Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

Similar Messages

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.

Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky.

Reg: Not getting the data in PSA level

Dear all,
We are having 2 clients in one development server. One is for R/3 and another one is for bw. When i am doing the extraction for
SD billing documents ( Setup table -13) i done the same for LBWG,LBWE. And finally i got the data into the RSA3 tc. Wheni am
replicating the datasource in BW side. I got the datasoruce in BW client. But when i am scheduling that datasource for infopackage i can able to find out the data.
Errr or message:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please do the needful at the earliest.
Thanks,
Sankar M

Hi Sankar,
When you trigger the infopackage and if it shows the data available then there is no wrong in designing so First check the data at data sourcelevel in RSA3 and also at the source table
Regards,
Marasa.

Not getting the data for delta for 0ASSET_ATTR_TEXT in RSA3

Hi All
In RSA3, I am not able to extract the delta for the datasource ASSET_ATTR_TEXT. But when it is on full update then i am gettign the records, when i changed to "D" it is giving me the error 'Errors occurred during the extraction' and the error messege says
"Errors occurred during the extraction
Message no. RJ012
Diagnosis
During the extraction phase an error occurred for the extractor. An exception, 'error_passed_to_mess_handler' was triggered.
System Response
A more precise description of the error can be found in the log.
Procedure
Check the function module or the call from the extractor check program
Kindly provide some inputs on the same
Regards
Abhi

hi Siggi,
I have checked Datasource in the ROOSOURCE Table for this datasource the DELTA IS - AIE. And do did the Init from the BW i got 8210 recods.Then i executed the Delta Pack. there was an error happend.
But When i loaded Delta i got the error as :
Diagnosis
         Not all the initialization requests have been completed yet for this
    DataSource, or there may be an incorrect initialization request.
System response
No delta requests can be processed whilst there is an initialization
    request that has not been completed.
Procedure                                                     Wait until the initialization request has finished, or delete the entry
    for the incorrect initialization request from the corresponding display
    in the Scheduler.
Regards
Abhi

Application process is not getting the data from table

I have created the following application process based on AJAX select value but using a pop up LOV
DECLARE
my_det VARCHAR2 (200);
BEGIN
SELECT DM_00010_CUST_NAME INTO my_det
FROM ODM_MD_00010
WHERE DM_00010_CUST_CODE = nvl(:P11_DT_00020_CUST_CODE,21);
exception when no_data_found then null;
HTP.prn (my_det);
END;
the process is getting no data found error ( hence the exception) so I am getting NULL in the name field on screen.
any help ?

the javascript I have in the region header is:
<script language="JavaScript" type="text/javascript">
function f_getDet ()
var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=getDet',0);
get.add('P11_DT_00020_CUST_CODE',html_GetElement('P11_DT_00020_CUST_CODE').value)
gReturn = get.get();
if(gReturn)
{ html_GetElement('P11_DT_00020_CUST_NAME').value = gReturn }
else
{ html_GetElement('P11_DT_00020_CUST_NAME').value = 'null' }
get = null;
</script>

Please help! my little sister deleted all content and settings from my iphone,i did not get the data saved on my itunes,how can i instal an other version .

I Just see a dead face on the screen i cannot do anything on my iphone and my laptop doesn't recognize the iphone when i connect it to the laptop.

Force the phone into recovery mode & restore from your most recent backup:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. Follow this by syncing your content back to your phone.

