Reference User settings for B2C sales and ICSS -CRM 5.0

Hello friends,
we have a requirement of B2C  sales Webshop and ICSS scenario.
in this how to take different Reference Users for both Scenarios.
In img settings under Basic settings of E-commerce the following are available:
Reference User Authorizattion Check-
Reference User Variable :
Reference User(Internet) :
our requirement is how can we map both the scenarios with one reference User and One reference variable.
Pl could anybody through some light on this?
Thanks in advance.
Point would be rewarded.
Regards,
Sri

Hi Vadim,
That was indeed what I was looking for.
Many thanks,
Sebastiaan.

Similar Messages

  • Size settings for swing components and resizing of a JFrame

    Hi all!
    I'd have the following question:
    There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
    When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
    I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
    Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
    Might someone help me?
    Thanks in advance!

    Hmm...
    The JPanel that contains all stuff is the JFrame's content pane...
    The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
    Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

  • User-Exit for changing Sales Document Number - Urgent

    Hi Experts ,
                     Please suggest me the <b>User Exit for changing Sales Document Number.</b>
    thanks,
    Jayesh<b></b>

    hi jayesh,
    chech this exit-----EXIT_SAPFV45S_002.
    this exit's description says " Change Sales Document Using Configuration".
    Other available exits are
    SDAPO001            Activating Sourcing Subitem Quantity Propagation
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
    Reward me if useful..........
    Harimanjesh AN

  • Settings for Item Proposal and Product Proposal

    Hi Gurus,
    How to do the configuration settings for Item Proposal and Product Proposal.
    I also want to know what is the difference between Item Proposal and product Proposal.
    Give me your Solution.

    Item proposal is the list of regularly/frequently ordered items of a particular customer. this will be useful when u are entering the sales order. it will be used to speed up the order entry process.
    For that Goto VA51, enter item proposal type as MS and sales area details.
    enter the customer name and the list of products and save. Assign the item proposal No in the customer master sales area data, sales tab.
    create the sales order  and enter the customer no and press the propose items button in the sales order.
    the system will propose one box and it will display all the materials. then u can continue further.
    Product proposal:
    To configure product proposal, Go to IMG,SD, Basic functions, Dynamic product proposal, Maintain all the settings
    **A product proposal is a list of products for a specific customer that is automatically proposed during sales document processing. You can decide for yourself which materials should be displayed as product proposals in the sales document. You can also determine the sequence in which the materials appear in the product proposal.
         During sales document processing, the system displays a product proposal in the item overview according to the customer and the business transaction. It displays the material number, material description, and historical order quantites in the sales unit last used. To use a material again, you just have to copy it. The system does not run the standard checks (pricing, availability, incompletion, material determination, free goods determination and so on) until you have entered the order quantities.
    The product proposal is both an entry help and an aid to sales support and promotions. It is particularly useful in Telesales, where the employee automatically receives a display of all the materials that are of interest to a particular customer. This helps them to provide appropriate advice to the customer quickly and easily. The sales document history enables you to analyse the purchasing behaviour of a customer and recognize early on if it changes, for instance, when the customer suddenly stops ordering a product.
    The product proposal differs to cross-selling in that it is dependent on the customer and sales area, and is displayed in the sales document as soon as you have entered a customer. Cross-selling, on the other hand, is triggered by a material. In other words, the system proposes cross-selling materials according to the material or a characteristic of the material you have entered.
    You can determine the product proposal from different data sources:
    Order history
    Listed materials
    Excluded materials
    Item proposal
    Customer-material info records
    Customer-specific data sources
    You can combine materials from these data sources to create a product proposal. The system then accesses the data sources either online or in the background.
    To define a product proposal for sales document processing, you must carry out the following activities in Customizing:
    Define customer procedure for product proposal
    Define document procedure for product proposal
    Assign document procedure for product proposal to order types
    Maintain table of origin for product proposal
    Define product proposal procedure and determine access sequences
    Maintain procedure determination (in background) for product proposal
    Maintain procedure determination (online) for product proposal
    The product proposal procedure determines how the system displays the product proposal in the sales document. For instance, if the system has accessed the order history, it determines how many columns should be displayed in the sales document, in which period intervals thehistoric order quantities should be displayed (for instance, day, week, or month), and most importantly, the sequence in which the system should access the data sources (for example, order history, listing, exclusion).
    The product proposal procedure depends on the:
    Customer determination procedure
    The customer procedure determines which product proposal procedure the system automatically uses when you create a sales document for a particular customer.
    It is specified in the customer master record per sales area.
    Document determination procedure
    The document procedure determines which product proposal procedure the system automatically uses for a certain document type. The document procedure is stored as a key in the header for the sales document type.
    If you use online processing, the product proposal procedure is determined according to the customer and document determination procedures.
    If you use background processing, the product proposal procedure is determined according to the sales area in the customer master and the customer determination procedure. It does not use the document determination procedure because the document type is not recognized in background processing.
    Difference:
    Item proposal is the list of products the customer used to buy frequently.
    Product proposal is also the list of products but it will explode in the sales order, once u enter the sold to party field. But this will be based on the following criterias.
    Order history
    Listed materials
    Excluded materials
    Item proposal
    Customer-material info records
    Customer-specific data sources
    Hope this clarifies.
    Reward points if useful

