Reformat Content Server Error

Sometimes we get an LDAP error. This causes UCM to display a content server error page to the user. It has the message that 'content server failed' and then some small detail. The page has a navigation bar on the left.
We would like to catch errors like this and format a nice error page that the user is not stunned with.
I thought about a custom component in the check credentials service that would do a redirect to our new web page but not sure this would work.
Any ideas would be a help.
Thanks

You could also build a component that contains a new error page template (with the same name as the original one and with a load order that'll make the content server show your custom template instead of the original one). You do not have to change any of the services for this to work and your end users will always see the same template whenever they get an error.

Similar Messages

Content Server error post installing webcenter sites

Hi ,
I installed webcenter sites and post installation after login when click on "Contributor" link getting Content Server error while Admin mode is working fine.
On further debug below URL was internally hit which is giving 500 error : http://<hostname>:<port>/cs/ContentServer?pagename=fatwire/ui/controller/controller&elementName=UI/Layout"
Any pointer to root cause?
Edited by: 975945 on Dec 11, 2012 5:16 AM

Drop the database user and reinstall again.

Content Server errors report HTTP 503

Hello,
I've noticed that upon any Content Server error (missing content, IdocScript error, etc), apache will report an HTTP 503 error, but still serve the page. Has anyone else seen this behavior, or know if it is configurable?
This behavior creates a problem because we publish our Site Studio websites with SSPU and it fails deployments on 503 errors.
Thanks for any advice,
-Jason

This is probably an error in the configuration of your content repository.
Check the setting for your Content Server at OAC0 again.
regards
Juan

Content Server Error: 407 Proxy Authorization Required

Hi Experts,
I am new to Content Server and have recently installed Content Server 6.40 with MaxDB 7.8 database on a Windows 2008 server.
The installation completed successfully and IIS server was configured as per guide. The Content server is running when checked through URL on server.
Next, we created a new repository with following details, but are facing "HTTP error: 407 Proxy Authorization Required" while testing the connection.
Settings in OAC0
Content Rep.    A1
Document Area: ArchiveLink
Storage type: HTTP Content Server
Version no.: 0046
HTTP server: <IP of Windows server where CS is intalled>
Port Number     1090
HTTP Script     ContentServer/ContentServer
Transfer drctry C:\temp
HTTP Port 1090 is open from SAP system(HP-UX) to Content Server(windows) and there is no firewall between the 2 servers, but we still see the error in OAC0 and CSADMIN. I also tried setting the security parameter to 0 in contentserver.ini file, but that didn't help either.
The content server was installed using administrator user.
Would appreciate your inputs on what am I missing?
Thanks.
Regards,
Varun

Hi Varun,
Please change Document Area: ArchiveLink .
Remove Archive link and change it to Document Management system ( DMS)
Check the results and post the output.
Regards,
Deepak Kori

DMS content server error

Hello SAP Experts!
I have following error when exeuting test program for checking content server RSCMST:
HTTP error: 500 Internal Server Error
It is appearing continuosly every day. Only solution I have found now is restaring Server when DMS is installed. Sometimes it takes 2 or 3 reboots to make it available back again.
Of course this is related with problems that people cannot check in documents on DMS server.
thanks for any suggestions!
Michal

hi.,
pls check..
Click Start, point to Programs, point to Administrative Tools, and then click Internet Information Services.
2. In the console tree, click Default Web Site. In the display pane, right-click Localstart.asp, and then click Properties.
3. On the File Security tab, click Edit under Anonymous access and authentication control.
4. On the Authentication Methods property page, click to clear Anonymous access.
or
restart the server.
award point if useful

Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Sap content server - error sending certificate - HTTPIO_PLG_NO_MPI_INIT

Hello all,
we have installed the SAP content server and created a new repository which has the status running.
Now when we go to OAC0 and the send certificate button, we get an error message:
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 HTTPIO_PLG_NO_MPI_INIT
Message no. CMS166
Why can I not send the certificate?
Thanks
Anne

What i mean is you need a user that has both local machine administration rights and local domain administration rights. This is due to the fact that it installs some web components that require domain admin. If you don't install with this, its likely you will be able to test connection fine but receive errors when trying to send the certificate. This issue cannot be resolved after the installation. i.e. if you install with the incorrect admin rights and then adjust these afterwards, it will still not work, and the only solution is to reinstall with the correct rights.

