Refiner TEst is different on ACtual Search Results

WHen I do Test on Refiner Webpart, it generate two Result with two refiner. But after Clicking OK and SAVE it only generate One Search Result and one refiner. I already did lots of FULL CRAWL and IISRESET and SharePoint Timer SErvice Restart but nothing
happens. What could be the cause of having different outcome on Testing and on Actual Searching, it seems something is filtering on the Search Result.
Also, my refiner is getting info from Managed Property.
cal_bonjovi

Hi cal,
What refiners did you use for the refinement web part?
For troubleshooting your issue better, please provide some screenshots about your issue.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

Different sequence of search results in different environments with same set of documents

I am using Sharepoint 2013 Foundation version.
I have set up 2 environments (say environment A and environment B) with the same Window baseline and Sharepoint server farm setup. The similar set of documents have been uploaded to both environments. With input of exactly the same search string at the search
field and enter button pressed, the sequences of entries shown on search result page are different in these 2 environments.
In particular, there is a document 'Monthly Newsletter.pdf' uploaded in both environments. When I type 'Monthly Newsletter' in search field and press enter, this document appears as the first entry in the search result in environment A, but this same document
appears as the 8th entry in the search result in environment B.
May I know the reason? Thanks a lot for advice!

There are a lot of factors that go into computing the "relevance" of any one document. One factor is "closeness". So one question would be how identical are the two environments? Same number of site collections? Are the
documents at the same depth? (sites -> subsites -> libraries -> folders) Are the libraries of the same type, using the same content types and the same metadata> In both cases are you searching from
the same site and are the documents at the same depth?
Ranking is also impacted by past searches. The more people who have clicked through to the document, the higher it will be ranked in the future.
If the two environments are identical, and are only being used for testing, Reset the Indexes and do a new Full Crawl and then test.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

How to highlight search term in a different color in search results?

Hi
How can I highlight search term in a different color in the search results. Currently it is black, I would like to change it to green.
Thanks in advance
Regards
Vidya

Dear Bhanu,
It might be possibe but i am not fully sure about it.
try with different combination and check it.
I need to check whether it is feasible or not.
Best Regards,
Arun Jaiswal

Search results load in the current tab rather than the new tab where the search was started from.

Steps to reproduce:
Open a new tab
Using the search bar (for Google) within the page on the new tab, enter a search query and press enter
Quickly switch to a different tab
The search results will load on the different tab rather than the tab where the search was started from

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Web page different from opening link in a new tab or new window from Google search results

I had been using another browser for a few months because I did not want to lose the web pages I opened within Mozilla. I began using Mozilla again after saving off the web pages. I see that Google's web page pulls in search results as I type in keywords, a feature I don't remember seeing with other browsers along with a magnifying glass icon, like a look ahead of what a web page looks like before clicking on the link.
With the list of search results, I click on the link and tell Mozilla to open the link in a new tab. I see the google icon, "loading..." or "testing...", then results other than the link I wanted. Those other results maybe bing.com, http://66.45.255.230/click.php?c=0920f96609cb269f1d0045095c09, http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X, Info.com, Supermedia Reverse Proxy (http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X)or whatever else. As for the link, I managed to press stop before being redirected.
This is with any search results listed.
I thought it was Google.
Changed to Instant is off.
Nope. Still the same issue. Have already gone after malware. Tried resetting the redirect value to 0.
Above results also occur when opening the link in a new page via right menu click.
Copying link location and pasting in a new window is displaying results okay.
When resuming use of Mozilla, an update was available and installed. Did not experience the above issues before the update.
Running version 3.6.12. Running Win XP Pro SP3.
Had to go back to IE and Chrome/SRWare Iron.
Example:
Google keywords: rental cars
Clicked on Ad: _Avis_Rent_a_Car_, link is Avis.com
Clicked on top search result: Hertz_Rent-a-Car_-_Rental_Car_Discounts,_Coupons,_and_Great_Rates (magnifying glass), www.hertz.com

Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

How do you make items on the search result list a different colour after viewing as Explorer does.

How do you make items on the search result list a different colour after viewing as Internet explorer does?

Hi and welcome -
Start with fixing this missing semicolon (in red)
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
          background-color:#1A1A1A;
          background-repeat: no-repeat;
          background-position: 95% 50%;
You will find you will get faster, more accurate help from us if you upload your test page and any dependent files to your server and post a link here. That way we can examine ALL your code

Can you refine people search results using a SharePoint 2013 search service application connected in SharePoint 2010?

