Reflection disappears on some slides

Hi!
I've been doing some presentations today and chose Reflection as the transition mode. On exporting them to QuickTime I have noticed that the left hand side reflection isn't present. Is there any reason and/or way to fix this?
Thanks in advance

Exported to quicktime, transitions do not work when going backwards. Only if presented in Keynote itself.

Similar Messages

Lately I've been importing photos from my iPhone and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens

Lately I've been importing photos from my iPhone to iPhoto and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens and I'm wondering if it's because I have a 5-year old Mac book or iPhoto is having issues. I'm not happy with disappearing photos especially after I've deleted them from my iphone after importing them to my macbook.
Has anyone experienced similar difficulties and what can I do?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Why do some slides not play in preview? Yet...

I have a presentation put together over several versions of Keynote (within the past year). I was adding some slides and found that the new slides did not play when I previewed the presentation full screen, but they do appear correctly when I export the whole thing to Quicktime. Has anyone noticed this happening?
Thanks.

Thanks for the heads up. I'll see if I still have the old version, though I think i deleted it.
It would be gracious of Apple to advise its loyal users that they (Apple) have broken a program in terms of legacy files. So we don't waste our time using the "improved" version. A simple advisory like "Don't use this on earlier files."
Thanka again.

E1000 Router Wireless signal will disappear after some time

Hi,
I have set up the E1000 this week, i found that the wireless signal would disappear after some time if the wireless connection is not in use.
For example, on my iphone
1. I search for the wireless signal and successfully got the IP
2. after using for some time, i put the iphone aside
3. when i want to use the wireless again, the iphone is not yet connected to the wireless
4. i would then need to search for the wireless signal and connect again.
This causes problems because i am using some VPN connection at my laptop and it would disconnect it.
Is there any config that would keep the wireless signal ?
Thanks!

Try changing the wireless channel on the router.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
See if that helps you.

Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

I have tried much of the same - still no joy.
I also reported it as a bug to Apple although the response page said "we can't reply to messages"
For now I have had to turn off auto syncing and keep plugging and unplugging until the device is recognised correctly - about 1 in 10.
In my email to apple I also listed the contents of the xml file that keeps track of the devices that iTunes has seen:
When seen as an ipad:
<dict>
<key>Connected</key>
<date>2010-06-08T21:33:57Z</date>
<key>Device Class</key>
<string>iPad</string>
<key>Family ID</key>
<integer>10006</integer>
<key>Firmware Version</key>
<integer>256</integer>
<key>Firmware Version String</key>
<string>3.2</string>
<key>ID</key>
<string>8F98884620E0F9FF</string>
<key>Serial Number</key>
<string>V5020116Z39</string>
<key>Updater Family ID</key>
<integer>10006</integer>
<key>Use Count</key>
<integer>21</integer>
</dict>
When seen as an iPhone:
<dict>
<key>Connected</key>
<date>2010-06-08T21:39:07Z</date>
<key>Device Class</key>
<string>iPhone</string>
<key>Family ID</key>
<integer>10006</integer>
<key>Firmware Version</key>
<integer>256</integer>
<key>Firmware Version String</key>
<string>3.2</string>
<key>ID</key>
<string>8F98884620E0F9FF</string>
<key>Serial Number</key>
<string>V5020116Z39</string>
<key>Updater Family ID</key>
<integer>10006</integer>
<key>Use Count</key>
<integer>22</integer>
</dict>
You will see from the Use Count that these are adjacent connections, ie plugged in as ipad then as iphone. Apart from the device class, everything else is the same.

Captivate 6 publish to mp4 has lines & choppy screens on some slides?