Content Server Error Handler

I have an Intranet site let's say www.xyz.com and it has restricted access. So before anyone gets to the site, they have to be authenticated.
If a users press "Esc" for authentication(cancells Authentication), then the Site Studio Error handler is not triggered, but it returns a content server message
"Content Server Request Failed
Node access denied "
How can I customize this? - basically to add a custom message.
Pleast take a look the screen shot:
http://i28.tinypic.com/2i115t.jpg
Thanks in Advance.

Use the ExtranetLook component.
Regards
Jakub

Content Server error

Hi All,
I am trying to write a Java utility that will create a document using Content Server HTTP API in a repository with security turned on. I use SAP SSF classes to calculate the secKey value for my request, but everytime I get HTTP 401 error and the Content server log contains following error:
Security SsfVerify failed rc=12, lasterror=18, decoding error for, PSE=
?\C:\Program Files\SAP\Content Server\Security\ZT1.pse,"
My algorithm is following: first I calculate the MD5 hash of the parameters:
byte[] digest = null;
MessageDigest md = MessageDigest.getInstance("MD5");
md.update(param.getBytes());
digest = md.digest();
Then I sign it using SAP SSF classes:
ByteArrayInputStream bais = new ByteArrayInputStream(digest);
// create object of ssf data
ISsfData data = null;
try {
    data = new SsfDataPKCS7(bais);
    KeyStore keystore = KeyStore.getInstance("PKCS12");
    keystore.load(new FileInputStream("c:\\work\\PKI\\CS_NW1.p12"), "pwd".toCharArray());
    SsfProfileKeyStore profile = new SsfProfileKeyStore(keystore, "cs_nw1", "pwd");
    boolean res = data.sign(profile);
    if (!res) {
        System.out.println("Creation of signature failed");
    } else {
     ByteArrayOutputStream baos = new ByteArrayOutputStream();
     data.writeTo(baos);
     result = Base64.encodeBase64URLSafeString(baos.toByteArray());
} catch (Exception e) {
   e.printStackTrace();
Is anyone here who has experience with the Content Server HTTP API in combination with digital signatures and could help me with my problem?
Many thanks in advance!
Best regards,
Tomas

Hi Tomas,
I tried to implement the interface with C# and got same error as you mentioned above (Security SsfVerify failed rc=12, lasterror=18, decoding error for).
I'm not sure if my problem comes from the certificate which I created using makecert.exe or if I did somethime wrong signing the URL. How did you create your certificate?
Maybe you can see a major fault in my code. I tried it that way:
byte
[] byteArray = File.ReadAllBytes(@"C:\_xbound_ocf\Development\Dev\Binaries\Release\ENUtxt.pdf");
string docId = Guid.NewGuid().ToString().Replace("-", "").ToUpper();
string expiration = DateTime.Now.Add(new TimeSpan(2, 0, 0)).ToString("yyyyMMddHHmmss");
string accessMode = "c";
string parameterToBeSigned = ReplaceCharacter(_ContRep.Text) + ReplaceCharacter(_CompID.Text) + ReplaceCharacter(docId) + ReplaceCharacter(_DocProt.Text) +
ReplaceCharacter(accessMode) + ReplaceCharacter(_AuthId.Text) + ReplaceCharacter(expiration);
string path = @"C:\_xbound_ocf\Development\Dev\ProcessDirector\ArchiveLinkTest\ArchiveLinkTest\certs\DSAWithSHA1\MyUserCert.pfx";
X509Certificate2 certificate = new X509Certificate2(path, "alba&1");
DSACryptoServiceProvider provider = ( DSACryptoServiceProvider)certificate.PrivateKey;
System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding();
ASCIIEncoding encoding2 = new System.Text.ASCIIEncoding();
byte[] data = encoding2.GetBytes(parameterToBeSigned);
SHA1Managed sha1 = new SHA1Managed();
byte[] hash = sha1.ComputeHash(data);
byte[] signed = provider.CreateSignature(hash);
string secKey = Convert.ToBase64String(signed);
string url = _URL.Text + "?create" +
     "&contRep=" + ReplaceCharacter(_ContRep.Text) +
      "&compId=" + ReplaceCharacter(_CompID.Text) +
      "&docId=" + ReplaceCharacter(docId) +
      "&pVersion=" + ReplaceCharacter(_Version.Text) +
      "&Content-Length=" + byteArray.Length.ToString() +
      "&docProt=" + ReplaceCharacter(_DocProt.Text) +
      "&accessMode=" + ReplaceCharacter(accessMode) +
      "&authId=" + ReplaceCharacter(_AuthId.Text) +
      "&expiration=" + ReplaceCharacter(expiration) +
      "&secKey=" + ReplaceCharacter(secKey);
ReplaceCharacter is a function which replaces the invalid characters for url.
Best regards
Anja

