Reformat my Lenovo IdeaPad U450P and lost screen indicators
How do i get those indicators back. for instance when i hit fn+arrow up a indicator on the screen would show that the brightness is increasing. thanks.
Solved!
Go to Solution.
U450p drivers and software are here:
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=209243
You should probably install most of those.
For the Radeon HD4330 graphics card you can find newer drivers on the ATI homepage
Similar Messages
-
Lenovo Ideapad U410: part of screen is white
I have a Lenovo Ideapad U410 and the left part of my screen is uniformly white after turning on the laptop. It's a rectangle about 1 inch long, from top of the screen to the bottom.
I got this suddenly pretty much a month after buying the laptop (it appeared suddenly and I didn't do anything to cause it), and then the area of the white rectangle got bigger after I mistakenly dropped my laptop yesterday.
Would buying a new screen and installing it fix this, or could the problems be more besides the screen?
And is this covered by limited warranty?
Thanks.Hi Dsav6,
As per your concern, I would suggest you to please re-install the graphics driver of your system from the below mentioned web link.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073650
Afterwards, please restart the system and check if the issue still persists then it needs a personal assistance and it will be covered under warranty.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Installation of Lenovo IdeaPad U450p M23L4GE
I finally received my new Lenovo IdeaPad U450p M23L4GE.
When I tried to install Archlinux the partitioning didn't work.
The output of Auto-Prepare is "Device '/boot :32:ext2:+ swap:256:swap /:*:ext3' is not valid"
When I try to partition my disk manually I can't find the proper diskname.
/dev/sda-d nor /dev/hda-d work.
The directory /dev contains the following files/directories:
console
full
ide/
ieee1394/
input/
kmem
kmsg
loop/
mapper/
md/
md0 -> md/0
mem
misc/
null
port
ptmx
pts/
pty/
random
rd/
root.old -> rd/0
scsi/
shm/
tty
urandom
usb/
vc/
vcc/
video1394/
zero
Any suggestions?
Last edited by smk (2010-09-19 20:24:33)I solved the problem with a newer install disc
It's sda now.
I finished the installation succesfully and also installed grub.
But after the bios was started I can only see a white cursor and arch doesn't boot.
After some research it seems that my notebook doesn't boot properly without the recovery partition which I already deleted.
What can I do? I didn't create any recovery cds and the partition is gone.
Last edited by smk (2010-09-20 08:55:13) -
Lenovo IdeaPad Yoga 13-Broken Screen
Hi guys,i bought a Lenovo IdeaPad Yoga 13.Now the screen is broken and it is in the touch screen mode.How do l disable the touch screen?
Please help.Device Manager > Human Interface Devices > HID-compliant touch screen > Disable
-
Replacing the screen of Lenovo ideapad s300
Hello,
I have a Lenovo ideapad s300 and I am trying to replace it's screen. However, in order to take out the screen I am unable to find the screw covers? Anyone know how to remove the screen of this laptop?Hello.
If you contact Apple Support at 1-(800)-MY-APPLE, they can get something together for you and tell you the steps to get your iPod fixed. Also, I found this link-
http://www.ipod-lcd-repair.com/
That website repairs iPods, so that might also be an option.
Message was edited by: MacorNothing -
Upgraded to Windows 10 on Lenovo Ideapad p400 touch, screen went dim
Hello,I just installed the free Windows 10 upgrade on my Lenovo Ideapad p400 touch last night. I woke up this morning and booted up my computer, and everything was fine until I attempted to change the brightness. When I tried to do this, my screen went very dim, and now I can't adjust the brightness (and I can't read my screen well, either). Normally, I would install/reinstall the video driver in order to fix this problem (recommended for other users with similar issues), but I currently do not see a Windows 10 version of the driver I need on the Lenovo website.I was wondering:a) if/when a new driver would be available to install (if that's the recommended solution)b) is there something else going on?c) Windows 10 allows you to revert back to Windows 8.1 within the first month of use. Should I just do this?d) Is the p400 touch capable of running Windows 10? Why or why not?Thank you!
Hello. I also have a Lenovo Ideapad p400 touch. Screen also went dim on me. In Windows 8.1 just uninstalling graphic's driver worked. It was Control Panel, Device Manager and then Display Adapters. That doesn't work with Windows 10. The other solution of rebooting and press the increase brightness key at the Lenovo logo somewhat works but it doesn't turn the brightness all the way up. So I found this worked for me: Go here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-p-series-laptops/ideapad-p400-touch-notebook/downloads/DS031547 And just download and reinstall the old graphics driver for Windows 8. That finally got me back to maximum brightness.
-
Lenovo Ideapad U410 scrolling down with a grey screen
HI,
I just recently purchased the Lenovo Ideapad U410 and sometimes when I try to scroll down with both fingers, a grey line and background bar starts to come down and encompass the whole screen, rendering the screen and all my apps useless. And then on the right side, it shows the time and date squished togetherand I can't seem to get out of it unless I go back to the start and then open the desktop again.
Why is it doing this and is there a way to stop it because when it scrolls all the way down, the laptop won't work and if I don't touch the touchpad, bubbles start forming forming as if it's a screen saver.
ThanksIt sounds like your hard drive is failing or has failed. It cannot repair the disk and is suggesting you back up and format the drive. Do you already have a backup?
