Reference Object Screen For Vehicle in Maintenance Order

SAP Gurus,
How could I display the reference object screen for vehicle specific data (O150) in my Maintenance Order. I have been able to display it in Maintenance Notification but how could the fields plate number etc defined in reference object screen for Fleet objects be displayed in Order.
Regards,
Muhammad Usman Kahoot

Muhammad Usman Kahoot,
  When you create the Order from the notification, there shouldn't be a problem with the reference object screen, you should be able to see the Fleet object reference field, even if the screen reference object type for the order type is set to blank in config.
If you are creating a order directly using transaction IW31,Make sure to assign the Equipment only reference object screen (0150) to the order type using transaction OIOA.This will bring in the fleet reference object field defined as well.
Regards
Narasimhan

Similar Messages

  • Recording for vehicles in maintenance order

    Hi
    how can i enter  in maintenancne order  counter-reading recording for vehicles like primary counter for miles  using screen O150
    i am getting  License plante  using " Scenario: O150  Field name: LICENSE_NUM though SPRO setting "
    but not able to get the primary counter and its last reading in maint. order
    Thanks
    Ajay khurana

    Dear Ajay
    You requirement is to enter the mesuring counter reading against Vehicle (Fleet object) through maintenance order right??
    You can enter the the measuring counter reading against the vehicle through maintenance order at two points.
    1. At the time of order confirmation using iw41/IW42 transaction.
    2. At the time of TECO using IW32 transaction. When we try to TECO the order the small screen is coming. on this screen measurement document button is there. click on it. Then you will be on enter measurement document screen. Just enter there the counter reading which will get updated against the Vehicle.
    I hope this will satisfy your requirement.
    Regards
    Makarand Gurjar

  • Reference Object Screens in QM notification

    Hi All,
    There are many fields in Reference object screen, but how do i see the fields while creating a QM notification. I see the standard screens 0520, 0500, etc.. and initial screens.
    How can i have these fields show up in the Notification header?
    Thanks
    Jithin

    We can execute action box to execute follow-up function. With a follow-up function, the system executes the corresponding function module as soon as we execute the follow-up function in the action box.
    With action box if you want to move stock to quality for inspection then you need to assign inspection type in material master. Once system will transfer stock in QI then it will create inspection lot for testing. If you don't want to create inspection lot then no need to assign inspection type.
    For more information please refer following SAP help link.
    [SAP Help1|http://help.sap.com/saphelp_erp60_sp/helpdata/en/dc/edbd3c793511d295d000a0c930e04c/content.htm]
    [SAP help2|http://help.sap.com/saphelp_erp60_sp/helpdata/en/6a/9927b6e8ad11d1954800a0c930e04c/content.htm]
    I hope it would help you.
    Thanks!!!

  • 4.6C method for creating a Maintenance Order

    Hi,
    We have a requirement to create and update maintenance orders on a 4.6C system.  The scenario is that we need to programmatically mimic what users can do in IW31 and IW32.  The BAPI_ALM_ORDER_MAINTAIN function module is not available on this system (SAP delivered that BAPI in a later version.)  We've looked at IBIP but it does not offer structures for order data.  Using "call transaction" and BDC data structures directly seems to be an option but difficult to implement and prone to error.
    What other options exist for creating/updating maintenance orders on a 4.6C system?  Thanks in advance for any information or examples you can provide.
    -Jason

    Ok.  I've actually figured out how this works.
    I'll post what I've found out in case it helps anyone else.
    The parameters seem to be: ( with my example data in brackets)
    I_AUFNR – order number
    I_VAPLZ – work center ( MAINT.)
    I_VAWRK – plant ( 0001)
    I_PLNTY – Task list type = ( A )
    I_PLNNR – Task list group ( 55)
    I_PLNAL – Task list group counter ( 1)
    The problem I have is that this bapi is not released, and it is not remote enabled. 
    Are there any released BAPIs that would do the same thing?
    Or would I need to write my own remote-enabled BAPI that calls this one, and then try to call my BAPI ( using .NET Connector ) ?
    Thanks,
    Derek