We have an SP2010 farm which is now using some of the service applications from an SP2013 farm, including the search, managed metadata and user profile. This is part of an upgrade programme of work which will involve upgrading infrastructure and
then gradually the sites, and this is seen as one way to minimise the impact.
So, the SP2010 search results are being generated by the SP2013 which is indexing the SP2010 content. The initial results appear fine, however, the refiners in the people results for Job Title and Department are no longer working. We are receiving
a 404 page not found, even though the page is there as was working before.
If we compare the URL generated in SP2010 for refining results to an OOTB SP2013 search centre site, there is clearly a big difference to the format. Example below is where LastName is Smith and then refined where Department is HR.
SP2010 URL which now gives a 404 error:
http://intranet2010/search/pages/peopleresults.aspx?k=LastName%3Asmith&r=%22owstaxIdSPShDepartment%22%3D%23832e3479%2Dd168%2D4620%2Dac69%2D9b00a4c4205b%3A%22HR%22
OOTB SP2013 URL:
http://intranet2013/search/pages/peopleresults.aspx?k%3Asmith#Default=%7B%22k%22%3A%22smith%22%2C%22r%22%3A%5B%7B%22n%22%3A%22Department%22%2C%22t%22%3A%5B%22%5C%22%C7%82%C7%824335%5C%22%22%5D%2C%22o%22%3A%22and%22%2C%22m%22%3Anull%2C%22k%22%3Afalse%7D%5D%7D
I've looked at the URL decoded versions so can see how the query is built up.
Any ideas? Is this even possible?
Matt

All working now. Turns out there was an entry in the web.config which was causing issues.
<denyQueryStringSequences>
<add sequence="ID" />
</denyQueryStringSequences>
Seems IIS is denying something in the query string. We removed the whole section as was not needed.
http://www.iis.net/configreference/system.webserver/security/requestfiltering/denyquerystringsequences
Thanks to a colleague who spotted this; I would've never of thought to check the web.config for something like this.

Different Color Text of Topic Titles by Child Project in Search Results List

Does anyone know how I can change the text color to indicate the source project of a topic as displayed in the Search Results list?
I have followed Peter Grainge's directions for setting up a parent project that has several child projects, one of which contains outdated version-specific information. Thanks, Peter!
I would like it to be obvious to the user before they open a topic from the Search Results list that it is from the old legacy project.
I have found where the font is set, (thanks to the RoboWizard), but I am not a Javascript programmer and am uncertain how to code the "if document is from this project, then use this font" logic.
I would also like to put a "caption" below the "Search Results per page" line to explain the purpose of the color change.
I am using RoboHelp HTML 8.0.2. I generate WebHelp output which is then FTP'd to our server.
Thanks in advance!

Hi Leon,
     Let me make sure that I understand your suggestion - I should change the title of each topic in the "legacy" knowledge base so that they each include a short identifier, such as "First Topic - Legacy"? If so, I suppose that would work, but I'd have to change 1,000 topics. The topic titles would no longer match the filenames (I'm trying to freeze changes to the old knowledge base to which there are many links from our user forum), which I suppose is not a big concern at this point. I'll run some tests.
     That has also raised another question in my mind, but I'll post that separately. It's about the way Robohelp selects the text that is shown immediately after the title of the topic in the Search Results list.
     Thanks for taking the time to help!

Managed custom properties at site collection level when used as refiner returns no value in search result web part

I have created certain crawled properties and mapped them to the OOB managed properties( refineable active ) in search schema at site collection level and tried to use them as refiner in the search
site at farm level but it returns no value.
But when i use the same crawled property and map it to a service level OOB metadata property ( refineable active ) and use it in search as refiner it returns result , Can you help as to why this difference is there.
What steps should i do so that site level refiners also work in the enterprise search
Thanks in advance

Hi Dextar,
According to your description, my understanding is that you want to create a site level refiner in SharePoint 2013.
Here is a detailed blog you can refer to:
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/11/how-to-add-refiners-to-your-search-results-page-for-sharepoint-2013.aspx
Be aware that any changes in the manage property required full crawl.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Document Set name as refiner in Search results?

I'm wondering if there is a way to use the document set name as a refiner in a search results page so a user can search a specific site or document library and choose the document set name to narrow the results? Initially I thought I could create a
shared column on the document set (in the properties of the document set type itself) which looked up or calculated the document set name and then this would be shared with the documents within the set. I couldn't find a way to get the name of the set.
What would be the best way (if any), of getting the search results or document properties themselves (if I created a column which contained the document set name for e.g.) to show the document set (if populated) that the document belongs to?
Document Library
Document 1
Document 2
Document Set A
     Document A1
     Document A2
Document Set B
     Document B1
How can I get search results to show a refiner on Document A1 and A2 indicating they're in the same Document Set A? I realise I need crawled/managed property but how best should I set this up?
If this is not possible can anyone suggest an alternative please?
Many thanks!
Scott

