Referenced files in Aperture 3 are not reading from new hard drive.

I just merged one libary into another library on my machine in Aperture 3. Everything seemed to work fine with that. Many of the images in the new large library are referenced images. I had many of them initially referenced onto external drives. I'm not consolidating into one larger drive (with a back up too of course). I copied the files onto the larger drive from the individual external drives. I plugged in the new external drive with all of the photos on it and when I went to locate referenced images in Aperture, I found them, however many times the "reconnect" or "reconnect all" buttons are greyed out when I choose the photo. It's not letting me reconnect the images and they do have the same file names.
I have no idea what to think or do. I don't want to have to plug in all of the old drives to get to the pictures. I want everything on one drive to access my large aperture library that is now all in one place as well.
Please help!
Thanks!

aperture 3
I meant the full version number:
With permissions I meant the following:
You need to have read & write permissions to the files to be able to reconnect the files. To check the permissions, select an original image filein the Finder and press the key combination ⌘I to launch the "Info" panel. In the Info panel disclose the "Sharing&Permissions" brick.
Check if you have Read&Write access to all your image files, also to the folders containing them. If there is a permissions problem, change the permissions to "Read&Write". It would help to set the "Ignore Ownership on this Volume" flag. You'll find this flag in the "Info" panel for your external drive.
But the safest way really to solve this would be to let Aperture relocate the files to your new drive and not to move them manually. Connect the original drives with your original master image files and move the masters by using Aperture's command "Relocate original file". Then their would be no need to reconnect.

Similar Messages

Deleted iTunes Media off the Mac, Can i now get it to read from my Hard Drive ?

I started looking into this as my Mac was using Roughly 500 of 750 gig on Music. But I've only recently noticed that this is due to duplicates in My Music folder and iTunes Media. Ive done Some reading up and can't seem to find a definitive answer to what to do.
Ive Backed up My Music and iTunes media on a External Hard-drive, My Music folders are all neat and organised and would like it to stay that way, But I've noticed iTunes media folder was a mess, This is My fault as i had the make a copy to iTunes media ticked in preferences. And the other one De-selected ( Keep Music Organised )
So to free up space on the Mac I'm going to delete iTunes media as this is no use to me the way it is, I can't find anything in there and it looks a mess. The Problem with this is iTunes reads from iTunes media and i would rather it read form my organised Music files on the internal Hard-drive so i can keep ontop of it.
All my Playlists are built within iTunes as i use them in Serato for DJ Purposes , So i would like to keep these playlists and just let iTunes read from the hard drive instead Is there a way once iTunes media is deleted i can highlight a 2014 playlist for example with 250 songs in and change where iTunes looks for them so i don't have to reload all the music? with iTunes media deleted there coming up saying can't Locate File , but i will have to manually show iTunes 25000 where they are manually , Can this be done per Playlist in one big Hit?
Thank you and hope it all made sense

Unfortunately it is not making enough sense for me to try to make real suggestions.
If you are going to disable iTunes media preferences then you have to be 100% organized and know how iTunes works because from that point on iTunes will stop helping you maintain your files in any way.
Yes, it may look a mess but the whole thing is designed so you should never need to look in your iTunes folder yourself, just at the iTunes application window. Maybe you need to do this to use your Serrato thingy but that's because you're doing something special.
If you add a file to iTunes and have the "copy to" preference set then it will place a copy of what you add in the correct folder inside iTunes Media folder. The only way you should have media files actually directly in other folders is if you put them there yourself or you have residual structure from pre-iTunes version 9 before media was split into folders of different kinds.
If you disable iTunes media preferences then iTunes is absolutely terrible at following media moved to other drives. Moving to a different drive is not really moving, it is copying and then deleting the original, and that means iTunes sees the file as being gone.
I really get lost on your fourth paragraph.
What are the iTunes library files? - http://support.apple.com/kb/HT1660 More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html Where are my iTunes files located? - http://support.apple.com/kb/ht1391 iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

Macbook 2006 doesn't read the new hard drive

I had to replace a new internal Hard drive on a macbook late 2006 13" white. I put a Seagate 500 GB SATA 16mb 7200 RPM and also I upgrade the ram to 2gb, but when I try to installed Mac OS Snow Leopard, the computer does not read the internal hard drive to install the snow leopard. How can I resolved this problem??

