Referencing a cell more than once in formula

Hi, how does one reference the same cell twice in a formula? Eg while calculating growth rates, or using nested if functions. Every time I try to do this the formula keeps taking me back to the point where the cell was referenced first.
Would really appreciate inputs.
Thanks!

Question asked and answered several times !
Using the search tool as we are urged to do would have give you at least these two links :
https://discussions.apple.com/message/13072162
https://discussions.apple.com/message/8893112
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 14:43:19
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Similar Messages

  • Running the VI more than once, won't populate the array correctly!

    I have found something pretty weird while I was trying to do the following:
    I have an Array to wich I want to append a new set of data from two sources. To do
    this I found two different ways:
    1. I can take the array and append every element (from the sources of new data) to
    the array.
    2. Or, I can create a new array, and append it to the previous one.
    Every of those solutions is ilustrated in the enclosed VIs. But the second one
    doesn't work correctly. If we run it just once, it will display the correct data,
    but if we run it more than once, it will show the cells of the appended data
    empty!!!
    How come this happens? It seems I'm missing something very basic and i
    mportant.
    Thank you for your time and help.
    Regards,
    JAVIER
    Attachments:
    1_This_is_the_working_solution.vi ‏20 KB
    2_Why_does_this_doesnt_work.vi ‏24 KB

    Hi,
    actually you don't need to add elements continiously to each other or to the array.
    The basic solution is to form the appropriate array and insert it into your array.
    I have made the example.
    Good luck.
    Olrg Chutko.
    Attachments:
    Solution3.vi ‏20 KB

  • Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

    Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct."  Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

    You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • Error MDX result contains too many cells (more than 1 million). (WIS 10901)

    Hi,
    We have developed an universe on BI query and developed report on it. But while running this BO query in Web Intelligence we get the following error
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  MDX result contains too many cells (more than 1 million). (WIS 10901)
    This BO query is restricted for one document number.
    Now when i check in the BI cube there are not more than 300-400 records for that document number.
    If i restrict the BO query for document number, delivery number, material and acknowledged date then the query runs successfully.
    Can anyone please help with this issue.

    follow this article to get the mdx generated by the webi report.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b02218-d909-2e10-1988-a2ca74547900
    then try to execute the same in mdxtest transaction in bw

  • How do I repeat the same row more than once in report 10g

    How do I repeat the same row more than once in report 10g
    So I can print the bar code more than once
    in report;
    Edited by: user11106555 on May 9, 2009 5:50 AM

    GREAT THAN X MAN
    It is already working, but with the first ROW
    select ename from emp
    CONNECT BY ROWNUM<=5
    ENAME
    SMITH
    SMITH
    SMITH
    SMITH
    SMITH
    ALLEN
    WARD
    JONES
    MARTIN
    BLAKE
    CLARK
    SCOTT
    KING
    TURNER
    ADAMS
    JAMES
    FORD
    MILLER
    BUT I want this result
    Item1
    Item2
    Item3
    to
    Item1
    Item1
    Item1
    Item2
    Item2
    Item2
    Item3
    Item3
    Item3

  • Can you create a form in which its never possible for the same person te sign the form more than once.

    Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
    The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
    All the very best,
    Martin Angell

    I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
    In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
    I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

  • Deauthorizing all machines more than once in a year?

    Is it possible to deauthorize all machines more than once in a year? I have had two machines crash and one time I forgot to de-authorize before I installed a new OS.
    iTunes tells me I have to wait until June to do this. There has to be a way to manually get someone to agree to do this. Is there a number I can call or process????
    tflink
    HP Compaq NC8230   Windows XP Pro  

    No.

  • Performance... Why a function column in a view is executed more than once...?

    Why a function column created inside a view is executed more than once when called more than once?
    EXAMPLE:
    create or replace view aux1 as
    date_column,
    any_function(date_column) column1
    from any_table
    create or replace view aux2 as
    column1 c1,
    column1 c2,
    column1 c3
    from aux1
    select * from aux2
    It will execute 3 times the function any_function... logically the value will be the same for all columns...
    I understand why!... are 3 calls... but...
    Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
    tks
    Braga

    Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.2.0 - Production
    create view v1 as select dbms_random.value(1,100) r from dual;
    create view v2 as select r r1, r r2 from v1;
    select * from v2;
              R1           R2
              93           74
    Connected to:
    Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
    With the Partitioning option
    JServer Release 9.0.1.3.0 - Production
    create view v1 as select dbms_random.value(1,100) r from dual;
    create view v2 as select r r1, r r2 from v1;
    select * from v2;
              R1           R2
              78           78Richard

  • Why would aperture load more than once?

