Reference objects within a specific instance of a subform
Hello,
How can I refer to a specific instance of a subform using variables
As an example, say if I want to excute the statement,
if (subform1[someVar].table1.row1.texfield1.rawValue=="test")
else { ... }
The resulting console message is:
"section[someVar] has no properties"
Even if I try the following,
if (subform1[2].table1.row1.texfield1.rawValue=="test")
The console message becomes "section[2] has no properties"
I am certain that the property exist...
What should I do in this case?
Thanks,
Dan
Phrase Express does not work when Victors (our current project) is opened up with a Firefox Browser.
Phrase Express is a tool that will allow a pre-typed clause to be populated onto the title (or tax) typing form. When Victors is opened in IE, the tool works perfectly. If Victors is opened in Firefox (either 2.0 or 3.0), the typing form loses focus when Phrase Express is accessed, and so the clause does not know where to go. If you use a hot key from Phrase Express (such as Ctrl-Shift-O for the degree symbol), Phrase Express does not lose focus, and can be used.
We also loaded at different websites and saw that Phrase Express will lose focus in them when using a Firefox browser as well.
Similar Messages
-
Reference object/element on an instance
Is it possible to control an object/element on a instance? If so, how is it done through actionscript? There is an instance "instance140" off of the root, that has an element named img4 that i need to reference... does anyone know how I would go about that?
using root.instance.object form returns undefined. Please help.you can use the following (but you should type your object correctly):
var yourobject:* = MovieClip(root).instance140.getChildByName("img4"); -
ActiveX Object references - casting to a specific instance
I have some ActiveX controls that are used to interface between a vendors hardware. The activex controls are quite heavy weight in that at any one time there should only be one instance of each of the type of controls within the program.
What I want to do is keep the activex controls in the top level vi and pass references to sub-vi's in order to do property changes or method calls on the activex objects.
When I create an activex reference control in a sub vi it doesnt seem to know what methods/propertys are available on that reference. I beleive it needs casting/converting to a reference that will allow LabView to recognize the reference type but im not sure how to do this.
Thanks
TMCYour automation refnums are probably not linked to the ActiveX control. Try this... select a property node in your main VI's diagram that has the desired ActiveX control attributes displayed and then select Edit>>Create SubVI from the menu. The automation refnum in the subVI will be linked to the ActiveX control and will work the way you want it to. Copy this to your other subVIs and the property nodes will start behaving. The other way to link the automation refnums is to right-click on them and choose select ActiveX class and then browse to your control.
-Jim -
Object Reference Not Set To An Instance Of An Object - Outlook Add-In - Add-In Express
Hi,
My Add-In has been developed in VS2010 using the Add-In Express pack.
Its a very simple add-in that shows an IT support ticket email detailing PC information. To use it, following installing the add-in, the user must select the tab in outlook and click on the Send IT Support Email button which will generate an Outlook Email
Template with specific information about the PC that I pull using VB.
It works fine in Windows 7 & 8, but throws an 'Object Reference Not Set To An Instance Of An Object' exception in Windows XP. Screenshot is shown below:
The code is below
Imports System.Runtime.InteropServices
Imports System.ComponentModel
Imports System.Drawing
Imports System.Windows.Forms
Imports AddinExpress.MSO
Imports System.Object
Imports System.Net
Imports System.Environment
Imports System.Net.NetworkInformation
Imports System.Windows.Forms.Application
Imports Microsoft.Office.Interop.Outlook
Imports outlook = Microsoft.Office.Interop.Outlook
'Add-in Express Add-in Module
<GuidAttribute("735B7BC8-DD2F-44D8-BC37-30D86769C065"), ProgIdAttribute("$safeprojectname$.AddinModule")> _
Public Class AddinModule
Inherits AddinExpress.MSO.ADXAddinModule
#Region " Add-in Express automatic code "
'Required by Add-in Express - do not modify
'the methods within this region
Public Overrides Function GetContainer() As System.ComponentModel.IContainer
If components Is Nothing Then
components = New System.ComponentModel.Container
End If
GetContainer = components
End Function
<ComRegisterFunctionAttribute()> _