  • How to disable the user settings for the transparent container

    Hi Experts,
           I have an form designed using VC - model, which as a input field and button. When i compile and deploy every thing works fine. I get the form as the output.I am able to call this form in the portal and I am able to get the page.
    Issue:  When i right click on the fields in the form I get "User settings for the input field AA" and gives me an option to Hide the field. Which the users doesnot want.
         I tried it on the VC runtime where i don't get the right click option.
    So kindly help me out in resolving this issue.
    Thanks
    Ketan

    Hi Ketan,
    If you have chosen the Rendering Client as WebDynpro HTML(by default it is set so) for the callable object, then you would invariably get the 'probelm' you're facing.
    Instead you could set for the Object Definition -> Rendering Client as WebDnpro Flex in the Callable object (in Guided Procedures). Now you would not get that hide option.
    But one simple question, why would the user want to right click on the field? Even if he hides the fields, he always has the option to make them visible again
    Let me know if it's helpful
    Regards,
    Vani

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Strange info in "Bypass Proxy Settings for These Hosts and Domains"

    For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
    No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
    Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
    Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
    I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
    Thanks

    When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
    ... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
    In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
    If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
    Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network  and choosing to set up again.
    Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
    In this case, proxies are not an issue, and are simply a distraction from the real problems.

  • "current encoder settings for bit rate and sample rate are invalid" message

    I have some files I am working with. Details and what happened:
    Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
    Open the files in Quicktime Pro 7 to trim them. Exported to aif.
    Opened the files with itunes. They open and play just fine.
    In Itunes I click"create AAC version" to convert them.
    I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
    I don't know what to do from here. Suggestions?
    Thanks.

    Make sure that the AIFFs that you export are set for 16 bit PCM.
    Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

  • Making system settings for measurement documents and measuring point

    What is the significance of making system settings for measurement documents and measuring point in spro?
    Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

    Hi,
    << Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
    Regrds
    Jitender
    Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

  • User exit for tcode ME21N and ME22N

    Hi everyone
    Can anybody tell me the user exits found in the tcodes ME21N nad ME22N, when saving a PO?
    Regards
    Anjali

    AMPL0001            User subscreen for additional data on AMPL
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Individual customer source determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound processing
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MM06E011            Activate PReq Block
    LMEKO001            Extend communications structure KOMK for pricing
    LMEKO002            Extend communications structure KOMP for pricing
    If useful reward.
    Vasanth

  • Internet sales and ICSS

    Hi all,
    If anyone has SIM files or any useful documentation/links on Internet sales and ICSS, plz send to [email protected]
    Thanks.

    Hi
    Internet Sales
    http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    E-Service
    http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    I hope this helps
    Cheers

  • Request for cookbook for internet sales and CRM middleware

    Hi
    can anybody send cookbook for internet sales and CRM middleware. Your response will be rewarded.
    please send to : [email protected]
    thanks and regards
    bhaskar

    Hi Bhaskar,
    I have sent you the required docs for Middlware and Internet Sales.
    <b>Reward points if it helps.</b>
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left.

  • TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

    Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file".  Any suggestions?

    Thanks so very much.  I chose MP3 and Download and it is working beautifully.  Have a wonderful day and it is so nice of you to get right back to me.  I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install.  Could hug you!

  • Settings for non-modvatable and modvatable taxes in img

    HI gurus,
    What are the settings for non-modvatable and modvatable taxes in img, and where shall we do them
    Ur reply is appreciable
    Pls send the ans asap
    Thanks in adv
    sri

    Greetings Martin,
    The default value for Maximum Time in Queue is 259200 sec OR 3 days. We'd recommend increasing this threshold to 345,600 seconds (four days) or 432,000 (five days) if necessary.
    Please remember changing this value will not affect existing queued messages. The drop dead point in time is attached once and resides with the message for it's life.
    Regards,
    Viquar Ahmed
    Customer Support Engineer

Maybe you are looking for

  • HT5787 How can I get my original apple ID

    How can I get back my original apple ID

  • Error processing in non BPM sync process

    I've created a sync non BPM process which is working fine. Data comes from several terminals via HTTP. My scenario is HTTP=>XI=>RFC On the sending side, I use ABAP mapping or parser. I'm using this since I have to check some table data based on plant

  • Cold weather bad for iphone?

    I had my iphone on the charging dock last night as usual, but the window was open and fan was on low. it got to approx 40ºf last night. Well I woke up this morning and it wouldnt turn on. Once the phone warmed up it turned on, but was in recovery mod

  • Embedding a google form into wiki

    I am using the xserve for a wiki site and I would like to be able to embed a google form into the wiki page. I can do this in wikispaces, but I would like to have it on our own wiki site. I would also like to embed a video that same way. Can this be

  • HT3775 how to play .ram files on iMac ?

    how to play .ram files on iMac ?