Refinements are not showing up under 'Add/Modify Location' window

Hi All,
Our Indexed data as seen in JSP Reference application contains multiple dimensions. But when trying to add a trigger using the 'Add Location' button in Endeca Experience Manager, the indexed dimensions are not showing up under the 'Refinements' section in the pop-up window. But when we try to use the RefinementMenu cartridge as part of configuring the Guided Navigation section, the indexed dimensions are showing up.
Please let us know if we should be doing anything else, so as to get the dimensions in the 'Add Location' window.
Thanks & Regards,
Shabari

Try logging out, running ./control/update_web_studio_config.[bat|sh], then logging back in and see if that helps.
Michael

Similar Messages

HT201272 i reset my iphone, is there any way to get ringtones back that i purchased. They are not showing up under my ringtones section anymore. thanks, kelly

I reset my iphone 4s, is there any way to get ringtones back that I purchased? They are not showing up under my available ringtones anymore

They are linked to your account, but they are also tied to the country that they were bought in - you won't be able to potentially redownload them unless you move back to the US and have a US billing address on your account (you have to be in a country to use its store, including redownloading past purchases).
Have you not got a backup copy of all of your downloads/library that you can copy them back from ? Even if you hadn't moved countries any item could be removed from the store at any time by the rights-holders (you are only guaranteed one download of any item), you should be keeping and maintaining a backup copy.

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Charts are not showing up on OBIEE 111160 on Windows 2008 64 bit

Hi,
We have installed OBIEE 111160 on Windows server 2008 64 bit. We pointed our RPD and web catalog to OBIEE 111160. But, some of our reports are not showing the chart view. We are able to see data in table view. If we run the same RPD and web catalog on Windows server 2003 32 bit with OBIEE 111160, the reports are showing chart view.
Can anybody help..
Thanks,
Anilesh

I'm running 11g in same config as you, for me no issues.
Not sure exact reason but try these checks
Control Panel->Java : open it
goto Java tab, click View see how many jre are available. If the jre is out side of OFM_HOME make sure you have it in CLASSPATH.
if this is not working out try to set OFM_HOME\Oracle_BI1\jdk\jre, enable it and try.
Let me know updates :)

Returned fields are not showing up under stored procedure

First I would like to say I haven't used crystal reports before.
I created a crystal report in VS2008 and under Database fields I pointed to my stored procedure. The parameter fields show up but there are no return fields under the stored procedure. I tested the SP in SQL Management Studio and it works correctly and returns the correct fields. When selecting the SP I tried unselecting "Set to Null Value" for each of the parameters and entered values I knew would return fields and the fields show up under the SP but they are filled with the data from the parameters I used. Which I would expect. If I go back to using null, the fields disappear.
I also had this problem when I updated another Report after adding a new field to be returned from a SP. I fiddled around with it and got it working but not sure how or why it saw the fields when I got it working.
And today I updated a stored procedure to use a string parameter and not an integer parameter. After I updated the SP in VS2008 using the field explorer, the return fields disappear. What am I doing wrong?

Hi Don,
Thanks for the reply. I verified the database multiple times before posting and just verified it again. No luck. Also the SP has only one select.
I found some crystal report cds with 8.5 (the newest I could find), I installed it and tried to use the SP and it gave me the following error:
"There are no return fields in the file". VS2008 does not give this error.
I tried using crystal reports with all the SPs I altered and I get the same error. Most of the changes to the SPs are in the where cause (Changing from field = @field to field IN (@fields) and changing a parameter from an int to a string. Also as a side note, when setting up the data source I am choosing to use nulls. Is this correct? The SPs were all written using SQL string format if that makes any difference.
UPDATE: I tried using discree values that I knew would return values and the return fields show up. They are populated with the expected values but if I use these values all my reports will be the same. As I would expect. So why doesn't it work for NULL values? Maybe my thinking is wrong here but isn't null values used so you can dynamically select values for the parameters at runtime?
Edited by: Kenshinofkin on May 12, 2011 7:01 PM

NetBoot images are not showing up in the Startup Disk window

I have created a few Netboot images, enabled them and placed them in the correct place.
They don't show up in the Startup Disk window.
I have noticed that bootparamd is not running, and that after a while also bootpd disappeared.
Strange, no?
(I started them back up and it didn't make a difference.)
Message was edited by: marc herman