Public Shared Sub AddinRegister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXRegister(t)
End Sub
<ComUnregisterFunctionAttribute()> _
Public Shared Sub AddinUnregister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXUnregister(t)
End Sub
Public Overrides Sub UninstallControls()
MyBase.UninstallControls()
End Sub
#End Region
Public Shared Shadows ReadOnly Property CurrentInstance() As AddinModule
Get
Return CType(AddinExpress.MSO.ADXAddinModule.CurrentInstance, AddinModule)
End Get
End Property
Private Sub AddInModule_AddInInitiatize(ByVal sender As Object, ByVal e As EventArgs) _
Handles MyBase.AddinInitialize
'Outlook 2010 = 14
If Me.HostMajorVersion >= 14 Then
AdxOlExplorerCommandBar1.UseForRibbon = False
End If
End Sub
Public ReadOnly Property OutlookApp() As Outlook._Application
Get
Return CType(HostApplication, Outlook._Application)
End Get
End Property
'Gets the MAC Address from the NIC Information
Function getMacAddress()
Dim nics() As NetworkInterface = _
NetworkInterface.GetAllNetworkInterfaces
Return nics(0).GetPhysicalAddress.ToString
End Function
Sub CreateTemplate()
Dim sHostName As String
Dim sDomain As String
Dim sUserName As String
Dim sOS As String
Dim s64 As String
Dim sMAC As String
Dim host As String = System.Net.Dns.GetHostName()
Dim LocalHostaddress As String = System.Net.Dns.GetHostEntry(host).AddressList(1).ToString()
Dim MyItem As Outlook.MailItem
'Finds the PC Number
sHostName = Environ$("computername")
'Finds the Domain
sDomain = Environ$("userdomain")
'Finds the Username logged into the PC
sUserName = (Environment.UserDomainName & "\" & Environment.UserName)
'Finds the Operating System
sOS = (My.Computer.Info.OSFullName)
'Shows the results collected from the getMacAddress Function in the sMac variable
sMAC = getMacAddress()
'Finds the Architecture of the Operating System - x86 or x64
If (Environment.Is64BitOperatingSystem) Then
s64 = ("64bit")
Else
s64 = ("32bit")
End If
'Creates a Template Email
MyItem = OutlookApp.CreateItem(Outlook.OlItemType.olMailItem)
'Configures the Sender as [email protected]
MyItem.To = "[email protected]"
'Shows the template
MyItem.Display()
'Shows all of the string in the Email Body
MyItem.HTMLBody = String.Concat("<b><u>IT SUPPORT TICKET</u></b>", "<br/><br/>", "<tr><b>PC Number: </b></tr>", sDomain, "\", sHostName, "<b></b>", "<br/><br/>", "<b>Username: </b>", sUserName, "<b></b>", "<br/><br/>", "<b>OS Version: </b>", sOS, s64, "<b></b>", "<br/><br/>", "<b>IP Address: </b>", LocalHostaddress, "<b></b>", "<br/><br/>", "<b>MAC Address: </b>", sMAC, "<b></b>", "<br/><br/>", "<b>Comment:</b>", "<br/>", "<i>Please give a brief description of your problem attaching a screen shot if possible</i>", "<br/><br/>") & MyItem.HTMLBody
End Sub
Private Sub AdxRibbonButton1_OnClick(ByVal sender As Object, ByVal control As IRibbonControl, ByVal pressed As Boolean) Handles AdxRibbonButton1.OnClick
'Runs CreateTemplate
CreateTemplate()
End Sub
Private Sub AdxCommandBarButton1_Click(ByVal sender As Object) Handles AdxCommandBarButton1.Click
'Runs CreateTemplate
CreateTemplate()
End Sub
End Class
I would appreciate any help with this whatsoever as I am pulling my hair out!!
Many Thanks!!
ChrisHi,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your Add-in is developed using Add-in Express which is third-party, I suggest consulting Add-in Express forum:
http://www.add-in-express.com/forum/index.php for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am getting an object reference not found error when trying to view the version history of any list item within my web application, as well as view or edit any list item properties in general. Below is what the ULS log generates when I try to view
the version history of an item.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.ApplicationPages.VersionsPage.ItemVersion.get_CreatedBy()
at ASP._layouts_versions_aspx.__Render__control14(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output)
at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.Page.Render(HtmlTextWriter writer)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.Render(HtmlTextWriter writer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I followed what was said in this blog post to remove any extraneous calls of the "Microsoft.Sharepoint.ApplicationPages.dll"
in the GAC or the bin folder of the web application, yet I am still getting the same error.Hi Max, did you ever get this resolved? if yes, what were steps? thanks
Stacy www.sharepointpapa.com -
"Object reference not set to an instance of an object" on loading reports
Hi,
I get "object reference not set to an instance of an object" for some charts in a report.
