Reflecting cube in query designer

hi
can any body tell me that i have created one cube and that cube which i have created that i want should also reflect in my query designer how should i make it reflect in query designer
regards
gurkiran

Hi,
For creation of query on cube please follow the following path
Start -> all Programs -> Business expolrer -> Query Designer
it will ask for Login.
after login query-> new -> find your cube and create report and save it.
Regards,
Ganesh

Similar Messages

  • Number of records in cube from Query Designer

    I don't have access to the cube in BW(listschema). I only have access to pull reports from cube from Query Designer. How can I tell the total number of records in a cube?
    Thanks.

    Hi
    you can use the tech content in the query designer to display the count for no of records or you can do the same via creating a new CKF
    or see the below link to display the count
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a

  • Doubt in Query designer

    Hi all:
    I have a doubt in Query ...
    I have an infocube for GR quantities and other infocube for confimation quantities.
    In a multiprovider,i collect this two cubes.In query designer,if i given GR date as i/p,
    confirmation quantities doesnt display.IF i didnt give GR date as i/p,then both GR and Confimation
    quantities display in seperate line.In that case if i see the confirmation quantitis column,GR quantity is
    and same for GR quanitiy.
    Waiting for your inputs.
    Rgds
    MSK

    MSK,
    These two pieces of information are at different levels. GR Date is mapped only to the GR quantities cube and no mapped to the confirmation quantities cube.
    Map GR date in the multi-provider to a date in the confirmation quantities cube.
    Aneesh

  • Cube don't apper in the Query designer

    Hi all I have created one cube and i don't see that one in my query designer..am I missing something here...pls let me know..cube is active,,update rule is active also.
    thanks

    Hi Gandaki,
    You will not see the Cube in Open> Queries until you have created an query on this cube. In the Open dialog box, click on the New button and look for your cube in the InfoAreas.
    Hope this helps...

  • Bex Query Designer running against a Cognos Cube

    Hi
    Is it possible to run Bex Query Designer against a Cognos cube ? I know you can do it the other way around - run Cognos against a BW cube. But I can't find anything on creating Bex Query on a Cognos cube. 
    John

    Hi John,
    I think that's not possible. I've never seen that, there is no information about it anywhere.
    But, why would you like to connect BEx to another tool? As you said, you can connect Cognos to BW (as well as Microstrategy, Business Objects and ohters). And this is because all these tools are better in front end desing (even after BI7, i think BEx reporting tools are awful).
    Regards,
    Diego

  • SSRS Column Chart Design Returning values in a format different from SSRS -SSAS Query Designer

    Hi All,
    I have an SSAS cube Measure Group with Multiple Measures that I am attempting to return on one SSRS report and reflect the 
    values using a ssrs column chart.
    My Measure Group (Patients).
    Measures:
    PatientsOnMeds
    PatientOnRelapse
    PatientsCounseld
    TotalNumberOfPatientsRegisterd
    NewlyRegisteredPatients
    HealthPersonelTrainef
    Demension:
    Time (Year) :filtered to 2012 & 2013
    In my SSRS query designer I have filtered the above Measures with Time Dimesion year 2012 & 2013
    and the data is returned as :
    Year |PatientsOnMeds|PatientOnRelapse|TotalNumberOfPatientsRegisterd|NewlyRegisteredPatients|
    2012 | 700          | 526            |  25                          | 456
    2013 | 245          | 245            |  15                          | 70
    Now the problem is when I return this data on the column Chart it's in messed up mesh
    On the chart Data:
    -Values :Measures
    -Series Group: Dimension
    The report values are returned in multiple columns for each value segmented by year i.e year 2012,Year 2013.
    I want a single column for each Measure (value) for each single year and The chart axis to reflect the measures(values) 
    instead of grouping values according to series group.
    instead the legend returns:
    -Year A -PatientsOnMeds
    -Year A -PatientOnRelapse
    -Year B -PatientsOnMeds
    -Year B -PatientOnRelapse
    I would like the legend to reflect on -Year A,Year B in color code that will be highlighted in the column values.
    Please point me in the right course if you can.Your insights are highly appreciated.Thank you in advance.