  • SPL Screening for Vehicle Masters

    Hi Guys
    Is there a standard process where we can do SPL screening for Vehicle masters in TD also, as it looks like we can do for a nomination in TSW, but if the vehicle is blacklisted the nomination SPL will not pick it up.
    Is there a facility is GTS to do this?
    Thanks
    Carl

    Hello Abhiram,
    is your customizing SAP Global Trade Services --> SAP Compliance Management --> "Sanctioned Party List Screening" Service --> Activate Business Partner at Business Partner Function Level
    Type SLLBNK set for asynchronous?
    Do you have entries in /SAPSLL/SPLAUD table entries for BPTYPE 09 partne bank? What status do they have? Do you have them all under A1 scenario?
    Cheers,
    Gabriel.

  • Colective Settlement and "CLSD"Status for Production and Maintenance Orders

    Hi dear experts,
    Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
    The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
    We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
    Thanks in advance,
    Lígia Moreira

    Hi,
    You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
    Regards,
    Eli

  • Need help on to set User status for Operations in Maintenance order

    Hi experts,
    i am new to PM module.
    i need to do BDC for IW31. i want to know some inforamtion
    on user status for each opertaion.
    my problem is ,, what is user status.
    why it is saying order is not yet released when saving and status can not set.
    in this cases how can i do BDC.

    User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
    May be in your system user status are configured to set only  after the release of the order.
    For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
    http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

  • Tables for tracing the Maintenance Order Operation to Purchase requistion

    Hi Everyone,
    Can any one suggest appropriate table for finding the link for tracing Maintenance Order Operation to Purchase Requistion for Service Items.
    My requirement if I give the Order Number, I require Operations in it & PR Item associated if they are Service Items.
    Regards,
    MLN Prasad

    Hi got the Answer myself & thanks fro the answers given by you all.
    The exact way how I got is Pass AUFNR to AFKO and get AUFPL.
    Use this AUFPL in AFVC where we get VORNR (operation Number) also.
    You can use the AUFPL in EBKN ande can get tje PR (BANFN).
    Bye,
    MLN Prasad

  • Tables for Materials in Maintenance Order

    Hi experts,
    I need to implement a program that let me view the materials contained in the maintenance order, but I can not find the tables that contain this information.
    Can anyone help me or tell me how to get this information (Function or other)?
    Thanks in advance
    L.

    Hi,
        Check in RESB- Reservation table..,enter order no 
       Alternatively for Purchase requisition generated from Maintenance Order - u can find EBKN Table ..
    Check if IWBK Report - satisfies your requirement or no
    regrds
    pushpa

  • Set Deletion Flag for the Preventive Maintenance Order

    Hi,
    I need to set the Deletion flag for the Service Order. Deletion flag available in the screen disabled. Please suggest.
    also I need know under which I shall be able to set such deletions.
    Thank you,
    Vijaya

    Hi Vijaya,
    Pls refer the help.sap.com related to deletion flag for PM/CS Orders. Some of the check criteria mentioned below for your reference.
    Before a deletion flag is set, the following requirements must be met:
    u2022 Any manually added purchase requisitions or purchase orders for the order must be deleted first.
    The balance of the actual costs for the order must be zero. This means that the deletion flag can only be activated if the order has already been settled, or if no actual costs were incurred for the order.
    u2022 Commitments relating to the order must be deleted.
    u2022 Unprocessed and incorrect goods movements must be processed.
    When the deletion flag is activated, all remaining capacity requirements are deleted. A deletion indicator is also set in any open material reservations.
    An order that has been flagged for deletion cannot be changed. However, you can cancel the deletion flag.
    Thanks
    Siva
    Edited by: sivakumar kasi on Sep 3, 2009 12:09 PM
    Pls set the Order as Techically completed (TECO) and check the deletion flag set.
    Thanks
    Siva

  • IMG Setting for Fleet Management - Set Reference Object for Vehicles

    On other SAP 4.7 systems I have been able to access in the IMG "Set Reference Object Screen for Vehicles" under the "Settings for Fleet Management".  I am currently working in a system that doesn't have that option in the IMG.  What do I have to do to get this menu in the IMG?