Choppy/garbled lines show up in some slides... cant' figure out how to get rid of them. Happens on multiple files.
Details:
Captivate 6
Output: mp4
type: demo
Things I've tried:
I have removed any video slides (that seems to be some of when it occurs but not always)
I have updated to 6.0.1.24
i have cleared my file cache
I have changed the location of my working file, my cache & my publish to files to all be on my local drive (had to get an override of admin rights to do this)
I have attempted taking a "snapshot" of the background and creating a brand new slide when the problem occurrs... this works sometimes only.
Here's a screenshot of the mess on my screen... it moves and flashes.
Thanks in advance for any help.
-Tanya

Thanks ... I'm trying these things sequentially to see if anything helps.
Yes, you're correct, it's a captured demo simulation.
First, changed the slides in question to be Optimized slide quality, published - no luck.
Then, I unchecked the compression options in preferences and published again - no luck.
Lastly, I checked "force republish" and republished - no luck.
It's odd, they have no moving parts, no extra's... nothing special. And they will not publish correctly for anything.
I'm not exactly sure what FMR stands for (I've looked all over) but it appears to be something with video slides. I've actually removed all of those and replaced with short screen shots successioned to look like movement as I have seen that cause problems with some application captures also.
Any other thoughts would be very appreciated.

How to add a sound on some slides?

How to add a sound on some slides? Not only one slide and not all the slideshow?
Is it possible? It must be!

Keynote is not Powerpoint and vice versa. The way music is currently handled in Keynote has been explained. If you wish music to play across only a few contiguous slides, you make them a seperate file and hyperlink to them using an object for the hyperlink.
Once built, and properly used, the transition from one set of slides to the next set is smooth and the audience will not know (or care) if there is one, two or fifty hyperlinked files behind the curtain. What they see is the content, the message and the effective use of a visuals to backup your actual live presentation. The files you create are not the presentation, you and all you bring to the audience are the presentation. You are simply using a tool to assist youself to help your audience better understand your message.
Using Keynote is found by many presenters to be an easier application to use. If you find Powerpoint easier, by all means use it. Your message will be basically the same to your audience, if done properly.
Feedback is a good way to ask for changes but given the rate of change, learning those few simple workarounds and using them effectively will help you use Keynote (or Powerpoint - yes there are limitations there too) to easily put your point across. Your audience will sense your frustrations as a distraction so it is better to accept the few limitations and make your presentation shine in spite of them.
Good luck.

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

CP4: Audio on some slides cutting out early

I have some slides where the audio stops a fraction of a second or so too early. That may not sound so bad, but it sends a signal I'm either a bad sound editor or don't know how to speak. How do you suppose I could address this? Add a second or so silent tail to each faulty clip? I recorded these files as .wavs using XP's Sound Recorder and imported them into Captivate, which has always worked dandy for me. What's even more strange is only some slides are affected.

Dan,
I came up with a goofy yet effective fix to this issue. While Cp4, the moody little monster it is, will let you continually add silence to the end of an audio clip for a few minutes at best, I can do the following until the cows come home:
Double-click the audio clip from the timeline, or open it up however you prefer.
Insert your playhead at the end of the clip.
Ensure your microphone is plugged in.
Click the Record button to add some ambient noise. A second or two should do the trick.
Highlight the sound you just recorded, not the entire waveform.
Click Adjust Volume.
Reduce the volume on this portion of the clip to 10% repeatedly until there is no sound at all.
Click OK.
Just as good as Insert Silence, but a bit more labor intensive.
Goofy junk like this makes me glad my shop just ordered some Cp 5.5 licenses.

A white space (bar, border, stripe) appears to right of the play window. Some slides only.

A white space (bar, border, stripe) appears in the rightside of the play window. Some slides only so it appears to flash. It shows up in the preview as well as SWF output, but not in the design mode/window. The space varies in width up to ~.2 in. wide and as tall as slide. It is beyond the play/control bar but on top of the thick border I've added. The previous two projects didn't do this.
Captivate 6
Resolution: 800x600
Win7
SWF Quality: retain Slide Quality Setting; Advanced Prj Compression; Compress SWF file.
See image below:

The project quality settings checked are:
Custom:
     Retain Slide Quality Setting;
     Jpeg 80%
     Advanced Prj Compression;
     Compress SWF file.
Video Color Mode is 16 bit
The Quality property for all the slides is 'Low (8-bit).

Background colours disappear when question slide added in C4

I recently updgraded to Captivate 4. Since the upgrade I have encountered this problem. I am importing slides from power point. Some of the slides have a blue background. When I add a question slide in C4, the blue background does not show up when I Preview in web browser or Publish the file. The blue background is still there if I don't add any question slides. Any ideas on what is going on and how to prevent my blue backgrounds from disappearing?