A couple of things to try first:
NVRAM reset: http://support.apple.com/kb/HT1379
SMC reset: http://support.apple.com/kb/ht3964 -
[concluded] Enabling SLI (Lenovo Ideapad y500 / dual gt 650m)
final edit:
Apparently there is no support for sli on mobile nvidia gpu. Thank you ever so much Nvidia, you willf orever hold a special place in my heart..
I've miracously gotten everything else to work. Only thing left is enabling sli, which I haven't been able to.
As far as I know, I've follow the instruction to the letter, but all I get i a black screen and a log with no particular useful information that I can find:
[ 13.106]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 13.106] X Protocol Version 11, Revision 0
[ 13.106] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 13.106] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 13.106] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 13.106] Build Date: 14 April 2014 08:39:09AM
[ 13.106]
[ 13.106] Current version of pixman: 0.32.4
[ 13.106] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.106] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.107] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 17:50:00 2014
[ 13.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.108] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.109] (==) ServerLayout "Layout0"
[ 13.109] (**) |-->Screen "Screen0" (0)
[ 13.109] (**) | |-->Monitor "Monitor0"
[ 13.110] (**) | |-->Device "Device0"
[ 13.110] (**) |-->Input Device "Keyboard0"
[ 13.110] (**) |-->Input Device "Mouse0"
[ 13.110] (**) Option "BlankTime" "0"
[ 13.110] (==) Automatically adding devices
[ 13.110] (==) Automatically enabling devices
[ 13.110] (==) Automatically adding GPU devices
[ 13.112] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.112] Entry deleted from font path.
[ 13.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.113] Entry deleted from font path.
[ 13.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.114] Entry deleted from font path.
[ 13.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.114] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.114] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.114] (WW) Disabling Keyboard0
[ 13.114] (WW) Disabling Mouse0
[ 13.114] (II) Loader magic: 0x804c80
[ 13.114] (II) Module ABI versions:
[ 13.114] X.Org ANSI C Emulation: 0.4
[ 13.114] X.Org Video Driver: 15.0
[ 13.114] X.Org XInput driver : 20.0
[ 13.114] X.Org Server Extension : 8.0
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.114] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.117] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 13.117] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 13.117] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.117] Initializing built-in extension Generic Event Extension
[ 13.117] Initializing built-in extension SHAPE
[ 13.117] Initializing built-in extension MIT-SHM
[ 13.117] Initializing built-in extension XInputExtension
[ 13.117] Initializing built-in extension XTEST
[ 13.117] Initializing built-in extension BIG-REQUESTS
[ 13.117] Initializing built-in extension SYNC
[ 13.117] Initializing built-in extension XKEYBOARD
[ 13.118] Initializing built-in extension XC-MISC
[ 13.118] Initializing built-in extension SECURITY
[ 13.118] Initializing built-in extension XINERAMA
[ 13.118] Initializing built-in extension XFIXES
[ 13.118] Initializing built-in extension RENDER
[ 13.118] Initializing built-in extension RANDR
[ 13.118] Initializing built-in extension COMPOSITE
[ 13.118] Initializing built-in extension DAMAGE
[ 13.118] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.118] Initializing built-in extension DOUBLE-BUFFER
[ 13.118] Initializing built-in extension RECORD
[ 13.118] Initializing built-in extension DPMS
[ 13.118] Initializing built-in extension Present
[ 13.118] Initializing built-in extension DRI3
[ 13.118] Initializing built-in extension X-Resource
[ 13.118] Initializing built-in extension XVideo
[ 13.118] Initializing built-in extension XVideo-MotionCompensation
[ 13.118] Initializing built-in extension XFree86-VidModeExtension
[ 13.118] Initializing built-in extension XFree86-DGA
[ 13.119] Initializing built-in extension XFree86-DRI
[ 13.119] Initializing built-in extension DRI2
[ 13.119] (II) LoadModule: "glx"
[ 13.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.212] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.212] compiled for 4.0.2, module version = 1.0.0
[ 13.212] Module class: X.Org Server Extension
[ 13.212] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 13.212] Loading extension GLX
[ 13.212] (II) LoadModule: "nvidia"
[ 13.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.219] compiled for 4.0.2, module version = 1.0.0
[ 13.219] Module class: X.Org Video Driver
[ 13.220] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 13.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.220] (++) using VT number 1
[ 13.221] (II) Loading sub module "fb"
[ 13.221] (II) LoadModule: "fb"
[ 13.221] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.222] (II) Module fb: vendor="X.Org Foundation"
[ 13.222] compiled for 1.15.1, module version = 1.0.0
[ 13.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.222] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 13.222] (II) Loading sub module "wfb"
[ 13.222] (II) LoadModule: "wfb"
[ 13.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.223] (II) Module wfb: vendor="X.Org Foundation"
[ 13.223] compiled for 1.15.1, module version = 1.0.0
[ 13.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.223] (II) Loading sub module "ramdac"
[ 13.224] (II) LoadModule: "ramdac"
[ 13.224] (II) Module "ramdac" already built-in
[ 13.237] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.237] (==) NVIDIA(0): RGB weight 888
[ 13.237] (==) NVIDIA(0): Default visual is TrueColor
[ 13.237] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.238] (**) NVIDIA(0): Option "NoLogo" "True"
[ 13.238] (**) NVIDIA(0): Option "SLI" "Auto"
[ 13.238] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 13.238] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 13.238] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 13.238] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 13.238] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.238] (**) NVIDIA(0): Ignoring EDIDs
[ 17.131] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 17.131] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 17.131] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 17.131] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
In the end, all that I can learn from this is that stuff don't work, not why or how to fix it. A bit annoying to be blunt.