    Hi Charlie, 
    Thank you for your kind response. 
    In actual I want the legend to show:
    -2012
    -2013
    And the bottom axis to show:
    PatientsOnMeds
    PatientOnRelapse
    PatientsCounseld
    TotalNumberOfPatientsRegisterd
    NewlyRegisteredPatients
    HealthPersonelTrained
    Indicating in color code for Year 2012 and Year 2013.
    This the challenge that I am struggling with.I hope you understand my scenario.
    It aint easy.

  • Value for a characteristic changed with an other value in Query Design

    I want to change the value for a characteristic (Type) in Query Design (not the description, the value).
    In my cube I have these values:
    Customer *** Type
    22222********SmallCorp
    22223********SmallCorp
    22224********MedCorp
    The report should like:
    Customer *** Type
    22222********LEGALENTITIES
    22223********LEGALENTITIES
    22224********LEGALENTITIES
    Or only the "SmallCorp" value should be changed in LEGALENTITIES.
    How to do that?
    Thanks,
    Dragos

    You can write an exit to replace Type SmallCorp to LEGALENTITIES.
    But this will reflect in other queries too....
    Or If change in modelling is still an option, you can add one more Type 2 in the cube and update in the transformation with Constant =  LEGALENTITIES. Use the Type 2 in the queries.

  • Not able to enter data in query designer

    hi
    can any one help, i created a input ready query on multi provider contain both standered and real time cube, here real time cube not contain any data.
    when i created layout by taking 2 chracteristics and 2 key figures from real time cube it give me like " no data available".
    what i have to do here to enter data to realtime cube key figure

    First check if you have created aggregate level.
    Second check the loading behavior setting on the Realtime infocube- it must be set to "Real- Time Data Target can be planned, data loading not allowed’'.
    Third, query must be also input ready- in other words set the Selections (key figures) to input ready in Query designer.
    Finaly, when you open context menu over the query, Bex Analyzer' Analysis grid, you can check the input ready settings for every cell if you want. If you did all steps, mentioned in the text above, input ready check box will be automatically checked for every cell of input enabled keyfigures...
    Alex.

  • How to create a variable in Bex Query Designer

    Hi guys,
    I am writing a query for a travel management report using the SAP Standard cube. I would like to restrict the query so it only shows me the last two months excluding the current month. I have checked BI content in RSA1, but I canu2019t find a relevant SAP standard variable that I can use.
    Can anyone please tell me if I can create my own? And if so, how I can do this.
    Many Thanks
    Forhad.

    lets say u want to display following picture:
    sept$-----august$
    City
    -chicago123$--
    44$
    so in Query designer go to Default values section.
    Bring in Calendar month
    right click calendar month
    and hit Restrict
    now select variable
    use standard sap variable Current Month.
    hit okey
    now select Variable and hit Red button
    Result u restricted current month.
    in columns bring in keyfigure $
    right click and hit edit
    bring in time field calendar month
    right click and hit restrict
    bring in Current month
    right click and select - SET OFFSET FOR VARIABLE
    select -1
    hit okey
    repeat the above process
    and this time select offset = -2
    this way u restricted current month
    but displayed last 2 months for keyfigure values.

  • Query disable status in bex query designer

    hi all,
    when i opened query in query designer for PA_PA cube it is in disabled mode.iam unabled to restrict or do any changes.and giving error like "the dependent objects are in different transport orders."i installed this particular queries in BI content also.please help me in this issue.
    Regards
    Vamshi D Krishna

    Hi Vamshi,
    go to rsa1 - transport connection and select  ur query and drag & drop into third screen
    u can see the locked request no. of ur query ..
    u can take that no. and go to se03 -- give that request no. & execute unlock..
    now, again come back to ur transport connection, now u can see under ur query no transport request has been assigned.. select the truck symbol..
    It will ask u for the new request no. assign a new request no. of urs and check the query at the designer level. u can able to change the query ..
    Hope it helps.
    If u have any doubt reply to this message.
    Thanks & Regards,
    V. Vijay Kumar.

