Reference to JetFLAR.pkg OSP Plug-in docs. (5.2 and earlier)

Is this now included by default in 6.0 OSP Plugin?
I downloaded the 6.0 plug-in and opened up all the jars, and I don't see any evidence of FLAR support in 6.0. If this is so, where can I download JetFLAR.pkg?
Pete.

Hi,
JetFLASH is not included in OSP 6.0 Plugin. You must install JetFLASH module additionally on the JET server by hand (or deploy it by SPS).
After that you must recreate your profile, so that you can use needed flarcreate parameters in the jet templates...
You can download JET (and flash module) here:
http://www.sun.com/download/products.xml?id=472a460f
chris

Similar Messages

Documentation on N1 OSP plug-in

Hi, I am trying to figure out what to do next. I am trying to provision to bare metal via SPS OSP plugin via ALOM. I have installed SPS 5.2 MS and SPS 5.2 RA on different physical hosts. I have imported the OSP plug-in. I was able to setup a host record for the RA and prepare the host. Is there documentation on where to go from here?
Pete.

Let me first describe some of the details about the OSP. It performs a lot of cr_cli in the background and this is done as root. So if you setup to run cr_cli with SSH then you need to allow to do SSH as the root account to run these commands.

Then the process is quite simple imo:

First if you follow the guide from docs.sun.com then it takes you through all the steps needed to install and configure this.

Using N1SM may be easier in one way but there are some limitations such as only allowing flash archives and not using JET for cusomized installs.

Here is a short recap on all the steps needed:

- Load the plugin 
- Prep the hosts 
- OSP Control Server 
- OSP Subnets 
(remeber to select IP network in the same space you intend to provisioning in) 
- JET Solaris Image Servers 
 
After this you create the target where you enter how to access the ALOM, LOM, IPMI or whatever console you have, including IP, Login and Password.

Then you create profile and select which JET modules to use, and after that you are all set to go and to click Provision OS

The docs can be found here: 
http://docs.sun.com/app/docs/doc/819-6519

Rgds,
Peter

I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

Step to Upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins

Dear all,
I have to upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins the current release.
Plug-In     Release
ST-A/PI     01J_ECC500
ST-PI     2005_1_640
After running the report RTCCTOOL the following details are
No.   Missing addon/ transport / note
   Description                 Implementation
1. [Note 69455 ]     Addon ST-A/PI 01L_ECC500
     Description     "Servicetools for Applications Plug-In" for ERP 2004 / ECC 5.00
2. [Note 539977 ]    Addon ST-PI 2008_1_640
     Description     "Solution tools plugin" ST-PI 2008_1_640 Addon for 6.40 / Netweaver 04
                             [Basis tools for services]
3. Note 207223
    Description     Setup of the EarlyWatch Alert service
Please suggest the step by step how to the implemented service and caution to before applying.
Regards,

Hai,
Please download the plug ins and upload them into the /usr/sap/trans/EPS/in.
You can do it from frontend through SAINT tcode, this will automatically uncar the files and place it in the
/usr/sap/trans/EPS/in directory.
Then you have to apply the plugins from SAINT.
http://www.sappoint.com/PHPWebUI/Documents/Applying%20Support%20Pack%20and%20Plug-ins.pdf
You have to do this from 000 client and user with enough authorizations.
http://www.saptechies.com/how-to-implement-support-packagesaddonsplugins/
Regards,
Yoganand.V

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?

The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%. This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
Regualr occurence for me.
Also ... you need to let your battery work at least once per month. Let it run down to 40%, but not less if you can at all avoid it. Running thr battery fully dead will shorten the battery life significantly.

I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only

I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only sends the original form without text. Once I've changed a doc in Adobe, how can I save it so that I'm able to use it with added text and notes? Also, I'm using a new iPad.

If you are using those apps or websites, they are likely viewing the PDF using iOS' built in PDF previewing, which will not show annotations and markup to the PDF. We have informed Apple of this issue, but do not have any insight into whether or when they will fix it.
Regarding the qustion about importing pictures, Adobe Reader does not provide any capabilities to import pictures into a PDF. To do this, you'll need to use Acrobat, available on your desktop computer.