You must prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Complete the Snow Leopard installation.

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

We are losing memory from the hard drive, how can we resolve this issue?

We are currently have a memory leakage from our hard drive. We have an Apple imac running snow leopard. The memory appears to shrink as we use our computer.. This is a conundrum for us, any advice on how to resolve this issue would be appreciated..

This is normal. Mac OS X dynamically assigns memory as needed. If you are down to the last 15% of free space, this can get out of hand, and I recommend keeping your hard drive clean of non-essential files*:
http://www.macmaps.com/diskfull.html

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

System restore on DV6 not working after new hard drive installed (Vista 32-bit)

Hi there,
I have a HP Pavilion Entertainment laptop (DV6 1210sa) and recently on start up I have been receiving a message saying that the hard drive is at imminent risk of failure. I therefore burned the restore CDs and bought a new hard drive: (A Toshiba 2.5 inch 80gb SATA hard drive 5400 RPM). The first part of the restore completes successfully then the HP screen appears after a restart and then goes to install windows, but before this begins I receive a message saying “Windows setup could not configure windows to run on this computer.” I then have to restart and get the same message. Is this drive somehow incompatible? Is there something I’m missing?
Thanks in advance

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Macbook wont boot from new hard drive.

I installed a new Western Digital 500GB hard drive into my Macbook Pro (2006 edition). The computer boots up, but it just stays at the screen with the apple and the thing circling underneath it. It won't go any further than that. I have to boot from my external hard drive to get to the Operating System.
Also it won't shut down nor restart unless I hold down the power button.
I installed Snow Leopard 10.6 on the new hard drive. The longest I waited was like 10 minutes. Should also note that there is a CD stuck in my CD/DVD optical drive (I used an external drive to install snow leopard)...I don't know if that's interfering. It didn't interfere with my old hard drive.
I've also used Disk Utility. It says the disk needs repairing, so I repair it, and it says successfully repaired, but I can't shut down or restart the computer, so I have to shut it down by holding the power button. When I turn it back on, it says it needs repairing again. Maybe it's not saving because of the improper shut down?
Please help

Welcome to Apple Discussions!
Did you format the new drive before trying to install the OS?
http://discussions.apple.com/thread.jspa?threadID=1885474&tstart=60
Try that, and if still no joy, you might have a defective drive. If so, WD will replace it under warranty.
Good luck!

MacBook won't boot from new hard drive.

I'm trying to upgrade my hard drive, but my macbook will not boot to the new hard drive. I have erased and cloned the hard drive about three times now, using both Carbon Copy Cloner and SuperDuper. It won't boot while it is in the macbook and it won't boot from an external hard drive case. All I get to is the screen with the mac logo and the spinning wheel. I have made sure the drive is GUID formatted, but it still doesn't work. When I put the new drive in an external case and plug it into the USB port of my macbook I can see and access everything on the drive. Can somebody please tell what I am doing wrong?
By the way the new hard drive is a 500gb western digital Scorpio blue drive.

I got a new hard drive recently 500gb seagate. I followed the directions on this page http://www.ehow.com/how2063795format-hard-drive-mac-os.html , Mine was a little more complicated since i had 2 partitions windows and mac on mine. Initially the process took a day and it started getting to the same thing as yours where it would get to the mac logo and not find the hard drive. I reformatted several times before i got to the point where i could boot up.Eventually I just figured out all the info was there the drive was formatted i could boot into windows 7 but not mac. So i put old hard drive back in the computer booted up with that. Attached new hard drive via usb in external case i was trying to put in the mac. I was able not to boot up but it would show the drives that have been formatted into the new drive and i simply copied my existing Disk by dragging it onto the new hard drive. Than turn off your mac keep your hard drive plugged in. Press and hold the option key in start up and you should see the 2 seperate hard drives and be able to boot into the new one. Was a long process for me took several complete deletes of the new hard drive and reformatting before it would work. once you get to the mac logo and spinning wheel its just saying mac cant find your boot up disk though. Sorry its confusing a bit any questions email me.

