Reference Object Screens in QM notification

Hi All,
There are many fields in Reference object screen, but how do i see the fields while creating a QM notification. I see the standard screens 0520, 0500, etc.. and initial screens.
How can i have these fields show up in the Notification header?
Thanks
Jithin

We can execute action box to execute follow-up function. With a follow-up function, the system executes the corresponding function module as soon as we execute the follow-up function in the action box.
With action box if you want to move stock to quality for inspection then you need to assign inspection type in material master. Once system will transfer stock in QI then it will create inspection lot for testing. If you don't want to create inspection lot then no need to assign inspection type.
For more information please refer following SAP help link.
[SAP Help1|http://help.sap.com/saphelp_erp60_sp/helpdata/en/dc/edbd3c793511d295d000a0c930e04c/content.htm]
[SAP help2|http://help.sap.com/saphelp_erp60_sp/helpdata/en/6a/9927b6e8ad11d1954800a0c930e04c/content.htm]
I hope it would help you.
Thanks!!!

Similar Messages

Reference Object Screen For Vehicle in Maintenance Order

SAP Gurus,
How could I display the reference object screen for vehicle specific data (O150) in my Maintenance Order. I have been able to display it in Maintenance Notification but how could the fields plate number etc defined in reference object screen for Fleet objects be displayed in Order.
Regards,
Muhammad Usman Kahoot

Muhammad Usman Kahoot,
When you create the Order from the notification, there shouldn't be a problem with the reference object screen, you should be able to see the Fleet object reference field, even if the screen reference object type for the order type is set to blank in config.
If you are creating a order directly using transaction IW31,Make sure to assign the Equipment only reference object screen (0150) to the order type using transaction OIOA.This will bring in the fleet reference object field defined as well.
Regards
Narasimhan

Inserting Object link as reference object in Maint Order/Notification

Dear all,
I've mapped pipe line using obejct link,now when i create Maint Order or Notification system displays below mentioned message,
Select a link object as reference object
Message no. IH101
Diagnosis
You are trying to create an order or a notification for a link object, but have not yet selected an object.
Procedure
Place the cursor on a link object. This object will be entered in the notification or order as the object referred to.
In std Screen RefObject thers is no ref object for Link,
Please guide me how we can create Maint.Order/Notification against Object Link,as it is required to track cost as well as history of repairs in pipe line.
Thanks in advance
Regards
Parshil
Edited by: PM_in_SAP on Jul 27, 2010 9:19 AM

Hi,
i refer page no 18 of SAP book Object Networking (CS-BD/PM-EQM-ON) SAP AG Release 4.6C,
To select a particular link from the list, (IN18)select the object link and choose one of the following options:
Goto --> Change/Display --> link, You reach the object link data screen.
Goto -->Create notification --> Notification type
You reach the screen where you can create a maintenance notification for the link. If a link object is entered for the selected link, the system automatically uses it as a reference object for the notification.
Goto --> Create order
You reach the screen where you can create a maintenance order for the link. If a link the system automatically uses it as a
reference object for the order.
Regards
Parshil
Edited by: PM_in_SAP on Jul 27, 2010 11:22 AM

How to get subject text and Reference Object both Screens at the Header lev

Dear Experts ,
                I am getting only Notification Header Screen ( Subject Text, Notification system and User Status) at the Header of Notification and different Tabs under that screen.
                I want Subject Text and Reference Object screens at header Level so that any screen Tab selected at a time I can see the Subject and Reference Object of the Notification.
                Pls tell me is there any way so I can Include 2 screens( Subject and Reference Object at the Header Level.)
With best regards,
Narendra

Narendra,
You can't in the standard system.
Only the tabs are configurable.
PeteA

Notification: Free Reference Object (BADI)

Hi All,
When we define Screen areas in Notification Header for any notification type, in Screen Type Object drop down there option O550 Object: Free Reference Object (BADI).
Can anyone tell:
1. What is the meaning of it
2. Does this changes the options in Screen Structure in Extended View (while defining the screen areas)
3. 'Free reference means, can we define our own fields in this
Your answer will be really helpful.