    Hi,
    All the extra features provided by business functions in PLM are documented in note [1389108|https://service.sap.com/sap/support/notes/1389108]. See the pdf attachment in that note.
    -Paul

  • Maintenance history for Routine Maintenance Orders

    Hi I want to know where the work order history to be entered for the Functional Location for future reference and analysis for a routine maintenance order. Normally for routine maintenance we dont raise notification and directly order is created from the maintenance plan/item. Please reply.

    Depends on how you plan to use that history. If you need to do data analysis of this history then may be you should use the notification by creating it. If it is just to record info then I feel that entering the explanation in the long text during time confirmation or in the order header etc.. should be good. I feel the first option is good. Try it. If u find it too cumbersome then shift over to the second. Right now I can only think of these two.
    thanks
    Bala

  • Order Types - screen reference object

    Dear PM guys,
    In Functions and Settings for Order types-In Configure Order type screen,If I give O120(Functional location(30)equipmentassbly) or O180(Functional loc. 1:1 + equip. + assembly) for the field Screen RefObject, Its makes no difference in flow.Then what is the significance of that field.
    Regards
    ISWARI

    When you assign the  120 then the reference object Screen changes in the order and the Functional Location field is 30 Characters Long

  • Option 'Maintenance Order' missing in 'Allowed Object Types' tab in IMG of User status Profiles

    Dear All
    I have created a User Profile using T-Code OIBS.
    Now I want to assign that User Profile to Maintenance Order. But in the 'Allowed Object Types' tab, the option "Maintenance Order" is missing due to which I am unable to assign it to Maintenance Order.
    Could anyone tell how to add the option "Maintenance Order" in 'Object Types'.
    Thanks in advance.
    BK

    Hi Peter
    Thanks for your help.
    I just found that in t-code BS13, the object categories ORI and ORH exist but 'No Status Profile' check is marked against them. That is the reason why the system is not showing the 'Maintenance Order' as an option in Allowed Object Types.
    Thanks a lot !
    Best Regards,
    BK

  • Reference object data update in Location tab page of order

    Hello
    When a  reference object in notification/order is changed, the location and account assignment data is  updated in order location data by standard settings in SAP but any changes to the master data of the existing reference object is not changed in Notification/Order location tab page.
    But there is an option that  when you change the data in the technical object and you need the same to be reflected in order location data for which this order has the reference object, we can use the functionality of clicking the right mouse in object list and so the data will be updated in notification/order.
    Please explain how to carry out this step "of clicking the right mouse in object list and so the data will be updated in notification/order"..
    I have changed the Location data/Account assignment data of techincal object in its master data and now i want that to reflect in Work order.
    How to achieve this??

    Hi,
    Keep the cursor in Equipment field & right click the mouse. You can find the option Update Reference Object Data.
    Select that option, you will get updated details in the Notification / order.
    Regards,
    Maheswaran.

Maybe you are looking for

  • How to set the Context path to AAA/BBB in Weblogic 5.1?

    Hi folks,           I want to deploy a web application and set the servlet context as:           AAA/BBB. Put more simply, my application should be accessible via the           following:           http:localhost:7001/AAA/BBB/main.jsp           where

  • Illustrator CS4 saving vector art for Microsoft Word

    I have a logo created in Illustrator CS4. I saved the file for use in Microsoft Office using the "save for Office", exporting as a .wmf, and even saving the vector art in Photoshop as a .png. I can get a variety of formats to work well in Word docume

  • MSI-PRO-E Motherboard and OCZ3G1600LV6GK

    I have been doing some research and am deeply confused. I am going to be buying a MSI Pro-E motherboard and am planning on buying OCZ Gold Ram (3 x 2GB). I was looking at the timings and am getting confused. Some people are saying you have to mess wi

  • I want to gift a play list

    can I gift a play list to a friend

  • XML Encoding error

    Hi,