It looks like the NFS exports has separate entries for both:
/Volumes/xxxxx
/Volumes/xxxxx/Library/NetBoot/NetBootSP0
and that's not allowed. You can't separately export a directory and one of its subdirectories on the same file system.
It sounds like maybe the Server Admin tools are confused. If you don't really need /Volumes/xxxxx exported, then I think just deleting that share should fix things up.
If you can't get the tools to straighten things out, you could override all the NFS exports with your own defined in /etc/exports. There's an exports(5) man page that describes the format and creating an /etc/exports file will override anything in NetInfo (10.4 and earlier).
If you want to export both directories, they just need to be listed in the same exports entry, like:
/Volumes/xxxxx /Volumes/xxxxx/Library/NetBoot/NetBootSP0
This causes the "/Volumes/xxxxx" file system to be exported and allows only the directories "/Volumes/xxxxx" and "/Volumes/xxxxx/Library/NetBoot/NetBootSP0" to be mounted.
HTH
--macko

I have 3gs and some albums are not showing up under the artist, but if I search for them I can find them. Any ideas how to fix?

I have the 3gs and the new ios 5. I have just uploaded a new album by a band. I went to the music player and clicked on the bands name. It added the new album but the bands third album is missing. I thought it strange so I searched my iPhone and it comes up in the search bar when I type it in. Then I go back to the music player and its not there under artist. I can scroll and find specific songs on there so I know it's there but somehow it has dissapered on the artist heading. I've reset the phone and still nothing. Any ideas as to how I can fix this?

So I figured it out. If anyone else has the same problem, iTunes changed it into a compilation album and for some reason that messed it up. Just go to info under each song on that album and click part of a compilation.

My photos are not showing up in the 'Open File' window

When I try to access my Aperture library through the 'Photo' button on the left hand column of the open file dialogue box, I see an option for aperture but it brings up an incomplete version of my library. There do not seem to be any other versions (or older versions) of my Aperture library floating around on my computer. Is this a refresh problem? Is there a way to force a refresh? Any help would be greatly appreciated.
Thanks,
Joel Richards

Bob,
I have had may similar problems lately, as I experiment with putting photos on my iPad and iPhone. (iTunes uses previews from Aperture, and the media browser (File -> Open) uses previews too.)
It seems that something went haywire with Aperture's preview generation in the last year. All I can suggest (from my personal experience) is to select all the photos you want, delete the previews, close Aperture, restart Aperture, regenerate the previews, close Aperture, restart Aperture and then do a couple different random things while waiting to figure out what happened.
I don't mean to sound unhelpful, but that actually is the set of steps I follow when trying to figure out what's wrong with my preview sharing.
nathan

Network devices not showing up under "shared" in finder bar

Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?

Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

Songs not showing up under artists on my ipod.

Trying to update my ipod but the new artists are not showing up under "artists". They only appear under "Albums". What can I do to fix this??

Welcome to Apple Discussions!
See this...
http://docs.info.apple.com/article.html?artnum=302773
btabz

Songs not showing up under artist

I have tagged all of my music acurately. When in itunes, all the songs that should be there show up when I click on an artist. Many are not showing up under the artist in my ipod though. The songs are on the ipod, because I can find them if I search by song. They even show the correct artist when I play them from the ipod. They just are not showing up when I search by artist????? Please Help!!

It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't don't show under artist on my iPod.

Colour Effects not showing up under effects panel anymore?

Hi,
After trashing my preferences due to an export issue, and then updating the app, the colour effects bar is not showing up under the Video Effects window like it did using the default layout. Using command-6 still pulls up the colour board but I cannot create masks or access it like I used to. The window now looks like this:
I know it's probably a simple fix but I can't figure it out.. Is there a way to restore factory settings?
Thanks for any help you can give me!
Joe

I knew it was something stupidly simple.. Thank you so much!!!
Joe

HT201272 I updated my IPhone and it took away all music including my ring tones. I have been able to recover the songs but my ringtones are not showing under purchased. How do I get my ringtones back?

I updated my phone and all my music, including rigntones went away. I was able to recover my songs under purchased. My ringtones are not showing under purcahsed. How do I get my ringtones back?

I don't understand this answer. What do you mean " your contacts should be in whatever program/service you have selected to sync."? The address book is created on the phone not in Itunes or any other program/service. When Itunes says backing up phone I have to assume it backs up everything on the phone. Most of what's on my phone does not come out of itunes. I download apps directly on the phone. When the software updates it does not bring those apps back. I have to go into the appstore and install them all over again. Itunes music library syncs with whatever is on the device your linked up to BUT the phone book just dissappears after you update the phone. There is no way to save it anywhere else.

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

Refinements are not showing up under 'Add/Modify Location' window

Similar Messages

Maybe you are looking for