I suppose you can use this screen type object to define your own subscreen for the notification header (the three lines above the tabstrip). I played around with it a little, but I didn't do the complete implementation. There is a BADI "QM00_SUBSCR_5000". When you implement that BADI you can specify a custom program and dynpro for the screen header. Also, you will have to implement the methods to transport the notification data between your custom subscreen and the calling program.
This is the documentation of the BADI "QM00_SUBSCR_5000":
You can use this BAdI to implement the user-defined reference object screen according to your requirements. This implementation is dependent on the notification type.
To perform this implementation, you must first have selected the value 0550 (object: user-defined reference object) in the "Object" screen type in Customizing for the notification type. You do this when maintaining the screen areas for the notification header.
This Business Add-In allows you to display and maintain data related to notifications (VIQMEL).
The following notification data is available in the subscreen that is called in the Business Add-In implementation:
VIQMEL Notification header
TQ80 Notification type
MODUS Processing mode ( H = Add, V = Change, A = Display)
You can return the complete VIQMEL (with changes) to the calling program.
An active implementation of the Business Add-In already exists in the PLM Addon for the notification types QS (stability study with material reference and QR (stability study without material reference), which are delivered with the standard Customizing.
Use this active implementation as a template for your customer-specific implementations.
If you do not use the PLM Addon package, and want to implement this Business Add-In, use the delivered sample coding for the implementation of the methods as a template.

Order Types - screen reference object

Dear PM guys,
In Functions and Settings for Order types-In Configure Order type screen,If I give O120(Functional location(30)equipmentassbly) or O180(Functional loc. 1:1 + equip. + assembly) for the field Screen RefObject, Its makes no difference in flow.Then what is the significance of that field.
Regards
ISWARI

When you assign the 120 then the reference object Screen changes in the order and the Functional Location field is 30 Characters Long

IMG Setting for Fleet Management - Set Reference Object for Vehicles

On other SAP 4.7 systems I have been able to access in the IMG "Set Reference Object Screen for Vehicles" under the "Settings for Fleet Management". I am currently working in a system that doesn't have that option in the IMG. What do I have to do to get this menu in the IMG?

Hi,
All the extra features provided by business functions in PLM are documented in note [1389108|https://service.sap.com/sap/support/notes/1389108]. See the pdf attachment in that note.
-Paul

Quality notification - more reference objects

Hello,
business need is to have quality notification with possibility to refer either production order or purchase order under one notification type.
By standard this seems not possible as:
Complaint Against Vendor references to Purchase order
Internal Problem Report references to Production order.
But in section "User-specific notification" is mentioned
A user-specific notification type has the same basic structure as the standard, predefined notification types. The screen layouts, reference objects, and tab indexes, however, may differ from those in the predefined notification types, depending on how you customize the user-specific notification type.
But I have not found a way in customizing to enable this.
Advice appreciated.
Br, Jan

Thanks for the asnwer, but I think this does not solve my problem.
In the configuaration for "Notification Header and Screen Areas" I do have
- notification header screen H500
- customized screen O550 (BADI)
and both are needed.
The BADI is used to customize refernce object screen, not reference documents screen. But my idea was to change reference document screen area in a way, that both purhcasing and production reference documents are visible in there.
I only managed to get the vendor screen by adding screen area 037 to "Extended View: Tabstrips and Screen Areas" But adding purhcase document as reference to Reference documents remains my problem.
I am kind of able to make the vendor screen visible by e.g. adding screen area 037 Partner overview screen (table control).But creating a new pop-up window for notification reference, where both options (pur ord, prod ord) would be available with copying functionality - in my opinion this requiers completely custom coding.

Notification - reference object/reference documents

hi all,
When I create a new notification number for a given notification type in our system, there is a subscreen for reference object (such as material number) and reference document (such as production order number)
Is it possible to have a notification created for more than one material number or more than one production order?
Does this have to be with ABAP defining new screens?
Thanks,
neo

Hi Neo,
there's a new feature since EHP 5.
Check this:
Assigned Objects - Quality Notifications (QM-QN) - SAP Library
This is the only way I know to assign more than one object to a notification (without ABAP),
Chris

F2 Notification type not picking reference object tab data

Hello experts,
I am facing a problem while creating notification. I have one lot of 01 inspection type(which is created after GRN) to which F2 notification type is attached. When i am trying to create notification against that lot, system is not fetching data in Reference Object Tab i.e. Material number, Plant, Material Doc, etc,.
Please give me some solution on this.