Software: SQL Server 2008 R2 SP2 & SharePoint 2010
I have 2 reports each with multiple graphs & tables. The reports are used in SharePoint integrated mode.
3 months back Report1 gave the error for 4 specific charts. After a few days, the error vanished magically & all charts displayed correctly.
I recently deployed Report2 which also contains charts & tables. After a few days, the 1st chart itself would not display throwing this error. I deleted the Report2 from SharePoint and redeployed it. Now the error is shown for 2 charts in between &
I again see the error for the same 4 charts of Report1.
Since deleting and redeploying the Report2, moved the error to a different chart, it does not look like a problem with the chart itself. Please suggest on what I can do further.Hi,
This is a general error message. I would ask the following questions to verify the issue:
1. Are these charts inside the table?
2. Does the table display fine? What’s the size of the report and charts?
Please try download the latest cumulative update package for SQL Server 2008 R2 Service Pack 2 from the following link and see if it address the issue:
http://support.microsoft.com/kb/2730301/en-us
You can also capture the screenshots regarding the issue so that I can understand
problem in more details.
Thanks.
Tracy Cai
TechNet Community Support -
Hello, I have this issue and Ihave wasted atleast 2 days with this one. I have tried all possible solutions -
1. Turn Off Real time McAffee scanning -- I do not have real time scanning ON
2. Delete Bin folder and start all over by adding references -- Did not work
3. delete .compiles or refresh filesdelete temp files from asp.net temp files folder -- no .Compiled file. Deleted refresh files but no use
4. change temp file for appliation in compilation tag of web config -- No use
My application framework is .NET 4.5 and VSD 2012. I have tried to compile from C:\WINDOWS\Mi
crosoft.NET\Framework folder as well as C:\WINDOWS\Mi
crosoft.NET\Framework64 folder. Both gave same error.
I need urgent assistance plz.
Here is stack trace :
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>"C:\WINDOWS\Mi
crosoft.NET\Framework\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\Deve
lopment\Convergence\Applications\CAP\TouchPointTier\Presentations" -v / "C:\Deve
lopment\Convergence\Applications\CAP\PrecompiledWeb\ConvergenceCAP" -errorstack
Microsoft (R) ASP.NET Compilation Tool version 4.0.30319.17929
Utility to precompile an ASP.NET application
Copyright (C) Microsoft Corporation. All rights reserved.
error ASPRUNTIME: Object reference not set to an instance of an object.
[NullReferenceException]: Object reference not set to an instance of an object.
at System.Web.Compilation.BuildManager.CopyPrecompiledFile(VirtualFile vfile,
String destPhysicalPath)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect
ory sourceVdir, String destPhysicalDir, Boolean topLevel)
at System.Web.Compilation.BuildManager.PrecompileAppInternal(VirtualPath star
tingVirtualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(VirtualPath startingVirt
ualDir, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManager.PrecompileApp(ClientBuildManagerCallba
ck callback, IEnumerable`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa
llback callback, List`1 excludedVirtualPaths)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback, Boolean forceCleanBuild)
at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil
dManagerCallback callback)
at System.Web.Compilation.Precompiler.Main(String[] args)
C:\Development\Convergence\Applications\CAP\WixSetup\WixSetupView>pause
Press any key to continue . . .I know these warning are not related to my issue that is the reason i am not able to understand what is wrong with it. Its a huge application and compiliing takes atleast 6-7 hrs and after that I get error in "copyPrecompiledFiles" method.
I have circular reference issue in application but when I build application in specific sequece, it goes away so after builing application with 0 errors, i execute command to precompile
rmdir C:\Precompiled /s /q
mkdir C:\Precompiled
"C:\WINDOWS\Microsoft.NET\Framework64\v4.0.30319\aspnet_compiler.exe" -u -fixedNames -p "C:\ApplicationPath" -v / "C:\Precompiled" -errorstack
pause -
Hi All,
Could you please help me here? On my Laptop which is running on windows 8.1 Operation system, I enabled the Hyper-V client feature and setup the Windows Fail-over Clustering using Windows 2012 Standard Edition. So, there are three machines which are running
on the Hyper-V. Below are the machine details;
1st machine - Working as Domain controller and its name is "ACONDomainGroup" and allocated to
1GB RAM to use.