Sorry... I was in the process of doing it yesterday, but here's what I did.
I have two versions of Captivate in my laptop, Captivate 3 & 5.
1. I opened Captivate 3 and started a project
2. Create a question pool in Captivate 3
3. I inserted a powerpoint slide with my gif animation in the slide
NOTE: If you want your gif to loop continuously, you must make sure you pause the project in Captivate before the end of the slide. It will not work if you extend the slide duration.
4. After importing the ppt slide with looping gif animation in captivate 3, I copied the slide (make sure you're not copying the invisible click box) and pasted it on top of each question in the pool.
5. Go to your timeline and send the slide to the background if necessary.
6. Line up/design your question slides.
7. Save and close the project.
8. Find the project and open with > Captivate 5
Your question pool should retain the animation.
I am working on creating a "Who Wants to be a Millionaire" game. I've seen it done before, but it always looks amateur. I wanted to do something more polished, with nicer graphics, appropriate sound effects and good transition slides. The gif animation is of two moving spotlights on the background of every question screen. I'd be happy to share a sample if I knew where to upload it to.

Lines disappearing on Master Slide (Bug or User error?)

Hi all -
I'm using the "Magic Move" feature on one of the Master slides from a theme called "Blueprint". When I use Magic Move some of the "permanent" lines from the master slide disappear during the move and then reappear when the move is finished. Any suggestions for solving this problems would be greatly appreciated.

Thanks Ken -
I moved my presentation to several other themes, but the problem seems to extend to those Master Slides as well. All of my elements (photos, text, etc.) come through the transitions just fine, but some of the lines on the Master Slide itself disappear while the transition takes place. It makes the whole thing pointless it the viewer can see this, and there's no way to change the master or stop this from happening. Hopefully Apple will take a look.

Word 2003 - Acrobat menus disappear for some (not all) documents

I have a user who is having a very bizarre issue with Word 2003 and Acrobat 9 Pro Extended. When he opens some Word documents, the PDF menus disappear. They are immediately restored when he closes the document or creates a new document. We've tried repairing and uninstalling/reinstalling to no avail. He uses several custom templates, but they are applied at startup to all documents. Any other troubleshooting ideas? Could the fact that he's using Word 2003 instead of 2007 be causing the problem?
Thanks

More information: I just checked the version of the file I had on my hard drive, and it's doing the same thing there. However, the other similar documents in the same folder on my hard drive are not behaving this way, so apparently it's not specifically
a SharePoint issue.
Scott
Scott Stocking

Project Online - Schedule PDP disappearing for some Project Owners and Project Server Administrators Group

Current Project Online environment is currently setup with Project Server Permissions Mode. All projects follow a customized workflow that enables Schedule PDP on Planning Phase/Stage, among other rules. For some users the workflow and
expected PDPs are working fine, but for other the Schedule PDP just disappears under unknown conditions, even if they are part of the Administrators Group. Has anyone come across these behaviour?
Saludos!

As you said they belongs to Admin group it means they have required permission still double check the permission assigned to the users.
Also ask those users to try to log in form different system then check is issue is occurring.
If this issue is occurring for few users then this may be because of Browser. check the following :
1. Open IE then internet options --> Security --> Trusted Site and add your PWA site. then check
2. If still issue is occurring then click on F12 button then select browser mode as IE 9 then check.
kirtesh

I created thirty pages using ipages and my web manager is having difficulty placing them on my website, some change color, some slide off the screen. Is there a place for problem solving for ipages and website?

Hi, I thoroughly enjoy the ipage program and prefer it to the similar one offered by Word. But my web manager is having countless difficulties. I converted everything to PDF's for him but several of the ipages are loading with a different backround color. He says he has to meta tag each page since this cannot happen automatically. On my Mac, the pages are loading after the navigation bar is selected, and it takes about three to four seconds. On my iphone, however, each page takes at least eight seconds to load and then it slides right off the screen before it can be read. I really want to continue using ipages to update my website but I am a rookie and do not understand why each ipage cannot simply open when someone goes to my website. It would be great to do away with the loading of each page and I would like to also minimize any of my margins. Thanks for any help on this strange matter. Mary

Converting pages to pdf is not the usual way make a website. You may want to try some other app where you can directly create the html which is the customary format for the web.

Reflection disappears on some slides

Similar Messages

Maybe you are looking for