  • Bex Query designing issue

    Hi,
    Need help for the following scenerio,
    There is data for Year (Numc..2010 we can do this by offset because it is Numc) and Year Quarter(Char..2010 Q1But this char..I think not possible) fields in the cube.But report requirement is last 3 recent Quarters data and previous 6 years of data into report.
    FYI..PFA screen,
    For ex:
    2006
    2007
    2008
    2009
    2010
    2011
    2012 Q1
    2012 Q2
    2012 Q3
    2012 Q4
    2013 Q1
    2013 Q2
    2013 Q3
    2013 Q4
    2014 Q1
    2014 Q2
    2014 Q3
    2014 Q4
    Appreciate your help.
    Thanks,
    Ram

    Dear Ravi,
    Could you please check the behaviour in TX RSRT.
    This could be bug, also check if the below notes are helpful.
    1259625    Query Designer: Texts are not updated or missing
    1246021    Structure member texts are not displayed
    1229140    Column headers not displayed
    1279430    Structure member texts are not displayed
    Regards,
    Arvind

  • Error while executing query in query designer and RSRT.

    Hello All,
    At none of the places (BI--> RSRT  or via query designer GUI) my query is executing properly .
    At RSRT the error message ---
    At Bex Query designer the error msg--
    Checked the data at the sales-infocube level , the data is absolutely ok.
    Regards
    Deblina

    Hi,
    Have checked both the places, backend cube as well as the filter conditions of the query ,everything is in sync.
    to make the query more simple i have removed the charateristics restrictions then ran the query , but still getting the same error.
    Am just attaching the screenshot of the query layout, for your reference.
    Regarding connectivity to access the portal,  how it can be established.
    Many Thanks
    Regards
    Deblina.

  • Query Designer : change in charactristic

    Hi Experts,
    I have changed long text and short text of one charactristic but it is not reflecting the new name in reports.when i checked it in query designer on the left hand side under Dimensions it is showing me the new name but in Free charactristics it is still displaying old name and so in reports. Is there any solution to this?
    Thanks in advance.

    Hi,
    Thanks you so much for quick replies. The thing is the charactristic was already there in reports. Now i canged the long text in the infoobject and  activated it. but in query designer under free charactristics, it is not changed. i tried to regenerate query from RSRT but not helping. I think as Dirk mentioned it is not getting changed at this level automatically , but do i need to change this char in every report where it is used manually? there is no any other solution?
    Edited by: soniya on Nov 19, 2008 1:07 PM

  • Query Designer in BI - How to cumulate value and get the Max and Min value.

    I want to create a report with  query designe of BI 7r. is it possible. the data from the cube will be
    Year ,           Exposed Quantity
    1999 ,             200
    2000 ,            100
    2001 ,            -100
    2002 ,             300
    2003 ,           - 200
    2004 ,             100
    2005 ,            -200
    Calculation should be - Refer the cumulative value field
    Year  ,          Exposure Quantity ,   Cumulative value
    1999  ,            200   ,                             200
    2000  ,            100  ,                              300
    2001  ,           -100 ,                               200
    2002  ,            300  ,                              500
    2003  ,          - 200  ,                              300
    2004  ,            100  ,                              400
    2005  ,           -200  ,                              -200
    An the out put of the report  should be Max value ie 500 and Min Value -200.
    My question is that is it possible to do in the front end ie in the Query Designer (BI 7) If so how.
    Edited by: Parakadavil Chacko Mathew on Oct 8, 2009 3:52 AM

    Hi there,
    Create 4 column,
    1st will show regular values for the key figure,
    2nd will show Cumulative value, in Query Designer, Just right click on the this 2nd key figure properties, calculation tab there you can check on Cumulated option, and define the calculation direction as Calculate along the Column.
    3rd will show Minimum value , Just right click on the this 2nd key figure properties, calculation tab calculate single valuea as minimum.
    4th will show Minimum value , Just right click on the this 2nd key figure properties, calculation tab calculate single valuea as Maximum.
    Regards,
    Rajdeep Rane.