Purchased movies not playing in new hard drive

After installing a new hard drive on my pc laptop I see a gray screen with no audio when I play purchased movies in iTunes. I have authorized the iTunes player and movie, I have the latest version of iTunes.
What is stopping me from hearing and seeing movies in iTunes that I have purchased?
I have no problem seeing and hearing them on my iPod.
Thank you for looking.

correct me if i am wrong, but you do not get that option to convert movie to ipod/iphone, just to acc that i recall.

Screen not working after new hard drive installed

Hi,
Can anyone help me, I just replaced my hard drive on my 15" G4 Aluminum Power Book as it had crashed and died on me. When I finished installing the new hard drive, when switching it on the screen remains blank. Does anyone have any Ideas why and how to get it working again. The screen was working before the hard drive crash. Any help will be much appreciated.
Thanks
Robby

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

When you are pulling music from a hard drive and it says music can not be found, is there a way to stop it from doing that every time I play music from my computer? It used to find all music now it only finds 1 song at a time

When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.

1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps!

How to open files (NOT copy) from external hard drive

Hello there,
I have a Western Digital My Passport external harddrive. I bought the hard drive so I could take stuff like my music off my laptop harddrive, free up space and make it run smoother.
Problem is, every time I select a music file on the ex harddrive to play in itunes, the file is copied to the laptop harddrive! Completely defeats the purpose.
Does anyone know how to stop my laptop from copying music files and just get it to play files from the external hard drive? I have looked and looked but to no avail - this is my first Mac and it is the one issue that really bugs me.
Any help will be much appreciated!
N.B. it doesn't seem to do this with other file types (documents etc.) just music files/files supported by itunes.

How are you selecting the music files? I have my entire music library on an external drive. If you go to preferences in iTunes, their is an option to select where your music library resides. I think it is under advance but I'm not sure since I don't have access to my mac.
Glor

MOV. files will not import from external hard drive to iMac.

Do I have to convert MOV files somehow to be able to import them into an iMac from an external hard drive?
The files were moved from MacBookPro to hard drive. They play fine on external hard drive but won't import into iMac which says file format not recognised.

The file plays on my desktop and from the external hard drive, but I converted one file to an MP4 which then imported to iPhoto. Any recommendations on how to convert to MP4 files in bulk?

Officejet Pro L7555 - Scanned docs are not being saved to hard drive.

I've uninstalled & reinstalled the new HP/Windows 7 compatible software twice and I still can't get scanned docs to save to the hard drive. The scanning process looks like it's going thru all the steps. Even asking where I want to save the file. Unfortunately, no matter where I save it, there's nothing there. I even selected the 'pic to email' option but it won't send the file to my Outlook email program either. HELP!
This question was solved.
View Solution.

I found a solution that worked for me on the topic "Windows 7 & 7310" . Below is the solution:
HP have created a new workaround to make it easier to fix this problem.
All you need to do now is go to the ftp site listed below and download and run the exe file.
This exe will recognize the version of the OS you are running and put the dll in the correct place.
ftp://ftp.hp.com/pub/printers/scanbh
Download this file
CPEScanPatch_hpcom_000_001.exe
Thanks, if you have any problems please report them to the forums so we can try to help you out.
JonW
Though I work for HP, My posts express MY opinion, and not those of HP.

Referenced files in Aperture 3 are not reading from new hard drive.

Similar Messages

Maybe you are looking for