Hi,
I am afraid that there is no existing managed properties on the document which we can count on to know which document sets the document belongs to. Just like what you said "created a column which contained the document set name", this could
be a workaround to achieve what you want.
To do that:
1. Add a new site column named DocumentSetName and add it to
DocumentSet Content Type. And give value "DocumentSet_A" for document set A and "DocumentSet_B" for document set B.
2. In the Document Set settings, enable the newly added column as
Shared Columns. It means that all documents added to this document set will share the column and its value.
3. Reindex this document library.
4. In the Search Results refiner, add the automatically created Managed Property
as Refiner.
With this method, you can filter the documents with the name of document sets when searching office documents in search center. The only information you need input manually is Value of the site column.
http://blogs.technet.com/b/sharepoint_made_easy/archive/2013/03/19/step-by-step-configuration-to-add-custom-refiners-in-the-refinement-panel-of-search-results-page-for-sharepoint-online.aspx
Moreover, if you have the requirement to create batch of DocumentSets without any manual input, you can refer to the following link which explain how to create them with proper settings and default values.
http://www.c-sharpcorner.com/Blogs/12139/how-to-create-document-set-using-csom-in-sharepoint-2013.aspx
Miles LI TechNet Community Support

Different Files Returned when using the Drop Down list on the Search Results Page

Hi
I have a result set of 22 documents when I select Date (Newest) from the drop down on the search results page. The third document down is called "LL".
If I now select Date (Oldest) I have a result Set of 22 documents. However, when I move to the second page. The number of documents has reduced to 20 documents and my document "LL" which I would have expected to be the third from bottom document
is not there.
Am I doing something wrong here ? Search is OOTB. I have added some refiner columns.
Regards
Nigel
Nigel Price NJPEnterprises

Hi Nigel,
It is by design. The "About x results" is presented when the total number of results is uncertain, and that is when collapsing (i.e. duplicate detection in this case) is enabled and the result set is partially processed. By default, a result page
shows 10 results at the time. Therefore, for result sets with less than or equal to 10 results you will always get an accurate number of results and hence “About” is omitted. For more than 10 results you will get the “About x results” on the first page until
you get to the last page of results and only then we know the exact number of results and hence can omit the “About”.
Note that when you page out in the result set you will notice that the X in the “About X results” can vary quite a lot. That is because the total number of results is estimated based on the collapsing done so far. This is a common way of doing it by other
search engines as well.
Here is a simlar post for your reference:
http://spbreed.wordpress.com/2013/09/14/sharepoint-2013-solution-to-inconsistent-search-results-count/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How to display search results in a table or in different columns

Hi
How can i display search results in multiple columns or in a table so that the user can sort the results based on a particular property displayed in the search results.
Thanks in advance
Regards,
Vidya

Hello,
To display search results in a table, in different columns or more... you should modify SearchResultLayoutSet.
Create your own StandardSearchResultRenderer (exp My_StandardSearchResultRenderer) and add to SearchResultLayoutSet. Than change whatever you like to achive your aim.
Thank you.
Hope this helps.

Different YouTube Search Results - iPhone vs Mac Laptop

Hi,
I was searching for the musci video by Asia, Only Time Will Tell and got lots of correct results on the Mac laptop using Safari but did not get any correct hits using YouTube search on the iPhone. Is there a reason why the search results would be different?
D

Youtube on the iPhone can only display videos that have been reformatted for it, and since not all videos have been you will get some different results than when you search on your laptop. Hope that helps =]

When I type in an entire address, I get search results page. how can I set the browser to find the actual address.

Is there a way to set the browser to go directly to the address I typed in, instead of providing search results and options for spelling and extensions?

You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

If same file name but file types are different, we should get only particular file type in search results.

Hi Team,
If filename is same for .doc and .pdf, only .pdf file should come in search results. For example, Attendee.doc, Attendee.pdf are available, we should get only .pdf in the search
results.
Please help us on this how to achieve.
Thanks,
Manjeera

Hi Manjeera,
I think you should use KQL / Managed properties, refer these links for more information -
use Property restriction queries in KQL and set filetype:pdf
http://msdn.microsoft.com/en-us/library/ee558911.aspx
http://msdn.microsoft.com/en-us/library/office/ff394509(v=office.14).aspx
http://technet.microsoft.com/en-us/library/jj219630.aspx
http://blogs.msdn.com/b/nadeemis/archive/2012/08/24/sharepoint-2013-search-rest-api.aspx
and these links -
Configure result sources for search in SharePoint Server 2013
http://technet.microsoft.com/en-us/library/jj683115.aspx
How To Customize SharePoint 2013 Search Results Using Query Rules and Result Sources
http://blogs.technet.com/b/mspfe/archive/2013/02/01/how-query-rules-and-result-sources-can-be-used-to-customize-search-results.aspx
Hope this helps!
MCITP: SharePoint 2010 Administrator
MCTS - MOSS 2007 Configuring, .NET 2.0
| SharePoint Architect | Evangelist |
http://www.sharepointdeveloper.in/
http://ramakrishnaraja.blogspot.com/

Refiner TEst is different on ACtual Search Results

Similar Messages

Maybe you are looking for