  • Query Designer not working with Aggregation Levels on BW 7.30

    Hi,
    Every time I try to create a query on top of an Aggregation Level that I created with the new ABAP based RSPLAN transaction.
    If somebody can help me out I'd appreciate it.
    By the way, we don't have the Java stack, but we are currently using BO4's JVM as we're on ramp up.
    This is the error that I get when trying to create the query:
    QD Revision 667
    ERROR ID: E-ONGUIUNHANDLEDEXCEPTION
    And this is the error log:
    1:42:13 p.m..319: Info: Query Designer Start. Revision: 667
    QDbCommandBase::Execute  - Standard View
    QDbCommandBase::Execute  - Table View
    QDbCommandBase::Execute  - Rows/Columns
    QDbCommandBase::Execute  - Cells
    QDbCommandBase::Execute  - Conditions
    QDbCommandBase::Execute  - Exceptions
    QDbCommandBase::Execute  - InfoProvider
    QDbCommandBase::Execute  - Filter
    QDbCommandBase::Execute  - Documents
    QDbCommandBase::Execute  - Where-Used List
    QDbCommandBase::Execute  - Properties
    QDbCommandBase::Execute  - Properties
    QDbCommandBase::Execute  - Messages
    QDbCommandManager::ItemClickedHandler - Bar clicked: NewQuery
    QDbCommandBase::Execute  - New...
    QDbCommandBase::Execute  - Table View
    QDbCommandBase::Execute  - Rows/Columns
    QDbCommandBase::Execute  - Cells
    QDbCommandBase::Execute  - Conditions
    QDbCommandBase::Execute  - Exceptions
    QDbCommandBase::Execute  - InfoProvider
    QDbCommandBase::Execute  - Filter
    QDbCommandBase::Execute  - Documents
    QDbCommandBase::Execute  - Where-Used List
    QDbCommandBase::Execute  - Messages
    QDbCommandBase::Execute  - Table View
    QDbCommandBase::Execute  - Cells
    QDbCommandBase::Execute  - Conditions
    QDbCommandBase::Execute  - Exceptions
    QDbCommandBase::Execute  - Rows/Columns
    QDbCommandBase::Execute  - Filter
    QDbCommandBase::Execute  - InfoProvider
    QDbCommandBase::Execute  - Properties
    -EXCEPTION-START- 1:42:52 p.m..416: TRACE EXCEPTION  ---
    Exception Name: TargetInvocationException
    Exception Message: Exception has been thrown by the target of an invocation.
    Exception    at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
       at com.sap.bi.et.QueryDesigner.QDpPropertyBase.PropertyGet(Object iPropertySource, String iPropertyName)
       at com.sap.bi.et.QueryDesigner.QDpPropertyBase.ValueGetDefault(Object iPropertySource)
       at com.sap.bi.et.QueryDesigner.QDpPropertyBase.pValueDefault()
       at com.sap.bi.et.QueryDesigner.QDpPropertyBase.ValueDefault()
       at com.sap.bi.et.QueryDesigner.QDpPropertyBase.ValueResolved()
       at com.sap.bi.et.QueryDesigner.QDpPropertyMulti.SetFirstProperty(QDpPropertyBase iProperty)
       at com.sap.bi.et.QueryDesigner.QDpPropertyMulti.Add(QDpPropertyBase iProperty)
       at com.sap.bi.et.QueryDesigner.QDuPropPageQuery.ToDialog()
       at com.sap.bi.et.QueryDesigner.QDuPropPageBase.ToDialogCore()
       at com.sap.bi.et.QueryDesigner.QDuPropPageBase.set_CommandContext(QDbCommandContext Value)
       at com.sap.bi.et.QueryDesigner.QDuPropPages.EnablePage()
       at com.sap.bi.et.QueryDesigner.QDuPropPages.ContextChangedHandler(Object iSender, QDbCommandContext iCommandContext)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.ContextChangedEventHandler.Invoke(Object iSender, QDbCommandContext iCommandContext)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.OnContextChanged(QDbCommandContext iCommandContext)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.CalculateContext(QDcView iViews, QDeAreaType iAreaType)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.CalculateContext(QDbElement iElement)
       at com.sap.bi.et.QueryDesigner.QDbCommandPropertiesQuery.ExecuteCommand()
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommand(QDbCommandBase iCommand)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
       at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
       at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       at System.Windows.Forms.Control.WndProcException(Exception e)
       at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    -EXCEPTION-END----
    -CALLING-FROM- 1:42:52 p.m..416: TRACE EXCEPTION  ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       at System.Windows.Forms.Control.WndProcException(Exception e)
       at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()

    Hi,
    it seems that you are already using the most recent query designer version. Is your SAPGUI also the most recent version? If yes, open a OSS ticket. If not reinstall the SAPGUI and the BEx tools. I am also working with this query desinger version and I don't have this kind of problem.
    Regards,
    Gregor

Maybe you are looking for