Content Server Error - While Restarting

Hii All;
When trying to restart the Content Server I am getting the following error :
Unable to alter the process .Unable to execute service method "alter process" ( System Error - Java Heap Space )
How do I solve this ?
Thanks
Raj

Detailed Error :
IdcAdmin: Event generated by user 'sysadmin' at host 'imagesrv.ismt.com'. Unable to alter the process. Unable to execute service method 'alterProcess'. (System Error: Java heap space) java.lang.OutOfMemoryError: Java heap space [ Details ]
An error has occurred. The stack trace below shows more information.
!$IdcAdmin: !csUserEventMessage,sysadmin,imagesrv.ismt.com!$!csAdminUnableToAlterProcess!csUnableToExecMethod,alterProcess!csSystemError,Java heap space!syExceptionType2,java.lang.OutOfMemoryError,Java heap space
intradoc.common.ServiceException: !csAdminUnableToAlterProcess!csUnableToExecMethod,alterProcess!csSystemError,Java heap space
     at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
     at intradoc.server.Service.buildServiceException(Service.java:1997)
     at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
     at intradoc.server.Service.createServiceException(Service.java:1986)
     at intradoc.server.Service.doCodeEx(Service.java:541)
     at intradoc.server.Service.doCode(Service.java:472)
     at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
     at intradoc.server.Service.doAction(Service.java:452)
     at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
     at intradoc.server.Service.doActions(Service.java:447)
     at intradoc.admin.AdminService.doActions(AdminService.java:168)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: java.lang.OutOfMemoryError: Java heap space

SAP Content Server error 405 Method Not Allowed

Hello Everyone
We have installed SAP Content server 04s with SAP DB 7.6 build on Solaris platform. We are trying to connect it through ECC. We have configured Apache web server on content server, and we are able to access it through http url.
On ECC we have defined repository OAC0 and when we click on CSADMIN to create repository its giving us u201C405 Method Not Allowedu201D allowed error. Even we tried to test this configuration with Report RSHTTP60  this is also giving us 405 errors.
We have tried lots of things to resolve this error but we didnu2019t get any fine solution, does any one come across to such kind of error while configuring Content server with R/3 or ECC?
We will appreciate any help asap,
Thanking you and waiting for reply,
Warm Regards
Sharmishtha

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

SAP Content Server error

Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
Thanks

Hi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
    AllowOverride none
    Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
    Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys   4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys   4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys     34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys     35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks

Content Server error TEST: CL_HTTP_CLIENT= CREATE failed

Hi,
I have installed Content managment server successfully. but
I m facing this error when I am trying to create a content repositry in OAC0
can any one help..???
Content Managment - windows 2008 r2
SAP - Solaris sparc10
Edited by: letzfriend on Jan 23, 2012 9:52 PM

