Reformatted computer and now nothing works

Hi, I recentry reinstalled Windows 7 on my HP 584037-001 laptop due to some pretty bad computer problems.  The problems I was having prevented me from doing a back up.  I successfully reinstalled windows but now none of the drivers are working including the internet, sound, usb ports, etc.  I do not have any back up disks that came with the computer.
How I can fix this problem?  Is it possible to download the drivers from somewhere and copy and paste them on my computer?  Where on earth do I find they these drivers??   
Thanks!
This question was solved.
View Solution.

Hi:
Below are the links to the drivers you need...
SMBus controller:
Here is what you need to do for the smbus controller...
I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. 
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
USB3:  Install both of these and reboot.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&sp...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&sp...
Graphics:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105905-1&cc=us&dlc=en&lc=en...
Audio:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105090-2&cc=us&dlc=en&lc=en...
Ethernet:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105075-1&cc=us&dlc=en&lc=en...
Wireless:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en...
Bluetooth:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104112-1&cc=us&dlc=en&lc=en...
Card Reader:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105087-1&cc=us&dlc=en&lc=en...
Webcam:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113943-1&cc=us&dlc=en&lc=en...
ProtectSmart:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&dlc=en&lc=en...
QuickLaunch:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en...
Attachments:
sp66185.zip ‏7 KB

Similar Messages

  • Upgraded and now nothing works. No desktop icons at all!! Totally ruined. What do I do now?

    just upgraded to Yosemite and now nothing works and no desktop icons or dock!! Help what has happened? I've an iMac early 2008 and 56 gig free and 2 gig ram. This was supposed to be enough. Now lost everything. Can anyone help?

    There may be a problem with UI files inside system directories, so your files are not 100% lost. You need to check it.
    Do you have a recovery flash drive for OS X, bootable OS X flash drive? If so, you can boot iMac from that drive and just fix the system on your computer.
    If you don't have, you should create it (at least for safety in similar situations) with another mac or pc.
    Off topic: It happened to me too when I tried to replace some textures in Yosemite with textures from Mountain Lion and the process went wrong. So don't be sure that the whole system is ruined, it may just be the graphical part that crashed, but your documents are ok.

  • My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

    My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

    Do you see anything on the TV?
    If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
    ~Lyssa

  • I UPGRADED TO 4.0 AND NOW NOTHING WORKS I CANT EVEN GET TO THE WEB

    I UPGRADED TO 4.0 AND NOW NOTHING WORKS NONE OF MY PLUGINS I CANT EVEN GET TO THE WEB WITHOUT GET A ERROR MESSAGE. WHATS WRONG

    And that error message is?

  • HT201274 I went to General Reset Erase All Content & Settings - and now nothing works. I tried the advice on this forum, i.e., turn the phone off, connect to the white apple cable while pressing the home key. Still not working. What do I do?

    After i dod the above my ipone still does not work. It seems like all settings are gone. I tried the advice on one of the forums here which was turn the phone off, connect to the cable to the computer and not the phone, press the home button continously and connect the cable. Itunes at this point identified the phone and prompted to restore settings. It seemed to be doing something but now once I tried turning it on, its still not working.

    start iTunes,
    plug in your USB cable
    switch off your iPhone
    press holding home button(the round button in front of the Phone)
    plug it on to the USB cable
    keep holding the button
    till iTunes says it found a iPhone in recovery mode
    then click restore as a NEW iPhone
    then sync!?
    http://support.apple.com/kb/HT1414

  • Deleted Items from Hard Drive folder and now nothing works ...

    Hi All,
    Under the 'Search For' heading in the right hand column of the grey box that comes up when you open your hard drive, there are the heading All Images, All Movies, All Docs .... I've deleted about 2600 files from the 'All Images' folder and now my iPhoto won't open as there is nothing in it, and my Entourage crashes when I try to open it.
    I've obviously deleted files that were needed for these applications. The items are all still in my Trash, but I don't know how to return the files to their original homes. Can anyone help please?
    Thank you

    V.K. - thank you for your help. I've manually moved all my photos back to iPhoto and that's back up and running.
    The problem I'm left with is how to reinstate the correct files to Entourage. Even if I could identify which files are part of that application (can anyone help with that?), I'm still not sure how to put them back into Entourage. Is it simply a matter of dragging them over to my Entourage icon?