2nd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 2.5GB RAM to use.
3rd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 1.5GB RAM to use.
and the windows virtual cluster name is "AconWinCLTR". While I am doing the SQL Cluster Installation, I am getting below mentioned error. all systems have 4.5 .net installed. May you please guide me where and what i am missing to complete sql clustering.....
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network
Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String
ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1
ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()Dharmendra, the log details are incomplete are not sufficient enough for I guess anyone to help. Besides, from the details above, I can see that the Failover Cluster Disks are not selected:-
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana -
SQL 2012 install fails with 'Object reference not set to an instance of an object.'
Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize() -
I am running a custom workflow to create volumes that has worked since WFA 2.x, and which works well in 3.0P1. With WFA 3.1RC1 it throws this error when attempting to apply a quota to the volume: INFO [Apply Quota Policy to Volume or Qtree] Started Quota resize on volume post_wfa31rc1_test2_w_mirror on vserver MySVM ERROR [Apply Quota Policy to Volume or Qtree] Command failed for Workflow 'Create Volume (Schwab)' with error : Object reference not set to an instance of an object. INFO [Apply Quota Policy to Volume or Qtree] ***** Workflow Execution Failed ***** I have executed the PS commands from this code block in a PS shell with no errors. Has anyone else seen a similar issue with 3.1RC1? Scott Lindley
I have narrowed the problem down to a single command and can reproduce the problem very easily. However, I can't seem to fix it. But I believe importing this single custom command into both a WFA 3.0P1 and WFA 3.1RC1 system will easily show that it works in 3.0P1 and throws the odd 'Object reference not set to an insance of an object' error. I say that is an odd error because I'm only used to seeing that error at Preview time referring to an object reference in a Command Parameter field of a workflow. I know how to deal with that issue. However here, the error appears at the end a PowerShell command. Actually, the PowerShell command appears to me to execute entirely and correctly. It is just that at the end of running this exception error is thrown and that causes the command (and workflow if running within a workflow) to fail. But the comamnd correctly adds the 'default' quota policy to the volume and even enables quota resize as it should. So it works, but still blows up the workflow it is within. I'm going to attempt to attach these three things here: 1) screenshot showing the command running (with Command Test Button) fine under WFA-3.0P1, 2) a screenshot showing the command running but throwing the error on a WFA-3.1RC1 system 3) the ,dar file holding just the command: "Apply Quota Policy to Volume or Qtree" (I added .txt to the end of .dar file name) ------1) running OKay on 3.0P1 -------------------------- 2) running with the ERROR on WFA 3.1RC1 SOME NOTES: My lab environment where I re-created the problem: The WFA 3.0P1 system is a Windows 2008R2 server that happens to have the original PowerShell 2.0 on it The WFA 3.1RC1 system is a Windows 7 system that I have updated PowerShell to 4.0. The customer environment: I'm less certain of details (maybe Scott can fill in) The version of PowerShell is TBD (guessing 2.0) , but they are running the same PS version for both 3.0P1 and 3.1RC1 because they are upgrading/downgrading WFA on the same system
-
I am working on a standalone install Sharepoint 2013 (no Active Directory). I found newsfeed feature is not available and checked Distributed Cache service is stopped. When start it “cacheHostInfo is null” is returned.
I checked the Windows service “AppFabric caching service” is stopped because the default identity “Network Service” not work. Then I change the AppFabric service identity to use “.\administrator” (which is also the sp farm administrator) and the service can
be started.
However the “cacheHostInfo is null” when try to start Distributed Cache service in central admin.
I searched on web and found this blog: http://rakatechblog.wordpress.com/2013/02/04/sharepoint-2013-spdistributedcacheserviceinstance-cachehostinfo-is-null/
I tried to run the script but it return error:
Add-SPDistributedCacheServiceInstance : Object reference not set to an
instance of an object.