I've been googling around for answers, but the closest thing I've come to an answer, and I do hope it isn't true, is that sli om mobile nvidia gpu is not supported under linux. I've been unable to confirm this.
I do hope you can help.
Best regards.
edit:
Just for kicks, here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Ya, it's a mess, but nothing particular wrong with is that I can see.
edit2:
Just in case some information is lagging, here is the nvidia compiled bug report in it's entirety:
Start of NVIDIA bug report log file. Please include this file, along
with a detailed description of your problem, when reporting a graphics
driver bug via the NVIDIA Linux forum (see devtalk.nvidia.com)
or by sending email to '[email protected]'.
nvidia-bug-report.sh Version: 17818519
Date: lør maj 31 21:11:50 CEST 2014
uname: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
command line flags:
*** /etc/issue
*** ls: -rw-r--r-- 1 root root 20 2013-05-31 20:40:23.000000000 +0200 /etc/issue
Arch Linux \r (\l)
*** /var/log/nvidia-installer.log does not exist
*** /var/log/Xorg.0.log
*** ls: -rw-r--r-- 1 root zacariaz 7488 2014-05-31 21:10:38.492892729 +0200 /var/log/Xorg.0.log
[ 11.874]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 11.874] X Protocol Version 11, Revision 0
[ 11.874] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 11.875] Current Operating System: Linux zarchbook 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 11.875] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 11.875] Build Date: 14 April 2014 08:39:09AM
[ 11.875]
[ 11.875] Current version of pixman: 0.32.4
[ 11.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.875] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 31 21:10:34 2014
[ 11.877] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.877] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.878] (==) ServerLayout "Layout0"
[ 11.878] (**) |-->Screen "Screen0" (0)
[ 11.878] (**) | |-->Monitor "Monitor0"
[ 11.878] (**) | |-->Device "Device0"
[ 11.878] (**) |-->Input Device "Keyboard0"
[ 11.878] (**) |-->Input Device "Mouse0"
[ 11.878] (**) Option "BlankTime" "0"
[ 11.878] (==) Automatically adding devices
[ 11.878] (==) Automatically enabling devices
[ 11.878] (==) Automatically adding GPU devices
[ 11.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.881] Entry deleted from font path.
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.882] Entry deleted from font path.
[ 11.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.882] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.882] (WW) Disabling Keyboard0
[ 11.882] (WW) Disabling Mouse0
[ 11.882] (II) Loader magic: 0x804c80
[ 11.882] (II) Module ABI versions:
[ 11.882] X.Org ANSI C Emulation: 0.4
[ 11.882] X.Org Video Driver: 15.0
[ 11.882] X.Org XInput driver : 20.0
[ 11.882] X.Org Server Extension : 8.0
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.883] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.885] (--) PCI:*(0:1:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 11.885] (--) PCI: (0:2:0:0) 10de:0fd1:17aa:3972 rev 161, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 11.885] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.886] Initializing built-in extension Generic Event Extension
[ 11.886] Initializing built-in extension SHAPE
[ 11.886] Initializing built-in extension MIT-SHM
[ 11.886] Initializing built-in extension XInputExtension
[ 11.886] Initializing built-in extension XTEST
[ 11.886] Initializing built-in extension BIG-REQUESTS
[ 11.886] Initializing built-in extension SYNC
[ 11.886] Initializing built-in extension XKEYBOARD
[ 11.886] Initializing built-in extension XC-MISC
[ 11.886] Initializing built-in extension SECURITY
[ 11.886] Initializing built-in extension XINERAMA
[ 11.886] Initializing built-in extension XFIXES
[ 11.886] Initializing built-in extension RENDER
[ 11.886] Initializing built-in extension RANDR
[ 11.886] Initializing built-in extension COMPOSITE
[ 11.886] Initializing built-in extension DAMAGE
[ 11.886] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.886] Initializing built-in extension DOUBLE-BUFFER
[ 11.887] Initializing built-in extension RECORD
[ 11.887] Initializing built-in extension DPMS
[ 11.887] Initializing built-in extension Present
[ 11.887] Initializing built-in extension DRI3
[ 11.887] Initializing built-in extension X-Resource
[ 11.887] Initializing built-in extension XVideo
[ 11.887] Initializing built-in extension XVideo-MotionCompensation
[ 11.887] Initializing built-in extension XFree86-VidModeExtension
[ 11.887] Initializing built-in extension XFree86-DGA
[ 11.887] Initializing built-in extension XFree86-DRI
[ 11.887] Initializing built-in extension DRI2
[ 11.887] (II) LoadModule: "glx"
[ 11.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.978] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.978] compiled for 4.0.2, module version = 1.0.0
[ 11.978] Module class: X.Org Server Extension
[ 11.978] (II) NVIDIA GLX Module 337.19 Tue Apr 29 19:48:33 PDT 2014
[ 11.979] Loading extension GLX
[ 11.979] (II) LoadModule: "nvidia"
[ 11.979] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.986] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.986] compiled for 4.0.2, module version = 1.0.0