Not able to get the data from synchronous Webservice To BPEL process

Hi All,
My requirement is : Third party has some webservice.They are pushing data to that Webservice(Wsdl).
Third part WSDL example : http://ipaddress:port/name/Service.svc?wsdl ( This is just example format of their WSDL)
After that I need to get that data into my BPEL process and update my system.
When I built My Snchronous BPEL process I imported third party WSDL(http://ipaddress:port/name/Service.svc?wsdl) through 'import WSDL' in dialog.After that I automatically got the (request and response schema elements) parameters from that WSDL.I gave input and output of the BPEL process from those elements.
I pasted that third party URL iin SOAPUI and I got their operations and schemas.Based on that I had choosen the elements for 'input' and 'output' of the BPEL processes.I am also getting the schema structures in 'Assign' or 'Transform' activity.
I built the whole process.
I have the Process.
Now Client is pushing data to their WSDL(http://ipaddress:port/name/Service.svc?wsdl) as it is their data pushing interface.But that data is not coming to my BPEL process and instance is not being created in EM console.
As I have imported their WSDL into my BPEL process,I need to get the data.But I am not getting the data.
Is there any problem in MY BPEL process?
(or)
DO I need to use 'Webservice' Adapter in 'Exposed Services' Swimlane in Composite Editor to have the third party URL, so that they Can push the data to that WSDL in turn that data comes into my BPEL process?
Can anybody help me this case?
once again my requirement is :
Client pushes the data through their WSDL url -----> I need to get that data into MY BPEL process --> I have my own WSDl to take that details into my system.

I will explain the requirement in small paragraph:
There are two applications.One is our application(X) and another one is third party application(Y).
I need to update in my application(X) based on data coming from application(Y).
I am using SOA as a middle tier to have communication between Y and X.
(Ex: if they send some info like event type 'event1' from Y ,I need to update that 'event1' data in my X application)
The work at third party application is :
According their info,They will push data from their end to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They are telling they can only send the data to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They will not consume our BPEL process(I think they might be wrong at this point of time).They have one WSDL to send or push the data from their end.
The work at from our side(SOA & X application)
From that point ,our BPEL process has to receive that data and update that data into my application(X).
I hope You understand my requirement.
Can you guide me through how to achieve this task as they are telling they have to use their WSDL to push the data?
(or)
Do I need to take 'Webservice' adapter into Exposed Services Swimlane in Jdeveloper to have their webservice(third party WSDL),If it is So Can you tell me the details how to take 'input' and 'output' for BPEL process?
(or)
Can YOu suggest me to talk to them to consume my BPEL process directly?
Thanks
Edited by: 899283 on Aug 17, 2012 4:55 AM

Unable to get the data in RSA 3 for the data source 2LIS_03_BX.

Hi Xperts,
we are loading the data sources(2LIS_03_BX) by using MCNB transaction but not getting the data in it.
can any one please tell me how to load the data into it with step by step process.
regards,
satish

Hi,
To see the data in RSA3 you need to do the setup of data for the particular data source through SBIW transaction.
The Rsa3 transaction displays the data present in the setup tables of the particular data source.

How to get the data from RFC ?

Hi,
I am using the Import Adaptive RFC Model, where the RFC display the amatrial Information date.
But when I deploy the application I am not getting the data.
How to test the bindings are correct as well as is any lines of code has to be written in the Implementation part?
Please suggest
regards,
CSP

Hi,
First, drag and drop the Z<RFCNode>_Input node from model to custum controller.
From there, u can select both input and output parameters.
After that, Make sure that In custom controller's init(), the following code is present
Z<RFCNode>_Input input=new Z<RFCNode>_Input();
wdContext.nodeZ<RFCNode>_Input().bind(input);
Create execute() method in custom controller and in execute method, check whether u added
wdContext.currentZ<RFCNode>_InputElement().set<InputParam>(inputparametervalue); // If any i/p parameter is there. You can set this from view also if u mapped the RFC node to view
wdContext.currentZ<RFCNode>_InputElement().modelObject().execute();
Also check all mappings are done correctly.
After saving all, Call execute() method from view as wdThis.wdget<custcontroller>().execute();
After execute(), u will get the output from node Output, which is inside Z<RFCNode>_Input node.
Regards
Fahad Hamsa

RE:RRI Checks how to get the data my reports.

Hi,
I have two reports overview&Detail reports.When i execute overview report i am getting the data.in the same report i am integrated the detail report.when i am trying to open detail report in overview report i am not getting the data it shown the error No Data Available. But data is there in Detail report when i execute individually.
i Did the RRI Checks also,
Pls help me how to get the data in detail reports and also give me the steps which i have follow.
Regards
Som

HI All
Let me rephrase my Question
I have an overview report and a detailed Report Both of them are working fine individually. But when i link them using RSBBS the detailed report is not giving any data. it gives "no Data available". There is no assignment details maintained. it is having the default value. (generic and *)
please let me know what might i be missing
Regards
D

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

Not able to get the data in custom search help.