Doc Save As and Trusted Function

I have been reading over the forum and the adobe help files regarding this. I think I am close but since I need to get my IT department to assist in placing the js files where they have to go, I thought I might ask the forum if I am on the right track
I still have to make sure the field values will not include an illegal characters. They wont be empty as the forms will be coming directly from our system -prefilled
Currently these forms automatically email (although staff still have to hit the actual send button) when staff go to print the document. The people who get these forms are just finding it a bit hard to keep up with the emails and have asked to just have the files save to a folder so they can look at when they have time
This is what I have for my trust propagator function. I assume this is the only js file I will need as it incoporates the trusted function?
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
doc.saveAs(path);
app.endPriv(); })
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
// Privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc,path);
app.endPriv();
// Privileged and/or non-privileged code below });
I got this code from the Adobe Help
then I want to have this code in the Document Did Print area
var name = this.getField("FormValues.accountNames_0").value
var folio =this.getField("FormValues.folioNumber_0").value
myTrustedSpecialTaskFunc(this, "/w/Public/AccountOpening/" + name + " " + folio,pdf);
I have to read where to put the js file as I have seen some comments on the forum that where you place the js file has changed for those with Adobe X and Windows 7
Would anyone be be able to let me know if I am on the right path before I get IT involved. I suppose I could test the code on my own laptop to see if it would allow me to save the form.....
Thank you

Read this: The Acrobat Ninja: Acrobat 10.1.1 JavaScript changes
You have to manually create the folders that aren't present, and they must be named correctly.
It's a good idea to use the valueAsString property instead of the value property to get the field values, since you're using the results as strings. It probably won't make a difference here, but it's a good habit to get into. You also have a typo in that last line of code. It should be:
myTrustedSpecialTaskFunc(this, "/w/Public/AccountOpening/" + name + " " + folio + ".pdf");
It would be a good idea to make sure those field value aren't blank if there's a chance that they could be.
Also, consider using a try/catch block for the doc.saveAs call, and look at the return value so you can give the users a more helpful error message than what the default will be if something goes wrong.
If you need help with any of this, post again.

I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
http://answers.microsoft.com/en-us/mac

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

Hello, not certain, but turn the Camera onto Play if it has such a setting, does it show up in iMovie then?

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Mac says no update available.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

I just got a new Macbook Pro, plugged my iPod into it and lost all my songs on my iPod. How do I get them back?

I just got a new MacBook Pro, plugged my iPod into it and noticed all my songs didn't transfer, including the 6 new ones I just purchased. I then brought it back to my PC to sync, and lost all my songs on my iPod. I'm now receiving all kinds of weird messages that the name of my iPod is a duplicate and cannot be synced (no matter what I put in it). During the process of loading it on my Mac., a bunch of odd emails were popping up to sync. I just kept deleting and adding mine. Is it corrupted? What have I done??? I am a personal trainer and live by my iPod. Please help.

Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
In iTunes, Preference, tick on Prevent devices syncing automatically
Hopefully your music are still in both your iTunes library,
Connect the iPod to the Mac
Restore it (just to fix any filesystem corruption by the Windows end)
Set it to Manually Manage Music
Sync your selected songs in your library.
Whern sync complete, Eject it
Connect it to your Windows PC.
Select the song in the library
Sync it.
It should work if your ipod Hardisk is not giving any problem.
Good luck!

I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos?

I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!

Just what did you do to the computer?
It sounds like the iPodf is seening the iTunes libary as a new libary.

TS1398 My iPad won't backup to iCloud even though I have plugged into power, locked it and other devices all are OK on our wi fi. I can't get rid of the box that tells me to backup the iPad to iCloud to access anything else in the iPad. Help?

When I try to use my iPad I get a message that says my iPad has not been backed-up for 2 weeks. I've plugged it in, locked it and wi fi is working with other devices but I can't get passed that message. I've tried turning the iPad off but even then I can't slide the bar to turn it off. Any suggestions?

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work. Can anyone suggest what I'm doing wrong?

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?

"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

Reference to JetFLAR.pkg OSP Plug-in docs. (5.2 and earlier)

Similar Messages

Maybe you are looking for