE bbpt_wfl_lia_def,
    ls_item_approval_obj   TYPE BBPS_WFL_ITEM_APPROVAL_OBJ.
DATA:
    lv_app_obj_guid   TYPE bbp_guid_32,
    lv_is_new_approval_object TYPE boolean.
**structure for commodity data
data : ls_commodity type zcommodity.
data : lv_value1 type BBP_WFL_APP_PROPERTY.
CONSTANTS:
      c_agent_is_user TYPE otype VALUE 'US'.
First find the right approval object the item belongs to.
All items of an approval object are approved togheter in
this approval step, and therefore only one workitem is
created for this items. IF possible use this standard function
BBP_WFL_DIN_APP_OBJ_GET for creating the approval object.
lv_value1 = category_id.
CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
EXPORTING
    SC_GUID                      = sc_guid
    CRITERION1                   = criterion1
CRITERION2                   = ''
CRITERION3                   = ''
   VALUE1                       = lv_value1
VALUE2                       = ''
VALUE3                       = ''
IMPORTING
   APPROVAL_OBJ_GUID            = lv_app_obj_guid
IS_NEW_APPROVAL_OBJECT       =
TABLES
    ITEM_APP_OBJ                 = item_approval_obj
              CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
                EXPORTING
                  SC_GUID                      = sc_guid
                  CRITERION1                   = criterion1
                 CRITERION2                   = ''
                 CRITERION3                   = ''
                 VALUE1                       = lv_value1
                 VALUE2                       = ''
                 VALUE3                       = ''
                 IV_ITEM_VALUE                = ITEM_VALUE
               IMPORTING
                 APPROVAL_OBJ_GUID            = lv_app_obj_guid
                 IS_NEW_APPROVAL_OBJECT       =
                TABLES
                  ITEM_APP_OBJ                 = item_approval_obj.
CALL FUNCTION 'BBP_WFL_DIN_APP_OBJ_GET'
   EXPORTING
     sc_guid                 = sc_guid
     criterion1              = criterion1
CRITERION2              = ''
CRITERION3              = ''
     value1                  = category_id
VALUE2                  = ''
VALUE3                  = ''
IMPORTING
If 2 items of the same shopping cart have the same
values for the criterias, this function returns the
same (!!!) approval object guid
    approval_obj_guid       = lv_app_obj_guid
   TABLES
This table saves the criterias for which the approval object
was created. For example:
|approval object1| "cost center" | 1000   |
|approval object2| "cost center" | 1200   |
|approval object3| "prod categ " | office |
    item_app_obj            = item_approval_obj
Check if this approval object already exists in the approval
table
READ TABLE approval_table INTO ls_approval_table
          WITH KEY approval_object_guid = lv_app_obj_guid
                   approval_index       = approval_index.
IF sy-subrc EQ 4.
    lv_is_new_approval_object = 'X'.
ENDIF.
IF lv_is_new_approval_object = 'X'.
Now read your own approval table based on your criteria's
**now check whether the category id is a commodity material and
*find the responsible person for that and
*check if the amount of item is falling in the approval limit of the comodity manager
select single * from zcommodity into ls_commodity
where CATEGORY_ID = category_id
and ( ZFROMAMT <= item_value and ZTOAMT >= item_value ).
   SELECT * FROM bbpt_wfl_lia_def
            INTO CORRESPONDING FIELDS OF ls_approval_def
            WHERE
                  app_crit_name1 = criterion1 AND
                  app_crit_value1 = value1
   ENDSELECT.
    IF sy-subrc NE 4.
Fill approval table (who is responsible for which approval
object in which approval step)
      ls_approval_table-approval_index       = approval_index.
     CONCATENATE c_agent_is_user ls_approval_def-approval_agent1
                             INTO ls_approval_table-approval_agent.
CONCATENATE c_agent_is_user ls_commodity-person
                              INTO ls_approval_table-approval_agent.
      ls_approval_table-name = ls_commodity-name.
      ls_approval_table-approval_description = approval_description.
      ls_approval_table-approval_object_guid = lv_app_obj_guid.
      ls_approval_table-hide_items_not_responsible =
                              hide_items_not_responsible.
      APPEND ls_approval_table TO approval_table.
     IF ls_approval_def-approval_agent2 IS NOT INITIAL.
Second approver for the same workitem exists
       CONCATENATE c_agent_is_user ls_approval_def-approval_agent2
                           INTO ls_approval_table-approval_agent.
       ls_approval_table-name = ls_approval_def-agent_string2.
       APPEND ls_approval_table TO approval_table.
     ENDIF.
    ENDIF.
ENDIF.
Fill item table (Which items belongs to which approval object)
ls_item_approval_table-approval_object_guid = lv_app_obj_guid.
ls_item_approval_table-approval_item_guid   = item_guid.
APPEND ls_item_approval_table TO item_approval_table.
**Fill Item approval object
ls_item_approval_obj-sc_guid = sc_guid.
ls_item_approval_obj-APP_CRIT_NAME1 = CRITERION1.
ls_item_approval_obj-APP_CRIT_VALUE1 = CATEGORY_ID.
ls_item_approval_obj-APPROVAL_OBJECT_GUID = lv_app_obj_guid.
append ls_item_approval_obj to ITEM_APPROVAL_OBJ.

Rerence key is not picking up in ZFBL5N

Hello SAP Expert !!
I got one issue,in ZFBL5N report reference key is not picking for few plants,kindly suggest me asap as this is very urgent issue.
Thanks in advance !!!

Hi Prateek,
Please check the following threads and see whether you get any useful info.
Reference Key in dynamic selection in FBL5N
How to change ref. key 2 in FBL5n through Mass change?
XREF1(Reference Key1) and XREF2(Reference Key2) in FBl5N report
FBL5N t code and BSEG table is showing wrong contract number
Warm regards,
Murukan Arunachalam

Not picking po unit automatically

Hi All,
When I am created the PR for STO the "PO Unit" in the Source of supply tab is not picking automatically, while It's mentained in the Material Master in Purchasing View.
Here my base unit of measure and Order unit is different.

Hi,
It should pick Order unit from material master.
Or just cross check with a test by having a Function Authorization in OMET and select with check box Ref to Purchase Requisition in Possible Reference Objects Segment
Regards,
Biju K

Job executing the SSIS pkg via cmdExec line step not picking the config details

Job executing the SSIS pkg via cmdExec line step not picking the config details (of prod server connections/parameters)
specified in dtsConfig file and by default using the values present in the pkg (which is of dev env). I have to open the package
uncheck "Enable package configuration" save the package and check it again and save again then the package will use the prod config.
What could be the reason? and how to fix this?
The SSIS pkg and the dtsCofig reside in same folder of network drive.
SQL Server R2 Ent Ed
Thanks

Hi Ramzi24,
This is the by design behavior. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command lines or other package configurations configured in the job step. In this way, as long
as the default package configurations file is valid, the configurations of it cannot be overwritten.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations or
modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Reference:
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
Regards,
Mike Yin
TechNet Community Support

Reference no not picks

Similar Messages

Maybe you are looking for