[ 11.986] Module class: X.Org Video Driver
[ 11.986] (II) NVIDIA dlloader X Driver 337.19 Tue Apr 29 19:22:36 PDT 2014
[ 11.986] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.987] (++) using VT number 1
[ 11.988] (II) Loading sub module "fb"
[ 11.988] (II) LoadModule: "fb"
[ 11.988] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.989] (II) Module fb: vendor="X.Org Foundation"
[ 11.989] compiled for 1.15.1, module version = 1.0.0
[ 11.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.989] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11.989] (II) Loading sub module "wfb"
[ 11.989] (II) LoadModule: "wfb"
[ 11.989] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.990] (II) Module wfb: vendor="X.Org Foundation"
[ 11.990] compiled for 1.15.1, module version = 1.0.0
[ 11.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.990] (II) Loading sub module "ramdac"
[ 11.990] (II) LoadModule: "ramdac"
[ 11.990] (II) Module "ramdac" already built-in
[ 12.004] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.004] (==) NVIDIA(0): RGB weight 888
[ 12.004] (==) NVIDIA(0): Default visual is TrueColor
[ 12.004] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.004] (**) NVIDIA(0): Option "NoLogo" "True"
[ 12.004] (**) NVIDIA(0): Option "SLI" "Auto"
[ 12.004] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes"
[ 12.004] (**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
[ 12.004] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 12.004] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
[ 12.004] (**) NVIDIA(0): Enabling 2D acceleration
[ 12.004] (**) NVIDIA(0): Ignoring EDIDs
[ 15.847] (WW) NVIDIA(GPU-0): Failed to initialize the SLI configuration for the NVIDIA
[ 15.847] (WW) NVIDIA(GPU-0): graphics device PCI:1:0:0. Please see Chapter 29:
[ 15.847] (WW) NVIDIA(GPU-0): Configuring SLI and Multi-GPU FrameRendering in the README
[ 15.847] (WW) NVIDIA(GPU-0): for troubleshooting suggestions.
*** /etc/X11/xorg.conf
*** ls: -rw-r--r-- 1 root root 1733 2014-05-31 21:10:12.876322985 +0200 /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "BlankTime" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 66.5 - 66.5
VertRefresh 59.9
ModeLine "1920x1080" 138.500 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync
Option "DPMS"
EndSection
Section "Device"
BusID "PCI:1:0:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1920x1080_60 +0+0 { ForceFullCompositionPipeline = On }"
Option "NoLogo" "True"
Option "ModeValidation" "AllowNonEdidModes"
Option "UseEDID" "FALSE"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
EndSubSection
EndSection
*** /etc/X11/xorg.conf.d/10-evdev.conf
*** ls: -rw-r--r-- 1 root root 1099 2014-04-14 10:40:04.000000000 +0200 /etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
*** /etc/X11/xorg.conf.d/10-keyboard.conf
*** ls: -rw-r--r-- 1 root root 201 2014-05-07 20:02:13.920335503 +0200 /etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "dk"
Option "XkbModel" "pc104"
Option "XkbVariant" "qwerty"
EndSection
*** /etc/X11/xorg.conf.d/10-quirks.conf
*** ls: -rw-r--r-- 1 root root 377 2014-04-14 10:40:06.000000000 +0200 /etc/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
*** /home/zacariaz/.nvidia-settings-rc
*** ls: -rw-r--r-- 1 zacariaz users 1982 2014-05-31 20:34:36.266975242 +0200 /home/zacariaz/.nvidia-settings-rc
# /home/zacariaz/.nvidia-settings-rc
# Configuration file for nvidia-settings - the NVIDIA X Server Settings utility
# Generated on Sat May 31 20:34:36 2014
# ConfigProperties:
RcFileLocale = C
ToolTips = Yes
DisplayStatusBar = Yes
SliderTextEntries = Yes
IncludeDisplayNameInConfigFile = No
ShowQuitDialog = Yes
UpdateRulesOnProfileNameChange = Yes
Timer = PowerMizer_Monitor_(GPU_1),Yes,1000
Timer = Thermal_Monitor_(GPU_1),Yes,1000
Timer = Memory_Used_(GPU_1),Yes,3000
Timer = Memory_Used_(GPU_0),Yes,3000
Timer = Thermal_Monitor_(GPU_0),Yes,1000
Timer = PowerMizer_Monitor_(GPU_0),Yes,1000
# Attributes:
0/SyncToVBlank=1
0/LogAniso=0
0/FSAA=0
0/TextureSharpen=0
0/TextureClamping=1
0/FXAA=0
0/AllowFlipping=1
0/FSAAAppControlled=1
0/LogAnisoAppControlled=1
0/OpenGLImageSettings=3
0/FSAAAppEnhanced=0
0/XVideoSyncToDisplayID=VGA-0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
[DPY:VGA-0]/Dithering=0
[DPY:VGA-0]/DitheringMode=0
[DPY:VGA-0]/DitheringDepth=0
[DPY:VGA-0]/SynchronousPaletteUpdates=0
[DPY:LVDS-0]/RedBrightness=0.000000
[DPY:LVDS-0]/GreenBrightness=0.000000
[DPY:LVDS-0]/BlueBrightness=0.000000
[DPY:LVDS-0]/RedContrast=0.000000
[DPY:LVDS-0]/GreenContrast=0.000000
[DPY:LVDS-0]/BlueContrast=0.000000
[DPY:LVDS-0]/RedGamma=1.000000
[DPY:LVDS-0]/GreenGamma=1.000000
[DPY:LVDS-0]/BlueGamma=1.000000
[DPY:LVDS-0]/Dithering=0
[DPY:LVDS-0]/DitheringMode=0
[DPY:LVDS-0]/DitheringDepth=0
[DPY:LVDS-0]/DigitalVibrance=0
[DPY:LVDS-0]/ColorSpace=0
[DPY:LVDS-0]/ColorRange=0
[DPY:LVDS-0]/SynchronousPaletteUpdates=0
[DPY:HDMI-0]/Dithering=0
[DPY:HDMI-0]/DitheringMode=0
[DPY:HDMI-0]/DitheringDepth=0
[DPY:HDMI-0]/SynchronousPaletteUpdates=0
*** /usr/share/nvidia/nvidia-application-profiles-337.19-rc
*** ls: -rw-r--r-- 1 root root 2310 2014-05-20 14:28:33.000000000 +0200 /usr/share/nvidia/nvidia-application-profiles-337.19-rc
