Reference vs Managed when using Back up Service

What is the best protocol for storing photo libraries when using a service like SugarSync or Dropbox for photo managing? I've found that services like Dropbox and Sugarsync don't like the way iPhoto packages it's contents. They ignore some of the package files and if you are storing a libary this could lead to corrupt photo library. I also don't like the hacky way that you'd have to make those services just backup the masters. I've had issues restoring from both.
Has anyone used these services that also use iPhoto? Best practices to recommend?

The major problem with a "referenced" library is that if the library is launched with the source files not mounted that will break the link/file path between the library and the soruce files.
Bringing the source files back online will not restore the links. Each photo must be manually relinked via this warning:
Usually if one photo is relinked all the photos in that folder will be relinked. If you have many events or folder it results in a lot of effort to get a working library again.
OT

Similar Messages

Primary Archivelog Management When Using Logical Standby

I was wondering if anyone has seen or created a script to do archivelog management when using standby databases. We recently had an experience where our standby database and primary database got out of sync and we had to recreate the standby....I had hope to advoid this but it was easier than trying to recall tapes to retrieve the backups of the archivelogs from the primary.
Management on the logical side is fine. I know of the ability to delete log files on the logcial standby after they have been applied to the database. However, this does not address the issue of the management of archivelogs on the primary site. Does anyone have a script that only deletes the archivelogs from the primary site after they have been applied to the logical standby? Now this is a LOGICAL standby not a physical standby....RMAN has the capability of doing this for a physical standby but I don't know of any commands ro setup to allow it to do it for a logical standby.
Regards
Tim

Even with 1 TB of space I only have room enough for about 3 days worth of archivelogs. Working in the environment that I do, there is another group in charge of the ESAN which serves many different systems. They were wanting detail reasoning and justification why I needed 3 days worth of space when I requested it.
It is not truly a problem, there are always work arounds. I can restore from the backups, I can put in scripts to send out email notification when the standby falls to far behind the OE. However even with all that, I wanted to write a script that someone could run without having to check the system to delete the archivelogs if space becomes an issue on the production side.
I was just hoping to see if anyone had a script to do it already.
Thanks for all the input.
Regards
Tim

When using Back to my Mac can I use a local printer to print from the remote Mac?

When using Back to my Mac to access an iMac from a MacBookPro all with the latest OS updates may I use a local printer connected to the MacBook to print a document located on the iMac? If so, how? It looks like if I try to print it will all happen on the iMac. Thanks.

PeterFazio wrote:
The problem is that when in screen sharing mode the print command is executed on the remote computer.
I appreciate that, but it will still list the printer in your local location if things are set up properly and if it is you can print, if it isn't you can't, but you should be able to print it as a pdf, transfer the file to your local computer and print it from their.

Slow response when using Xcelsius web service connection witn input values

We've been very successful in using the Xcelsius Web Service Connection. We've recently moved forward toward using input values when calling a web service and having issues with response time. Without input values, it takes 3 - 6 seconds to retrieve and display the results in Xcelsius, but, when using the input values to the web service, it takes about 27 seconds for Xcelsius to retrieve and display the results. Does anyone have experience with fixing slow response associated with using input values for a web service connection?

Hi Sharone,
What's the version of your Xcelsius and BOBJ server?
I'm asking because using the last version of BOBJ server (BOXI 3.1 SP 3) you have new services on CMC just to help Xcelsius to work better with WebServices.
Regards,
Rodrigo.

Need to keep VZAcess manager when using MIFI hotspot?

Does anyone know I need to use/keep my VZ Access Manager when I switched from an older aircard to the MIFI 4Glte hotspot device through my laptop's wifi manager? Thanks.

You will no longer need to utilize VZ Access Manager when connecting to the internet. The device puts out a Wi-Fi signal just like any other router. All you need to do is use the computer's native Wi-Fi connection manager in order to connect to the hotspot. You may uninstall the VZ Access Manager as soon as you are done using your old aircard.
Thanks for the question. Let us know if you have any more.