Hello,
Can you check syntax on the line ? I think, it should be like
call method cl_http_client=>create_by_destination
Also, check the Authorization of the user, refer to below link
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c7c53bda5e31ebe10000000a42189b/content.htm
Thanks,
Arjun

Content server error in content check-in - URGENT

Unable to do filter 'collections.CollectionValidateCheckinData' for type 'postValidateCheckinData'. Unable to instantiate java class code for 'collections.CollectionValidateCheckinData' at location 'collections.CollectionValidateCheckinData' with default location at 'collections.CollectionValidateCheckinData'. java.lang.ClassNotFoundException: collections.CollectionValidateCheckinData [ Details ]
An error has occurred. The stack trace below shows more information.
!$awappp54: !csUserEventMessage,AZLIFEM\\azl6u3d,inetucm.azlifem.azl.pvt!$!apFilterInstantiationError,collections.CollectionValidateCheckinData,postValidateCheckinData!apUnableToInstantiateClass,collections.CollectionValidateCheckinData,collections.CollectionValidateCheckinData,collections.CollectionValidateCheckinData!syExceptionType2,java.lang.ClassNotFoundException,collections.CollectionValidateCheckinData
intradoc.common.ServiceException: !apFilterInstantiationError,collections.CollectionValidateCheckinData,postValidateCheckinData!apUnableToInstantiateClass,collections.CollectionValidateCheckinData,collections.CollectionValidateCheckinData,collections.CollectionValidateCheckinData
    at intradoc.shared.ComponentClassFactory.createClassInstance(ComponentClassFactory.java:161)
    at intradoc.shared.PluginFilters.filter(PluginFilters.java:70)
    at intradoc.server.DocServiceHandler.validateCheckinData(DocServiceHandler.java:1399)
    at sun.reflect.GeneratedMethodAccessor44.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:490)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
    at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
    at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
    at intradoc.server.Service.executeServiceEx(Service.java:3492)
    at intradoc.server.Service.executeService(Service.java:3476)
    at intradoc.server.Service.doSubService(Service.java:3465)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
    at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
    at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
    at intradoc.server.Service.doCodeEx(Service.java:507)
    at intradoc.server.Service.doCode(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
    at intradoc.server.Service.doAction(Service.java:452)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
    at intradoc.server.Service.doActions(Service.java:447)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
    at intradoc.server.Service.executeActions(Service.java:433)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
    at intradoc.server.Service.doRequest(Service.java:1707)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: java.lang.ClassNotFoundException: collections.CollectionValidateCheckinData
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at intradoc.shared.ComponentClassFactory.createClassInstance(ComponentClassFactory.java:148)
    ... 39 more

Is CollectionValidateCheckinData a custom filter you have created? If so, it looks like it is not on your classpath. Check the the classpath in the configuration page of UCM to see if it is there. If it isn't, make sure you add the classpath in the build definition of your component in the Component Wizard.
There are other things that could cause this but those are the easiest to check first.

Content Server Error - User not found in Identity Store

Hello,
I am trying to setup an external provider in Weblogic so that I can authenticate users via Oracle Access Manager / Oracle Internet Directory.
I have followed the documentation and created a new provider for my external Provider and called it OIDAuthenticator. I have made sure that the Control Flag is set to SUFFICIENT. Oracle Access Manager is installed and configured. It authenticates my logins and SSO works fine.
The problem is that when I try to create users in OID and then login to Webcenter, I get the following error:
WCS#2012.02.14.07.49.09 : User: tuser03 not found in identity store.
The strange thing is that I am successfully logged in with the correct groups after I click on the ok button on the error popup.
Any ideas???
Thanks,
Darren.

The error goes away if I add the user to the Embedded LDAP.
This looks like a problem with the Control Flag setting but I can't see what I've done wrong because I have checked the Control Flag has been set to SUFFICIENT for OIDAuthenticator and OIDAuthenticator providers.
Have I missed something?

Reformat Content Server Error

Similar Messages

Maybe you are looking for