Hi ,
sorry was not aware of how to post a new thread.
I am working on web UI and i need help asap.
I want f4 help whose value depends on the other fields drop down.somhow i managed to get the values in local table and passed it to static attribute of the z class ZL_CRM_UIU_ZZORDERADM_H0201_G.
in this z class i have redefined a method IF_BSP_WD_CUSTOM_F4_CALLBACK~RETRIEVE_CUSTOM_VALUES.
which returns a table CT_RESULTS_TAB of type as f4.i have taken key n values in this table too.but the below code should populate the value in the field.but m not getting the values.
move 'STRUCT.ZZORDERADM_H0201' to ls_map-context_attr.    "#EC NOTEXT
condense ls_map-context_attr no-gaps.
ls_map-f4_attr = 'KEY'.
append ls_map to: lt_outmap.
lr_entity ?= me->collection_wrapper->get_current( ).
if lr_entity is bound.
    move 'STRUCT.ZZORDERADM_H0201' to lv_controller_key.
    call method cl_bsp_wd_reference_tool=>set_reference
      exporting
        iv_remove_existing = abap_true
        iv_controller_key = lv_controller_key
        iv_controller_ref = lr_entity.
    concatenate '\''' lv_controller_key '\''' into ls_map-context_attr.
     ls_map-f4_attr = if_bsp_wd_custom_f4_callback=>gc_key_ref.
    append ls_map to lt_inmap.
endif.
create object rv_valuehelp_descriptor
    type
      cl_bsp_wd_valuehelp_f4descr
    exporting
      iv_help_id                  = '(ZL_CRM_UIU_ZZORDERADM_H0201_G)'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap
      iv_trigger_submit           = abap_true.
can you please help me??

To Implement Search help for UI field same GET_V method need to implement, no need to implement GET_P method.
Initially we must have one search help in SE11
DATA:
lv_index TYPE string,
ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
lv_index = iv_index.
ls_map-context_attr ='STRUCT.YYSURVEY_ID' .               "#EC NOTEXT
ls_map-f4_attr = 'SURVEYID'.                              "#EC NOTEXT
APPEND ls_map TO: lt_inmap,lt_outmap.
ls_map-context_attr = '\''BUS2000116\''' ."#EC NOTEXT
ls_map-f4_attr = 'object_type'.                               "#EC NOTEXT
APPEND ls_map TO: lt_inmap.
CREATE OBJECT rv_valuehelp_descriptor
TYPE
cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id                  = 'CRM_SURVEY_ID'      'SE111 search help name
iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
iv_input_mapping            = lt_inmap
iv_output_mapping           = lt_outmap.

Custom Search Portlet not getting the results as expected.

Hi All,
I am using CustomSearchPortlet and I am having following problems. I created an itemtype IT with attributes A1,A2.Then I configured my custom search portlet to search based on A1,A2 attributes only. I have created 3 instances of items Item1,Item2,Item3 based on itemtype IT as follows
Item1(A1=value11,A2=value12)
Item2(A1=value21,A2=cat22)
Item3(A1=value11,A2=value32)
and when I search for value11, I get Item1,Item3 as results. Till here it was nice and behaving as expected. Suddenly after some time, it stopped working and i am not getting the results I used to get before. The only thing i remember to have changed in the meanwhile was to change the A2 attribute values of some of these items. my searchtext remained the same as value11. I was confused as to why the custom search portlet is not getting these results that it was getting before...Thanks for any help in solving this.
Thanks,
Prasanth.

Hi,
If Oracle Text is enabled in your portal, the updated items need to be synchronised before they can be returned in the Search. Since you updated those items, though not changing values for this particular attribute, it will be in the queue for indexing and hence will not be returned until it is indexed.
Thanks.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Similar Messages

Maybe you are looking for