At C:\root\ps\test.ps1:8 char:13
+ $whatever = Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share…ServiceInstance:
SPCmdletAddDist…ServiceInstance) [Add-SPDistributedCacheServiceInstance]
, NullReferenceException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddDistr
ibutedCacheServiceInstance
I am not sure what went wrong. Please give me some idea? Thank you for any comment!Can you deploy Active Directory as installing without is not a supported installation scenario - http://support.microsoft.com/kb/2764086.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
"An error has occurred:Object reference not set to an instance of an object."
This error message comes up with a user in InfoView. The user schedules a report, updates parameters, and the report kicks off successfully. But then a few minutes later, this error is received. This occurs sporadically, regardless of the length of time of report or amount of data being retrieved. Sometimes the report runs to completion. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
“An error has occurred:Object reference not set to an instance of an object.”Are you able to replicate the issue both in Java and .NET InfoView?
For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0 -
Hello.
I just installed a new farm, the wizard was succesfull in all steps. However when I try to load the default site it created I got this exception.
Any idea?
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls()
at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at
System.Web.UI.Control.LoadRecu...
Follow me on Twitter <<<I tried removing the user profile service application and creating it again, when I did that, and tried to navigate to the page to manager the user profile application it shows me an exception
According to the uls log viewer its;
Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy() at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.IsProfileSynchronizationRunning() at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderSectionContents(HtmlTextWriter
writer) at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderWebPart(HtmlTextWriter writer) at Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter ...
I checked and the sharepoint web services default was stopped, I started and still the same error, that pool is under Local Service account.
Follow me on Twitter <<< -
"Object reference not set to an instance of an object" in WAD
10:45:09.659 ########## --> com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable ##########
-EXCEPTION-START- 10:45:09.659: DEBUG ### Browser Init failed. 2nd try will be proceeded. ---
Exception Message: Object reference not set to an instance of an object.
Exception at SAPWADMXHTML.IWADMXBrowser2.AttachAnnotator(Boolean On)
at com.sap.bi.et.wad.AxSAPWADMXHTML.AxCWADMXBrowser2.AttachAnnotator(Boolean on)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean iBool)
Full Stack:
at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
at com.sap.bi.et.wad.Debug.Exception(Exception, String)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.set_BrowserDesignMode(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.Navigate(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTMLsafe(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTML(String, Boolean)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.SetDocumentHTML(String)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.TemplateXML2HTMLEdit()
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.UpdateView(Int32, Int32, Boolean)
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.tabLayoutTab_Switch(Object, EventArgs)
at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs)
at System.Windows.Forms.TabControl.WmSelChange(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef, Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.SendMessage(Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.ReflectMessageInternal(IntPtr, Message&)
at System.Windows.Forms.Control.WmNotify(Message&)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.ScrollableControl.WndProc(Message&)
at System.Windows.Forms.ContainerControl.WndProc(Message&)
at System.Windows.Forms.Form.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr, IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.NativeWindow.DefWndProc(Message&)
at System.Windows.Forms.Control.DefWndProc(Message&)
at System.Windows.Forms.Control.WmMouseDown(Message&, MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
at System.Windows.Forms.Application.Run(Form)
at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----Hello Dieu,
Have you found a solution of this exception?? i also come across this one.
Kind Regards,
Clark
Maybe you are looking for
-
TREX - Configuring Distributed Slave with Decentralized Data Storage
I am creating a distributed TREX environment with decentralized data storage with 3 hosts. The environment is running TREX 7.10 Rev 14 on Windows 2003 x64. These are the hosts: Server 01p: 1st Master NameServer, Master Index Server, Master Queue Se
-
How to Hide Acrobat When Running VBA Code
I am using Acrobat 9. My project adds text to Acrobat fillable fields using VBA written in Access 2003. I take records from my Access database, and populate it into different Acrobat Forms based on the field name in the Acrobat Form. I am able to do
-
I've done this before so I know I'm not crazy! I've been creating web galleries for a few years in PS and recently started using Bridge in the last few months. I've been able to rearrange the file order so when the web gallery is created, it will s
-
HI Team, Today i set for one of the order billing Block at the header level, after creating delivery when i tries to do billing (type F2) system not thrown any error as supposed but its creating billing document. Any possible reasons for this? Cio Sh
-
Tecra M1 - can I use my DVD drive in an external case?
Hi there, I had a Terca M1 laptop. Now I have another Toshiba laptop which bay is not compatible with the M1. So I can not use my "old" dvd drive on this new laptop. Is there any external slimcase accessory available to use my dvd drive as external u