# Application profiles for the NVIDIA Linux graphics driver, version 337.19
# Last modified: Tue Apr 29 19:51:54 PDT 2014
# These profiles were provided by NVIDIA and should not be modified. If you
# wish to change the defaults provided here, you can override them by creating
# custom rules in /etc/nvidia/nvidia-application-profiles-rc (which will apply
# system-wide) or, for a given user, $HOME/.nv/nvidia-application-profiles-rc
# (which will apply to that particular user). See the "APPLICATION PROFILE
# SEARCH PATH" section of the NVIDIA Linux Graphics Driver README for more
# information.
"profiles" : [
"name" : "NonConformantBlitFramebufferScissor",
"settings" : [ "GLConformantBlitFramebufferScissor", false ]
"name" : "CL1C",
"settings" : [ "0x528ab3", 1 ]
"name" : "FA0",
"settings" : [ "10572898", 0 ]
"name" : "ExactGLESVersion",
"settings" : [ "ForceRequestedESVersion", 1 ]
"name" : "BGTE",
"settings" : [ "GLAppReturnOnlyBasicGlslType", 1 ]
"rules" : [
# Work around GNOME bug 690451 (see
# https://bugzilla.gnome.org/show_bug.cgi?id=690451)
"pattern" : {
"feature" : "dso",
"matches" : "libcogl.so"
"profile" : "NonConformantBlitFramebufferScissor"
{ "pattern" : "Maya2014", "profile" : "CL1C" },
{ "pattern" : "xsi", "profile" : "CL1C" },
{ "pattern" : "HoudiniFX", "profile" : "CL1C" },
{ "pattern" : "katana", "profile" : "CL1C" },
{ "pattern" : "Autodesk Mudbox 2014 64-bit", "profile" : "CL1C" },
{ "pattern" : "octane", "profile" : "CL1C" },
{ "pattern" : "Fusion64_6.4", "profile" : "CL1C" },
{ "pattern" : "Nuke7.0", "profile" : "CL1C" },
{ "pattern" : "vray.exe", "profile" : "CL1C" },
{ "pattern" : "vray.bin", "profile" : "CL1C" },
{ "pattern" : "kwin_gles", "profile" : "FA0" },
{ "pattern" : "kwin_gles", "profile" : "ExactGLESVersion" },
{ "pattern" : "heaven_x86", "profile" : "BGTE" },
{ "pattern" : "heaven_x64", "profile" : "BGTE" }
Skipping ldd output (glxinfo not found)
/sbin/lspci -d "10de:*" -v -xxx
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at b4080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 80 00
10: 00 00 00 b3 0c 00 00 a0 00 00 00 00 0c 00 00 b0
20: 00 00 00 00 01 40 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00: de 10 1b 0e 06 00 10 00 a1 00 03 04 10 00 80 00
10: 00 00 00 b4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 77 39
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 02 00 00
40: aa 17 77 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 e1 8d 2c 01
80: 30 29 00 00 03 3d 45 00 43 00 81 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 00 00 01 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3972
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] #19
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
00: de 10 d1 0f 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 b2 0c 00 00 c0 00 00 00 00 0c 00 00 d0
20: 00 00 00 00 01 30 00 00 00 00 00 00 aa 17 72 39
30: 00 00 f8 ff 60 00 00 00 00 00 00 00 00 01 00 00
40: aa 17 72 39 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e1 8d 2c 01
80: 10 29 00 00 03 3d 45 01 43 00 82 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 13 00 00 00
a0: 00 00 00 00 0e 00 00 00 03 00 01 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/sbin/lspci -d "10b5:*" -v -xxx
/sbin/lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
+-01.1-[02]----00.0
+-14.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[03]----00.0
+-1c.1-[04]----00.0
+-1c.3-[05]--+-00.0
| +-00.2
| +-00.3
| \-00.4
+-1d.0
+-1f.0
+-1f.2
\-1f.3
/sbin/lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107M [GeForce GT 650M] [10de:0fd1] (rev a1)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
04:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
05:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
05:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30)
05:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30)
05:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30)
/sbin/lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07da Intel Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b331 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Skipping dmidecode output (dmidecode not found)
/sbin/modinfo nvidia | grep vermagic
vermagic: 3.14.4-1-ARCH SMP preempt mod_unload modversions
Scanning kernel log files for NVRM messages:
/var/log/messages is not readable
/var/log/kernel.log is not readable
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x985ad018-0x985d3057] usable ==> usable
[ 0.000000] e820: update [mem 0x98586018-0x985ac057] usable ==> usable
[ 0.000000] e820: update [mem 0x98579018-0x98585057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000098579017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098579018-0x0000000098585057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098585058-0x0000000098586017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000098586018-0x00000000985ac057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ac058-0x00000000985ad017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985ad018-0x00000000985d3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000985d3058-0x00000000995affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009a9b0000-0x000000009efbefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009efbf000-0x000000009f6befff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x000000009fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9f7fe000 ACPI 2.0=0x9f7fe014 SMBIOS=0x9f6bef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5b000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f5b000-0x000000007f857000) (2008MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007f857000-0x0000000080000000) (7MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000979c0000) (377MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000979c0000-0x00000000979e0000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000979e0000-0x0000000097e62000) (4MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000097e62000-0x000000009821b000) (3MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009821b000-0x0000000098579000) (3MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000098579000-0x00000000985d4000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000985d4000-0x00000000995b0000) (15MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x00000000995b0000-0x000000009a9b0000) (20MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000009a9b0000-0x000000009a9b8000) (0MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000009a9b8000-0x000000009a9bb000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x000000009a9bb000-0x000000009a9bc000) (0MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x000000009a9bc000-0x000000009a9bd000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x000000009a9bd000-0x000000009a9be000) (0MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x000000009a9be000-0x000000009a9bf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x000000009a9bf000-0x000000009aba8000) (1MB)