Safari 5.1 reloads page when using back button or gesture

Safari has the strange behavior of reloading pages "navigated to" using the back button or gesture. Most other browsers I've worked with pull from cache when using the back button. I don't think this behavior is compliant with standards - defacto as they may be.
An example of why this is wrong is the navigation of this forum. I just loaded Lion and need to use the forum for support. When navigating back from a particular post to the list of posts the page will reload. Needless to say several hundred posts have been entered since last looking at the list and I subsequently lose the context of what I read last. The list of posts from cache which I orginally looked at should be returned - not the latest updated one. Let me choose when to refresh a page from the cache.
I downloaded Google Chrome to compare behaviors. Chrome does not reload pages navigated to using the back button - it pulls the pages from cache.
I've looked at the configuration of Safari and see no options to configure this behavior.

Switch from one finger swipe to two finger swipe
ok, since i do not have a trackpad, i used my magic mouse. I changed my swipe between pages from one finger to two and my pages no longer re-loaded. Changing that option back to one finger swipe then set my pages to re-load our setting are slightly differnt, but were looking for the same outcome. Lood for a "Swipe between pages option. Then look for a drop down triangle. now change your swipe left or right with two fingers to one. this should re-load your pages now ;-)

Applying report filter when using OBIEE web services

Hi
Would like to know if it's possible apply report filter when using the web serivce ? Read from Oracle doc that there's this applyReportParams() method in ReportEditingService that could do the job. Can anyone confirm this ?
Currently we've tried to access the report using the WebCatalogService, read the xml and retrieve the result using the XMLViewService successfully. However there's an additional requirement to pass in the report filter on the fly.
Thanks in advance

Hi Gerardnico,
I have a question regarding the OBIEE Web Services,
We are using C # for Automation code to test Obiee Analysis Web Services,while designing filter in C # to call report we are facing difficulty with Presentation Variable using Variable value. Where as it is working fine for Column value.
Note: The choice list has 2 custom values.
So please guide me in this regard.
Regards,
Pj

100% disk usage in Task Manager when using Photoshop CC (Windows 8.1 - 64 bit)

Hi
I have been using Adobe CC for a month or two now. I own an Asus laptop with Intel i7 (2.4 GHz), 6 GB RAM, 1 TB hard disk space and 64 bit, nearly 6 months old. Following apps are currently installed: Photoshop, Illustrator, InDesign, Audition, Acrobat XI Pro, Premiere Pro and Media Encoder. I recently performed an update through Adobe CC for Photoshop and Illustrator, all others are up-to-date.
I believe, but I may be wrong, that since this update Photoshop is acting weird on my laptop. When I start Photoshop, my task manager immediately indicates a 100% rate of my disk usage. This seems to wield off after it is fully operational, but when I start to edit a file, the disk usage immediately jumps back to 100%, while the CPU remains below 10%, RAM stays at 3.5-3.8 GB (only 60% of total capacity) and even the actual read and write speeds of my HDD are not particularly high (5 - 10MB max). And because of the 100% disk usage, Photoshop freezes in an instant and operating it is nearly impossible.
I already uninstalled Photoshop, went over all services and **** that could trigger this within Windows 8.1 (Google-search for: Windows 8.1 disk usage 100%) , re-installed Photoshop and I still have the same problem.
So, I was wondering if there might be a solution to this problem or if anybody else is having this problem as well?
Thanks in advance!
UPDATE: This error applies only when I try to manipulate, add, edit or remove text. All other functions (not related to text) seem to work properly.

No, I don't know much about that, but I found a couple links for you..
"service host: Local system (network restricted)(11)" eating virtual memory
http://www.reddit.com/r/techsupport/comments/1b496x/windows_8_high_disk_usage_usually_arou nd_100_and/

Logon Error when Using soap Web Service

Hi,
I'm trying to determine why I'm getting the following error message when I submit a Web Service from our Custom Application to SAP. This error is occurring in SAP ECC 6.0 SPS16 (Quality Client) and we do not have the JAVA Stack installed. Our currently Production Installation is SAP ECC 6.0 SPS4 it works with out issues, however the Upgrade to SPS16 has produced alot of differences in web services.
Also note that this service has been tested succesfully using soapUI Version 2.51. and Version 3.5.1 without producing this error.
The user that is being utilized in all tests is an Internet User only. I would also like to know if there is away to trace Internet User authorizatiion issues.
Any help that can be provide is highly appreciated.
Error Message:
Logon failed
What has happened?
Call of URL http://bagqs1p1.rac.ray.com:1080/sap/bc/srt/rfc/sap/zwd_material_create/200/zwd_material_create/zwd_material_create
terminated due to error in logon data.
Note
Logon performed in system AGQ.
Logon performed for client 200, user , and language EN.
What can I do?
Check that you have entered the client, user, and password correctly.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:200-l:E-T:1-C:5-U:84-P:54-L:5
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Sincerely,
Cris Anderson