Dear all,
i am adding screen shots of process which i am doing. Please have a look on it.
1. I have done result recording in which i have rejected one parameter and closed RR. As i have not activated automatic defect recording it will allow me to save RR. Now i clicked on Defect recording.
2. Selected report type 00000010 & defect recording at Inspection Lot Level.
3. Added defect & clicked on Notification.
4. Here no data is fetched.

Reference object in Notification and Order

Hi ,
I have a requirement to capture following in the reference Object for notification and Order
1. Functional Location
2. Equipment
3. Material
4. Serial Number
Configuration setting for overview of notification type doesn't have the option to capture all the above fields.
I am able to get all fields except Functional Location...
Please guide me
Regards
Anil Kumar

Anil,
I have just been looking at this same requirement.
Unfortunately you can only use the standard options for reference objects which does not allow for your requirement.
There are no user-exits/BADIs either, you would need to build a new screen and screen-logic which is a system modification.
The best I could do within the standard system is to include these fields on the Enhancement tab (user-exit IWO10018) or build a bespoke front-end via ABAP or HTML. GUIXT is another option.
PeteA

Notification: Set priority and dates, based on the reference object

Hello,
I'm searching for an idea/solution, to set the priority of a notification automatically, depending on the entered reference object (F/L or equi).
I.e. I want to classify the F/Ls and equis with a priority (e.g. via the classification, or F/L / equi master data). When the user creates a notification, and enters a F/L or equi, the priority should be selected from the object and set automatically.
Thanks for your answers!
Best regards
Stephan

Hello Pete,
thank you for your answer. Unfortunatelly both user-exits seem not to work for my problem.
QQMA0025: Default values when adding a notification
Priority and dates can be modified, but in this step you don't have the functional location. I thought, I can send a popup in this user-exit, to ask for the functional location, but the functional location is deleted in a later step (before the 1st display of the notification header), i.e. the user has to enter it again.
QQMA0018: Deadline setting based on entered priority
Here you can only modify the dates / times, but not the priority.
Another show stopper is, that the exits will only be processed once, i.e. in both cases, a change of the functional location doesn't adjust the dates/times.
It seems, that exit "Before saving the notification" (as far as I remember QQMA0014) could be a solution.
I see 2 problems ->
1. the user enters the F/L or equi and nothing happens to the priority / dates -> sending a popup in the saving process to inform the user about the changes, could be a solution.
2. What to do, when the user has already maintained priority and/or dates/times?
I will have a look, if there are enhancement spots in the notification program. Perhaps this can help me (or better - my boss ).
Best regards
Stephan

Notifications: display "assigned objects" screen on item level

Dear SAP-friends,
I´ve just found the (quite) new BaDi to assign several objects (batch, lot etc) to notification (ERP 6.0 EHP 4).
What I successful did was: (1) activation of Badi, (2) assignment of object types to my notification type, (3) placing the screen area 840 onto notification header tabstrip.
The screen 840 (= dynpro SAPLIQS0 / 8410) shows now all assigned objects to item 1 (the first one).
In other words: If I assign any object it will be assigned to item 1 automatically.
OK, now the question: how to assign any object to other items? I did not find any possibility to place any screen on item level.
Is there any chance to do this?
Regards
Michael

Dear Michael,
You should first go to items tab and select the line of the item you want to assign any object and then go to the tab with assigned objects, you will see that the item number changes.
Hope this will help
Gurkan

Reference object in Notification

Dear All,
I am new person in the SAP-PM module but I need to work on it. I have a quarry, what is reference object and reference object key in notification creation, in which table I need to see the values of the same.
Thanks and regards,
Krish....

Hi
Notification we create with reference to some object.
whch means it is refering some functional location , equipment etc.
So it is address some object against wihc notification is creating.
check table QMFE
regards
Krishna

Object List Tab in Notification

Hi,
I am looking for option to add multiple equipments in one notification , I checked in SPRO setting in Notification creation >>Screen structure for extend view and added one new tab as OBJECT LIST and in SCREEN AREA , it allows me to enter 05 refernce object.
But in my requiremnt I am looking for something like Order header Tab (Object list ) so i can add multiple refernce object.
Any option in setting or finally i need to take my technical team (Abaper's) Help.
Please post you comments.
Riyaj

Riyaj,
It is not possible to have a OBJECTS tab in the notification in standard SAP
PeteA

Reference Object Screens in QM notification

Similar Messages

Maybe you are looking for