[ 0.000000] efi: mem27: type=1, attr=0xf, range=[0x000000009aba8000-0x000000009abbf000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x000000009abbf000-0x000000009af27000) (3MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x000000009af27000-0x000000009b063000) (1MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000009b063000-0x000000009b064000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000009b064000-0x000000009c9f3000) (25MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000009c9f3000-0x000000009c9fb000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x000000009c9fb000-0x000000009ca11000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000009ca11000-0x000000009ca12000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000009ca12000-0x000000009ca1d000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x000000009ca1d000-0x000000009ca1f000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000009ca1f000-0x000000009ca21000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x000000009ca21000-0x000000009ca22000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000009ca22000-0x000000009ca45000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x000000009ca45000-0x000000009ca47000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000009ca47000-0x000000009cd81000) (3MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x000000009cd81000-0x000000009cd82000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009cd82000-0x000000009cfa7000) (2MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009cfa7000-0x000000009cfa8000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009cfa8000-0x000000009cfbf000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009cfbf000-0x000000009cfc5000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000009cfc5000-0x000000009cfd0000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x000000009cfd0000-0x000000009cfd2000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000009cfd2000-0x000000009cfe9000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009cfe9000-0x000000009cfea000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009cfea000-0x000000009ebbf000) (27MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009ebbf000-0x000000009ec3a000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x000000009ec3a000-0x000000009efbf000) (3MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x000000009efbf000-0x000000009f04e000) (0MB)
[ 0.000000] efi: mem55: type=6, attr=0x800000000000000f, range=[0x000000009f04e000-0x000000009f050000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x000000009f050000-0x000000009f066000) (0MB)
[ 0.000000] efi: mem57: type=6, attr=0x800000000000000f, range=[0x000000009f066000-0x000000009f067000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x000000009f067000-0x000000009f07f000) (0MB)
[ 0.000000] efi: mem59: type=6, attr=0x800000000000000f, range=[0x000000009f07f000-0x000000009f080000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x000000009f080000-0x000000009f08b000) (0MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000009f08b000-0x000000009f08c000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x000000009f08c000-0x000000009f091000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009f091000-0x000000009f092000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x000000009f092000-0x000000009f0a0000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009f0a0000-0x000000009f0a1000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x000000009f0a1000-0x000000009f0f2000) (0MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009f0f2000-0x000000009f137000) (0MB)
[ 0.000000] efi: mem68: type=5, attr=0x800000000000000f, range=[0x000000009f137000-0x000000009f1bf000) (0MB)
[ 0.000000] efi: mem69: type=6, attr=0x800000000000000f, range=[0x000000009f1bf000-0x000000009f2bf000) (1MB)
[ 0.000000] efi: mem70: type=0, attr=0xf, range=[0x000000009f2bf000-0x000000009f6bf000) (4MB)
[ 0.000000] efi: mem71: type=10, attr=0xf, range=[0x000000009f6bf000-0x000000009f7bf000) (1MB)
[ 0.000000] efi: mem72: type=9, attr=0xf, range=[0x000000009f7bf000-0x000000009f7ff000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009f7ff000-0x000000009f800000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f000000) (13808MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x000000009f800000-0x00000000a0000000) (8MB)
[ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
[ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20193/INVALID, BIOS 6BCN42WW(V2.02) 02/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask F80000000 write-back
[ 0.000000] 7 base 45F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 460000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45ee00000-0x45effffff]
[ 0.000000] [mem 0x45ee00000-0x45effffff] page 2M
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45edfffff]
[ 0.000000] [mem 0x45c000000-0x45edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x995affff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x993fffff] page 2M
[ 0.000000] [mem 0x99400000-0x995affff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] [mem 0x9a9b0000-0x9a9fffff] page 4k
[ 0.000000] [mem 0x9aa00000-0x9edfffff] page 2M
[ 0.000000] [mem 0x9ee00000-0x9efbefff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] [mem 0x9f7ff000-0x9f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7f857000-0x7fffffff]
[ 0.000000] ACPI: RSDP 000000009f7fe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000009f7fe210 0000AC (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009f7fa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 000000009f7ed000 009D93 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009f7bb000 000040
[ 0.000000] ACPI: SLIC 000000009f7fd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 000000009f7fc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 000000009f7fb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 000000009f7f9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 000000009f7f8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 000000009f7f7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7ec000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009f7ea000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 000000009f7e5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 000000009f7e4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 000000009f7e2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 000000009f7e1000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7e0000 000926 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7df000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009f7dc000 0010F1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009f7de000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45effffff]