  • HELP!!!! Just upgrade to Tiger and now nothing works

    Please help me iv just upgraded to tiger and now none of my programs will open they crash on start-up, and also when i restart i get a little box with a blue globe inside it. then it goes to the unhappy face in a folder icon, then eventually it starts up. Please help me im buggerd without the mac.

    Hi Andy!
    What size is the Hard Drive, and how much space is avaialble?
    How much RAM is installed, and is it original or added?
    Did you use a Full Retail Version, of the Tiger Install DVD, to upgrade?
    Did you do an Archive & Install, preserving User settings & preferences, installation, and if so, is the Previous System folder still on the HD?
    ali b

  • Updated Software and now nothing works

    I just recently done a software update to my Macbook Pro and when it had finished and I went to use the likes of Mozilla or Safari, they wouldnt work. Tried to use the system update again, it wouldn't work. So basically nothing will open at all. Anyone got any suggestions as to what I could do so it will work?

    Did you restart your Mac after the installs, and repair permissions?
    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • A friend upgraded my flash player and now nothing will work.

    I am completely computer stupid. My friend said that my flash player needed to be upgraded. He upgraded it for me and now nothing will work. Youtube, games, etc. Can someone help me fix it. Like I said I am computer stupid so I will need step by step instructions if anyone can help.

    amhinton1 wrote:
    in Windows/system32/macromed/flash is a text document called FlashInstall.
    This means that Flash Player is not installed - the required files should be in this folder.
    Download this installer http://www.adobe.com/go/full_flashplayer_win_ie; save it to disk (e.g. your Desktop), then close all browser windows and run the downloaded installer.
    What do you now have in that folder?
    Is Flash Player now enabled, and is it working?  (Check it here http://www.adobe.com/software/flash/about/)

  • Downloded upgrade of itunes on my computer and now it dosn't work at all.  downloaded again and still will not work.

    I downloded upgrade of itunes on my computer and now it dosn't work at all.  i dowloaded from the web site, but still will not work.  can anyone help.

    Put it in DFU mode and restore it. (google for instructions on entering DFU mode).

  • I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

    I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

    Tech support is not normally available on weekends.  You should contact them as soon as the weekend passes and pick up where you left off with them.

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    summarizing:
    iPod nano (what version iOS BEFORE update?)
    downloaded music
    updated iPod to iOS 8.1.2
    Windows 7 PC
    plug-in iPod to PC
    error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
    un-plug > re-plug iPod (how many times?)
    iTunes un-installed from PC (?)
    iTunes RE-installed to PC (?)
    error message repeats(?)
    searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?)  EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
    then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
    CANNOT instead of can't [ tsk tsk ]
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    follow all the instructions in order and let us know

  • I recently downloaded a movie from itunes from my work computer and now I can't get it on my home computer. I have already hit the button add recent downloads.  I can

    I recently downloaded a movie from itunes from my work computer and now I can't get it on my home computer. I have already hit the button add recent downloads. Any suggestions?

    If it's a purchase, click here and follow the instructions.
    If it's a rental, you can't.
    (91159)

Maybe you are looking for

  • Pages 08: No "print date"?

    I am just testing iWork '08 and hope to replace MS Office soon. In MS Word documents I am used to set dates as date of printing ("Insert > Field > Date > PrintDate"). This comes very handy, because I usually want to have the date of the day when the

  • How do I copy photos from Camera Roll to personal photo album? iPhone 4 and pc

    I have an iPhone 4 and use pc.... I want to copy a few pics from Camera Roll to my personal album. I'd like to copy them and then remove them from Camera roll. Then, I'd like to be able to organize folders in my personal album so I don't have to look

  • Size of applet & scrollbars

    I start the applet from a html page with <applet....width="100%" Height="100%">. The problem is the components on the applet are created dynamically and can be changed to need a different size applet by changing a config file. The applet use table la

  • Multi-consumer queue table does not empty

    Hello, I must be missing something pretty trivial here but I have setup queue with a queue table where multiple_consumers = true. When I dequeue a message from the queue it is received, but the message is still left in the queue table. When I do a se

  • Most recently inserted row

    Hi, I have a table with a composite key on it's 4 columns(a,b,c,d). and i have another column called timestamp, which is used to identify when a record is inserted into the table. how to query which record is most recently inserted ? Any help is appr