Referenced Vs. Managed work with Photoshop editing

How Referenced Vs. Managed work with Photoshop editing
1) My photos are saved on a local hard drive
2) IF, When editing with Photoshop i like to save over the original since i never like the original to begin with.
3) Any I make other light changes like filters I do not save over the original.
Where do the Photoshop edit versions go. i tried playing with just one Folder. Imported one folder as managed and one as referenced..... and can't find the edited version? Am I saving it wrong? I tried TIFF I tried Jpeg…..
Also when i imported the folder as a managed file i still saw the original folder under "pictures" does that mean it's on my hard drive twice, once in Pictures and once in the Aperture Library? That would take up too much space.
Thanks in advance, Orly

DocOrly wrote:
Got it. Thanks!
I just wish i could figure out the Photoshop part.....
I want to continue using it while i am learning Aperture..... But the copies desapear POOF. It only reflects if I work in Managed and Save it as "Replace".
The option to 'Replace' sounds like you are using Photoshop Elements?
I run the full version of Photoshop (which doesn't have a 'Replace' command), so I don't know the full extent of the saving options of PS Elements. I do know there are a few preference options for importing and saving which can change the behavior so you might check with the PS Elements help system if that is what you are running.
Also, you might check the thread linked below for some tips:
https://discussions.apple.com/message/20310393#20310393
Note - with the full version of Photoshop (I use CS6); the process is as William specified where one needs to use the 'Save' command to save the file directly back to Aperture to reflect the edits. There is also an Apple provided tip here:
http://support.apple.com/kb/HT5128
Hope this helps.

Similar Messages

Extension Manager CC doesn't work with Photoshop v14

When I try to add something to Photoshop the extension manager says it only works with Photoshop V13 . When is this going to be fixed?

When I try to add something to Photoshop the extension manager says it only works with Photoshop V13 . When is this going to be fixed?

Does Lightroom work with Photoshop Elements

Does Lightroom work with Photoshop Elements?

When setting up the editor in the prefs choose images of 8 bits not 16 bits, either PSD or tiff. Elements works best with 8 bit images. For example you can't use layers with 16 bit images.
Once you have set up the LR prefs you are ready to make the round trip:
1) Ctrl+E in the Library to export selected image with develop settings or right-click and choose Open In Photoshop Elements Editor
2) Make your adjustments in Photoshop Elements; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Photoshop Elements and update Lightroom thumbnail.
On Mac OSX Cmd+E; Cmd+S; Cmd+W
The important point is to overwrite the LR export copy by using File >> Save (Ctlr+S) because a tiff or PSD file has been automatically rendered by LR based upon your preference setting for External Editing. If you use “Save As” you create a new document which LR knows nothing about. It will only show in the LR Library if you save.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
TLDR;
This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved.

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Can Kuler work with Photoshop Elements 5.0

Can Kuler work with Photoshop Elements 5.0 and is it of
value?

Hi Chuck,
Photoshop Elements 5.0 does not support Adobe Swatch Exchange
(ASE) files, but you can copy/paste HEX values from kuler into
Elements.
Lydia

HT4753 Can auto save work with Photoshop 5.0?

Can auto save work with Photoshop 5.0?
[email protected]

No. Autosave/Versions must be built into the app itself to use those OS features. It doesn't work just because it's part of the OS. None of the CS6 apps support it, either. The only Adobe apps that do are the latest versions of Photoshop Elements and Premiere Elements. And that's only because the have to in order to be allowed in the App Store. In both cases, Adobe also gives users a preference to turn it off.
What Adobe did do in Photoshop CS6 is add an autosave feature of their own. It saves your work according to whatever time increment you choose. Then if the app crashes, it will try to reopen the saved data when you relaunch the app.

I work with photoshop CS5 and the stamp is very slow. Why?

I work with photoshop CS5 and the stamp is verry slow. Why?

If you can afford it, go with a Crucial M4 SSD.
If your in a limited budget, go with a Seagate Momentus XT 750GB.
The SSD will be the fastest one and the Seagate being faster than a conventional drive.
If you decide to go conventional, avoid the Western Digital Scorpio Blue. They tend to have issues with Macbooks.
Good luck

Does ThinkVantage Password Manager work with Firefox 3.6. Earlier versions it would not work.

Last time I installed Firefox it would not load Lenovo ThinkVantage Password Manager as a plug in. Since then I have not used Firefox. I would like to again try Firefox but thought I would ask the question first. Can I use ThinkVantage Password Manager with Firefox 3.6?

Lenovo have released a patch that will make the ThinkVantage Password Manager work with Firefox 3.6 and higher. You can download it from:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75278
I've just installed it and it works perfectly now.

Hello. Layer masks aren't working with Photoshop CC... The brushes gave out, and now the gradients too. Anyone else have this problem?

Hello. Layer masks aren't working with Photoshop CC... The brushes gave out, and now the gradients too. Anyone else have this problem?
Will someone from Adobe please answer if this is a bug.. as I've seen other users post the same issue.
thanks!

I'm experiencing the same issue too. I can't see to use the brush in my clipping mask the same way. It works for a moment, then several minutes in to production it ends up crashing.
I hope this issue is resolved soon. It's definitely frustrating and delaying my production time.

How Transaction Manager work with Resource Manager, like Connection pool?

hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!

Xin Zhuang wrote:
hi,
I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
any help appreciated!Hi. If you configure your WLS DataSource to use keep a connection for
the duration of a tx, it will do that, and in any case there can be
no deadlock however many connections operate for a given XA transaction.
Here is the best coding form for DAOs or any other user-written code
for using WebLogic DataSources. This is important for two reasons:
1 - Thread-safety is maintained as long as the connection is a
method-level object.
2 - It is crucial to notify WebLogic that you are done with a connection
ASAP, by your calling close() on it. We will then put it back in the
pool, or keep it under the covers for your next request if it's in a
transaction etc. The pool is optimized for quick get-use-close scenarios.
public void one_of_my_main_JDBC_Methods()
Connection con=null; // Must be a method level object for thread-safety
// It will be closed by the end of the method.
try {
con = myDataSource.getConnection(); // Get the connection in the try
// block, directly from the WebLogic
// datasource
// do all the JDBC within this try block. You can pass the
// connection to subordinate methods, but not to anywhere
// that thinks it can use the connection later.
rs.close(); // close any result set asap
stmt.close(); // then close any statement asap
// When you're done with JDBC
con.close(); // close the connection asap
con = null; // nullify it so the finally knows it's done
catch (Exception e) {
// do whatever catch stuff you want. You don't
// need a catch block if you don't want one...
finally {
// It is important to close a JDBC connection ASAP when it's not needed.
// without fail, and regardless of exit path. Do everything in your
// finally block in it's own try-catch-ignore so everything is done.
try { if (con != null) con.close();} catch (Exception ignore){}
return ret;
}

Referenced Vs. Managed work with Photoshop editing

Similar Messages

Maybe you are looking for