[ 0.000000] NODE_DATA [mem 0x45efea000-0x45efeefff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044e600000-ffff88045e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x995affff]
[ 0.000000] node 0: [mem 0x9a9b0000-0x9efbefff]
[ 0.000000] node 0: [mem 0x9f7ff000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x45effffff]
[ 0.000000] On node 0 totalpages: 4180807
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3975 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10031 pages used for memmap
[ 0.000000] DMA32 zone: 641984 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98579000-0x98579fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98585000-0x98585fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x98586000-0x98586fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ac000-0x985acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985ad000-0x985adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x985d3000-0x985d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x995b0000-0x9a9affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9efbf000-0x9f6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f6bf000-0x9f7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f7bf000-0x9f7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045ec00000 s87040 r8192 d23552 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d23552 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet nomodeset rcutree.rcu_idle_gp_delay=1 loglevel=3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16292016K/16723228K available (5230K kernel code, 857K rwdata, 1632K rodata, 1120K init, 1288K bss, 431212K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.558 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.66 BogoMIPS (lpj=7981860)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20131218
[ 0.006081] ACPI: All ACPI Tables successfully acquired
[ 0.030009] Security Framework initialized
[ 0.030016] Yama: becoming mindful.
[ 0.031004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.036876] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036893] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037118] Initializing cgroup subsys memory
[ 0.037123] Initializing cgroup subsys devices
[ 0.037125] Initializing cgroup subsys freezer
[ 0.037126] Initializing cgroup subsys net_cls
[ 0.037127] Initializing cgroup subsys blkio
[ 0.037150] CPU: Physical Processor ID: 0
[ 0.037151] CPU: Processor Core ID: 0
[ 0.037156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037529] mce: CPU supports 9 MCE banks
[ 0.037542] CPU0: Thermal monitoring enabled (TM1)
[ 0.037553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.037649] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[ 0.041198] ftrace: allocating 20029 entries in 79 pages
[ 0.050996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084028] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.084036] TSC deadline timer enabled
[ 0.084045] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.084051] ... version: 3
[ 0.084052] ... bit width: 48
[ 0.084053] ... generic registers: 4
[ 0.084054] ... value mask: 0000ffffffffffff
[ 0.084055] ... max period: 0000ffffffffffff
[ 0.084056] ... fixed-purpose events: 3
[ 0.084057] ... event mask: 000000070000000f
[ 0.110826] x86: Booting SMP configuration:
[ 0.110828] .... node #0, CPUs: #1
[ 0.124613] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131276] #2 #3 #4 #5 #6 #7
[ 0.246855] x86: Booted up 1 node, 8 CPUs
[ 0.246859] smpboot: Total of 8 processors activated (38328.30 BogoMIPS)
[ 0.254157] devtmpfs: initialized
[ 0.257424] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[ 0.258171] pinctrl core: initialized pinctrl subsystem
[ 0.258207] RTC time: 19:11:33, date: 05/31/14
[ 0.258239] NET: Registered protocol family 16
[ 0.258316] cpuidle: using governor ladder
[ 0.258318] cpuidle: using governor menu
[ 0.258361] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.258362] ACPI: bus type PCI registered
[ 0.258364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258425] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.258428] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.266014] PCI: Using configuration type 1 for base access
[ 0.266838] bio: create slab <bio-0> at 0
[ 0.266930] ACPI: Added _OSI(Module Device)
[ 0.266932] ACPI: Added _OSI(Processor Device)
[ 0.266933] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269731] ACPI: Executed 1 bTrilby wrote:
zacariaz wrote:* b u m p *
Do not do this.
If you want help, start providing relevant information beyond "it don't work". You say you followed the instructions ... which instructions? What steps did you take? It is clear from your xorg.conf that you did not follow the only instructions I could find in the archlinux wiki. Follow those instructions, and post the output of the relevant diagnostic or information-gathering steps included there.
Also if you have information which could be useful - such as which mobile devices/cards allegedly don't work - then share that. Don't keep us in the dark.
I should think that it's quite obvious that I've followed the wiki instruction, which basically is one line in xorg, as is the official nvidia instructions.
This is most likely a problem related specificlally to the gt 650m and/or the lenovo ideapad y500 (and perhaps derivatives thereof).
I do not believe I've left any information out.
Of course if I've done something wrong, I apologize and will do my best to avoid it in the future. As for the rest, I'd very much like to know which instructions I did not follow, as I've done all that I can think of and telling me that I haven't is hardly useful. As far as I aware, the wiki instructs you to ad two line in the xorg.conf, which I've done. I will of course read it again, hoping to figure out what I've apparently missed, though I've read it so many times already that I don't expect to learn anything. -
Lenovo ideapad s410p screen keeps black out,and started twitching
I have just bought a new lenovo ideapad s410p a month ago. The problem started when i inserted an external hard disk into the laptop and opened the photo gallery. The screen will suddenly blackout and srarted twitching.i on and off, and tried all other posible ways but the problem repeared. Once i on, it will totally blackout and have to wait quie long for it to load. Even i on, the screen also twitch. I dont know what is the problem and i have sent to the shop whwre i bought it and they couldnt find the problem.after a few days the same problem occured again.what is happening??