    I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

    1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
    You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
    2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
    It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

  • Button/click box click more than once

    Hi, I'm hoping you guys can point out what I'm doing wrong...
    I have an image where the user can click on certain parts of
    it to display a callout. However, I want them to be able to click
    on the area of the image more than once if requried. I suppose you
    can say it's a bit like an image map.
    First I used click boxes to achieve this, then I tried using
    transparent buttons. However for both of these methods you can only
    click on each part once during playback. Clicking again does not
    show the callout.
    I thought about copying the contents to another slide and add
    a 'Reset' button the user could click on. This would move to the
    other slide, but this seems a bit on the 'clunky' side, so I
    thought there must be a setting or something really obvious that I
    have missed. I was unable to find the relevant informaiton in the
    help file or elsewhere in the forum, so if it does exist I would
    appreciate someone pointing me in the right direction.
    How can I allow the user to click on parts of the image more
    than once to show the callout?
    Thanks for your help,
    Liz

    Thanks for your reply Rick.
    I started the activity using rollovers, but I wanted the user
    to do something more definite than just hovering over each part of
    the image. So essentially, I want the rollover functionality but
    with the ability to click instead of just hovering the cursor over.
    I thought this would be easy!
    I've tried using both buttons and click boxes without any
    success. I ventured a little into slidelets, but I want the callout
    to appear in a very specific place and this did not appear to
    satisfy my requirements. The 'click to stick' sounds intriguing so
    I'll take a look into this, but I'm not convinced it's what I want.
    Any more suggestions are most welcome.
    Regards
    Liz

  • Terminating Event Getting triggered more than once

    Hi All,
    I am facing a very peculiar problem in PR release workflow(item wise release, business object BUS2009).
    One of the requirements of the workflow is to send a mail to PR initiator once it is rejected by any of the approvers(4, in my case). The event associated with the cancellation of the workflow is REJECTION_START.
    The problem is that this event is being triggered more than once. One thing that i have observed is that if eg. second level of approver cancels it, the event is triggered twice. Likewise if third level of approver cancels it, it is being triggered thrice. Which leads to sending of 2 and 3 mails respectively to the PR initiators mailbox.
    Why is this happening? Ideally, only one event should have been triggered, and the triggering of the event should have been independent of PR approver's level. I am at my wits end regarding this.
    Any suggestions in this regard will be highly appreciated
    Regards
    Varsha Agarwal.

    If you check for 2nd level rejjection two release Code is associated so it triggers 2 times and same for 3rd level approval.
    I think you have to put some sort of filter using FM SAP_WAPI_WORKITEM_OBJECT
    in the attribute portion of yopur custom BO.
    The attribjute will check this FM and if it has entries that means already a Workflow has been triggered it should set the flag as X.
    Make use of this attribute in defining the start condition of this task thru
    SWB_COND.
    Thanks
    Arghadip

  • Backups to same DVD more than once

    I have just started to use PSE 7 and have moved all my photos into it.  I did the initial backup to a DVD but now that I want to backup my new pictures, it seems to want a new DVD.  I don't take all that many pictures so it would take me some months fill up a DVD.  It doesn't seem to like DVD-R and with DVD-RW, it tells me there is something on the DVD and do I want to erase it.  How do I use PSE7 to backup or copy pictures to the same DVD more than once?  Thanks.

    As far as I know, one can burn contents to a DVD only once...
    If you’re using a DVD-RW you have to erase the old contents first...
    On can burn a CD several times until filled up though...
    You might consider using an external Firewire Hard-drive for your backup...?
    Regards
    Nolan
    PS:
    Please check this one out...
    http://freeridecoding.com/burnagainfs/
    (guess, "Windows" offers something similar...)

  • Weblogic.management.server bound more than once?

    Sorry if I already posted this in cluster, but I realized that it should belong here instead....
    I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
    app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
    up, I get the following message on both managed servers; the admin server, on the other hand, does
    not display any errors. Why are the managed servers trying to bind weblogic.management.server to
    jndi????
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
    server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
    <Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
    tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
    to bind more than once from two or more servers. Such objects can only deployed from one server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    Gene

    Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
    Gene
    "Gene Chuang" <[email protected]> wrote in message news:[email protected]...
    Sorry if I already posted this in cluster, but I realized that it should belong here instead....
    I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
    app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
    up, I get the following message on both managed servers; the admin server, on the other hand,does
    not display any errors. Why are the managed servers trying to bind weblogic.management.server to
    jndi????
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
    server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
    <Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
    tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
    have tried to bind more than once from two or more servers. Such objects can only deployed fromone
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
    to bind more than once from two or more servers. Such objects can only deployed from one server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed fromone
    server.>
    Gene

  • HT3702 iv been billed more than once

    i have been billed more than once i did buy 60 donuts for the simpsons tapped out for 2.99 but iv been billed for 8.97 and i dont know who to contact to explain i only brought it once not 3 times as the invoice state can anyone help me on who to contact please

    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Inbound interface was found more than once

    Hi All,
    Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
    Can anyone help me out and provide some valuable suggestions.
    Regards
    Faisal

    Hi Abdul,
    Try to run the scenario in the ID.
    There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
    This will show you the error in the exact step.
    -Supriya.

Maybe you are looking for