All of the web services were created in SOAManager if that is what you mean by setting them up in SAP PI.
I'm guessing that the HTTP Code 200: OK means they are working correctly.
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</faultstring>
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</Exception_Text>
</ChainedException>
</ns:SystemFault>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/711/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException asx:root="asx:abap" version="1.0" xmlns:asx="http://www.sap.com/abapxml">
- <asx:values>
<EXCEPTION href="#o176" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SOAP_CORE id="o176">
- <CX_ROOT>
<TEXTID>0018FE864EEE1DECA69CF9C71ACB337F</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>98</PROGID>
<CONTID>1113</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SOAP_CORE>
- <E_LOCATION>
<CLASS>CL_SOAP_HTTP_TPBND_ROOT</CLASS>
<METHOD>get_http_headers</METHOD>
<ID>3</ID>
</E_LOCATION>
<E_TEXT>SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</E_TEXT>
<E_ID>1032</E_ID>
<E_FAULT_LOCATION>1</E_FAULT_LOCATION>
<E_AREA>COREMSG</E_AREA>
<E_HOST>0</E_HOST>
<E_PROCESS_CONTROL />
</CX_SOAP_CORE>
</cls:CX_SOAP_CORE>
</asx:heap>
</ChainedException>
</ns:SystemFault>
</detail>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>

How to auto scroll a table to last row when using Active Data Service? 11g

Hi all,
Has anyone got any experience with the ADF Active Data Service?
I am using an af:table in combination with the ADF Active Data Service and I want the table to scroll to the latest row when new data arrives.
It is basically a simple setup:
The value attribute of my table points to a bean that extends CollectionModel and implements ActiveDataModel. This works perfectly. A soon as I receive new data in my bean, the table is automatically updated (e.g. a new row is inserted). I use JDev version: 11.1.1.3
The problem is that I can not get the scroll bar to move down to the last row automatically when new data arrives. The auto scroll only works for the client that actually performs a submit. In other words the person that submits the new data, will see his scrollbar move down, this is because I added the following code:
RowKeySet rowkeysset = chatTableBinding.getSelectedRowKeys();
rowkeysset.clear();
rowkeysset.add(getRowKey());
AdfFacesContext.getCurrentInstance().addPartialTarget(this.chatTableBinding);
This does not work for the clients that receive the new data via the Active data model. Apparently the active data service partially refreshes the table, but not in such a way that it sets the selected row to the last row?
My table definition:
<af:table value="#{pageFlowScope.chatBean.instantMessagingChatwindowBean}" var="row"
id="t1" columnStretching="last" rows="10"
styleClass="AFStretchWidth" autoHeightRows="10" contentDelivery="immediate"
horizontalGridVisible="false"
verticalGridVisible="false"
disableColumnReordering="true" displayRow="last"
rowSelection="single"
binding="#{pageFlowScope.chatBean.instantMessagingChatwindowBean.chatTableBinding}"
inlineStyle="height:80px;">
p.s.
The table is used to show incoming chat message.
I am building a chat client (taskflow) in a Webcenter application. The concept is similar of that presented by Lucas Jellemain in his blogpost on building a Google Talk Client http://www.oracle.com/technetwork/articles/jellema-googletalk-094343.html

Dan,
This is a thanks for posting your findings. You saved me quite some time.
<af:selectBooleanCheckbox id="showOnlyActiveSubscriptions" selected="true"
label="Show only active services:"
value="#{servicePortfolioBean.showOnlyActiveSubscriptions}"
autoSubmit="true" />
<af:table binding="#{servicePortfolioBean.serviceTable}" ...
partialTriggers="showOnlyActiveSubscriptions">
Of course, when I add a "ValueChangeListener" to the selectBooleanCheckbox, the PPR stops working. :( I wonder why?