Heloo,
Don' turn off the Fish Pump!
~BDAqua
http://www.yelp.com/biz/b-and-d-aquarium-seattle
Ray C was a bit out of touch & was speaking of a place a half mile away that supports "Growers" for Hydroponic stuff... LOL
Anyway...
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/ -
Lenovo ideapad u510 w/Fedora 19 Live USB black screen
I am having difficulty with a new lenovo ideapad u510. I am attempting to install Fedora 19 using the Fedora 19 xfce spin Live USB image, and the drive boots properly, but upon selecting the option to start Fedora 19 Live, I get a gray screen with a cursor on the top left, then two error messages that look almost idential to each other flash by, the Fedora logo starts to load, and then the screen goes blank.
The part of the error message that I was able to make out was "...failed to enable the AA(?????)"
I have attempted to turn the monitor back on using the F9 key's alternate function, and I have tried booting from DVD with the same result. Once the screen goes blank, it stays that way until I force the machine to shut down. Once I've forced the shutdown, the computer, upon turning back on, goes to the blank screen again without even loading the lenovo BIOS screen. Even the 'novo' button will not load any options for me.
My UEFI is set to Legacy / Legacy First, although the EFI setting is still Windows 8, with no alternate options. I've looked all through my settings in every tab of the BIOS and I can't find anything further to disable secure boot.
Is anybody able to assist me in installing Fedora?
Solved!
Go to Solution.Follow up:
I have tried more flavors of linux, and over the course of doing that, I have discovered that after choosing to boot a linux live disk, the screen does not instantly go black as I had thought with the Fedora installation, but rather is reduced to 1/4 the physical size of the screen for a few seconds, then goes blank. After it goes blank, apparently, the live OS continues to load, as evidenced by the loading .wav sounds that play even after the screen is blank.
More and more I'm convinced that the graphics hardware is causing problems, but the lenovo site is completely silent about the specifics of the graphics, saying only that the hardware is nvidia GeForce series. -
How to reformat lenovo ideapad s410p Touch (from windows 8 - windows 7)
hi guys, pls somebody make a guide how to reformat lenovo ideapad s410p Touch . thanks
You should be able to get Win 7 Pro 32, as it is listed here:
LINK
So speak to Lenovo indeed ...
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer. -
Lenovo H330 Beep Code: 1 long 3 short and blank screen
I have an issue with startup, every now and again my startup initiates what sounds like 2 long beeps followed by 3 short ones - 'beep-beep' + 'beep+beep+beep' - but from what I've seen, throughout online discussion, it is only 1 long beep followed by 3 short ones. After this tune is played my screen remains blank, and on another attempt of start up the PC runs fine. Any ideas?
Solved!
Go to Solution.Since the computer's behavior changed after re-seating the memory I would double check the memory slots. Remove the memory and shine a flashlight into the slot to see that there is no debris in the slot and that the contacts look fairly shiny. Also look at your memory module contacts. You can lightly rub these contacts with a pencil eraser to insure they are clean. Just be sure there is no eraser residue left on them before re-inserting them into the computer and avoid touching the contacts with your fingers.
If the above doesn't offer any help then try booting the computer with just one memory module installed. I assume you have two in there. Then see how it boots. If it boots Ok then swap the module for the other one. If both of them boot Ok by themselves then move the memory module over to the other slot and try booting up the computer.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Lenovo G560 - Issue with won't boot and black screen after HDD upgrade
Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
When I bring up my Mozillafirefox, all I get is a window with a blank white screen, (and the firefox logo). (After using Firefox very happily for over a year, I had to 'reinstall' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks as a result therein), and hope I can get my firefox back this time without having to reinstall. Mozilla Firefox is still listed as one of my active programs). HELP! Is there a way to get my firefox back without reinstalling? Many thanks!
== This happened ==
Every time Firefox opened
== June 30, 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)same problem. wtf. just happened one day when i went to use it. nothing out of the ordinary installed either....
-
Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.
In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.
Maybe you are looking for
-
When I try to return a book, I get the error message E-BAD_LOAN_ID. I am using Adobe Digital Editions 2.0. How do I resolve this problem?
-
Find Author name of a FM using ABAP
Hi Everyone, given a function name, I want to find out the author name using ABAP code. Thanks Misbah
-
¿Custom button with different size/shape for rollover state in Muse?
Hello, i'm trying to make a custom button, that has one size/shape when normal, and other size/shape when rollover. The problem is that the area not visible in normal state is a hot area, so when then mouse rollover anywhere near, activates the butto
-
How to shuffle on albums and not the individual tracks on albums
This is breaking my head. I have ripped my CD's in iTunes and now i have a large number of songs. I have a playlist that is uploaded to my iPod Shuffle. But my Q is: How can i shuffle on my iPod shuffle between albums instead of the individual songs.
-
My screen turns gray stays with the ball going around what I can do to boot right?
my screen turns gray stays with the ball going around what I can do to boot right?