SOAP error when using RTC Integration Services SOAP Operations

Oracle Real-Time Collaboration 10.1.2.0.0
We are getting exception in the SOAP response when trying to use integration services from RTC. A portion of the log file is given below:
09/04/13 09:46:58 se <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:createSession SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:ns1="urn:oracle-imt-service-facade-AuthenticationServiceEI">
<param0 xsi:type="xsd:string">10000829</param0>
<param1 xsi:type="xsd:string">MTAwMDA4Mjk6QCcqXSEvNVFELU5qZWwyVA==</param1>
<param2 xsi:type="xsd:string">SITE</param2>
</ns1:createSession></SOAP-ENV:Body></SOAP-ENV:Envelope>
09/04/13 09:46:58 conn org.apache.axis.soap.SOAPConnectionImpl@925037
[GC 61896K->52592K(100524K), 0.0077250 secs]
09/04/13 09:46:58 response org.apache.axis.Message@197cfcb
09/04/13 09:46:58 mpiResponse <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Fault><faultcode xmlns:ns1="http://xml.apache.org/axis/">ns1:HTTP</faultcode><faultstring>(0)null</faultstring><detail><string>return
code: 0
</string><ns2:HttpErrorCode xmlns:ns2="http://xml.apache.org/axis/">0</ns2:HttpErrorCode></detail></soapenv:Fault></soapenv:Body>
Any help for fixing this issue would be highly appreciated.
Thanks in advance.

This article is all about setting up security on the web service. But, I just want to connect to the web service as a client using the proxy and the web service doesn't have any security set on it at this time.
I am getting a connection timeout, even when I set the syncMaxWaitTime in the domain.xml file on the app server to a higher number (although this doesn't seem to affect the time it takes for the debugger to return).

Iphone 5 small purple spot when using back camera, not showing in video mode

Hi all,
Had taken some pictures this week in the street and wasn't noticing anything major. Tonight I needed to take some pictures here at home and I noticed on one picture a smallish weird spot. Went back to the place I took it to make sure it wasn't there (on the floor) but it wasn't.
I then proceeded with using the camera and I can see the spot stays there wherever I move with it. When I zoom, the spot zooms away with it making it possible for a clear picture. When I put the video mode on, there's no spot whatsoever. When I use the front camera, there is no spot as well.
As it doesn't show up in video mode, I'm assuming it has nothing to do with the lens but maybe more software/hardware or iOS related, or am I wrong?
Is there anything to be done about this? From what I found online people said to turn off the phone and back on, tried it to no avail.
Can always take it back to the shop but I'm assuming this will make it be sent back to apple repair centers etc. so it might take a while to get it back for a relatively simple issue, nothing that can be done any other way?

I have the same issue - perhaps not exact but extremely similar. In photo mode, there is a small purplish speck, which I initially thought as dust or something, and of course it ends of in photos taken. However, this speck is not present in video mode, meaning there is no dust, but some sort of artifact on the photo processor or something. Either way, itsa product defect - I plan on seeing if Apple will support this and replace thephone.....

Text Click box not working when using back button on playbar

I have an interstesting situation.
I have a slide that has 2 text clickboxes (Slide B)
Each text click box has an advanced action associated that controls what is displayed on the next slide (Slide C) . The click boxes and the advanced actions work just fine except for the following situation:
The learner is on Slide C and uses the 'back button' on the playbar to return to the slide where the two text click boxes are (Slide B), then the click boxes don't seem to work.
However if the learner goes back one additional slide, the slide before slide B (let's call that one slide A) and the continues from Slide A to Slide B, then the click boxes on Slide B work again.
Can't figure out why that is?
has anyone come across this issue before?

Not for native Captivate interactive objects that suffer with this limitation. There are interactive widgets such as the Infosemantics Event Handler that have preference options to Reset Success/Fail Criteria After Action.
You could download a trial version and give that a go:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
You can attach this widget to any kind of screen object to make that object interactive.

Why does Firefox always ask me to approve a resend when using back button?

Almost every time I press the back button Firefox presents a pop up to ask if I want to resend. How can I stop this from happening? I just want it to go back to the previous page. It is an irritating waste of time to have to click the resend button all the time.

It is ok that we get an alert before resending post data. But we don't want resend anything when we click on back button. We just want to see the page as was shown last time. When we want to resend data we may hit refresh on the page.

When using back button keeps saying document expired during web search

I found someone else who had this problem on here:
https://bugzilla.mozilla.org/show_bug.cgi?id=888757
The solution is to "Reset Firefox" but the issue I'm having with this is that after about a week or two, it returns to the previous state. My client is upset that we don't have a permanent fix for this.

Hello Personalglitch
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
You also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
right-click and choose View Page Info > Security > "View Cookies"
(menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Reference vs Managed when using Back up Service

Similar Messages

Maybe you are looking for